Closed shizonic closed 5 years ago
kovidgoyal
commented
5 years ago I'm not sure what you mean. There are no margins (window_margin_width is zero be default). If the overall size of the window is not a multiple of the cell width then there will be some margins to acoomodat that, but that is all.
shizonic
commented
5 years ago Sorry, I should have had attached some screens and my config but I am writing on mobile currently. But I will do that asap so you should see what I mean. Thanks anyway for the quick reply.
shizonic
commented
5 years ago 
Please have a look at this. Hope this helps more to understand what I mean.
kovidgoyal
commented
5 years ago that looks like you have set window_padding_width to a non-zero value. zero is the default. See for example: https://sw.kovidgoyal.net/kitty/_images/screenshot.png
shizonic
commented
5 years ago @kovidgoyal Thanks for your quick reply. You are correct, but even if I unset window_padding_width the same behaviour occures:
This is my config:
# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
#: Fonts {{{
#: kitty has very powerful font management. You can configure
#: individual font faces and even specify special fonts for particular
#: characters.
# font_family Source Code Pro Semibold
font_family Operator Mono Lig Medium
bold_font auto
italic_font auto
bold_italic_font auto
#: You can specify different fonts for the bold/italic/bold-italic
#: variants. By default they are derived automatically, by the OSes
#: font system. Setting them manually is useful for font families that
#: have many weight variants like Book, Medium, Thick, etc. For
#: example::
#: font_family Operator Mono Book
#: bold_font Operator Mono Medium
#: italic_font Operator Mono Book Italic
#: bold_italic_font Operator Mono Medium Italic
font_size 12.0
#: Font size (in pts)
adjust_line_height 0
adjust_column_width 0
#: Change the size of each character cell kitty renders. You can use
#: either numbers, which are interpreted as pixels or percentages
#: (number followed by %), which are interpreted as percentages of the
#: unmodified values. You can use negative pixels or percentages less
#: than 100% to reduce sizes (but this might cause rendering
#: artifacts).
# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
#: Map the specified unicode codepoints to a particular font. Useful
#: if you need special rendering for some symbols, such as for
#: Powerline. Avoids the need for patched fonts. Each unicode code
#: point is specified in the form U+<code point in hexadecimal>. You
#: can specify multiple code points, separated by commas and ranges
#: separated by hyphens. symbol_map itself can be specified multiple
#: times. Syntax is::
#: symbol_map codepoints Font Family Name
box_drawing_scale 0.001, 1, 1.5, 2
#: Change the sizes of the lines used for the box drawing unicode
#: characters These values are in pts. They will be scaled by the
#: monitor DPI to arrive at a pixel value. There must be four values
#: corresponding to thin, normal, thick, and very thick lines.
#: }}}
#: Cursor customization {{{
cursor #cccccc
#: Default cursor color
cursor_text_color #111111
#: Choose the color of text under the cursor. If you want it rendered
#: with the background #151f2c
#: special keyword: background
cursor_shape block
#: The cursor shape can be one of (block, beam, underline)
cursor_blink_interval 0.0
cursor_stop_blinking_after 15.0
#: The interval (in seconds) at which to blink the cursor. Set to zero
#: to disable blinking. Note that numbers smaller than repaint_delay
#: will be limited to repaint_delay. Stop blinking cursor after the
#: specified number of seconds of keyboard inactivity. Set to zero to
#: never stop blinking.
#: }}}
#: Scrollback {{{
scrollback_lines 2000
#: Number of lines of history to keep in memory for scrolling back.
#: Memory is allocated on demand. Negative numbers are (effectively)
#: infinite scrollback. Note that using very large scrollback is not
#: recommended a it can slow down resizing of the terminal and also
#: use large amounts of RAM.
scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
#: Program with which to view scrollback in a new window. The
#: scrollback buffer is passed as STDIN to this program. If you change
#: it, make sure the program you use can handle ANSI escape sequences
#: for colors and text formatting. INPUT_LINE_NUMBER in the command
#: line above will be replaced by an integer representing which line
#: should be at the top of the screen.
wheel_scroll_multiplier 5.0
#: Modify the amount scrolled by the mouse wheel. Note this is only
#: used for low precision scrolling devices, not for high precision
#: scrolling on platforms such as macOS and Wayland. Use negative
#: numbers to change scroll direction.
