search

knutwurst / Marlin-2-0-x-Anycubic-i3-MEGA-S

Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
GNU General Public License v3.0
787 stars 187 forks source link

Tmc2225, default 32 subdivision? #165

Closed WenKwen closed 3 years ago

WenKwen commented 3 years ago

Tmc2225, default 32 subdivision? Due to the customized screen of anycubic-i3-mega-s

It is difficult to edit Marlin 2.0. X

Now the default 32 subdivision of tmc2225 causes that your firmware cannot be used

Can you give me a tutorial or 32 subdivision of mage-s TMC dgus firmware

The problem is: the sprinkler stopped before returning to the limit switch, and failed to hit the limit switch

WenKwen commented 3 years ago

The problem is: the nozzle stopped before returning to the limit switch and failed to hit the limit switch

WenKwen commented 3 years ago

Use 4988 normal use

Replace tmc2225 and confirm that the line sequence is correct and cannot return to the limit switch

knutwurst commented 3 years ago

There is only one Atmega2560 with 16Mhz on the Trigorilla mainboard. This would not create a 1/32 microstepping without stuttering. In my opinion, you only have the option of either exchanging the drivers for TMC2208 or 2209, or disconnecting the MS1 pin (see: https://wiki.fysetc.com/TMC2225/) and connecting it to ground. Bildschirmfoto 2021-06-21 um 17 59 36

WenKwen commented 3 years ago

11111

WenKwen commented 3 years ago

thank you,Thank you for your answer

github-actions[bot] commented 3 years ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.