Open shadow-identity opened 9 years ago
another one back trace, @kuba-moo
But when I'm in console (alt+2 or so), it floods my monitor. when I'm in graphical mode, it just hangs.
journalctl:
Sooo... After make dkms
it can work about 5 minutes, but then it hangs.
dmesg
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.4-301.fc22.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 5.1.1 20150422 (Red Hat 5.1.1-1) (GCC) ) #1 SMP Thu May 21 13:10:33 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/mapper/luks-e6abdf97-9132-4983-b036-d1b53a5a3dd4 ro rd.lvm.lv=fedora_nedrigailov/00 rd.lvm.lv=fedora_nedrigailov/01 rd.luks.uuid=luks-e6abdf97-9132-4983-b036-d1b53a5a3dd4 rd.luks.uuid=luks-87ddb875-65e5-4b90-8adf-1b616f51627c rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9923fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9924000-0x00000000b992afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b992b000-0x00000000ba1a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba1a1000-0x00000000ba429fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba42a000-0x00000000c98e4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98e5000-0x00000000c9aecfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aed000-0x00000000c9e18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e19000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. TP300LD/TP300LD, BIOS TP300LD.201 05/28/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x32f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
[ 0.000000] 2 base 0300000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 0330000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 032F800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 032F400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
[ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE
[ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x32f000000-0x32f1fffff]
[ 0.000000] [mem 0x32f000000-0x32f1fffff] page 2M
[ 0.000000] BRK [0x02021000, 0x02021fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x320000000-0x32effffff]
[ 0.000000] [mem 0x320000000-0x32effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x300000000-0x31fffffff]
[ 0.000000] [mem 0x300000000-0x31fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9923fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb97fffff] page 2M
[ 0.000000] [mem 0xb9800000-0xb9923fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb992b000-0xba1a0fff]
[ 0.000000] [mem 0xb992b000-0xb99fffff] page 4k
[ 0.000000] [mem 0xb9a00000-0xb9ffffff] page 2M
[ 0.000000] [mem 0xba000000-0xba1a0fff] page 4k
[ 0.000000] BRK [0x02022000, 0x02022fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba42a000-0xc98e4fff]
[ 0.000000] [mem 0xba42a000-0xba5fffff] page 4k
[ 0.000000] [mem 0xba600000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98e4fff] page 4k
[ 0.000000] BRK [0x02023000, 0x02023fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aed000-0xc9e18fff]
[ 0.000000] [mem 0xc9aed000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e18fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3594b000-0x36c9dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E9D088 000094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EB3378 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E9D230 016144 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1AF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EB3488 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EB3500 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EB3548 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EB3610 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EB36A8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EB3BE8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EB46C0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9EB4700 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EB4738 0002D7 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EB4A10 003F21 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB8938 000C30 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EB9568 0014A8 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AEBE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000032f1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x32f1e5000-0x32f1f8fff]
[ 0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880322800000-ffff88032e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000032f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9923fff]
[ 0.000000] node 0: [mem 0x00000000b992b000-0x00000000ba1a0fff]
[ 0.000000] node 0: [mem 0x00000000ba42a000-0x00000000c98e4fff]
[ 0.000000] node 0: [mem 0x00000000c9aed000-0x00000000c9e18fff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000032f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032f1fffff]
[ 0.000000] On node 0 totalpages: 3115805
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12839 pages used for memmap
[ 0.000000] DMA32 zone: 821634 pages, LIFO batch:31
[ 0.000000] Normal zone: 35784 pages used for memmap
[ 0.000000] Normal zone: 2290176 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9924000-0xb992afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba1a1000-0xba429fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98e5000-0xc9aecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e19000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88032ee00000 s91608 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s91608 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3067097
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/mapper/luks-e6abdf97-9132-4983-b036-d1b53a5a3dd4 ro rd.lvm.lv=fedora_nedrigailov/00 rd.lvm.lv=fedora_nedrigailov/01 rd.luks.uuid=luks-e6abdf97-9132-4983-b036-d1b53a5a3dd4 rd.luks.uuid=luks-87ddb875-65e5-4b90-8adf-1b616f51627c rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 12163288K/12463220K available (7735K kernel code, 1149K rwdata, 3340K rodata, 1500K init, 1524K bss, 299932K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:65792 nr_irqs:728 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.410 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.82 BogoMIPS (lpj=2394410)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20150204
[ 0.021500] ACPI: All ACPI Tables successfully acquired
[ 0.022492] Security Framework initialized
[ 0.022499] SELinux: Initializing.
