search

koudshoorn / back-up

1 stars 0 forks source link

At paparazzi center select at "A/C" the ardrone2 #2

Open glason opened 11 years ago

glason commented 11 years ago

I'm sorry but I followed your steps on paparazzi wiki (http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I built my paparazzi code, I just could not find "ardrone2" at "A/C". can you help me or can you tell me what are the configuration xml files of "ardrone2"?

koudshoorn commented 11 years ago

I'm not sure if you're working in the master branch or in one of the minor branches. In case you're working in the master branch i suggest trying to checkout the minor1 branch and see if this solves your problem. I checked gitup and haven't seen the ardrone2.xml in the airframe folder so this might explain why. In case you are working in one of the minor branches, that would probably mean that there's a small error in the wiki. You probably need to make your own setup first and save it as ardrone2 or w/e you like to call it. I can't say at the moment which files you'd need to use, altough ardrone2.xml as airframe is one of them.
If you can't figure it out email me again and i'll try to look it up for you. Date: Mon, 11 Mar 2013 22:41:01 -0700 From: notifications@github.com To: back-up@noreply.github.com Subject: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

I'm sorry but I followed your steps on paparazzi wiki (http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files of "ardrone2"?

— Reply to this email directly or view it on GitHub.

glason commented 11 years ago

Thanks for your reply. I'm working in minor1 branch. Here are my configuration files of ardrone2. Airframe: ardrone2.xml Flight plan: rotorcraft_basic.xml Settings: rotorcraft_basic.xml, rotorcraft_guidance.xml, stabilization _att_int.xml, stabilization_rate.xml Radio: cockpitSX.xml Telemetry: default_rotorcraft.xml Is it OK? Thanks again:) ÔÚ 2013-3-12 ÏÂÎç7:39£¬"koudshoorn" notifications@github.comдµÀ£º

I'm not sure if you're working in the master branch or in one of the minor branches. In case you're working in the master branch i suggest trying to checkout the minor1 branch and see if this solves your problem. I checked gitup and haven't seen the ardrone2.xml in the airframe folder so this might explain why. In case you are working in one of the minor branches, that would probably mean that there's a small error in the wiki. You probably need to make your own setup first and save it as ardrone2 or w/e you like to call it. I can't say at the moment which files you'd need to use, altough ardrone2.xml as airframe is one of them. If you can't figure it out email me again and i'll try to look it up for you. Date: Mon, 11 Mar 2013 22:41:01 -0700 From: notifications@github.com To: back-up@noreply.github.com Subject: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

I'm sorry but I followed your steps on paparazzi wiki ( http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files of "ardrone2"?

¡ª Reply to this email directly or view it on GitHub.

¡ª Reply to this email directly or view it on GitHubhttps://github.com/koudshoorn/back-up/issues/2#issuecomment-14770485 .

koudshoorn commented 11 years ago

You could use flight_plans/dummy.xml for flightplan. As for settings, in my old setup i only found rotorcraft_basic.xml . I'm not sure if you should include the other settings though. The rest is the same as I have. If you still have doubts, you could try asking Dino Hensen. He's the guy who worked the entire project on paparazzi and he's more knowledgeable about it than me.

Date: Tue, 12 Mar 2013 04:56:00 -0700 From: notifications@github.com To: back-up@noreply.github.com CC: kaj_oudshoorn@hotmail.com Subject: Re: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

Thanks for your reply.

I'm working in minor1 branch.

Here are my configuration files of ardrone2.

Airframe: ardrone2.xml

Flight plan: rotorcraft_basic.xml

Settings: rotorcraft_basic.xml, rotorcraft_guidance.xml, stabilization

_att_int.xml, stabilization_rate.xml

Radio: cockpitSX.xml

Telemetry: default_rotorcraft.xml

Is it OK?

Thanks again:)

ÔÚ 2013-3-12 ÏÂÎç7:39£¬"koudshoorn" notifications@github.comдµÀ£º

I'm not sure if you're working in the master branch or in one of the minor

branches. In case you're working in the master branch i suggest trying to

checkout the minor1 branch and see if this solves your problem. I checked

gitup and haven't seen the ardrone2.xml in the airframe folder so this

might explain why.

In case you are working in one of the minor branches, that would probably

mean that there's a small error in the wiki. You probably need to make your

own setup first and save it as ardrone2 or w/e you like to call it. I can't

say at the moment which files you'd need to use, altough ardrone2.xml as

airframe is one of them.

