Closed jcorbett closed 4 years ago
No reason for you to interact with the eeprom in master mode, in pass through mode it will appear at 0x50 and 0x58.
On Tue, Oct 8, 2019 at 4:13 PM Justin Corbett notifications@github.com wrote:
Hi Kris, should the M24512DFM show up with i2cdetect at 0x50? On a Jetson, I can talk with the EM7180 just fine at 0x28 targeting different registers, but I'm unable to see or interact with the EEPROM.
Thanks!
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/62?email_source=notifications&email_token=ABTDLKTJOKDYTQXUKYQN5H3QNUHYPA5CNFSM4I6YEV42YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQPMS7Q, or mute the thread https://github.com/notifications/unsubscribe-auth/ABTDLKUTENMSDGMXT3OLJ6DQNUHYPANCNFSM4I6YEV4Q .
Thank you for the quick response! Okay, that makes sense, is this the best repo for calibration & warm start templates?
https://github.com/gregtomasch/EM7180_SENtral_Calibration
On Tue, Oct 8, 2019 at 4:55 PM Justin Corbett notifications@github.com wrote:
Thank you for the quick response! Okay, that makes sense, is this the best repo for calibration & warm start templates?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kriswiner/EM7180_SENtral_sensor_hub/issues/62?email_source=notifications&email_token=ABTDLKRX3LJYVX5G5PW222LQNUMX5A5CNFSM4I6YEV42YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAV7QLA#issuecomment-539752492, or mute the thread https://github.com/notifications/unsubscribe-auth/ABTDLKVWML3LA7NFW7WGA63QNUMX5ANCNFSM4I6YEV4Q .
Hi Kris, should the M24512DFM show up with i2cdetect at 0x50? On a Jetson, I can talk with the EM7180 just fine at 0x28 targeting different registers, but I'm unable to see or interact with the EEPROM.
Thanks!