kramble / FPGA-Litecoin-Miner

A litecoin scrypt miner implemented with FPGA on-chip memory.
GNU General Public License v3.0
277 stars 125 forks source link

no files matched glob pattern "*.sof" #18

Open RDMMDLC opened 2 years ago

RDMMDLC commented 2 years ago

program-fpga-board.bat


no files matched glob pattern ".sof" while executing "glob .sof" invoked from within "set sof_files [glob *.sof]" (file "program-fpga-board.tcl" line 69)

Error (23031): Evaluation of Tcl script program-fpga-board.tcl unsuccessful Error: Quartus Prime Signal Tap was unsuccessful. 1 error, 0 warnings Error: Peak virtual memory: 424 megabytes Error: Processing ended: Tue Oct 19 23:38:12 2021 Error: Elapsed time: 00:00:02 Error: Total CPU time (on all processors): 00:00:00 Presione una tecla para continuar . . .

RDMMDLC commented 2 years ago

Which SOF would you like to use? 1

Selected SOF file: ltcminer.sof

Programming ...

Result: Info: ** * Info: Running Quartus Prime Programmer Info: Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition Info: Copyright (C) 2020 Intel Corporation. All rights reserved. Info: Your use of Intel Corporation's design tools, logic functions Info: and other software and tools, and any partner logic Info: functions, and any output files from any of the foregoing Info: (including device programming or simulation files), and any Info: associated documentation or information are expressly subject Info: to the terms and conditions of the Intel Program License Info: Subscription Agreement, the Intel Quartus Prime License Agreement, Info: the Intel FPGA IP License Agreement, or other applicable license Info: agreement, including, without limitation, that your use is for Info: the sole purpose of programming logic devices manufactured by Info: Intel and sold by Intel or its authorized distributors. Please Info: refer to the applicable agreement for further details, at Info: https://fpgasoftware.intel.com/eula. Info: Processing started: Wed Oct 20 01:33:37 2021 Info: Command: quartus_pgm -c "USB-Blaster [USB-0]" -m JTAG -o P;ltcminer.sof Info (213045): Using programming cable "USB-Blaster [USB-0]" Info (213011): Using programming file ltcminer.sof with checksum 0x00D177D7 for device EP4CE22F17@1 Info (209060): Started Programmer operation at Wed Oct 20 01:33:38 2021 Error (209015): Can't configure device. Expected JTAG ID code 0x020F30DD for dev ice 1, but found JTAG ID code 0x020F10DD. Make sure the location of the target d evice on the circuit board matches the device's location in the device chain in the Chain Description File (.cdf). Error (209012): Operation failed Info (209061): Ended Programmer operation at Wed Oct 20 01:33:38 2021 Error: Quartus Prime Programmer was unsuccessful. 2 errors, 0 warnings Error: Peak virtual memory: 295 megabytes Error: Processing ended: Wed Oct 20 01:33:38 2021 Error: Elapsed time: 00:00:01 Error: Total CPU time (on all processors): 00:00:01 child process exited abnormally

ERROR: Programming failed.

Info (23030): Evaluation of Tcl script program-fpga-board.tcl was successful Info: Quartus Prime Signal Tap was successful. 0 errors, 0 warnings Info: Peak virtual memory: 425 megabytes Info: Processing ended: Wed Oct 20 01:33:38 2021 Info: Elapsed time: 00:00:05 Info: Total CPU time (on all processors): 00:00:00 Presione una tecla para continuar . . .

RDMMDLC commented 2 years ago

info altera cyclone iv EP4CE6E22C8N