search

kuba-moo / mt7601u

Linux mac80211-based driver for Mediatek MT7601U USB bgn WiFi dongle
284 stars 111 forks source link

kernel 4.0.15 ，insmod 出现下面错误 #86

Closed Clssrie closed 3 years ago

Clssrie commented 4 years ago

[ 86.812115] mt7601u: disagrees about version of symbol module_layout [ 314.363365] usb 1-1: USB disconnect, device number 4 [ 314.368570] mt7601u: probe of 1-1:1.0 failed with error -5 [ 314.378700] usbcore: registered new interface driver mt7601u [ 314.493142] usb 1-1: new full-speed USB device number 5 using ci_hdrc [ 314.733284] usb 1-1: new full-speed USB device number 6 using ci_hdrc [ 314.973373] usb 1-1: new full-speed USB device number 7 using ci_hdrc [ 315.007776] usb 1-1: No LPM exit latency info found, disabling LPM. [ 315.014773] usb 1-1: not running at top speed; connect to a high speed hub [ 315.173413] mt7601u: probe of 1-1:1.0 failed with error -5 [ 315.181230] usb 1-1: USB disconnect, device number 7 [ 315.303150] usb 1-1: new full-speed USB device number 8 using ci_hdrc [ 315.543259] usb 1-1: new full-speed USB device number 9 using ci_hdrc [ 315.783199] usb 1-1: new full-speed USB device number 10 using ci_hdrc [ 315.817773] usb 1-1: No LPM exit latency info found, disabling LPM. [ 315.824764] usb 1-1: not running at top speed; connect to a high speed hub [ 315.983497] mt7601u: probe of 1-1:1.0 failed with error -5 [ 315.991399] usb 1-1: USB disconnect, device number 10 [ 316.113148] usb 1-1: new full-speed USB device number 11 using ci_hdrc [ 316.353250] usb 1-1: new full-speed USB device number 12 using ci_hdrc [ 316.593424] usb 1-1: new full-speed USB device number 13 using ci_hdrc [ 316.627777] usb 1-1: No LPM exit latency info found, disabling LPM. [ 316.634765] usb 1-1: not running at top speed; connect to a high speed hub [ 316.793395] mt7601u: probe of 1-1:1.0 failed with error -5 [ 316.801540] usb 1-1: USB disconnect, device number 13 [ 316.923155] usb 1-1: new full-speed USB device number 14 using ci_hdrc [ 317.163324] usb 1-1: new full-speed USB device number 15 using ci_hdrc [ 317.403308] usb 1-1: new high-speed USB device number 16 using ci_hdrc [ 317.583174] usb 1-1: reset high-speed USB device number 16 using ci_hdrc [ 317.737413] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision: 76010500 [ 317.819970] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d [ 317.826358] mt7601u 1-1:1.0: EEPROM ver:0d fae:00 [ 318.078363] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' [ 318.408833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

kuba-moo commented 3 years ago

Not enough info to investigate this.