search

knoxcu / snake-os

Automatically exported from code.google.com/p/snake-os
0 stars 0 forks source link

Printer port is shown the same on web interface #3

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
On Thu, Apr 1, 2010 at 08:10, BBBand <posta@bbband.it> wrote:

    Hi

    I have 2 printer on 1 NAS with snakeos last version (march 2010).

    The problem was that the nas view the 2 printers with the same TCP raw
    number (9100).
    Each printer can work stand alone. But when I insert the second any
    printer work in sent to the same printer...

Original issue reported on code.google.com by dgazi...@gmail.com on 1 Apr 2010 at 11:43

GoogleCodeExporter commented 9 years ago 
hello friend, I have the same problem...

Original comment by jasv6374...@gmail.com on 16 Apr 2010 at 8:42

GoogleCodeExporter commented 9 years ago 
I have the 2 NAS WLX-652 and NS-K330 with Snake last firmware installed. With 2
different printers attached to the NAS, they appears in the printers tab as 
"lp0" and
"lp1", but with the same "9100"
impression port for the 2 printers, and it's impossible to discriminate in 
Windows.
If disconnect 1 of them the other one attached works fine...
I was tested this issues with 2 different routers with same results...
Anybody has the solution?

Original comment by jasv6374...@gmail.com on 16 Apr 2010 at 9:38

GoogleCodeExporter commented 9 years ago 
Same here

Original comment by 4revhe...@gmail.com on 16 Apr 2010 at 11:32

GoogleCodeExporter commented 9 years ago 
The NAS were not accepting 2 or more printers.

Service startup and control pages fixed to allow for more printers.

Fix to be released on V1.1.0

Original comment by dgazi...@gmail.com on 17 Apr 2010 at 8:20