#: }}}
#: Mouse {{{
url_color #0087BD
url_style curly
#: The color and style for highlighting URLs on mouse-over. url_style
#: can be one of: none, single, double, curly
open_url_modifiers kitty_mod
#: The modifier keys to press when clicking with the mouse on URLs to
#: open the URL
open_url_with default
#: The program with which to open URLs that are clicked on. The
#: special value default means to use the operating system's default
#: URL handler.
copy_on_select yes
#: Copy to clipboard on select. With this enabled, simply selecting
#: text with the mouse will cause the text to be copied to clipboard.
#: Useful on platforms such as macOS/Wayland that do not have the
#: concept of primary selections. Note that this is a security risk,
#: as all programs, including websites open in your browser can read
#: the contents of the clipboard.
rectangle_select_modifiers ctrl+alt
#: The modifiers to use rectangular selection (i.e. to select text in
#: a rectangular block with the mouse)
select_by_word_characters :@-./_~?&=%+#
#: Characters considered part of a word when double clicking. In
#: addition to these characters any character that is marked as an
#: alpha-numeric character in the unicode database will be matched.
click_interval 0.5
#: The interval between successive clicks to detect double/triple
#: clicks (in seconds)
mouse_hide_wait 3.0
#: Hide mouse cursor after the specified number of seconds of the
#: mouse not being used. Set to zero to disable mouse cursor hiding.
focus_follows_mouse no
#: Set the active window to the window under the mouse when moving the
#: mouse around
#: }}}
#: Performance tuning {{{
repaint_delay 10
#: Delay (in milliseconds) between screen updates. Decreasing it,
#: increases frames-per-second (FPS) at the cost of more CPU usage.
#: The default value yields ~100 FPS which is more than sufficient for
#: most uses. Note that to actually achieve 100 FPS you have to either
#: set sync_to_monitor to no or use a monitor with a high refresh
#: rate.
input_delay 3
#: Delay (in milliseconds) before input from the program running in
#: the terminal is processed. Note that decreasing it will increase
#: responsiveness, but also increase CPU usage and might cause flicker
#: in full screen programs that redraw the entire screen on each loop,
#: because kitty is so fast that partial screen updates will be drawn.
sync_to_monitor yes
#: Sync screen updates to the refresh rate of the monitor. This
#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
#: when scrolling. However, it limits the rendering speed to the
#: refresh rate of your monitor. With a very high speed mouse/high
#: keyboard repeat rate, you may notice some slight input latency. If
#: so, set this to no.
#: }}}
#: Terminal bell {{{
enable_audio_bell no
#: Enable/disable the audio bell. Useful in environments that require
#: silence.
visual_bell_duration 0.0
#: Visual bell duration. Flash the screen when a bell occurs for the
#: specified number of seconds. Set to zero to disable.
window_alert_on_bell no
#: Request window attention on bell. Makes the dock icon bounce on
#: macOS or the taskbar flash on linux.
bell_on_tab no
#: Show a bell symbol on the tab if a bell occurs in one of the
#: windows in the tab and the window is not the currently focused
#: window
#: }}}
#: Window layout {{{
remember_window_size no
initial_window_width 1500
initial_window_height 850
#: If enabled, the window size will be remembered so that new
#: instances of kitty will have the same size as the previous
#: instance. If disabled, the window will initially have size
#: configured by initial_window_width/height, in pixels. You can use a
#: suffix of "c" on the width/height values to have them interpreted
#: as number of cells instead of pixels.
enabled_layouts *
#: The enabled window layouts. A comma separated list of layout names.
#: The special value all means all layouts. The first listed layout
#: will be used as the startup layout. For a list of available
#: layouts, see the
#: https://sw.kovidgoyal.net/kitty/index.html#layouts.
window_resize_step_cells 2
window_resize_step_lines 2
#: The step size (in units of cell width/cell height) to use when
#: resizing windows. The cells value is used for horizontal resizing
#: and the lines value for vertical resizing.
window_border_width 0.5
#: The width (in pts) of window borders. Will be rounded to the
#: nearest number of pixels based on screen resolution. Note that
#: borders are displayed only when more than one window is visible.