[ 0.022506] SELinux: Starting in permissive mode
[ 0.022506] Yama: becoming mindful.
[ 0.023596] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.026721] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028036] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028056] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028293] Initializing cgroup subsys blkio
[ 0.028295] Initializing cgroup subsys memory
[ 0.028301] Initializing cgroup subsys devices
[ 0.028303] Initializing cgroup subsys freezer
[ 0.028305] Initializing cgroup subsys net_cls
[ 0.028307] Initializing cgroup subsys perf_event
[ 0.028309] Initializing cgroup subsys net_prio
[ 0.028311] Initializing cgroup subsys hugetlb
[ 0.028336] CPU: Physical Processor ID: 0
[ 0.028337] CPU: Processor Core ID: 0
[ 0.028341] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028341] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.029322] mce: CPU supports 7 MCE banks
[ 0.029333] CPU0: Thermal monitoring enabled (TM1)
[ 0.029341] process: using mwait in idle threads
[ 0.029344] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.029345] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.029443] Freeing SMP alternatives memory: 28K (ffffffff81e98000 - ffffffff81e9f000)
[ 0.030535] ftrace: allocating 27845 entries in 109 pages
[ 0.042481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.052494] TSC deadline timer enabled
[ 0.052497] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.052518] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.052537] ... version: 3
[ 0.052538] ... bit width: 48
[ 0.052539] ... generic registers: 4
[ 0.052540] ... value mask: 0000ffffffffffff
[ 0.052541] ... max period: 0000ffffffffffff
[ 0.052541] ... fixed-purpose events: 3
[ 0.052542] ... event mask: 000000070000000f
[ 0.053241] x86: Booting SMP configuration:
[ 0.053242] .... node #0, CPUs: #1
[ 0.065486] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.068628] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068708] #2 #3
[ 0.097287] x86: Booted up 1 node, 4 CPUs
[ 0.097290] smpboot: Total of 4 processors activated (19155.28 BogoMIPS)
[ 0.100929] devtmpfs: initialized
[ 0.103799] PM: Registering ACPI NVS region [mem 0xb9924000-0xb992afff] (28672 bytes)
[ 0.103801] PM: Registering ACPI NVS region [mem 0xc9e19000-0xcab1cfff] (13647872 bytes)
[ 0.104091] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.104093] pinctrl core: initialized pinctrl subsystem
[ 0.104132] RTC time: 11:51:49, date: 07/21/15
[ 0.104238] NET: Registered protocol family 16
[ 0.106780] cpuidle: using governor menu
[ 0.106849] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.106850] ACPI: bus type PCI registered
[ 0.106852] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.106919] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.106921] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.107002] PCI: Using configuration type 1 for base access
[ 0.111073] ACPI: Added _OSI(Module Device)
[ 0.111074] ACPI: Added _OSI(Processor Device)
[ 0.111076] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.111077] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113627] ACPI : EC: EC description table is found, configuring boot EC
[ 0.116256] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.119504] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.121888] ACPI: Dynamic OEM Table Load:
[ 0.121894] ACPI: SSDT 0xFFFF8803205D8C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.122733] ACPI: Dynamic OEM Table Load:
[ 0.122738] ACPI: SSDT 0xFFFF88032055A800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.123617] ACPI: Dynamic OEM Table Load:
[ 0.123621] ACPI: SSDT 0xFFFF8803205AF800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.124980] ACPI: Interpreter enabled
[ 0.124989] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.124996] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.125015] ACPI: (supports S0 S3 S4 S5)
[ 0.125016] ACPI: Using IOAPIC for interrupt routing
[ 0.125040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.126138] ACPI: Power Resource [PC05] (on)
[ 0.136424] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.136430] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.136896] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.137249] PCI host bridge to bus 0000:00
[ 0.137252] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.137254] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.137255] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.137257] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.137258] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.137260] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.137261] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.137262] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.137264] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.137265] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.137266] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.137274] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.137363] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.137374] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.137380] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.137385] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.137464] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.137472] pci 0000:00:03.0: reg 0x10: [mem 0xf7914000-0xf7917fff 64bit]
[ 0.137574] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.137591] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.137646] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.137685] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.137719] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.137738] pci 0000:00:16.0: reg 0x10: [mem 0xf791d000-0xf791d01f 64bit]
[ 0.137804] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.137880] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.137894] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.137956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138000] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.138031] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.138099] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.138140] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.138172] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.138242] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.138287] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.138316] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.138379] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.138431] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.138468] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.138488] pci 0000:00:1d.0: reg 0x10: [mem 0xf791b000-0xf791b3ff]
[ 0.138574] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.138625] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.138659] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.138828] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.138841] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.138848] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.138854] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.138860] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.138866] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.138873] pci 0000:00:1f.2: reg 0x24: [mem 0xf791a000-0xf791a7ff]
[ 0.138907] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.138969] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.138985] pci 0000:00:1f.3: reg 0x10: [mem 0xf7919000-0xf79190ff 64bit]
