search

koying / SPMC

fork of xbmc/kodi
Other
633 stars 257 forks source link

X96MINI Amlogic S905w YouTube stream only 720p #1090

Open Murtuza321 opened 7 years ago

Murtuza321 commented 7 years ago

Hello i am new to GitHub is there any way to stream 1080p videos on x96mini?

I will be waiting for your responses

Thanks

lebigboss commented 7 years ago

I have the same box than you and I can't put kodi more than 720p and when I do a test with antutu 3D it's 720p test

I think, it's not 4k box

Murtuza321 commented 7 years ago

It is 4k but you can run 4k content using usb only but for online streaming it support only 720p

janolapin2016 commented 7 years ago

bouuhhh

krists147 commented 7 years ago

Hey, is there any way to watch 1080p YouTube? Custom ROM or something like that? I bought it only for YouTube and I'm reading that it can do only 720p. I'm so disappointed.

Murtuza321 commented 6 years ago

I have found a way to watch even 4k resolution download latest YouTube tv aap from APK mirror and when it's ask for allow microphone deny that otherwise app will crash it can adjust the video quality depend on your internet speed but it says view port is 720p but the resolution will be 4k hope it helps others :)

krists147 commented 6 years ago

Hey, thanks. Yes, I figured out it yesterday by myself. Latest version is stuttering for me. A lot of dropped frames. But not latest it works good. But thanks for helping. I'll try make a post in forums, to help other.

Krists.

  1. gada 6. dec. 11:04 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

I have found a way to watch even 4k resolution download latest YouTube tv aap from APK mirror and when it's ask for allow microphone deny that otherwise app will crash it can adjust the video quality depend on your internet speed but it says view port is 720p but the resolution will be 4k hope it helps others :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349577115, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUhVxK-cYGK4LeUvz3uHYoyjjy_F5ks5s9liBgaJpZM4QT0JV .

krists147 commented 6 years ago

Hey. I figured out how to watch full hd on YouTube app, no YouTube TV. I can watch all 1080p ,all streams. If you are interested , I can explain you step by step.

  1. gada 6. dec. 12:01 pēcpusdienā, "Krists Logins" krlogins96@gmail.com rakstīja:

Hey, thanks. Yes, I figured out it yesterday by myself. Latest version is stuttering for me. A lot of dropped frames. But not latest it works good. But thanks for helping. I'll try make a post in forums, to help other.

Krists.

  1. gada 6. dec. 11:04 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

I have found a way to watch even 4k resolution download latest YouTube tv aap from APK mirror and when it's ask for allow microphone deny that otherwise app will crash it can adjust the video quality depend on your internet speed but it says view port is 720p but the resolution will be 4k hope it helps others :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349577115, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUhVxK-cYGK4LeUvz3uHYoyjjy_F5ks5s9liBgaJpZM4QT0JV .

krists147 commented 6 years ago

Hey, if anyone want 1080p streaming and everything, I can explain how to do it. Not only YouTube but Netflix , etc.

Murtuza321 commented 6 years ago

Please explain

krists147 commented 6 years ago

It's simple. Please download the tools，firmware and follow the video to upgrade the software.

Video : https://youtu.be/i5MXBdv5YD0

1.tools https://www.dropbox.com/s/5fjprupjxqbfzm7/USB_Burning_Tool_v2.0.9.rar?dl=0 2.Firmware http://www.tanix-box.com/download-view/tanix-tx3-mini-firmware-full-image-20170829/ 3.Guide upgrade https://www.dropbox.com/s/7emjyahdvgybgyl/Memohi%20OS%E7%83%A7%E5%BD%95%E8%AF%B4%E6%98%8E.docx?dl=0

You need get tanix mini firmware. It's seems hard to do but it is simple. If you don't have usb to usb cable you can make one. Don't be scared it is easy , and if you don't like tanix firmware you can install back x96 mini firmware

  1. gada 7. dec. 10:10 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Please explain

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349893513, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUujN-xNWF9gInFrfpGdT7E6uNbFGks5s952NgaJpZM4QT0JV .

