search

knutwurst / Marlin-2-0-x-Anycubic-i3-MEGA-S

Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
GNU General Public License v3.0
782 stars 183 forks source link

[question] Mega i3 S Trigorilla v0.0.2 board / BLTouch don't work #67

Closed kaneyan1022 closed 3 years ago

kaneyan1022 commented 3 years ago

I purchased BLTouch and followed the steps to connect it to the Mega i3 S. https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english)

TEST1 passed, but TEST2 failed because the pin did not moved out. I couldn't get the pin out even with the command(M280 P0 S10). I checked the connection, but there is no problem. And I think that the firmware is correct.

When I turn on the printer, the blue LED light up for a moment, then turn red, and the pin moved in and out twice. The LED remains lit red.

After that, when I execute the command (M280 P0 S10), the pin does not come out.

Could you give me some advice on how to make it work?

Printer: Mega i3 S Bord: trigorilla 8bit v0.0.2 FW: MEGA_S_DGUS_BLT_10 MEGA_S_DGUS_BLT_11 (I tried both) BLTouch: Regular product(V3.1)

Any suggestions?

Thanks

kaneyan1022 commented 3 years ago

The Pins are on "S1".

kaneyan1022 commented 3 years ago

Hello

Was self resolved. Automatic mesh leveling worked by using a different pin.

-I used another pin. -Added a definition of another pin number as SERVO0_PIN to pins_TRIGORILLA_14.h.

github-actions[bot] commented 3 years ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.