[ 0.139002] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.139137] acpiphp: Slot [1] registered
[ 0.139141] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.139228] pci 0000:02:00.0: [14c3:7630] type 00 class 0x028000
[ 0.139247] pci 0000:02:00.0: reg 0x10: [mem 0xf7800000-0xf78fffff]
[ 0.139372] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.792476] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.792481] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.792558] pci 0000:03:00.0: [10de:1140] type 00 class 0x030200
[ 0.792574] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.792589] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.792604] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.792614] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.792624] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.792712] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.794486] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.794490] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.794492] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.794498] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.794521] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.795575] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.795616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.795655] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12)
[ 0.795691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.795728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.795764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.795801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.795837] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 12)
[ 0.796104] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.796171] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.796267] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.796269] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.796272] vgaarb: loaded
[ 0.796273] vgaarb: bridge control possible 0000:00:02.0
[ 0.796334] SCSI subsystem initialized
[ 0.796370] libata version 3.00 loaded.
[ 0.796396] ACPI: bus type USB registered
[ 0.796411] usbcore: registered new interface driver usbfs
[ 0.796419] usbcore: registered new interface driver hub
[ 0.796434] usbcore: registered new device driver usb
[ 0.796534] PCI: Using ACPI for IRQ routing
[ 0.797777] PCI: pci_cache_line_size set to 64 bytes
[ 0.797813] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.797814] e820: reserve RAM buffer [mem 0xb9924000-0xbbffffff]
[ 0.797816] e820: reserve RAM buffer [mem 0xba1a1000-0xbbffffff]
[ 0.797817] e820: reserve RAM buffer [mem 0xc98e5000-0xcbffffff]
[ 0.797818] e820: reserve RAM buffer [mem 0xc9e19000-0xcbffffff]
[ 0.797819] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.797821] e820: reserve RAM buffer [mem 0x32f200000-0x32fffffff]
[ 0.797921] NetLabel: Initializing
[ 0.797922] NetLabel: domain hash size = 128
[ 0.797923] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.797934] NetLabel: unlabeled traffic allowed by default
[ 0.797991] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.797996] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.800023] Switched to clocksource hpet
[ 0.805582] pnp: PnP ACPI init
[ 0.805680] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.805684] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.805885] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.805887] system 00:01: [io 0xffff] has been reserved
[ 0.805889] system 00:01: [io 0xffff] has been reserved
[ 0.805890] system 00:01: [io 0xffff] has been reserved
[ 0.805892] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.805893] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.805895] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.805896] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.805898] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.805899] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.805901] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.805928] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.805971] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.805974] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.806015] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.806016] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.806049] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.806051] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.806104] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.806136] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.806386] system 00:08: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.806388] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.806709] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.806711] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.806713] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.806714] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.806716] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.806718] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.806719] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.806721] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.806722] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.806724] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.806726] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.806727] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.806729] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.806792] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.807021] pnp: PnP ACPI: found 11 devices
[ 0.813075] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.813085] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.813089] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.813095] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.813097] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.813101] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.813104] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.813110] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.813111] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.813113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.813115] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.813116] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.813117] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.813119] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.813120] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.813122] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.813123] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff window]
[ 0.813125] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.813127] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.813128] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.813129] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.813163] NET: Registered protocol family 2
[ 0.813381] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.813584] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.813696] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.813712] TCP: reno registered
[ 0.813731] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.813781] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.813852] NET: Registered protocol family 1
[ 0.813866] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.833153] PCI: CLS 64 bytes, default 64
[ 0.833201] Unpacking initramfs...
