search

kororaproject / kp

Korora packaging tool
GNU General Public License v3.0
11 stars 13 forks source link

Wireless keeps dropping on Atheros chipset #35

Closed mustafa1024m closed 8 years ago

mustafa1024m commented 11 years ago

[16:39] root@localhost mustafa # lspci |grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I don't know if this is an upstream issue or not.

csmart commented 11 years ago

do you know what drive your kernel is using for this?

mustafa1024m commented 11 years ago

Hi Chris, it uses ath9k [19:21] root@localhost mustafa # lsmod |grep ath ath9k 150073 0 ath9k_common 13648 1 ath9k ath9k_hw 408113 2 ath9k_common,ath9k ath 23142 3 ath9k_common,ath9k,ath9k_hw mac80211 578735 1 ath9k cfg80211 495993 3 ath,ath9k,mac80211

csmart commented 11 years ago

Thanks.. can you see after you have a problem with it, can you paste result of dmesg command? Want to see if the kernel is spitting out any errors.

mustafa1024m commented 11 years ago

Attachment or paste here? I will paste dmesg result here: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.4-202.fc18.x86_64 (mockbuild@bkernel02) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Thu Mar 21 17:02:20 UTC 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4-202.fc18.x86_64 root=UUID=df607ec3-ca88-460f-b4fd-0741d8ccf8b8 ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rhgb quiet LANG=en_US.UTF-8 [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000baefefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO HuronRiver Platform/Emerald Lake, BIOS 44CN42WW 09/22/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff] [ 0.000000] [mem 0x00000000-0xbaffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fdfffff] [ 0.000000] [mem 0x100000000-0x23fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x23fdfffff @ [mem 0xbac81000-0xbac86fff] [ 0.000000] RAMDISK: [mem 0x34318000-0x36183fff] [ 0.000000] ACPI: RSDP 00000000000f0110 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000baffe120 00084 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000baff1000 09AC3 (v02 LENOVO SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf3d000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bafea000 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe9000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe6000 00256 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fdfffff] [ 0.000000] NODE_DATA [mem 0x23fdec000-0x23fdfffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbac86fff] [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff] [ 0.000000] node 0: [mem 0x100000000-0x23fdfffff] [ 0.000000] On node 0 totalpages: 2075157 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 141 pages reserved [ 0.000000] DMA zone: 3776 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11891 pages used for memmap [ 0.000000] DMA32 zone: 749077 pages, LIFO batch:31 [ 0.000000] Normal zone: 20472 pages used for memmap [ 0.000000] Normal zone: 1289736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bac87000 - 00000000baeff000 [ 0.000000] PM: Registered nosave memory: 00000000baeff000 - 00000000baf9f000 [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s84608 r8192 d21888 u262144 [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042589 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4-202.fc18.x86_64 root=UUID=df607ec3-ca88-460f-b4fd-0741d8ccf8b8 ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rhgb quiet LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8054768k/9435136k available (6514k kernel code, 1134508k absent, 245860k reserved, 6706k data, 1088k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:8448 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2194.956 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.91 BogoMIPS (lpj=2194956) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000036] Security Framework initialized [ 0.000042] SELinux: Initializing. [ 0.000051] SELinux: Starting in permissive mode [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002658] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003437] Mount-cache hash table entries: 256 [ 0.003609] Initializing cgroup subsys cpuacct [ 0.003612] Initializing cgroup subsys memory [ 0.003622] Initializing cgroup subsys devices [ 0.003624] Initializing cgroup subsys freezer [ 0.003625] Initializing cgroup subsys net_cls [ 0.003627] Initializing cgroup subsys blkio [ 0.003628] Initializing cgroup subsys perf_event [ 0.003654] Disabled fast string operations [ 0.003655] CPU: Physical Processor ID: 0 [ 0.003656] CPU: Processor Core ID: 0 [ 0.003661] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003664] mce: CPU supports 7 MCE banks [ 0.003676] CPU0: Thermal monitoring enabled (TM1) [ 0.003683] process: using mwait in idle threads [ 0.003686] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.003819] Freeing SMP alternatives: 24k freed [ 0.004907] ACPI: Core revision 20121018 [ 0.010339] ftrace: allocating 24318 entries in 95 pages [ 0.023126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.033119] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07) [ 0.033128] TSC deadline timer enabled [ 0.033132] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.033137] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.033139] ... version: 3 [ 0.033140] ... bit width: 48 [ 0.033141] ... generic registers: 4 [ 0.033142] ... value mask: 0000ffffffffffff [ 0.033143] ... max period: 000000007fffffff [ 0.033144] ... fixed-purpose events: 3 [ 0.033145] ... event mask: 000000070000000f [ 0.045362] Disabled fast string operations [ 0.047567] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.058669] Disabled fast string operations [ 0.071964] Disabled fast string operations [ 0.034349] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.074069] Brought up 4 CPUs [ 0.074073] smpboot: Total of 4 processors activated (17559.64 BogoMIPS) [ 0.077603] devtmpfs: initialized [ 0.077795] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff](655360 bytes) [ 0.078434] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.078462] RTC time: 16:57:06, date: 03/29/13 [ 0.078501] NET: Registered protocol family 16 [ 0.078653] ACPI: bus type pci registered [ 0.078718] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff](base 0xf8000000) [ 0.078721] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.084200] PCI: