search

kraakenstuff / ADSR

2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)
31 stars 9 forks source link

ADSR base pcb unconnected trace #1

Open justjoheinz opened 4 years ago

justjoheinz commented 4 years ago

Unfortunately I just ordered some PCBs after I noticed in the Kicad file that there is one unconnected trace near D6 which you can find by invoking the Design Rule Checks.

mannes commented 4 years ago

@justjoheinz you probably need not worry, the traces should still connect through the power header solder holes. You can check that out in kicad too. Have you received/tested the PCBs already?

justjoheinz commented 4 years ago

I got them today and the ordered parts are on the way. Will do some measuring once I am home.

mannes commented 4 years ago

I've ordered a couple PCBs too, will post back when i find out this is a problem or not :)

justjoheinz commented 4 years ago

I build mine now but have not tested it yet as the panel pcb holes for the pots are to narrow and I will need to widen them.

Another issue was with the power connector. It was a very tight fit but worked.

supermorel commented 4 years ago

So? Working or not?

mannes commented 4 years ago

So? Working or not?

Didn't get to building it myself yet, however i have seen several successful builds on the facebook eurorack diy group. Had no trouble test-fitting (Song Huei) pots and (shroud less) power connector though

kraakenstuff commented 2 years ago

What's that unconnected trace near the D6? Screenshot - 10 9 2021 , 18_02_49