krontech pychronos issues

krontech / pychronos

Python bindings for the Chronos High Speed Camera

GNU General Public License v3.0

3 stars 2 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

V0.7 changes

#63 nfaliszewski closed 3 years ago
0
Noise reduction 2020

#62 nfaliszewski closed 3 years ago
0
Check fpga record status

#61 sanjpm closed 4 years ago
0
There is no API call to or mechanism to change video states.

#60 oskirby closed 4 years ago
0
API registration should be delayed until after sensor init

#59 oskirby opened 4 years ago
1
lux1310: ADC offset calibration error leaves sensor in test mode.

#58 oskirby opened 4 years ago
0
Added import and export functions for lux2100 column gain cal.

#57 sanjpm closed 4 years ago
1
fanOverride should be able to specify exact fan speed

#56 oskirby closed 4 years ago
0
Add parameter to configure digital gain

#55 oskirby closed 4 years ago
0
New sensor timing block takes too long to switch programs

#54 oskirby opened 4 years ago
0
Bottom line of frame is corrupted

#53 oskirby opened 4 years ago
1
API emits updates update signal for unknown value 'videoZoom'.

#52 DDR0 closed 5 years ago
0
batteryPresent API value does not notify when battery removed or reinserted

#51 DDR0 closed 4 years ago
0
Can't set full-frame video to 2x zoom with video's configure method.

#50 DDR0 closed 5 years ago
3
Focus peaking level sometimes isn't gettable.

#49 DDR0 opened 5 years ago
2
Zebra Stripes isn't settable.

#48 DDR0 closed 5 years ago
1
API call to set fan speed

#47 DDR0 closed 4 years ago
0
API call to retrieve sensor temperature

#46 DDR0 closed 4 years ago
0
Setting focus peaking to 0.00001 is very different than 0.00000.

#45 DDR0 opened 5 years ago
0
API call to turn off screen

#44 DDR0 opened 5 years ago
0
API for Spectrograph

#43 DDR0 opened 5 years ago
0
API for Motion Triggering

#42 DDR0 opened 5 years ago
1
Save and Power Down on Low Power should be cancellable?

#41 DDR0 closed 4 years ago
1
Network storage should be exposed through the API.

#40 DDR0 opened 5 years ago
1
When Samba shares are misconfigured, externalStorage takes 10s to return.

#39 DDR0 closed 4 years ago
0
stamp settings not exposed through api

#38 DDR0 opened 5 years ago
0
API trigger/io start action doesn't seem to start anything? (I'm probably holding it wrong.)

#37 DDR0 opened 5 years ago
0
Black cal causes gui2 to error out waiting for dbus messages.

#36 DDR0 opened 5 years ago
0
Tally light doesn't activate during black cal with 'auto' cameraTallyMode.

#35 DDR0 opened 5 years ago
0
'delayTime' parameter cannot be set using 'ioMappingDelay' through cam-json

#34 nfaliszewski closed 4 years ago
1
ioDetailedStatus api value is undocumented

#33 DDR0 closed 4 years ago
1
ioStatusSourceIo1, ioStatusSourceIo2, ioStatusSourceIo3 api values are undocumented

#32 DDR0 closed 4 years ago
1
API emits updates update signal for unknown value 'videoSegments'.

#31 DDR0 closed 5 years ago
0
API returns value of wrong type for ioMapping debounce and delay.

#30 DDR0 closed 5 years ago
0
API ioMapping ignores typos, should error instead

#29 DDR0 opened 5 years ago
0
Save and power down on battery level always power down, regardless of level set.

#28 DDR0 closed 4 years ago
1
API can't distinguish between user cal and factory cal data; saves to same folder.

#27 DDR0 closed 5 years ago
1
While saving, most (all?) control api calls take >100ms.

#26 DDR0 opened 5 years ago
1
Make one of the API calls be "reboot".

#25 DDR0 closed 4 years ago
0
Move error reporting into its own signal.

#24 oskirby closed 4 years ago
1
Video system takes too long to transition between states

#23 oskirby closed 5 years ago
0
Video API crashes switching between preview and live mode.

#22 DDR0 closed 5 years ago
2
NameError: name 'gclient' is not defined.

#21 DDR0 closed 5 years ago
2
API crashes sometimes when getting battery voltage.

#20 DDR0 closed 5 years ago
1
The API returns constant battery charge.

#19 DDR0 closed 5 years ago
1
Added non-polling battery data

#18 jthco closed 5 years ago
2
pysetup.py install does not configure for the systemd startup.

#17 jthco closed 5 years ago
1
Suspicious mock activity when setting exposure.

#16 DDR0 closed 5 years ago
2
Pychronos dies upon trying to set specific resolution.

#15 DDR0 opened 5 years ago
1
`resolution` property should return min and max exposure as well as min frame time.

#14 DDR0 closed 5 years ago
1