Using configuration type 1 for base access [ 0.084316] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.084317] mtrr: probably your BIOS does not setup all CPUs. [ 0.084318] mtrr: corrected configuration. [ 0.084958] bio: create slab at 0 [ 0.085036] ACPI: Added _OSI(Module Device) [ 0.085038] ACPI: Added _OSI(Processor Device) [ 0.085039] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.085041] ACPI: Added _OSI(Processor Aggregator Device) [ 0.086415] ACPI: EC: Look up EC in DSDT [ 0.087838] ACPI: Executed 1 blocks of module-level executable AML code [ 0.094517] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.094883] ACPI: SSDT 00000000baeef718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.095233] ACPI: Dynamic OEM Table Load: [ 0.095236] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.099682] ACPI: SSDT 00000000baef0a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.100060] ACPI: Dynamic OEM Table Load: [ 0.100062] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.103567] ACPI: SSDT 00000000baeeed98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.103914] ACPI: Dynamic OEM Table Load: [ 0.103915] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.108920] ACPI: Interpreter enabled [ 0.108923] ACPI: (supports S0 S1 S3 S4 S5) [ 0.108944] ACPI: Using IOAPIC for interrupt routing [ 0.113862] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.113984] ACPI: No dock devices found. [ 0.113988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.114252] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-3e]) [ 0.114254] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.114355] SB.PCI0:_OSC invalid UUID [ 0.114357] _OSC request data:1 8 1f [ 0.114386] SB.PCI0:_OSC invalid UUID [ 0.114386] _OSC request data:1 1f 1f [ 0.114390] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.114392] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.114899] PCI host bridge to bus 0000:00 [ 0.114902] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.114904] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.114908] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.114910] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.114911] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff] [ 0.114913] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.114921] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.114959] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.114970] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.114976] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.114981] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.115037] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.115061] pci 0000:00:16.0: reg 10: [mem 0xd0605000-0xd060500f 64bit] [ 0.115140] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.115176] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.115197] pci 0000:00:1a.0: reg 10: [mem 0xd060a000-0xd060a3ff] [ 0.115291] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.115319] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.115335] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit] [ 0.115406] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.115431] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.115518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.115545] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.115626] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.115655] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.115736] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.115771] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.115793] pci 0000:00:1d.0: reg 10: [mem 0xd0609000-0xd06093ff] [ 0.115886] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.115913] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.116043] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.116063] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.116071] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097] [ 0.116079] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.116087] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093] [ 0.116096] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.116104] pci 0000:00:1f.2: reg 24: [mem 0xd0608000-0xd06087ff] [ 0.116152] pci 0000:00:1f.2: PME# supported from D3hot [ 0.116172] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.116189] pci 0000:00:1f.3: reg 10: [mem 0xd0604000-0xd06040ff 64bit] [ 0.116210] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.116288] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.116382] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 [ 0.116429] pci 0000:02:00.0: reg 10: [mem 0xd0500000-0xd050ffff 64bit] [ 0.116661] pci 0000:02:00.0: supports D1 [ 0.116662] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.118524] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.118538] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] [ 0.118689] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.118753] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff] [ 0.118869] pci 0000:03:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref] [ 0.118943] pci 0000:03:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 0.119271] pci 0000:03:00.0: supports D1 D2 [ 0.119272] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.120543] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.120552] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.120571] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.120618] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP01._PRT] [ 0.120650] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP02._PRT] [ 0.120679] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP04._PRT] [ 0.120726] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.122957] ACPI: PCI Interrupt Link [LNKA](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123000] ACPI: PCI Interrupt Link [LNKB](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123039] ACPI: PCI Interrupt Link [LNKC](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123078] ACPI: PCI Interrupt Link [LNKD](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123117] ACPI: PCI Interrupt Link [LNKE](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123156] ACPI: PCI Interrupt Link [LNKF](IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.123195] ACPI: PCI Interrupt Link [LNKG](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123235] ACPI: PCI Interrupt Link [LNKH](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.123317] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.123320] vgaarb: loaded [ 0.123321] vgaarb: bridge control possible 0000:00:02.0 [ 0.123377] SCSI subsystem initialized [ 0.123379] ACPI: bus type scsi registered [ 0.123414] libata version 3.00 loaded. [ 0.123433] ACPI: bus type usb registered [ 0.123447] usbcore: registered new interface driver usbfs [ 0.123454] usbcore: registered new interface driver hub [ 0.123474] usbcore: registered new device driver usb [ 0.123523] PCI: Using ACPI for IRQ routing [ 0.125100] PCI: pci_cache_line_size set to 64 bytes [ 0.125182] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.125184] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff] [ 0.125185] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff] [ 0.125186] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff] [ 0.125261] NetLabel: Initializing [ 0.125262] NetLabel: domain hash size = 128 [ 0.125263] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.125271] NetLabel: unlabeled traffic allowed by default [ 0.125320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.125325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.127339] Switching to clocksource hpet [ 0.132011] pnp: PnP ACPI init [ 0.132026] ACPI: bus type pnp registered [ 0.132059] pnp 00:00: [dma 4] [ 0.132079] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.132098] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.132196] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.132225] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.132262] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.132264] system 00:04: [io 0xffff] has been reserved [ 0.132266] system 00:04: [io 0xffff] has been reserved [ 0.132268] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.132270] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.132271] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.132274] system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.132277] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132303] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.132354] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.132357] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.132423] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.132447] pnp 00:08: Plug and Play ACPI device, IDs SYN0326 SYN0300 SYN0002 PNP0f13 (active) [ 0.132559] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.132561] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.132563] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.132565] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.132566] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.132568] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.132570] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.132572] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.132574] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.132575] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.132577] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 0.132579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132783] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.132785] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.132787] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.132806] pnp: PnP ACPI: found 11 devices [ 0.132807] ACPI: ACPI bus type pnp unregistered [ 0.139234] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.139247] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.139253] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] [ 0.139261] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.139265] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.139273] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.139307] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.139309] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.139310] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.139312] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.139314] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.139315] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.139317] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.139319] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 0.139362] NET: Registered protocol family 2 [ 0.139554] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.139785] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.139913] TCP: Hash tables configured (established 65536 bind 65536) [ 0.139938] TCP: reno registered [ 0.139953] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.139986] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.140069] NET: Registered protocol family 1 [ 0.140081] pci 0000:00:02.0: Boot video device [ 0.140189] PCI: CLS 64 bytes, default 64 [ 0.140227] Unpacking initramfs... [ 0.711339] Freeing initrd memory: 31152k freed [ 0.716423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.716428] software IO TLB mem 0xb6c81000-0xbac81000 mapped at [ffff8800b6c81000-ffff8800bac80fff] [ 0.717079] Initialise module verification [ 0.717115] audit: initializing netlink socket (disabled) [ 0.717128] type=2000 audit(1364576226.705:1): initialized [ 0.742732] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.744027] VFS: Disk quotas dquot_6.5.2 [ 0.744064] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.744408] msgmni has been set to 15792 [ 0.744459] SELinux: Registering netfilter hooks [ 0.745036] alg: No test for stdrng (krng) [ 0.745046] NET: Registered protocol family 38 [ 0.745049] Key type asymmetric registered [ 0.745050] Asymmetric key parser 'x509' registered [ 0.745079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.745105] io scheduler noop registered [ 0.745107] io scheduler deadline registered [ 0.745116] io scheduler cfq registered (default) [ 0.745317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.745331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.745332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.745599] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.745600] vesafb: scrolling: redraw [ 0.745602] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.745900] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k [ 