#: They are meant to separate multiple windows.
draw_minimal_borders yes
#: Draw only the minimum borders needed. This means that only the
#: minimum needed borders for inactive windows are drawn. That is only
#: the borders that separate the inactive window from a neighbor. Note
#: that setting a non-zero window margin overrides this and causes all
#: borders to be drawn.
window_margin_width 0.0
#: The window margin (in pts) (blank area outside the border)
single_window_margin_width -1000.0
#: The window margin (in pts) to use when only a single window is
#: visible. Negative values will cause the value of
#: window_margin_width to be used instead.
# window_padding_width 15.0
#: The window padding (in pts) (blank area between the text and the
#: window border)
active_border_color #dad3cc
#: The color for the border of the active window
inactive_border_color #dad3cc
#: The color for the border of inactive windows
bell_border_color #ff5a00
#: The color for the border of inactive windows in which a bell has
#: occurred
inactive_text_alpha 1.0
#: Fade the text in inactive windows by the specified amount (a number
#: between zero and one, with zero being fully faded).
#: }}}
#: Tab bar {{{
tab_bar_edge bottom
#: Which edge to show the tab bar on, top or bottom
tab_bar_margin_width 0.0
#: The margin to the left and right of the tab bar (in pts)
tab_bar_style separator
#: The tab bar style, can be one of: fade or separator. In the fade
#: style, each tab's edges fade into the background #151f2c
#: separator style, tabs are separated by a configurable separator.
tab_fade 0.25 0.5 0.75 1
#: Control how each tab fades into the background #151f2c
#: the tab_bar_style. Each number is an alpha (between zero and one)
#: that controls how much the corresponding cell fades into the
#: background, with zero being no fade and one being full fade. You
#: can change the number of cells used by adding/removing entries to
#: this list.
# tab_separator " ┇"
tab_separator " :"
#: The separator between tabs in the tab bar when using separator as
#: the tab_bar_style.
active_tab_foreground #151f2c
active_tab_background #dad3cc
active_tab_font_style bold-italic
inactive_tab_foreground #dad3cc
inactive_tab_background #151f2c
inactive_tab_font_style normal
#: Tab bar colors and styles
#: }}}
#: Color scheme {{{
foreground #dad3cc
background #151f2c
#: The foreground #dad3cc
background_opacity 1.0
dynamic_background_opacity no
#: The opacity of the background. A number between 0 and 1, where 1 is
#: opaque and 0 is fully transparent. This will only work if
#: supported by the OS (for instance, when using a compositor under
#: X11). Note that it only sets the default background #151f2c
#: opacity. This is so that things like the status bar in vim,
#: powerline prompts, etc. still look good. But it means that if you
#: use a color theme with a background #151f2c
#: not be rendered as transparent. Instead you should change the
#: default background #151f2c
#: background #151f2c
#: codes to set the terminals default colors in a shell script to
#: launch your editor. Be aware that using a value less than 1.0 is a
#: (possibly significant) performance hit. If you want to dynamically
#: change transparency of windows set dynamic_background_opacity to
#: yes (this is off by default as it has a performance cost)
dim_opacity 0.75
#: How much to dim text that has the DIM/FAINT attribute set. One
#: means no dimming and zero means fully dimmed (i.e. invisible).
selection_foreground #dad3cc
selection_background #151f2c
#: The foreground #dad3cc
#: The 16 terminal colors. There are 8 basic colors, each color has a
#: dull and bright version. You can also set the remaining colors from
#: the 256 color table as color16 to color255.
color0 #151f2c
color8 #98938e
#: black
color1 #3E8298
color9 #3E8298
#: red
color2 #4B899B
color10 #4B899B
#: green
color3 #5A99A2
color11 #5A99A2
#: yellow
color4 #6FA9AA
color12 #6FA9AA
#: blue
color5 #98A9A2
color13 #98A9A2
#: magenta
color6 #ADB8B4
color14 #ADB8B4
#: cyan
color7 #dad3cc
color15 #dad3cc
#: white
#: }}}
#: Advanced {{{
shell .
#: The shell program to execute. The default value of . means to use
#: whatever shell is set as the default shell for the current user.