Murtuza321 commented 6 years ago

Is remote working? And is it stable any bugs?

On Dec 7, 2017 1:15 PM, "krists147" notifications@github.com wrote:

It's simple. Please download the tools，firmware and follow the video to upgrade the software.

Video : https://youtu.be/i5MXBdv5YD0

1.tools https://www.dropbox.com/s/5fjprupjxqbfzm7/USB_Burning_Tool_v2.0.9.rar?dl=0 2.Firmware http://www.tanix-box.com/download-view/tanix-tx3-mini- firmware-full-image-20170829/ 3.Guide upgrade https://www.dropbox.com/s/7emjyahdvgybgyl/Memohi%20OS% E7%83%A7%E5%BD%95%E8%AF%B4%E6%98%8E.docx?dl=0

You need get tanix mini firmware. It's seems hard to do but it is simple. If you don't have usb to usb cable you can make one. Don't be scared it is easy , and if you don't like tanix firmware you can install back x96 mini firmware

  1. gada 7. dec. 10:10 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Please explain

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349893513, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUujN- xNWF9gInFrfpGdT7E6uNbFGks5s952NgaJpZM4QT0JV .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349894560, or mute the thread https://github.com/notifications/unsubscribe-auth/Af4lQFEC_wtXPSNaVZ5nezIUJ7m4lj0pks5s9565gaJpZM4QT0JV .

krists147 commented 6 years ago

Yes, it's stable. Remote is working.

  1. gada 7. dec. 10:19 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Is remote working? And is it stable any bugs?

On Dec 7, 2017 1:15 PM, "krists147" notifications@github.com wrote:

It's simple. Please download the tools，firmware and follow the video to upgrade the software.

Video : https://youtu.be/i5MXBdv5YD0

1.tools https://www.dropbox.com/s/5fjprupjxqbfzm7/USB_Burning_ Tool_v2.0.9.rar?dl=0 2.Firmware http://www.tanix-box.com/download-view/tanix-tx3-mini- firmware-full-image-20170829/ 3.Guide upgrade https://www.dropbox.com/s/7emjyahdvgybgyl/Memohi%20OS% E7%83%A7%E5%BD%95%E8%AF%B4%E6%98%8E.docx?dl=0

You need get tanix mini firmware. It's seems hard to do but it is simple. If you don't have usb to usb cable you can make one. Don't be scared it is easy , and if you don't like tanix firmware you can install back x96 mini firmware

  1. gada 7. dec. 10:10 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Please explain

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349893513, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUujN- xNWF9gInFrfpGdT7E6uNbFGks5s952NgaJpZM4QT0JV .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349894560, or mute the thread https://github.com/notifications/unsubscribe-auth/Af4lQFEC_ wtXPSNaVZ5nezIUJ7m4lj0pks5s9565gaJpZM4QT0JV .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349895339, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUrhHUZLB4h-4kyJ_P96SgX8wD_FVks5s95-ggaJpZM4QT0JV .

krists147 commented 6 years ago

Did you succeeded ,installing tanix firmware?

  1. gada 7. dec. 10:28 priekšpusdienā, "Krists Logins" < krlogins96@gmail.com> rakstīja:

Yes, it's stable. Remote is working.

  1. gada 7. dec. 10:19 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Is remote working? And is it stable any bugs?

On Dec 7, 2017 1:15 PM, "krists147" notifications@github.com wrote:

It's simple. Please download the tools，firmware and follow the video to upgrade the software.

