search

knutwurst / Marlin-2-0-x-Anycubic-i3-MEGA-S

Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
GNU General Public License v3.0
788 stars 187 forks source link

[BUG]Resume printing problems (short description) #344

Closed XiaoYuYunshao closed 2 years ago

XiaoYuYunshao commented 2 years ago

你好 zusammen,

Bug After the machine stops after the material is cut off, click to resume printing, and printing cannot continue（MEGA_S_DGUS_TMC_v1.4.4.hex）

### Steps to Reproduce 1. [First Step] Click to pause printing during printing（or (it is detected that the consumables are gone when the material is cut off)） 2. [Second Step] Click reply to print（The temperature is restored to the set value） 3. [and so on...] The accumulated time starts from zero and the machine does not continue to print **Expected behavior:** [What you expect to happen] **Actual behavior:** [What actually happens] After printing for a few hours, the consumables were broken, the machine stopped, and the consumables were replaced, and the printing could not be continued, which was a little helpless. . . #### Additional Information * Provide pictures or links to videos that clearly demonstrate the issue. * See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
github-actions[bot] commented 2 years ago

This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.

SargFowler commented 2 years ago

I've got this issue too. The printer pauses, ejects filament, I load new filament and then nothing. I'm using PrusaSlicer which issues M600 to pause for filament change. Are the special menu options required?

knutwurst commented 2 years ago

Apologies for just now responding to this ticket. This is the same problem as described in ticket #350.

wk2uboot commented 2 years ago

Hello, First of all, thank you for the good work. I own a 4Max Pro V2 and use the 4MAXP2_DGUS_TMC_BLT_10_v1.4.4 firmware. Unfortunately, there is also the problem with the "Stop/Pause" function and resuming the job. After pressing the "Pause" button, the head moves out of the print area to (-X, +Y) (left, back). If you want to start the printer again, nothing happens and you have to start printing again. I have not yet tested how it behaves after pressing the "filament switch" on the 4Max pro V2. P.S.: ... I just tested the 4MAXP2_DGUS_TMC_10_v1.4.4 firmware (without "BLT"). The same problem exists here.

knutwurst commented 2 years ago

@wk2uboot Since this is a hybrid firmware, which is built for all Anycubic printers that are based on an Atmega256, this (known) error unfortunately also exists with every printer :(

Unfortunately, I haven't been able to fix the error lately. However, in 1.4.4 it is possible to pause and resume printing via gcode/usb. Just not with the display.

wk2uboot commented 2 years ago

Hello, Thanks for the answer. I hope that the problem will be solved for you later, because the printer should actually be a "stand-alone" solution. Unfortunately I can't program otherwise I would have liked to help. I'm already glad that I managed to install the BL sensor. Thanks again for your good work.

github-actions[bot] commented 2 years ago

This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.

github-actions[bot] commented 1 year ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.