#: Note that on macOS if you change this, you might need to add
#: --login to ensure that the shell starts in interactive mode and
#: reads its startup rc files.
editor code-insiders
#: The console editor to use when editing the kitty config file or
#: similar tasks. A value of . means to use the environment variable
#: EDITOR. Note that this environment variable has to be set not just
#: in your shell startup scripts but system-wide, otherwise kitty will
#: not see it.
close_on_child_death no
#: Close the window when the child process (shell) exits. If no (the
#: default), the terminal will remain open when the child exits as
#: long as there are still processes outputting to the terminal (for
#: example disowned or backgrounded processes). If yes, the window
#: will close as soon as the child process exits. Note that setting it
#: to yes means that any background #151f2c
#: can fail silently because their stdout/stderr/stdin no longer work.
allow_remote_control no
#: Allow other programs to control kitty. If you turn this on other
#: programs can control all aspects of kitty, including sending text
#: to kitty windows, opening new windows, closing windows, reading the
#: content of windows, etc. Note that this even works over ssh
#: connections.
# env
#: Specify environment variables to set in all child processes. Note
#: that environment variables are expanded recursively, so if you
#: use::
#: env MYVAR1=a
#: env MYVAR2=${MYVAR}/${HOME}/b
#: The value of MYVAR2 will be a/<path to home directory>/b.
startup_session none
#: Path to a session file to use for all kitty instances. Can be
#: overridden by using the kitty --session command line option for
#: individual instances. See
#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
#: documentation for details. Note that relative paths are interpreted
#: with respect to the kitty config directory. Environment variables
#: in the path are expanded.
clipboard_control write-clipboard write-primary
#: Allow programs running in kitty to read and write from the
#: clipboard. You can control exactly which actions are allowed. The
#: set of possible actions is: write-clipboard read-clipboard write-
#: primary read-primary The default is to allow writing to the
#: clipboard and primary selection. Note that enabling the read
#: functionality is a security risk as it means that any program, even
#: one running on a remote server via SSH can read your clipboard.
# term xterm-kitty
term rxvt-unicode-256color
#: The value of the TERM environment variable to set. Changing this
#: can break many terminal programs, only change it if you know what
#: you are doing, not because you read some advice on Stack Overflow
#: to change it.
#: }}}
#: OS specific tweaks {{{
macos_titlebar_color system
#: Change the color of the kitty window's titlebar on macOS. A value
#: of system means to use the default system color, a value of
#: background #151f2c
#: active window and finally you can use an arbitrary color, such as
#: #12af59 or red. WARNING: This option works by using a hack, as
#: there is no proper Cocoa API for it. It sets the background #151f2c
#: of the entire window and makes the titlebar transparent. As such it
#: is incompatible with background_opacity. If you want to use both,
#: you are probably better off just hiding the titlebar with
#: macos_hide_titlebar.
macos_hide_titlebar no
#: Hide the kitty window's title bar on macOS.
x11_hide_window_decorations no
#: Hide the window decorations (title bar and window borders) on X11
#: and Wayland. Whether this works and exactly what effect it has
#: depends on the window manager, as it is the job of the window
#: manager/compositor to draw window decorations.
macos_option_as_alt yes
#: Use the option key as an alt key. With this set to no, kitty will
#: use the macOS native Option+Key = unicode character behavior. This
#: will break any Alt+key keyboard shortcuts in your terminal
#: programs, but you can use the macOS unicode input technique.
macos_hide_from_tasks no
#: Hide the kitty window from running tasks (Option+Tab) on macOS.
macos_quit_when_last_window_closed no
#: Have kitty quit when all the top-level windows are closed. By
#: default, kitty will stay running, even with no open windows, as is
#: the expected behavior on macOS.
macos_window_resizable yes
#: Disable this if you want kitty top-level (OS) windows to not be
#: resizable on macOS.
macos_thicken_font 0
#: Draw an extra border around the font with the given width, to
#: increase legibility at small font sizes. For example, a value of
#: 0.75 will result in rendering that looks similar to sub-pixel
#: antialiasing at common font sizes.
macos_traditional_fullscreen no
#: Use the traditional full-screen transition, that is faster, but
#: less pretty.
macos_custom_beam_cursor no
#: Enable/disable custom mouse cursor for macOS that is easier to see
#: on both light and dark backgrounds. WARNING: this might make your
#: mouse cursor invisible on dual GPU machines.
