search

kriswiner / CMWX1ZZABZ

Collection of sketches using the Arduino core for Murata's CMWX1ZZABZ (STM32L082 and SX1276)
93 stars 29 forks source link

AT COMANDS #32

Open JonathanDYSIoT opened 3 years ago

JonathanDYSIoT commented 3 years ago

Hi Kriss i am working with gnat, and I wanna know about parameters like SNR and RSSI, I read that I can do this with at commands if you have something about this and you can help me I will be gratefull with you. Because for COVID-19 I don´t have access to measurement equipment to evaluated these parameters, and I need to test the service of network.

I have another problem with SF, I´m working whit a dragino LG02 gateway, when I change the parameter to reach a higher rank, I don´t recieve anithing, I don´t know why it happens, I change the paramether in both devices

thank you Kris

kriswiner commented 3 years ago

Normally, if you are using LoraWAN, the signal strength is part of the message received by the gateway. It is not something you typically query from the device.

If you want to use AT commands, you will need to load Murata firmware that supports this. Please look at their website.

I haven;t used the LG02 gateway so don;t have much to offer here. Is it a LoRaWAN gateway? Some of them only support LoRa radio or FSK protocols, i.e., point-to-point transmission. But perhaps you need to ask Dragino how to manage this?

On Wed, Apr 7, 2021 at 7:01 PM JonathanDYSIoT @.***> wrote:

Hi Kriss i am working with gnat, and I wanna know about parameters like SNR and RSSI, I read that I can do this with at commands if you have something about this and you can help me I will be gratefull with you. Because for COVID-19 I don´t have access to measurement equipment to evaluated these parameters, and I need to test the service of network.

I have another problem with SF, I´m working whit a dragino LG02 gateway, when I change the parameter to reach a higher rank, I don´t recieve anithing, I don´t know why it happens, I change the paramether in both devices

thank you Kris

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/CMWX1ZZABZ/issues/32, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABTDLKVPWOAKOR4DPDSZALLTHUFAZANCNFSM42R4SLBA .