If you can't figure it out email me again and i'll try to look it up for

you.

Date: Mon, 11 Mar 2013 22:41:01 -0700

From: notifications@github.com

To: back-up@noreply.github.com

Subject: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

I'm sorry but I followed your steps on paparazzi wiki (

http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I

built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files of

"ardrone2"?

¡ª

Reply to this email directly or view it on GitHub.

¡ª

Reply to this email directly or view it on GitHubhttps://github.com/koudshoorn/back-up/issues/2#issuecomment-14770485

.

— Reply to this email directly or view it on GitHub.

glason commented 11 years ago

OK. This project is great! Hope for more good news. Thanks again. 在 2013-3-12 下午9:24，"koudshoorn" notifications@github.com写道：

You could use flight_plans/dummy.xml for flightplan. As for settings, in my old setup i only found rotorcraft_basic.xml . I'm not sure if you should include the other settings though. The rest is the same as I have. If you still have doubts, you could try asking Dino Hensen. He's the guy who worked the entire project on paparazzi and he's more knowledgeable about it than me.

Date: Tue, 12 Mar 2013 04:56:00 -0700 From: notifications@github.com To: back-up@noreply.github.com CC: kaj_oudshoorn@hotmail.com Subject: Re: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

Thanks for your reply.

I'm working in minor1 branch.

Here are my configuration files of ardrone2.

Airframe: ardrone2.xml

Flight plan: rotorcraft_basic.xml

Settings: rotorcraft_basic.xml, rotorcraft_guidance.xml, stabilization

_att_int.xml, stabilization_rate.xml

Radio: cockpitSX.xml

Telemetry: default_rotorcraft.xml

Is it OK?

Thanks again:)

ÔÚ 2013-3-12 ÏÂÎç7:39£¬"koudshoorn" notifications@github.comдµÀ£º

I'm not sure if you're working in the master branch or in one of the minor

branches. In case you're working in the master branch i suggest trying to

checkout the minor1 branch and see if this solves your problem. I checked

gitup and haven't seen the ardrone2.xml in the airframe folder so this

might explain why.

In case you are working in one of the minor branches, that would probably

mean that there's a small error in the wiki. You probably need to make your

own setup first and save it as ardrone2 or w/e you like to call it. I can't

say at the moment which files you'd need to use, altough ardrone2.xml as

airframe is one of them.

If you can't figure it out email me again and i'll try to look it up for

you.

Date: Mon, 11 Mar 2013 22:41:01 -0700

From: notifications@github.com

To: back-up@noreply.github.com

Subject: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

I'm sorry but I followed your steps on paparazzi wiki (

http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I

built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files of

"ardrone2"?

¡ª

Reply to this email directly or view it on GitHub.

¡ª

Reply to this email directly or view it on GitHub< https://github.com/koudshoorn/back-up/issues/2#issuecomment-14770485>

.

— Reply to this email directly or view it on GitHub.

— Reply to this email directly or view it on GitHubhttps://github.com/koudshoorn/back-up/issues/2#issuecomment-14774623 .

glason commented 11 years ago

Hi, well, I try to ask Dino Hensen for help, but i can't find his email address on the Github. I have another problem. When i press "upload" button in Paparazzi Center, I get such errors.

ARDrone2 BUILD ARDrone2, TARGET ap make[1]: Entering directory /home/bourne/develop/paparazzi' make[1]: Leaving directory/home/bourne/develop/paparazzi' make[1]: Entering directory /home/bourne/develop/paparazzi' make[1]: Nothing to be done forradio_ac_h'. make[1]: Leaving directory /home/bourne/develop/paparazzi' make[1]: Entering directory/home/bourne/develop/paparazzi' make[1]: Nothing to be done for flight_plan_ac_h'. make[1]: Leaving directory/home/bourne/develop/paparazzi' cd sw/airborne; make TARGET=ap all make[1]: Entering directory /home/bourne/develop/paparazzi/sw/airborne' make[1]: Nothing to be done forall'. make[1]: Leaving directory /home/bourne/develop/paparazzi/sw/airborne' cd sw/airborne; make TARGET=ap upload make[1]: Entering directory/home/bourne/develop/paparazzi/sw/airborne' echo -n "anonymous\nput /home/bourne/develop/paparazzi/var/ARDrone2/ap/ap.elf /bin/ap.elf\nquit" | ftp 192.168.1.1 Name (192.168.1.1:root): Error make[1]: Leaving directory /home/bourne/develop/paparazzi/sw/airborne' make: Leaving directory/home/bourne/develop/paparazzi'