#: }}}
#: Keyboard shortcuts {{{
#: For a list of key names, see: GLFW keys
#: <http://www.glfw.org/docs/latest/group__keys.html>. The name to use
#: is the part after the GLFW_KEY_ prefix. For a list of modifier
#: names, see: GLFW mods
#: <http://www.glfw.org/docs/latest/group__mods.html>
#: On Linux you can also use XKB key names to bind keys that are not
#: supported by GLFW. See XKB keys
#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
#: keysyms.h> for a list of key names. The name to use is the part
#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
#: name for keys that are not present in the list of GLFW keys.
#: Finally, you can use raw system key codes to map keys. To see the
#: system key code for a key, start kitty with the kitty --debug-
#: keyboard option. Then kitty will output some debug text for every
#: key event. In that text look for ``native_code`` the value of that
#: becomes the key name in the shortcut. For example:
#: .. code-block:: none
#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
#: Here, the key name for the A key is 0x61 and you can use it with::
#: map ctrl+0x61 something
#: to map ctrl+a to something.
#: You can use the special action no_op to unmap a keyboard shortcut
#: that is assigned in the default configuration.
#: You can combine multiple actions to be triggered by a single
#: shortcut, using the syntax below::
#: map key combine <separator> action1 <separator> action2 <separator> action3 ...
#: For example::
#: map kitty_mod+e combine : new_window : next_layout
#: this will create a new window and switch to the next available
#: layout
#: You can use multi-key shortcuts using the syntax shown below::
#: map key1>key2>key3 action
#: For example::
#: map ctrl+f>2 set_font_size 20
kitty_mod ctrl+shift
#: The value of kitty_mod is used as the modifier for all default
#: shortcuts, you can change it in your kitty.conf to change the
#: modifiers for all the default shortcuts.
clear_all_shortcuts no
#: You can have kitty remove all shortcut definition seen up to this
#: point. Useful, for instance, to remove the default shortcuts.
#: Clipboard {{{
map kitty_mod+c copy_to_clipboard
map kitty_mod+v paste_from_clipboard
map kitty_mod+s paste_from_selection
map shift+insert paste_from_selection
map kitty_mod+o pass_selection_to_program
#: You can also pass the contents of the current selection to any
#: program using pass_selection_to_program. By default, the system's
#: open program is used, but you can specify your own, for example::
#: map kitty_mod+o pass_selection_to_program firefox
#: You can pass the current selection to a terminal program running in
#: a new kitty window, by using the @selection placeholder::
#: map kitty_mod+y new_window less @selection
#: }}}
#: Scrolling {{{
#map kitty_mod+up scroll_line_up
map kitty_mod+k scroll_line_up
# map kitty_mod+down scroll_line_down
map kitty_mod+j scroll_line_down
map kitty_mod+page_up scroll_page_up
map kitty_mod+page_down scroll_page_down
map kitty_mod+home scroll_home
map kitty_mod+end scroll_end
map kitty_mod+h show_scrollback
#: You can pipe the contents of the current screen + history buffer as
#: STDIN to an arbitrary program using the ``pipe`` function. For
#: example, the following opens the scrollback buffer in less in an
#: overlay window::
#: map f1 pipe @ansi overlay less +G -R
#: Placeholders available are: @text (which is plain text) and @ansi
#: (which includes text styling escape codes). For only the current
#: screen, use @screen or @ansi_screen. For the secondary screen, use
#: @alternate and @ansi_alternate. The secondary screen is the screen
#: not currently displayed. For example if you run a fullscreen
#: terminal application, the secondary screen will be the screen you
#: return to when quitting the application. You can also use ``none``
#: for no STDIN input.
#: To open in a new window, tab or new OS window, use ``window``,
#: ``tab``, or ``os_window`` respectively. You can also use ``none``
#: in which case the data will be piped into the program without
#: creating any windows, useful if the program is a GUI program that
#: creates its own windows.
#: }}}
#: Window management {{{
map kitty_mod+enter new_window
#: You can open a new window running an arbitrary program, for
#: example::
#: map kitty_mod+y new_window mutt
#: You can open a new window with the current working directory set to
#: the working directory of the current window using::
#: map ctrl+alt+enter new_window_with_cwd
#: You can open a new window that is allowed to control kitty via the
#: kitty remote control facility by prefixing the command line with @.
