Can't play the macro

[hardy021]

Hi everyone!

For the first time, i downloaded the zip and tried to use it. I can launch the program, i can record macro but i can't play them to do the same action again.

Just to know if i'm doing good :

• I press the "play" button
• Then, i press the record button
• I see the number of frame going higher and higher
• I press the stop then the record button.

I can save the macro in a xml file, see inside the macro what is recorded but i can't play this macro. When i press "play", i see the frame going from 0 to the end but nothing happen :/

Am i doing something wrong?

An other thing that maybe can help, i don't have the picture for the "stop" and "record" button

Thx for the help!

[ps5macro]

Hey there, I know you asked this a long time ago, so I hope you've got it going now. If not you're doing the steps slightly out of order.

You'll need a dualshock 4 plugged into the pc or have the emulation set to true. You'll first hit record and the line at the bottom right should turn red. You'll then hit play and do the inputs on the controller. You'll hit stop, then make sure to also toggle off the record button. It should go back to black. Once all that is one you should be able to hit play and your macro will run on a loop. You'll know it has worked because where the line in the corner is that will be replaced with number/numbers.

One thing to keep in mind is under playback there's the record on touch selected by default. That's the touchpad I usually will toggle that off to keep the app from going back into recording mode.