Auto adjust refresh rate not working.

koying / SPMC

fork of xbmc/kodi

Other

634 stars 257 forks source link

Auto adjust refresh rate not working. #912

Open egtrev opened 7 years ago

egtrev commented 7 years ago

I've gone back to my Nvidia Shield TV to try and get it working properly. I have a Pansonic 4k TV and Denon 4k receiver and SPMC 16.6 Everything is working including bitstreaming of Atmos audio except I just can't get the auto adjust refresh rate to work at all, it just stays at the default 60 hz. I have it set to start/stop and delay of 3 seconds (tried other settings too) but it never changes, is there anything I'm missing, do I need to look at a logfile? Thanks for any help, this is the only missing piece for me.

Nerto commented 7 years ago

Denon has some problems with adjust of the refresh rate. I have for a example 7 sec. You also can try to restart your nvidia shield. Sometimes the handshaking is broken.

Nerto

egtrev commented 7 years ago

Thanks for the response Nerto. I've tried adjusting the delay but still can't get it to change. Note: if I plug the Nvidia straight into the TV it still does not change the refresh rate, it stays at the default. Could it be an HDMI cable issue?

TinderboxUK commented 7 years ago

The Amlogic S905 ect have a problem with framerate not changing installing "AutoFrameFix.apk" with root and supersu fixes the problem, but i know you have an nvidia so unless it works on other brands.

The second is another fix ""script.video.fswitch-2.0.4.zip" i have not tried it.

John

Kodi.AmLogic.script.frequency.switcher-master.zip AutoFrameFix.zip

Nerto commented 7 years ago

Can u check the auto refresh rate with another programm? What are u Video settings?

Nerto

egtrev commented 7 years ago

What other program is best to test with? I have tried with Kodi v17, but same issue. Video settings in SPMC are - Refresh start/stop 3.5 sec delay. Sync playback to display off. Acceleration all on.

Nerto commented 7 years ago

Set delay for test to 6 or something and try to turn all Acceleration off ? Have u try an other device like a bluray player?

egtrev commented 7 years ago

I've tried various delay from 0-10 and turned the accelaration off, but still no change happens.

Yes, my other devices and players automatically change fine.

Nerto commented 7 years ago

Has the new update for the shield changes anything?

Caesar252 commented 6 years ago

HDMI 1.4 works fine. You need to go to SPMC System, Settings, Video, Playback, Adjust display refresh rate On start/stop. Set Pause during refresh rate change to 13.0 seconds or more depending on your receiver. Mine is the Onkyo 747 with HDCP input 3.