[ 1.112442] Freeing initrd memory: 19788K (ffff88003594b000 - ffff880036c9e000)
[ 1.112451] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.112454] software IO TLB [mem 0xc58e5000-0xc98e5000] (64MB) mapped at [ffff8800c58e5000-ffff8800c98e4fff]
[ 1.112639] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 1.112689] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 1.112695] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 1.112702] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 1.112709] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 1.112751] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.113056] AVX2 version of gcm_enc/dec engaged.
[ 1.113058] AES CTR mode by8 optimization enabled
[ 1.114878] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.115210] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.115223] Initialise system trusted keyring
[ 1.115248] audit: initializing netlink subsys (disabled)
[ 1.115260] audit: type=2000 audit(1437479509.452:1): initialized
[ 1.115559] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.116877] zpool: loaded
[ 1.116881] zbud: loaded
[ 1.117024] VFS: Disk quotas dquot_6.5.2
[ 1.117055] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.117412] Key type big_key registered
[ 1.117416] SELinux: Registering netfilter hooks
[ 1.118152] alg: No test for stdrng (krng)
[ 1.118160] NET: Registered protocol family 38
[ 1.118173] Key type asymmetric registered
[ 1.118176] Asymmetric key parser 'x509' registered
[ 1.118208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.118235] io scheduler noop registered
[ 1.118237] io scheduler deadline registered
[ 1.118264] io scheduler cfq registered (default)
[ 1.118775] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.118779] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.118792] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.118794] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.118797] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.118810] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.118811] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.118814] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.118820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118861] intel_idle: MWAIT substates: 0x11142120
[ 1.118863] intel_idle: v0.4 model 0x45
[ 1.118864] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.119158] ACPI: AC Adapter [AC0] (on-line)
[ 1.119264] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.119972] ACPI: Lid Switch [LID]
[ 1.120007] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.120010] ACPI: Sleep Button [SLPB]
[ 1.120040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.120042] ACPI: Power Button [PWRF]
[ 1.120681] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.120682] ACPI: Thermal Zone [THRM] (42 C)
[ 1.120749] GHES: HEST is not enabled!
