Closed Catsuoo closed 2 years ago
This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.
I'm trying to reproduce the bug. Is there an SD card in the printer? If not, does that change anything?
Hi, thank you for your assistance! I would guess that the SD card was inside, but I'm not sure. I will retry with and without SD and let you know if it makes a difference.
It doesn't matter if the SD card is inserted or not
The issues is the same for the new version MEGA_X_v1.4.4.hex too.
I can confirm the described problem. The state of the sd card does not matter. The problem can be avoided, when putting in filament into the filament sensor at start-up.
Thank you for the info.
I do not use the sensor because there is not enough space for it in my cabinet. But i will try to connect it with a piece of filament inside to bypass the issue.
This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.
Bug Description
Hallo, bei der FW v1.4.3 zeigt mein Mega X (erste Generation mit DWIN/DGUS II Display) nach dem Startvorgang nur noch das Anycubic Logo an und reagiert auf keine Eingaben über den Touchscreen. Der Zugriff über Pronterface/Cura funktioniert.
Steps to Reproduce
Additional Information
Vorher installierte FW Versionen bei denen dieses Problem nicht aufgetreten ist: MEGA_X_v1.1.7.hex MEGA_X_v1.2.0.hex MEGA_X_v1.3.1.hex