search

kriswiner / MPU9250

Arduino sketches for MPU9250 9DoF with AHRS sensor fusion
1.04k stars 471 forks source link

Too large for Pro Mini #167

Open sbishop61 opened 7 years ago

sbishop61 commented 7 years ago

Kris, please excuse a newbie but I can't get your sketches to fit within a Pro Mini.

I am trying to use 9250 + BMP280 and second set up 9250 + MS5611. Happy to have serial output no screen at this stage.

Any clue as to what I need to configure the sketch etc so to fit the Pro Mini?

Thanks Stephen

kriswiner commented 7 years ago

Yes, 12 kB is pretty small. I have no solution if you have to use a Pro Mini (which I love too) except for paring the sketch to the bare minimum maybe, but I haven't used one for years since I discovered the Teensy (option 1) and then started making my own development boards. I think you would like Ladybug (option2) which has the same form factor as the Pro Mini but is programmed via the USB using the Arduino IDE.

https://www.tindie.com/products/TleraCorp/ladybug-stm32l432-development-board/

Kris

On Wed, Aug 2, 2017 at 3:10 AM, sbishop61 notifications@github.com wrote:

Kris, please excuse a newbie but I can't get your sketches to fit within a Pro Mini.

I am trying to use 9250 + BMP280 and second set up 9250 + MS5611. Happy to have serial output no screen at this stage.

Any clue as to what I need to configure the sketch etc so to fit the Pro Mini?

Thanks Stephen

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kriswiner/MPU9250/issues/167, or mute the thread https://github.com/notifications/unsubscribe-auth/AGY1qiKDfM0X9ehK22YMovJe6wODehxbks5sUEscgaJpZM4Oq4Ng .