0.745966] Console: switching to colour frame buffer device 128x48 [ 0.804595] fb0: VESA VGA frame buffer device [ 0.804611] intel_idle: MWAIT substates: 0x21120 [ 0.804613] intel_idle: v0.4 model 0x2A [ 0.804615] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.809749] ACPI: AC Adapter ADP1 [ 0.809856] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.809878] ACPI: Lid Switch [LID0] [ 0.809907] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.809911] ACPI: Sleep Button [SLPB] [ 0.809935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.809938] ACPI: Power Button [PWRF] [ 0.810081] ACPI: Requesting acpi_cpufreq [ 0.815463] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.815466] ACPI: Thermal Zone [TZS0](59 C) [ 0.815645] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.815647] ACPI: Thermal Zone [TZS1](38 C) [ 0.815676] GHES: HEST is not enabled! [ 0.815736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.816340] ACPI: Battery Slot [BAT0](battery present) [ 0.816372] Non-volatile memory driver v1.3 [ 0.816373] Linux agpgart interface v0.103 [ 0.817051] loop: module loaded [ 0.817096] ahci 0000:00:1f.2: version 3.0 [ 0.817153] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.817185] ahci: SSS flag set, parallel bus scan disabled [ 0.827638] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode [ 0.827647] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.827657] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.833978] scsi0 : ahci [ 0.834047] scsi1 : ahci [ 0.834100] scsi2 : ahci [ 0.834151] scsi3 : ahci [ 0.834203] scsi4 : ahci [ 0.834254] scsi5 : ahci [ 0.834282] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 40 [ 0.834283] ata2: DUMMY [ 0.834284] ata3: DUMMY [ 0.834287] ata4: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608280 irq 40 [ 0.834290] ata5: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608300 irq 40 [ 0.834292] ata6: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608380 irq 40 [ 0.834360] libphy: Fixed MDIO Bus: probed [ 0.834422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.834424] ehci-pci: EHCI PCI platform driver [ 0.834454] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.834458] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.834503] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.834517] ehci-pci 0000:00:1a.0: debug port 2 [ 0.838405] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.838419] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd060a000 [ 0.843581] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.843621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.843626] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843631] usb usb1: Product: EHCI Host Controller [ 0.843635] usb usb1: Manufacturer: Linux 3.8.4-202.fc18.x86_64 ehci_hcd [ 0.843639] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.843754] hub 1-0:1.0: USB hub found [ 0.843757] hub 1-0:1.0: 2 ports detected [ 0.843849] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.843853] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.843886] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.843898] ehci-pci 0000:00:1d.0: debug port 2 [ 0.847793] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.847805] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0609000 [ 0.853579] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.853613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.853618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.853622] usb usb2: Product: EHCI Host Controller [ 0.853627] usb usb2: Manufacturer: Linux 3.8.4-202.fc18.x86_64 ehci_hcd [ 0.853631] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.853726] hub 2-0:1.0: USB hub found [ 0.853729] hub 2-0:1.0: 2 ports detected [ 0.853800] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.853807] uhci_hcd: USB Universal Host Controller Interface driver [ 0.853844] usbcore: registered new interface driver usbserial [ 0.853850] usbcore: registered new interface driver usbserial_generic [ 0.853856] usbserial: USB Serial support registered for generic [ 0.853882] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.856489] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.856494] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.856571] mousedev: PS/2 mouse device common for all mice [ 0.856720] rtc_cmos 00:05: RTC can wake from S4 [ 0.856852] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.856880] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.856954] device-mapper: uevent: version 1.0.3 [ 0.857007] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.857090] cpuidle: using governor ladder [ 0.857169] cpuidle: using governor menu [ 0.857345] EFI Variables Facility v0.08 2004-May-17 [ 0.857419] usbcore: registered new interface driver usbhid [ 0.857420] usbhid: USB HID core driver [ 0.857439] drop_monitor: Initializing network drop monitor service [ 0.857513] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.857540] TCP: cubic registered [ 0.857543] Initializing XFRM netlink socket [ 0.857643] NET: Registered protocol family 10 [ 0.857791] mip6: Mobile IPv6 [ 0.857794] NET: Registered protocol family 17 [ 0.858018] PM: Hibernation image not present or could not be loaded. [ 0.858019] Loading module verification certificates [ 0.859006] MODSIGN: Loaded cert 'Fedora kernel signing key: 788cecf11db6079306256d289baf652be28bc407' [ 0.859020] registered taskstats version 1 [ 0.859699] Magic number: 5:301:996 [ 0.859796] rtc_cmos 00:05: setting system clock to 2013-03-29 16:57:07 UTC (1364576227) [ 0.872013] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.138408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.145410] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.150294] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 1.150304] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.160182] ata1.00: configured for UDMA/133 [ 1.160651] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 1.161023] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.161059] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.161182] sd 0:0:0:0: [sda] Write Protect is off [ 1.161189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.161325] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.162432] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 sda4: <bsd:bad subpartition - ignored

