Open maaland opened 6 years ago
In addition to 3V3 power and ground, and SDA/SCL you have to pull the WAK pin LOW to enable the CCS811.
On Thu, Jun 14, 2018 at 1:17 AM, Marius Maaland notifications@github.com wrote:
I'm trying to hook this up with an Arduino Uno but I am not sure of what to connect where. I have rewritten the wire.transfer methods do be compatible and the code is now compiling but I'm unable to connect to the sensor. Do you have an example wiring picture or something available that could help?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/CCS811/issues/3, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qv18mbHcNe4GNv3HXTedr4ERqMeBks5t8hwSgaJpZM4UngYV .
I'm trying to hook this up with an Arduino Uno but I am not sure of what to connect where. I have rewritten the wire.transfer methods do be compatible and the code is now compiling but I'm unable to connect to the sensor. Do you have an example wiring picture or something available that could help?