[ 1.120823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.121315] Non-volatile memory driver v1.3
[ 1.121341] Linux agpgart interface v0.103
[ 1.121471] ahci 0000:00:1f.2: version 3.0
[ 1.121580] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.121602] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 1.121605] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.122025] scsi host0: ahci
[ 1.122155] scsi host1: ahci
[ 1.122269] scsi host2: ahci
[ 1.122383] scsi host3: ahci
[ 1.122421] ata1: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a100 irq 43
[ 1.122423] ata2: DUMMY
[ 1.122423] ata3: DUMMY
[ 1.122424] ata4: DUMMY
[ 1.122504] libphy: Fixed MDIO Bus: probed
[ 1.122664] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.122699] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.122797] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
[ 1.122802] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.122876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.122878] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.122879] usb usb1: Product: xHCI Host Controller
[ 1.122881] usb usb1: Manufacturer: Linux 4.0.4-301.fc22.x86_64 xhci-hcd
[ 1.122882] usb usb1: SerialNumber: 0000:00:14.0
[ 1.122994] hub 1-0:1.0: USB hub found
[ 1.123005] hub 1-0:1.0: 9 ports detected
[ 1.125689] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125737] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.125764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.125765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.125767] usb usb2: Product: xHCI Host Controller
[ 1.125768] usb usb2: Manufacturer: Linux 4.0.4-301.fc22.x86_64 xhci-hcd
[ 1.125769] usb usb2: SerialNumber: 0000:00:14.0
[ 1.125882] hub 2-0:1.0: USB hub found
[ 1.125893] hub 2-0:1.0: 4 ports detected
[ 1.126836] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.126842] ehci-pci: EHCI PCI platform driver
[ 1.126926] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.126968] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.126979] ehci-pci 0000:00:1d.0: debug port 2
[ 1.130878] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.130904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791b000
[ 1.136729] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.136774] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136776] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136777] usb usb3: Product: EHCI Host Controller
[ 1.136779] usb usb3: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ehci_hcd
[ 1.136780] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.140308] hub 3-0:1.0: USB hub found
[ 1.140314] hub 3-0:1.0: 2 ports detected
[ 1.140695] ACPI: Battery Slot [BAT0] (battery present)
[ 1.140794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.140800] ohci-pci: OHCI PCI platform driver
[ 1.140810] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.140851] usbcore: registered new interface driver usbserial
[ 1.140857] usbcore: registered new interface driver usbserial_generic
[ 1.140863] usbserial: USB Serial support registered for generic
[ 1.140901] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.143912] i8042: Detected active multiplexing controller, rev 1.1
[ 1.145950] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.145955] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.145960] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.145962] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.145963] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.146112] mousedev: PS/2 mouse device common for all mice
[ 1.146366] rtc_cmos 00:02: RTC can wake from S4
[ 1.146492] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.146520] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.146561] device-mapper: uevent: version 1.0.3
[ 1.146623] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 1.146675] Intel P-state driver initializing.
[ 1.147094] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.147368] usbcore: registered new interface driver usbhid
[ 1.147371] usbhid: USB HID core driver
[ 1.147522] drop_monitor: Initializing network drop monitor service
[ 1.147718] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.147810] TCP: cubic registered
[ 1.147829] Initializing XFRM netlink socket
[ 1.148081] NET: Registered protocol family 10
[ 1.148550] mip6: Mobile IPv6
[ 1.148558] NET: Registered protocol family 17
[ 1.149405] Loading compiled-in X.509 certificates
[ 1.151774] Loaded X.509 cert 'Fedora kernel signing key: 6a006aca14afb65069e2c094cb35ea806e85c24b'
[ 1.151820] registered taskstats version 1
[ 1.152884] Magic number: 7:90:884
[ 1.153087] rtc_cmos 00:02: setting system clock to 2015-07-21 11:51:50 UTC (1437479510)
[ 1.153300] PM: Hibernation image not present or could not be loaded.
[ 1.186224] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.328625] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.340125] usb 2-2: New USB device found, idVendor=8564, idProduct=1000
[ 1.340129] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.340131] usb 2-2: Product: Mass Storage Device
[ 1.340133] usb 2-2: Manufacturer: JetFlash
[ 1.340134] usb 2-2: SerialNumber: 237212158
[ 1.427593] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.429824] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 1.430063] ata1.00: ATA-8: PLEXTOR PX-256M6Pro, 1.03, max UDMA/133
[ 1.430066] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.430383] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 1.430609] ata1.00: configured for UDMA/133
[ 1.430744] scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-256M6 1.03 PQ: 0 ANSI: 5
[ 1.430927] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.430938] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.431017] sd 0:0:0:0: [sda] Write Protect is off
[ 1.431020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.431048] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.431399] sda: sda1 sda2
[ 1.431649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.431894] Freeing unused kernel memory: 1500K (ffffffff81d21000 - ffffffff81e98000)
[ 1.431896] Write protecting the kernel read-only data: 12288k
[ 1.432097] Freeing unused kernel memory: 444K (ffff880001791000 - ffff880001800000)
[ 1.432266] Freeing unused kernel memory: 756K (ffff880001b43000 - ffff880001c00000)
[ 1.433744] random: systemd urandom read with 11 bits of entropy available
[ 1.434301] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.434428] systemd[1]: Detected architecture x86-64.
