search

kriswiner / EM7180_SENtral_sensor_hub

(Affordable) Ultimate Sensor Fusion Solution
https://www.tindie.com/products/onehorse/ultimate-sensor-fusion-solution/
96 stars 37 forks source link

EM7180 Nano Board #16

Open ReneKaminski opened 6 years ago

ReneKaminski commented 6 years ago

Hello Kris, Sorry that I contact you this way, but the Facebook app on your Tindie account isn't working for me. Me and another project group at my university are working on a project concerning orientation. We tried the BNO055 but are not getting reasonable results out of this thing. We read your article about the EM7180 but couldn't find the Nano board in your Tindie Shop. Are you still selling them?
Kind regards, René

kriswiner commented 6 years ago

Hi Rene,

You can reach me at tleracorp@gmail.com.

I never put the EM7180 Nano board design up for sale at Tindie, I just designed and tested a couple to prove feasibility.

We currently sell only the USFS version you can see here:

https://www.tindie.com/products/onehorse/ultimate-sensor-fusion-solution

Is smaller size a requirement for your application?

Kris

On Mon, Oct 23, 2017 at 5:44 AM, ReneKaminski notifications@github.com wrote:

Hello Kris, Sorry that I contact you this way, but the Facebook app on your Tindie account isn't working for me. Me and another project group at my university are working on a project concerning orientation. We tried the BNO055 but are not getting reasonable results out of this thing. We read your article about the EM7180 but couldn't find the Nano board in your Tindie Shop. Are you still selling them?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/16, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qu7yDYCY2eP0gJESHqxipVUITrcNks5svIpDgaJpZM4QCx1A .

ReneKaminski commented 6 years ago

Hello Mr. Winer (?), many thanks for the prompt reply. The MPU9250 s have to be woven/glued into/onto the fingers of a glove and also on the back of the hand. This will become the remote for a robot hand. In my case it´s going onto shoulder and arm. While the bigger breakout would work for me, the smaller one would be definitely more sophisticated for the glove. Kind regards, René

kriswiner commented 6 years ago

Well, if you are careful, you could just trim 1-mm from each edge and cut the size down that way. But I have no plans to produce the Nano version for sale at Tindie.

If you wanted to buy 100 of them, on the other hand, I could have them produced in China, but this would take six weeks or so.

On Mon, Oct 23, 2017 at 11:06 AM, ReneKaminski notifications@github.com wrote:

Hello Mr. Winer (?), many thanks for the prompt reply. The MPU9250 s have to be woven/glued into/onto the fingers of a glove and also on the back of the hand. This will become the remote for a robot hand. In my case it´s going onto shoulder and arm. While the bigger breakout would work for me, the smaller one would be definitely more sophisticated for the glove. Kind regards, René

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/16#issuecomment-338746601, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qhhoVRQjXLFe175avtf5ipOLjyy9ks5svNWagaJpZM4QCx1A .

ReneKaminski commented 6 years ago

Sorry for my delayed answer. I discussed your offering with my colleauges. We appreciate your offer very much, but we can't wait 6 weeks because of our deadline. Kind regards, René

kriswiner commented 6 years ago

OK Rene,

Perhaps the USFS https://www.tindie.com/products/onehorse/ultimate-sensor-fusion-solution/?pt=full_prod_search would do? These are available now and I could offer you a 10% discount for an order of 10 or more. I mean order nine get one free!

Anyway, let me know if I can help.

Kris

On Tue, Oct 24, 2017 at 11:53 PM, ReneKaminski notifications@github.com wrote:

Sorry for my delayed answer. I discussed your offering with my colleauges. We appreciate your offer very much, but we can't wait 6 weeks because of our deadline. Kind regards, René

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/16#issuecomment-339232545, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qhG-8EZB_gXc7E1pkYI5VFE5h8V-ks5svtrrgaJpZM4QCx1A .

ReneKaminski commented 6 years ago

Hello Kris, do you know the delivery time from your Tindie Shop to Germany by chance? Kind regards, René

kriswiner commented 6 years ago

Hi Rene,

Let's switch further discussion to regular e-mail. I am at tleracorp@gmail.com. If I get the package in the mail today (Friday) you would have them next week.

Kris

On Fri, Oct 27, 2017 at 1:21 AM, ReneKaminski notifications@github.com wrote:

Hello Kris, do you know the delivery time from your Tindie Shop to Germany by chance? Kind regards, René

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/16#issuecomment-339906095, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qnaGgq-p_RlZ8i1z0lk5_PBeOuChks5swZJxgaJpZM4QCx1A .