kriswiner
commented
5 years ago Looks like the EEPROM has been damaged. I suggest you replace the USFS board to get g oing again and inspect the damaged board to find out what caused the damage to avoid it in the future.
On Fri, May 10, 2019 at 5:59 AM Nicrodk notifications@github.com wrote:
Hello Kris, I have been using the USF for a few weeks now for my semester project and it was working perfectly but then suddenly it stopped being able to load up the EEPROM and when I loaded up the EM71280_MPU9250_BMP280_M24512DFC_WS_Acc_Cal.ino this is what I ended up with [image: image] https://user-images.githubusercontent.com/16134221/57528958-f6a44d80-7333-11e9-9e0b-f9ed6baadde8.png Our project has the USF inside of a drumstick and we used some cotton wool to make sure that it wouldn't be damaged inside and as mentioned it has been working for a few weeks but now suddenly it seems like it cannot find the EEPROM, any suggestions on how to approach this?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/57, or mute the thread https://github.com/notifications/unsubscribe-auth/ABTDLKTDCJQVB4SAPPQ74HLPUVWTPANCNFSM4HMC4IQA .
Nicrodk
Hello Kris, I have been using the USF for a few weeks now for my semester project and it was working perfectly but then suddenly it stopped being able to load up the EEPROM and when I loaded up the EM71280_MPU9250_BMP280_M24512DFC_WS_Acc_Cal.ino this is what I ended up with
Our project has the USF inside of a drumstick and we used some cotton wool to make sure that it wouldn't be damaged inside and as mentioned it has been working for a few weeks but now suddenly it seems like it cannot find the EEPROM, any suggestions on how to approach this?