[ 1.434431] systemd[1]: Running in initial RAM disk.
[ 1.434447] systemd[1]: Set hostname to <nedrigailov>.
[ 1.442578] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.460547] systemd[1]: Reached target Swap.
[ 1.460573] systemd[1]: Starting Swap.
[ 1.460776] systemd[1]: Created slice -.slice.
[ 1.460783] systemd[1]: Starting -.slice.
[ 1.460814] systemd[1]: Listening on Journal Socket.
[ 1.460820] systemd[1]: Starting Journal Socket.
[ 1.460868] systemd[1]: Created slice System Slice.
[ 1.460874] systemd[1]: Starting System Slice.
[ 1.461148] systemd[1]: Starting Setup Virtual Console...
[ 1.461211] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 1.461221] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ 1.461312] systemd[1]: Started Load Kernel Modules.
[ 1.461338] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 1.461368] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.461373] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.461426] systemd[1]: Listening on Journal Audit Socket.
[ 1.461432] systemd[1]: Starting Journal Audit Socket.
[ 1.461443] systemd[1]: Reached target Slices.
[ 1.461448] systemd[1]: Starting Slices.
[ 1.461736] systemd[1]: Starting Apply Kernel Variables...
[ 1.462068] systemd[1]: Starting Journal Service...
[ 1.462093] systemd[1]: Reached target Local File Systems.
[ 1.462107] systemd[1]: Starting Local File Systems.
[ 1.462549] systemd[1]: Starting dracut cmdline hook...
[ 1.462613] systemd[1]: Listening on udev Control Socket.
[ 1.462629] systemd[1]: Starting udev Control Socket.
[ 1.463107] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.463136] systemd[1]: Reached target Timers.
[ 1.463152] systemd[1]: Starting Timers.
[ 1.463192] systemd[1]: Listening on udev Kernel Socket.
[ 1.463204] systemd[1]: Starting udev Kernel Socket.
[ 1.463225] systemd[1]: Reached target Sockets.
[ 1.463235] systemd[1]: Starting Sockets.
[ 1.463941] systemd[1]: Started Apply Kernel Variables.
[ 1.464026] audit: type=1130 audit(1437479510.809:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.466622] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.466654] audit: type=1130 audit(1437479510.812:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.467242] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.470959] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.471002] audit: type=1130 audit(1437479510.816:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.486636] systemd[1]: Started Journal Service.
[ 1.486702] audit: type=1130 audit(1437479510.832:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.522755] audit: type=1130 audit(1437479510.868:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.557048] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.557053] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.557344] hub 3-1:1.0: USB hub found
[ 1.557416] hub 3-1:1.0: 8 ports detected
[ 1.566556] audit: type=1130 audit(1437479510.911:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.589282] audit: type=1130 audit(1437479510.934:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.592770] audit: type=1130 audit(1437479510.938:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.604157] audit: type=1130 audit(1437479510.949:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.638617] wmi: Mapper loaded
[ 1.649703] sdhci: Secure Digital Host Controller Interface driver
[ 1.649714] sdhci: Copyright(c) Pierre Ossman
[ 1.659537] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1.660992] scsi host4: usb-storage 2-2:1.0
[ 1.661095] usbcore: registered new interface driver usb-storage
[ 1.664380] usbcore: registered new interface driver uas
[ 1.678072] [drm] Initialized drm 1.1.0 20060810
[ 1.690509] alg: No test for crc32 (crc32-pclmul)
[ 1.773853] [drm] Memory usable by graphics device = 2048M
[ 1.773857] [drm] Replacing VGA console driver
[ 1.774687] Console: switching to colour dummy device 80x25
[ 1.801962] MXM: GUID detected in BIOS
[ 1.802029] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 1.802078] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 1.802252] pci 0000:03:00.0: optimus capabilities: enabled, status dynamic power,
[ 1.802254] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
[ 1.803868] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.803871] [drm] Driver supports precise vblank timestamp query.