[ 1.163519] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.259982] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.259992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.260460] hub 1-1:1.0: USB hub found [ 1.260714] hub 1-1:1.0: 6 ports detected [ 1.364102] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.466032] ata4: SATA link down (SStatus 0 SControl 300) [ 1.478741] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.478752] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.479251] hub 2-1:1.0: USB hub found [ 1.479458] hub 2-1:1.0: 6 ports detected [ 1.554133] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 1.616375] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 752809 [ 1.644932] usb 1-1.5: New USB device found, idVendor=5986, idProduct=0292 [ 1.644942] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.644948] usb 1-1.5: Product: Lenovo EasyCamera [ 1.644953] usb 1-1.5: Manufacturer: Bison Corp. [ 1.650802] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [ 1.717759] tsc: Refined TSC clocksource calibration: 2195.014 MHz [ 1.717772] Switching to clocksource tsc [ 1.754913] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 1.770699] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.772648] ata5.00: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100 [ 1.774809] ata5.00: configured for UDMA/100 [ 1.777151] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7710H A833 PQ: 0 ANSI: 5 [ 1.779975] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.779984] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.780344] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.780533] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.841116] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139 [ 1.841127] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.841133] usb 2-1.6: Product: USB2.0-CRW [ 1.841138] usb 2-1.6: Manufacturer: Generic [ 1.841142] usb 2-1.6: SerialNumber: 20100201396000000 [ 2.085359] ata6: SATA link down (SStatus 0 SControl 300) [ 2.089651] Freeing unused kernel memory: 1088k freed [ 2.090010] Write protecting the kernel read-only data: 12288k [ 2.101867] Freeing unused kernel memory: 1668k freed [ 2.111962] Freeing unused kernel memory: 1348k freed [ 2.167276] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.167556] systemd[1]: Running in initial RAM disk. [ 2.167823] systemd[1]: No hostname configured. [ 2.167836] systemd[1]: Set hostname to . [ 2.168075] systemd[1]: Initializing machine ID from random generator. [ 2.191020] systemd[1]: Starting Encrypted Volumes. [ 2.191062] systemd[1]: Reached target Encrypted Volumes. [ 2.191248] systemd[1]: Starting udev Kernel Socket. [ 2.191329] systemd[1]: Listening on udev Kernel Socket. [ 2.191463] systemd[1]: Starting udev Control Socket. [ 2.191545] systemd[1]: Listening on udev Control Socket. [ 2.191571] systemd[1]: Starting Journal Socket. [ 2.191678] systemd[1]: Listening on Journal Socket. [ 2.191706] systemd[1]: Starting dracut cmdline hook... [ 2.207766] systemd[1]: Started Load Kernel Modules. [ 2.207801] systemd[1]: Starting Journal Service... [ 2.223491] systemd[1]: Started Journal Service. [ 2.223986] systemd[1]: Starting Sockets. [ 2.224038] systemd[1]: Reached target Sockets. [ 2.224110] systemd[1]: Starting Swap. [ 2.224153] systemd[1]: Reached target Swap. [ 2.224186] systemd[1]: Starting Local File Systems. [ 2.224224] systemd[1]: Reached target Local File Systems. [ 2.513469] RPC: Registered named UNIX socket transport module. [ 2.513472] RPC: Registered udp transport module. [ 2.513473] RPC: Registered tcp transport module. [ 2.513475] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.586757] systemd-udevd[170]: starting version 197 [ 2.817467] wmi: Mapper loaded [ 2.824112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.824530] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 2.824789] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000c76000, f0:de:f1:a5:35:e3, XID 0c200000 IRQ 41 [ 2.824793] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.827755] [drm] Initialized drm 1.1.0 20060810 [ 2.853500] [drm] Memory usable by graphics device = 2048M [ 2.853509] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 2.853512] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 2.853530] Console: switching to colour dummy device 80x25 [ 2.853619] i915 0000:00:02.0: setting latency timer to 64 [ 2.890766] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.890790] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.890793] [drm] Driver supports precise vblank timestamp query. [ 2.890869] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.895720] systemd-udevd[210]: renamed network interface eth0 to p3p1 [ 2.965732] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.979970] fbcon: inteldrmfb (fb0) is primary device [ 3.046701] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.842463] Console: switching