search

kp-bit / xblinds

HTTP and MQTT controller for vertical blinds
76 stars 15 forks source link

Xblinds gets disconnected and does not update MQTT status #28

Closed denniskoenders closed 2 years ago

denniskoenders commented 2 years ago

Hi, First of all, thank you for you project, I am loving it! But it seems that when the blind gets operated, the ESP gets disconnected after a short while with the MQTT message "xblinds-xxxxxx not connected". The complete blind open or close procedure finishes correctly, but at the end I get the MQTT messagage "rebooted". So the open or close status does not get updated in Home Assistant. Untill a short time ago, not a big problem, but now after HA was updated, the blind keeps on openening and closing. I have tried several D1 mini's, all give the same result. Is there something you can do in the Firmware to solve this issue?

Thanks very much.

With kind regards, Dennis

Schermafbeelding 2021-11-20 141319

kp-bit commented 2 years ago

I had the exact same problem after the latest HA update. You can use MQTT Explorer to clear out lingering commands in the MQTT queue and update to this v1.0beta .bin, that has fixed it for me. Expecting to release it in a couple of weeks... xblinds-v1.0b.zip

denniskoenders commented 2 years ago

Thanks very much. The screen works again, but still no correct status in Home Assistant. Will this also be fixed in a future Software update?  Thanks again.  Dennis