[ 1.803960] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.833044] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.835835] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.836058] fbcon: inteldrmfb (fb0) is primary device
[ 1.837684] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.840115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input12
[ 1.841605] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.844133] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 1.844238] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 1.844533] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0d7000a2
[ 1.844534] nouveau [ DEVICE][0000:03:00.0] Chipset: GF117 (NVD7)
[ 1.844535] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 1.855522] nouveau [ VBIOS][0000:03:00.0] using image from ACPI
[ 1.855590] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 1.855592] nouveau [ VBIOS][0000:03:00.0] version 75.17.85.00.05
[ 1.855751] nouveau [ VBIOS][0000:03:00.0] running init tables
[ 1.932615] usb 3-1.4: New USB device found, idVendor=0489, idProduct=e069
[ 1.932617] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.932618] usb 3-1.4: Product: BT
[ 1.932619] usb 3-1.4: Manufacturer: MediaTek
[ 1.932619] usb 3-1.4: SerialNumber: 1.0
[ 1.938886] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 1.938925] nouveau W[ PFB][0000:03:00.0][0x00000000] reclocking of this ram type unsupported
[ 1.938926] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 1.938927] nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
[ 1.938928] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 2.006193] usb 3-1.5: new high-speed USB device number 4 using ehci-pci
[ 2.116114] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 2.131416] usb 3-1.5: New USB device found, idVendor=064e, idProduct=9700
[ 2.131417] usb 3-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.131418] usb 3-1.5: Product: USB2.0 UVC HD Webcam
[ 2.131419] usb 3-1.5: Manufacturer: SuYin
[ 2.131420] usb 3-1.5: SerialNumber: HF1019-T838-SN03-Rev0101
[ 2.166118] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input11
[ 2.208357] usb 3-1.7: new full-speed USB device number 5 using ehci-pci
[ 2.295551] usb 3-1.7: New USB device found, idVendor=03eb, idProduct=8a41
[ 2.295552] usb 3-1.7: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 2.295553] usb 3-1.7: Manufacturer: Atmel
[ 2.297436] hid-generic 0003:03EB:8A41.0001: hiddev0,hidraw0: USB HID v1.11 Device [Atmel] on usb-0000:00:1d.0-1.7/input0
[ 2.303341] input: Atmel as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:03EB:8A41.0002/input/input14
[ 2.303621] hid-multitouch 0003:03EB:8A41.0002: input,hidraw1: USB HID v1.11 Device [Atmel] on usb-0000:00:1d.0-1.7/input1
[ 2.580480] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 2.580495] nouveau [ PTHERM][0000:03:00.0] internal sensor: no
[ 2.580555] nouveau [ CLK][0000:03:00.0] 07: core 162 MHz memory 405 MHz
[ 2.580567] nouveau [ CLK][0000:03:00.0] 0f: core 625 MHz memory 900 MHz
[ 2.580745] nouveau [ CLK][0000:03:00.0] --: core 270 MHz memory 324 MHz
[ 2.585779] vga_switcheroo: enabled
[ 2.585897] [TTM] Zone kernel: Available graphics memory: 6092902 kiB
[ 2.585898] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.585898] [TTM] Initializing pool allocator
[ 2.585902] [TTM] Initializing DMA pool allocator
[ 2.585910] nouveau [ DRM] VRAM: 2048 MiB
[ 2.585911] nouveau [ DRM] GART: 1048576 MiB
[ 2.585914] nouveau E[ DRM] Pointer to TMDS table invalid
[ 2.585914] nouveau [ DRM] DCB version 4.0
[ 2.585915] nouveau E[ DRM] Pointer to flat panel table invalid
[ 2.593871] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 2.593875] [drm] Initialized nouveau 1.2.1 20120801 for 0000:03:00.0 on minor 1
[ 2.663909] scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 1.00 PQ: 0 ANSI: 5
[ 2.664113] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.664247] sd 4:0:0:0: [sdb] 15435776 512-byte logical blocks: (7.90 GB/7.36 GiB)
[ 2.664358] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.664360] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2.664485] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 2.665791] sdb: sdb1