#: Any programs running in that window will be allowed to control
#: kitty. For example::
#: map ctrl+enter new_window @ some_program
map kitty_mod+n new_os_window
map kitty_mod+w close_window
map kitty_mod+up next_window
map kitty_mod+down previous_window
map kitty_mod+f move_window_forward
map kitty_mod+b move_window_backward
map kitty_mod+` move_window_to_top
map kitty_mod+r start_resizing_window
map kitty_mod+1 first_window
map kitty_mod+2 second_window
map kitty_mod+3 third_window
map kitty_mod+4 fourth_window
map kitty_mod+5 fifth_window
map kitty_mod+6 sixth_window
map kitty_mod+7 seventh_window
map kitty_mod+8 eighth_window
map kitty_mod+9 ninth_window
map kitty_mod+0 tenth_window
#: }}}
#: Tab management {{{
map kitty_mod+right next_tab
map kitty_mod+left previous_tab
map kitty_mod+t new_tab
map kitty_mod+q close_tab
map kitty_mod+. move_tab_forward
map kitty_mod+, move_tab_backward
map kitty_mod+alt+t set_tab_title
#: You can also create shortcuts to go to specific tabs, with 1 being
#: the first tab::
#: map ctrl+alt+1 goto_tab 1
#: map ctrl+alt+2 goto_tab 2
#: Just as with new_window above, you can also pass the name of
#: arbitrary commands to run when using new_tab and use
#: new_tab_with_cwd. Finally, if you want the new tab to open next to
#: the current tab rather than at the end of the tabs list, use::
#: map ctrl+t new_tab !neighbor [optional cmd to run]
#: }}}
#: Layout management {{{
map kitty_mod+l next_layout
#: You can also create shortcuts to switch to specific layouts::
#: map ctrl+alt+t goto_layout tall
#: map ctrl+alt+s goto_layout stack
#: Similarly, to switch back to the previous layout::
#: map ctrl+alt+p last_used_layout
#: }}}
#: Font sizes {{{
#: You can change the font size for all top-level kitty windows at a
#: time or only the current one.
map kitty_mod+equal change_font_size all +2.0
map kitty_mod+minus change_font_size all -2.0
map kitty_mod+backspace change_font_size all 0
#: To setup shortcuts for specific font sizes::
#: map kitty_mod+f6 change_font_size all 10.0
#: To setup shortcuts to change only the current window's font size::
#: map kitty_mod+f6 change_font_size current 10.0
#: }}}
#: Select and act on visible text {{{
#: Use the hints kitten to select text and either pass it to an
#: external program or insert it into the terminal or copy it to the
#: clipboard.
map kitty_mod+e kitten hints
#: Open a currently visible URL using the keyboard. The program used
#: to open the URL is specified in open_url_with.
map kitty_mod+p>f kitten hints --type path --program -
#: Select a path/filename and insert it into the terminal. Useful, for
#: instance to run git commands on a filename output from a previous
#: git command.
map kitty_mod+p>shift+f kitten hints --type path
#: Select a path/filename and open it with the default open program.
map kitty_mod+p>l kitten hints --type line --program -
#: Select a line of text and insert it into the terminal. Use for the
#: output of things like: ls -1
map kitty_mod+p>w kitten hints --type word --program -
#: Select words and insert into terminal.
map kitty_mod+p>h kitten hints --type hash --program -
#: Select something that looks like a hash and insert it into the
#: terminal. Useful with git, which uses sha1 hashes to identify
#: commits
#: The hints kitten has many more modes of operation that you can map
#: to different shortcuts. For a full description see kittens/hints.
#: }}}
#: Miscellaneous {{{
map kitty_mod+f11 toggle_fullscreen
map kitty_mod+u kitten unicode_input
map kitty_mod+f2 edit_config_file
map kitty_mod+escape kitty_shell window
#: Open the kitty shell in a new window/tab/overlay/os_window to
#: control kitty using commands.
map kitty_mod+a>m set_background_opacity +0.1
map kitty_mod+a>l set_background_opacity -0.1
map kitty_mod+a>1 set_background_opacity 1
map kitty_mod+a>d set_background_opacity default
map kitty_mod+delete clear_terminal reset active
#: You can create shortcuts to clear/reset the terminal. For example::
#: map kitty_mod+f9 clear_terminal reset active
#: map kitty_mod+f10 clear_terminal clear active
#: map kitty_mod+f11 clear_terminal scrollback active
#: These will reset screen/clear screen/clear screen+scrollback
#: respectively. If you want to operate on all windows instead of just
#: the current one, use all instead of :italic`active`.