to colour frame buffer device 170x48 [ 3.849532] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.849535] i915 0000:00:02.0: registered panic notifier [ 3.863771] ACPI Error: Current brightness invalid (20121018/video-376) [ 3.864467] ACPI: Video Device [GFX0](multi-head: yes rom: no post: no) [ 3.864649] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 [ 3.864878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.276406] systemd-journald[78]: Received SIGTERM [ 4.344817] type=1404 audit(1364576230.988:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 4.381145] SELinux: 2048 avtab hash slots, 95819 rules. [ 4.397739] SELinux: 2048 avtab hash slots, 95819 rules. [ 4.609810] SELinux: 9 users, 15 roles, 4384 types, 243 bools, 1 sens, 1024 cats [ 4.609814] SELinux: 83 classes, 95819 rules [ 4.613821] SELinux: Permission attach_queue in class tun_socket not defined in policy. [ 4.613824] SELinux: the above unknown classes and permissions will be allowed [ 4.613832] SELinux: Completing initialization. [ 4.613833] SELinux: Setting up existing superblocks. [ 4.613838] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.613842] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 4.613850] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 4.613854] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 4.613861] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.613891] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 4.614556] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 4.614560] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 4.615118] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 4.615125] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 4.615127] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 4.615143] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 4.615149] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 4.615155] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 4.615164] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.615399] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 4.615401] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.615406] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.615522] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.615556] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615560] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615566] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615582] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615589] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615593] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615596] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615600] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615605] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.615611] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 4.615620] SELinux: initialized (dev sda2, type ext4), uses xattr [ 4.633134] type=1403 audit(1364576231.276:3): policy loaded auid=4294967295 ses=4294967295 [ 4.643706] systemd[1]: Successfully loaded SELinux policy in 300ms 962us. [ 4.675041] systemd[1]: Relabelled /dev and /run in 18ms 260us. [ 4.702526] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.887407] systemd-readahead[354]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 4.889578] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 4.910557] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.007871] systemd-udevd[362]: starting version 197 [ 5.014853] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.087093] EXT4-fs (sda2): re-mounted. Opts: (null) [ 5.111141] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6 [ 5.124597] mei 0000:00:16.0: setting latency timer to 64 [ 5.124656] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 5.136736] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 5.136745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.136750] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 5.136753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.136756] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 5.136759] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.136761] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 5.136764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.136765] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.147563] cfg80211: Calling CRDA to update world regulatory domain [ 5.164839] media: Linux media interface: v0.10 [ 5.171749] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region SB.PCI0.SBUS.SMBI 1 (20121018/utaddress-251) [ 5.171758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.173268] Linux video capture interface: v2.00 [ 5.199218] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 5.208182] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292) [ 5.212549] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7 [ 5.212875] usbcore: registered new interface driver uvcvideo [ 5.212878] USB Video Class driver (1.1.1) [ 5.214947] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 5.222073] ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x40179a2d [ 5.222078] ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1 [ 5.222080] ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x1 [ 5.222083] ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000007 [ 5.222085] ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x0000009a [ 5.222087] ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x5 [ 5.222088] ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x1 [ 5.222090] ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0 [ 5.222092] ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1 [ 5.222099] ALSA sound/pci/hda/hda_auto_parser.c:306 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.222105] ALSA sound/pci/hda/hda_auto_parser.c:310 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.222107] ALSA sound/pci/hda/hda_auto_parser.c:314 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.222109] ALSA sound/pci/hda/hda_auto_parser.c:315 mono: mono_out=0x0 [ 5.222111] ALSA sound/pci/hda/hda_auto_parser.c:319 inputs: [ 5.222114] ALSA sound/pci/hda/hda_auto_parser.c:323 Mic=0x18 [ 5.222117] ALSA sound/pci/hda/hda_auto_parser.c:323 Internal Mic=0x12 [ 5.223404] ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d [ 5.223408] ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0272 [ 5.224264] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 5.224375] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 5.224761] microcode: CPU1 updated to revision 0x28, date = 2012-04-24 [ 5.224864] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b [ 5.225248] microcode: CPU2 updated to revision 0x28, date = 2012-04-24 [ 5.225649] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b [ 5.226041] microcode: CPU3 updated to revision 0x28, date = 2012-04-24 [ 5.226045] perf_event_intel: PEBS enabled due to microcode update [ 5.226177] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba [ 5.251890] ath: phy0: ASPM enabled: 0x43 [ 5.251895] ath: EEPROM regdomain: 0x65 [ 5.251896] ath: EEPROM indicates we should expect a direct regpair map [ 5.251899] ath: Country alpha2 being used: 00 [ 5.251901] ath: Regpair used: 0x65 [ 5.270776] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 5.271132] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004fc0000, irq=17 [ 5.273511] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.274305] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.274420] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.302413] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.307428] iTCO_vendor_support: vendor-support=0 [ 5.309303] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.309343] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 5.309711] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.313439] cfg80211: World regulatory domain updated: [ 5.313442] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.313444] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.313446] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.313447] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.313448] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.313449] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.317348] acer_wmi: Brightness must be controlled by acpi video driver [ 5.319039] input: Acer BMA150 accelerometer as /devices/virtual/input/input11 [ 5.321207] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 5.356360] cfg80211: Calling CRDA for country: IQ [ 5.411421] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 5.692676] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 5.692687] SELinux: initialized (dev sda7, type ext4), uses xattr [ 6.198911] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.210031] Ebtables v2.0 registered [ 6.258645] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.364513] systemd-journald[435]: Received SIGUSR1 [ 6.605616] Bluetooth: Core ver 2.16 [ 6.605696] NET: Registered protocol family 31 [ 6.605699] Bluetooth: HCI device and connection manager initialized [ 6.605707] Bluetooth: HCI socket layer initialized [ 6.605710] Bluetooth: L2CAP socket layer initialized [ 6.605718] Bluetooth: SCO socket layer initialized [ 6.605720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.621480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.621484] Bluetooth: BNEP filters: protocol multicast [ 6.621496] Bluetooth: BNEP socket layer initialized [ 6.749176] r8169 0000:03:00.0 p3p1: link down [ 6.749244] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready [ 6.865237] Disabling lock debugging due to kernel taint [ 6.866304] /dev/vmmon[852]: Module vmmon: registered with major=10 minor=165 [ 6.866309] /dev/vmmon[852]: Module vmmon: initialized [ 6.880035] [862]: VMCI: shared components initialized. [ 6.880072] [862]: VMCI: host components