DONE (exec make -C /home/bourne/develop/paparazzi -f Makefile.ac AIRCRAFT=ARDrone2 ap.upload 2>&1)

I run my Paparazzi Center with root account, so the error is "Name(192.168.1.1:root):Error". I don't know why. Is there something i did wrong or do I miss something important? Some files I should configure? By the way, could you give me the email address of Dino Hensen? If he do not mind.

2013/3/12 甲圣 jiasheng55@gmail.com

OK. This project is great! Hope for more good news. Thanks again. 在 2013-3-12 下午9:24，"koudshoorn" notifications@github.com写道：

You could use flight_plans/dummy.xml for flightplan. As for settings, in my old setup i only found rotorcraft_basic.xml . I'm not sure if you should include the other settings though. The rest is the same as I have. If you still have doubts, you could try asking Dino Hensen. He's the guy who worked the entire project on paparazzi and he's more knowledgeable about it than me.

Date: Tue, 12 Mar 2013 04:56:00 -0700 From: notifications@github.com To: back-up@noreply.github.com CC: kaj_oudshoorn@hotmail.com Subject: Re: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

Thanks for your reply.

I'm working in minor1 branch.

Here are my configuration files of ardrone2.

Airframe: ardrone2.xml

Flight plan: rotorcraft_basic.xml

Settings: rotorcraft_basic.xml, rotorcraft_guidance.xml, stabilization

_att_int.xml, stabilization_rate.xml

Radio: cockpitSX.xml

Telemetry: default_rotorcraft.xml

Is it OK?

Thanks again:)

ÔÚ 2013-3-12 ÏÂÎç7:39£¬"koudshoorn" notifications@github.comдµÀ£º

I'm not sure if you're working in the master branch or in one of the minor

branches. In case you're working in the master branch i suggest trying to

checkout the minor1 branch and see if this solves your problem. I checked

gitup and haven't seen the ardrone2.xml in the airframe folder so this

might explain why.

In case you are working in one of the minor branches, that would probably

mean that there's a small error in the wiki. You probably need to make your

own setup first and save it as ardrone2 or w/e you like to call it. I can't

say at the moment which files you'd need to use, altough ardrone2.xml as

airframe is one of them.

If you can't figure it out email me again and i'll try to look it up for

you.

Date: Mon, 11 Mar 2013 22:41:01 -0700

From: notifications@github.com

To: back-up@noreply.github.com

Subject: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

I'm sorry but I followed your steps on paparazzi wiki (

http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I

built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files of

"ardrone2"?

¡ª

Reply to this email directly or view it on GitHub.

¡ª

Reply to this email directly or view it on GitHub< https://github.com/koudshoorn/back-up/issues/2#issuecomment-14770485>

.

— Reply to this email directly or view it on GitHub.

— Reply to this email directly or view it on GitHubhttps://github.com/koudshoorn/back-up/issues/2#issuecomment-14774623 .

koudshoorn commented 11 years ago

According to the wiki there's supposed to be an error. Altough I don't know what kind of error it's supposed to be. Dino's email is dino.hensen@gmail.com. He'll probably know what to do. Wish you good luck and sorry for not being able to help much.

Date: Sun, 17 Mar 2013 00:06:35 -0700 From: notifications@github.com To: back-up@noreply.github.com CC: kaj_oudshoorn@hotmail.com Subject: Re: [back-up] At paparazzi center select at "A/C" the ardrone2 (#2)

Hi, well, I try to ask Dino Hensen for help, but i can't find his email

address on the Github.

I have another problem. When i press "upload" button in Paparazzi Center, I

get such errors.