#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
#: client program when pressing specified shortcut keys. For example::
#: map ctrl+alt+a send_text all Special text
#: This will send "Special text" when you press the ctrl+alt+a key
#: combination. The text to be sent is a python string literal so you
#: can use escapes like \x1b to send control codes or \u21fb to send
#: unicode characters (or you can just input the unicode characters
#: directly as UTF-8 text). The first argument to send_text is the
#: keyboard modes in which to activate the shortcut. The possible
#: values are normal or application or kitty or a comma separated
#: combination of them. The special keyword all means all modes. The
#: modes normal and application refer to the DECCKM cursor key mode
#: for terminals, and kitty refers to the special kitty extended
#: keyboard protocol.
#: Another example, that outputs a word and then moves the cursor to
#: the start of the line (same as pressing the Home key)::
#: map ctrl+alt+a send_text normal Word\x1b[H
#: map ctrl+alt+a send_text application Word\x1bOH
#: }}}
# }}}I dont see how you could possibly get the same behavior regardless of the setting. You probably are using a different kitty.conf than the one kitty is sourcing. Use kitty --debug-config to check
shizonic
commented
5 years ago Thanks again for all you effort. :+1: I don't know too but how you can see it in fact like that. Here is the output of kitty --debug-config:
kitty 0.12.2 created by Kovid Goyal
Linux xps 4.18.10_1 #1 SMP PREEMPT Wed Sep 26 21:35:27 UTC 2018 x86_64
Running under: X11
Void \r (\n) (\l)
Loaded config files: /home/tm/.config/kitty/kitty.conf
Config options different from defaults:
active_border_color Color(red=218, green=211, blue=204)
active_tab_background Color(red=218, green=211, blue=204)
active_tab_foreground Color(red=21, green=31, blue=44)
background Color(red=21, green=31, blue=44)
bell_on_tab False
color0 Color(red=21, green=31, blue=44)
color1 Color(red=62, green=130, blue=152)
color10 Color(red=75, green=137, blue=155)
color11 Color(red=90, green=153, blue=162)
color12 Color(red=111, green=169, blue=170)
color13 Color(red=152, green=169, blue=162)
color14 Color(red=173, green=184, blue=180)
color15 Color(red=218, green=211, blue=204)
color2 Color(red=75, green=137, blue=155)
color3 Color(red=90, green=153, blue=162)
color4 Color(red=111, green=169, blue=170)
color5 Color(red=152, green=169, blue=162)
color6 Color(red=173, green=184, blue=180)
color7 Color(red=218, green=211, blue=204)
color8 Color(red=152, green=147, blue=142)
color9 Color(red=62, green=130, blue=152)
copy_on_select True
cursor_blink_interval 0
editor code-insiders
enable_audio_bell False
font_family Operator Mono Lig Medium
font_size 12.0
foreground Color(red=218, green=211, blue=204)
inactive_border_color Color(red=218, green=211, blue=204)
inactive_tab_background Color(red=21, green=31, blue=44)
inactive_tab_foreground Color(red=218, green=211, blue=204)
initial_window_height (850, 'px')
initial_window_width (1500, 'px')
remember_window_size False
selection_background Color(red=21, green=31, blue=44)
selection_foreground Color(red=218, green=211, blue=204)
tab_bar_style separator
tab_separator :
term rxvt-unicode-256color
window_alert_on_bell False
window_border_width 0.5
Changed shortcuts:
shift+control+down KeyAction(func='previous_window', args=())
shift+control+up KeyAction(func='next_window', args=())Dont see anything wrong with that config at first glance. Does the issue also show up if you run kitty as
kitty --config NONE
ggsalas
commented
4 years ago I see the same issue with kitty on macos. I have started with kitty --config NONE and I see this:
kovidgoyal
commented
4 years ago There is no padding or margin in that screenshot, other than what is needed because the window size is not a multiple of th ecell size.
