Open dimar01 opened 4 months ago
Did you load the firmware defaults after flashing? To be honest: That doesn't sound so bad. It's about the maximum speed that the Z axis can use. I chose it like that so that Z-hops are also possible with the mega x. Since you have installed the TMC2209 driver, the other axes seem a lot quieter.
But you can also limit the maximum speed of Z via gcode. Then the printer is a bit slower, but also quieter.
Look at the video it doesn't work but live the noise is really loud and annoying. I also tried to put the file for the mega s printer and the noise disappears, but it doesn't take me home
Bug
After installing the new firmware (DGUS_TMC_v1.5.3) as well as TMC2209 drivers in my Mega X, the z-axis makes a lot of noise compared to the x- and y-axis
Steps to Reproduce
Expected behavior: silent axes
Actual behavior: noisy z axis
Additional Information
I'll upload a video to show the problem
https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/assets/107865762/a91f9a7d-a356-43c8-bf98-3cf9929d2171