ARDrone2

BUILD ARDrone2, TARGET ap

make[1]: Entering directory `/home/bourne/develop/paparazzi'

make[1]: Leaving directory `/home/bourne/develop/paparazzi'

make[1]: Entering directory `/home/bourne/develop/paparazzi'

make[1]: Nothing to be done for `radio_ac_h'.

make[1]: Leaving directory `/home/bourne/develop/paparazzi'

make[1]: Entering directory `/home/bourne/develop/paparazzi'

make[1]: Nothing to be done for `flight_plan_ac_h'.

make[1]: Leaving directory `/home/bourne/develop/paparazzi'

cd sw/airborne; make TARGET=ap all

make[1]: Entering directory `/home/bourne/develop/paparazzi/sw/airborne'

make[1]: Nothing to be done for `all'.

make[1]: Leaving directory `/home/bourne/develop/paparazzi/sw/airborne'

cd sw/airborne; make TARGET=ap upload

make[1]: Entering directory `/home/bourne/develop/paparazzi/sw/airborne'

echo -n "anonymous\nput

/home/bourne/develop/paparazzi/var/ARDrone2/ap/ap.elf /bin/ap.elf\nquit" |

ftp 192.168.1.1

Name (192.168.1.1:root): Error

make[1]: Leaving directory `/home/bourne/develop/paparazzi/sw/airborne'

make: Leaving directory `/home/bourne/develop/paparazzi'

DONE (exec make -C /home/bourne/develop/paparazzi -f Makefile.ac

AIRCRAFT=ARDrone2 ap.upload 2>&1)

I run my Paparazzi Center with root account, so the error is

"Name(192.168.1.1:root):Error". I don't know why. Is there something i did

wrong or do I miss something important? Some files I should configure?

By the way, could you give me the email address of Dino Hensen? If he do

not mind.

2013/3/12 甲圣 jiasheng55@gmail.com

OK. This project is great! Hope for more good news. Thanks again.

在 2013-3-12 下午9:24，"koudshoorn" notifications@github.com写道：

You could use flight_plans/dummy.xml for flightplan. As for settings, in

my old setup i only found rotorcraft_basic.xml . I'm not sure if you should

include the other settings though. The rest is the same as I have.

If you still have doubts, you could try asking Dino Hensen. He's the guy

who worked the entire project on paparazzi and he's more knowledgeable

about it than me.

Date: Tue, 12 Mar 2013 04:56:00 -0700

From: notifications@github.com

To: back-up@noreply.github.com

CC: kaj_oudshoorn@hotmail.com

Subject: Re: [back-up] At paparazzi center select at "A/C" the ardrone2

(#2)

Thanks for your reply.

I'm working in minor1 branch.

Here are my configuration files of ardrone2.

Airframe: ardrone2.xml

Flight plan: rotorcraft_basic.xml

Settings: rotorcraft_basic.xml, rotorcraft_guidance.xml, stabilization

_att_int.xml, stabilization_rate.xml

Radio: cockpitSX.xml

Telemetry: default_rotorcraft.xml

Is it OK?

Thanks again:)

ÔÚ 2013-3-12 ÏÂÎç7:39£¬"koudshoorn" notifications@github.comдµÀ£º

I'm not sure if you're working in the master branch or in one of the

minor

branches. In case you're working in the master branch i suggest trying

to

checkout the minor1 branch and see if this solves your problem. I

checked

gitup and haven't seen the ardrone2.xml in the airframe folder so this

might explain why.

In case you are working in one of the minor branches, that would

probably

mean that there's a small error in the wiki. You probably need to make

your

own setup first and save it as ardrone2 or w/e you like to call it. I

can't

say at the moment which files you'd need to use, altough ardrone2.xml

as

airframe is one of them.

If you can't figure it out email me again and i'll try to look it up

for

you.

Date: Mon, 11 Mar 2013 22:41:01 -0700

From: notifications@github.com

To: back-up@noreply.github.com

Subject: [back-up] At paparazzi center select at "A/C" the ardrone2

(#2)

I'm sorry but I followed your steps on paparazzi wiki (

http://paparazzi.enac.fr/wiki/AR_Drone_2/getting_started) and after I

built my paparazzi code, I just could not find "ardrone2" at "A/C".

can you help me or can you tell me what are the configuration xml files

of

"ardrone2"?

¡ª

Reply to this email directly or view it on GitHub.

¡ª

Reply to this email directly or view it on GitHub<

https://github.com/koudshoorn/back-up/issues/2#issuecomment-14770485>

.

—

Reply to this email directly or view it on GitHub.

—

Reply to this email directly or view it on GitHubhttps://github.com/koudshoorn/back-up/issues/2#issuecomment-14774623

.

— Reply to this email directly or view it on GitHub.