ggsalas
commented
4 years ago I have tried kitty with an initial window size fixed in cells and with no borders, padding and margins and works perfect:
If I add a border and a padding you can see an extra "bottom margin" probably caused by the padding and borders of the right column windows. And and extra "right margin" caused because the window size is not a multiple of the cell size:
I have tried to fix this removing the border and adding a padding half size of the font height, but not works:
If I'm not wrong, this could be fixed with a padding added as multiple of the "cell" size (e.g. 0.5c) and add a border width included on the cell size (not add an extra width for the border). This is possible to do?
kovidgoyal
commented
4 years ago font size is in points and anyway does not exactly correspond to cell size. I dont really see the point of what you are asking. When you have multiple windows, with arbitrary layouts there can be arbitrary numbers of borders and padding, so one number for them is never going to work anyway.
ggsalas
commented
4 years ago @kovidgoyal I think you're right, I have tested how works on other app and have the same problem:
The point is only UI and is probably a personal taste. IMO the lines that divide the windows on this screenshot are more clear to see that the border line windows I can get on kitty. Even with draw_minimal_borders sometimes I see double line to divide windows:
Also, I think this are related I think https://github.com/kovidgoyal/kitty/issues/1994 https://github.com/kovidgoyal/kitty/issues/1337 https://github.com/kovidgoyal/kitty/issues/699
kovidgoyal
commented
4 years ago minimal borders only work if you set margins to zero.
ggsalas
commented
4 years ago The last screenshot I send is a grid layout with window_margin_width 0.
kovidgoyal
commented
4 years ago yes grid layout shows border active window, in addition to the actual grid, if you dont like that, turn it off in preferences.
jgsn13
commented
3 years ago Thanks again for all you effort. I don't know too but how you can see it in fact like that. Here is the output of
kitty --debug-config:kitty 0.12.2 created by Kovid Goyal Linux xps 4.18.10_1 #1 SMP PREEMPT Wed Sep 26 21:35:27 UTC 2018 x86_64 Running under: X11 Void \r (\n) (\l) Loaded config files: /home/tm/.config/kitty/kitty.conf Config options different from defaults: active_border_color Color(red=218, green=211, blue=204) active_tab_background Color(red=218, green=211, blue=204) active_tab_foreground Color(red=21, green=31, blue=44) background Color(red=21, green=31, blue=44) bell_on_tab False color0 Color(red=21, green=31, blue=44) color1 Color(red=62, green=130, blue=152) color10 Color(red=75, green=137, blue=155) color11 Color(red=90, green=153, blue=162) color12 Color(red=111, green=169, blue=170) color13 Color(red=152, green=169, blue=162) color14 Color(red=173, green=184, blue=180) color15 Color(red=218, green=211, blue=204) color2 Color(red=75, green=137, blue=155) color3 Color(red=90, green=153, blue=162) color4 Color(red=111, green=169, blue=170) color5 Color(red=152, green=169, blue=162) color6 Color(red=173, green=184, blue=180) color7 Color(red=218, green=211, blue=204) color8 Color(red=152, green=147, blue=142) color9 Color(red=62, green=130, blue=152) copy_on_select True cursor_blink_interval 0 editor code-insiders enable_audio_bell False font_family Operator Mono Lig Medium font_size 12.0 foreground Color(red=218, green=211, blue=204) inactive_border_color Color(red=218, green=211, blue=204) inactive_tab_background Color(red=21, green=31, blue=44) inactive_tab_foreground Color(red=218, green=211, blue=204) initial_window_height (850, 'px') initial_window_width (1500, 'px') remember_window_size False selection_background Color(red=21, green=31, blue=44) selection_foreground Color(red=218, green=211, blue=204) tab_bar_style separator tab_separator : term rxvt-unicode-256color window_alert_on_bell False window_border_width 0.5 Changed shortcuts: shift+control+down KeyAction(func='previous_window', args=()) shift+control+up KeyAction(func='next_window', args=())@kovidgoyal I think you're right, I have tested how works on other app and have the same problem:
The point is only UI and is probably a personal taste. IMO the lines that divide the windows on this screenshot are more clear to see that the border line windows I can get on kitty. Even with
draw_minimal_borderssometimes I see double line to divide windows:Also, I think this are related I think #1994 #1337 #699
I had the same problem, but only in the top and bottom borders, and I solved it adjusting "adjust_line_height" and "adjust_column_width".
I would like to use a small border to see multiple windows correctly. But I don't want any margin around the borders. As far as I see there is currently no way to archieve this or did I miss something?