Video : https://youtu.be/i5MXBdv5YD0

1.tools https://www.dropbox.com/s/5fjprupjxqbfzm7/USB_Burning_Tool_ v2.0.9.rar?dl=0 2.Firmware http://www.tanix-box.com/download-view/tanix-tx3-mini- firmware-full-image-20170829/ 3.Guide upgrade https://www.dropbox.com/s/7emjyahdvgybgyl/Memohi%20OS% E7%83%A7%E5%BD%95%E8%AF%B4%E6%98%8E.docx?dl=0

You need get tanix mini firmware. It's seems hard to do but it is simple. If you don't have usb to usb cable you can make one. Don't be scared it is easy , and if you don't like tanix firmware you can install back x96 mini firmware

  1. gada 7. dec. 10:10 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Please explain

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349893513, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUujN- xNWF9gInFrfpGdT7E6uNbFGks5s952NgaJpZM4QT0JV .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349894560, or mute the thread https://github.com/notifications/unsubscribe-auth/Af4lQFEC_ wtXPSNaVZ5nezIUJ7m4lj0pks5s9565gaJpZM4QT0JV .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349895339, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUrhHUZLB4h-4kyJ_P96SgX8wD_FVks5s95-ggaJpZM4QT0JV .

Murtuza321 commented 6 years ago

I didn't tried yet

On Dec 7, 2017 11:16 PM, "krists147" notifications@github.com wrote:

Did you succeeded ,installing tanix firmware?

  1. gada 7. dec. 10:28 priekšpusdienā, "Krists Logins" < krlogins96@gmail.com> rakstīja:

Yes, it's stable. Remote is working.

  1. gada 7. dec. 10:19 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Is remote working? And is it stable any bugs?

On Dec 7, 2017 1:15 PM, "krists147" notifications@github.com wrote:

It's simple. Please download the tools，firmware and follow the video to upgrade the software.

Video : https://youtu.be/i5MXBdv5YD0

1.tools https://www.dropbox.com/s/5fjprupjxqbfzm7/USB_Burning_Tool_ v2.0.9.rar?dl=0 2.Firmware http://www.tanix-box.com/download-view/tanix-tx3-mini- firmware-full-image-20170829/ 3.Guide upgrade https://www.dropbox.com/s/7emjyahdvgybgyl/Memohi%20OS% E7%83%A7%E5%BD%95%E8%AF%B4%E6%98%8E.docx?dl=0

You need get tanix mini firmware. It's seems hard to do but it is simple. If you don't have usb to usb cable you can make one. Don't be scared it is easy , and if you don't like tanix firmware you can install back x96 mini firmware

  1. gada 7. dec. 10:10 priekšpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Please explain

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/koying/SPMC/issues/1090#issuecomment-349893513 , or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUujN- xNWF9gInFrfpGdT7E6uNbFGks5s952NgaJpZM4QT0JV .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349894560, or mute the thread https://github.com/notifications/unsubscribe-auth/Af4lQFEC_ wtXPSNaVZ5nezIUJ7m4lj0pks5s9565gaJpZM4QT0JV .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-349895339, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUrhHUZLB4h-4kyJ_ P96SgX8wD_FVks5s95-ggaJpZM4QT0JV .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-350050701, or mute the thread https://github.com/notifications/unsubscribe-auth/Af4lQBZANvg9Ib5IOKaRBZLTu2u932l8ks5s-CuTgaJpZM4QT0JV .

Nautretsim commented 6 years ago

Good job krtists147, x96 mini run well with tx3 mini firmware, youtube is 1080p

krists147 commented 6 years ago

Yep. Using its months, no crashes

  1. gada 15. marts 5:19 pēcpusdienā, "Nautretsim" < notifications@github.com> rakstīja:

Good job krtists147, x96 mini run well with tx3 mini firmware, youtube is 1080p

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-373413358, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUmZe2OK0uuPMmbjGo6FU5SELaAYAks5teoaIgaJpZM4QT0JV .

Murtuza321 commented 6 years ago

Now original firmware is also supporting 1080p

krists147 commented 6 years ago

Yes? Oh cool, probably will try

  1. gada 15. marts 5:51 pēcpusdienā, "Murtuza321" < notifications@github.com> rakstīja:

Now original firmware is also supporting 1080p

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/koying/SPMC/issues/1090#issuecomment-373425180, or mute the thread https://github.com/notifications/unsubscribe-auth/AgOYUvDXUh4BvucKwyuVrhhgS_kcCKk5ks5teo4FgaJpZM4QT0JV .

Nautretsim commented 6 years ago

Tx3 mini firmware is best for amlogic 905w :)). UI tanix is better than enybox