initialized. [ 6.880466] [862]: VMCI: Module registered (name=vmci,major=10,minor=57). [ 6.880469] [862]: VMCI: Using host personality [ 6.880471] [862]: VMCI: Module (name=vmci) is initialized [ 6.939417] fuse init (API version 7.20) [ 6.961129] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 6.984347] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 7.005776] ppdev: user-space parallel port driver [ 7.044832] netlink: 12 bytes leftover after parsing attributes. [ 7.044838] netlink: 12 bytes leftover after parsing attributes. [ 7.044873] netlink: 12 bytes leftover after parsing attributes. [ 7.571750] /dev/vmnet: open called by PID 1128 (vmnet-netifup) [ 7.571771] /dev/vmnet: hub 1 does not exist, allocating memory. [ 7.571835] /dev/vmnet: port on hub 1 successfully opened [ 7.593606] /dev/vmnet: open called by PID 1132 (vmnet-dhcpd) [ 7.593617] /dev/vmnet: port on hub 1 successfully opened [ 7.598553] /dev/vmnet: open called by PID 1139 (vmnet-natd) [ 7.598571] /dev/vmnet: hub 8 does not exist, allocating memory. [ 7.598610] /dev/vmnet: port on hub 8 successfully opened [ 7.598796] netlink: 12 bytes leftover after parsing attributes. [ 7.598809] netlink: 12 bytes leftover after parsing attributes. [ 7.598838] netlink: 12 bytes leftover after parsing attributes. [ 7.598954] netlink: 12 bytes leftover after parsing attributes. [ 7.601984] /dev/vmnet: open called by PID 1141 (vmnet-netifup) [ 7.601997] /dev/vmnet: port on hub 8 successfully opened [ 7.615346] /dev/vmnet: open called by PID 1145 (vmnet-dhcpd) [ 7.615359] /dev/vmnet: port on hub 8 successfully opened [ 8.498189] cfg80211: Calling CRDA to update world regulatory domain [ 8.510857] cfg80211: World regulatory domain updated: [ 8.510865] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.510871] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.510875] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.510878] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.510881] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.510884] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.724603] wlan0: authenticate with 90:f6:52:73:26:ca [ 8.730191] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 8.737180] wlan0: send auth to 90:f6:52:73:26:ca (try 1/3) [ 8.739190] wlan0: authenticated [ 8.739933] wlan0: associate with 90:f6:52:73:26:ca (try 1/3) [ 8.744172] wlan0: RX AssocResp from 90:f6:52:73:26:ca (capab=0x431 status=0 aid=2) [ 8.744296] wlan0: associated [ 8.744317] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8.793189] /dev/vmnet: open called by PID 1031 (vmnet-bridge) [ 8.793217] /dev/vmnet: hub 0 does not exist, allocating memory. [ 8.793278] /dev/vmnet: port on hub 0 successfully opened [ 8.793320] bridge-wlan0: device is wireless, enabling SMAC [ 8.793329] bridge-wlan0: up [ 8.793337] bridge-wlan0: attached [ 8.993258] userif-2: sent link down event. [ 8.993267] userif-2: sent link up event. [ 9.236841] userif-2: sent link down event. [ 9.236848] userif-2: sent link up event. [ 10.247524] userif-2: sent link down event. [ 10.247530] userif-2: sent link up event. [ 87.550998] bridge-wlan0: disabling the bridge on dev down [ 87.551506] bridge-wlan0: down [ 87.551513] bridge-wlan0: detached [ 87.590757] cfg80211: Calling CRDA to update world regulatory domain [ 87.603918] cfg80211: World regulatory domain updated: [ 87.603922] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 87.603925] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.603926] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.603928] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 87.603929] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.603930] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.750142] userif-2: sent link down event. [ 87.750146] userif-2: sent link up event. [ 88.616484] wlan0: authenticate with 90:f6:52:73:26:ca [ 88.622533] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 88.629474] wlan0: send auth to 90:f6:52:73:26:ca (try 1/3) [ 88.829694] wlan0: send auth to 90:f6:52:73:26:ca (try 2/3) [ 89.030862] wlan0: send auth to 90:f6:52:73:26:ca (try 3/3) [ 89.232031] wlan0: authentication with 90:f6:52:73:26:ca timed out [ 96.205331] wlan0: authenticate with 90:f6:52:73:26:ca [ 96.211535] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 96.218406] wlan0: direct probe to 90:f6:52:73:26:ca (try 1/3) [ 96.419493] wlan0: direct probe to 90:f6:52:73:26:ca (try 2/3) [ 96.620573] wlan0: direct probe to 90:f6:52:73:26:ca (try 3/3) [ 96.821652] wlan0: authentication with 90:f6:52:73:26:ca timed out [ 103.474617] userif-2: sent link down event. [ 103.474629] userif-2: sent link up event.

mustafa1024m commented 11 years ago

It happens on one wireless network but not on the other! I don't know why!!

csmart commented 11 years ago

Hmm ok.. if it's your wireless access point/router, can you try updating it to the latest firmware that's available from the manufacturer?