[ 2.666497] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.890069] Console: switching to colour frame buffer device 240x67
[ 2.895734] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.895746] i915 0000:00:02.0: registered panic notifier
[ 3.117056] Switched to clocksource tsc
[ 5.226687] random: nonblocking pool is initialized
[ 7.597534] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 7.597886] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 7.597892] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 8.013833] audit_printk_skb: 9 callbacks suppressed
[ 8.013836] audit: type=1130 audit(1437479517.353:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2de6abdf97\x2d9132\x2d4983\x2db036\x2dd1b53a5a3dd4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.166348] audit: type=1130 audit(1437479517.506:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.256588] audit: type=1130 audit(1437479517.596:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2d87ddb875\x2d65e5\x2d4b90\x2d8adf\x2d1b616f51627c comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.689739] audit: type=1130 audit(1437479518.029:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.708386] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.747741] audit: type=1130 audit(1437479518.087:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.747762] audit: type=1131 audit(1437479518.087:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.875037] audit: type=1130 audit(1437479518.214:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.880456] audit: type=1130 audit(1437479518.219:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.880471] audit: type=1131 audit(1437479518.219:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.880819] audit: type=1130 audit(1437479518.220:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.913883] systemd-journald[141]: Received SIGTERM from PID 1 (systemd).
[ 8.978565] SELinux: 2048 avtab hash slots, 106273 rules.
[ 8.993389] SELinux: 2048 avtab hash slots, 106273 rules.
[ 9.016670] SELinux: 8 users, 105 roles, 5013 types, 302 bools, 1 sens, 1024 cats
[ 9.016673] SELinux: 83 classes, 106273 rules
[ 9.020091] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 9.020096] SELinux: Class binder not defined in policy.
[ 9.020097] SELinux: the above unknown classes and permissions will be allowed
[ 9.020102] SELinux: Completing initialization.
[ 9.020102] SELinux: Setting up existing superblocks.
[ 9.030919] systemd[1]: Successfully loaded SELinux policy in 69.738ms.
[ 9.058158] systemd[1]: Relabelled /dev and /run in 15.034ms.
[ 9.170507] EXT4-fs (dm-2): re-mounted. Opts: (null)
[ 9.215255] RPC: Registered named UNIX socket transport module.
[ 9.215257] RPC: Registered udp transport module.
[ 9.215258] RPC: Registered tcp transport module.
[ 9.215259] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.219930] systemd-journald[671]: File /var/log/journal/030c34797d5d4a67a084b92eeee3a8fb/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.310333] systemd-journald[671]: Received request to flush runtime journal from PID 1
[ 9.313634] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.511951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.528800] media: Linux media interface: v0.10
[ 9.550248] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150204/utaddress-254)
[ 9.550256] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 9.550261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.550382] mt76xx: module verification failed: signature and/or required key missing - tainting kernel
[ 9.551342] chip id = 76300002
[ 9.552459] Linux video capture interface: v2.00
[ 9.557336] Firmware file "mt76x0.bin" Found
[ 9.557339] bulk_tx_ep = 2
[ 9.557871] mtk_usb_reset
[ 9.611625] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.617496] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[ 9.623968] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input15
[ 9.624092] usbcore: registered new interface driver uvcvideo
[ 9.624094] USB Video Class driver (1.1.1)
[ 9.657451] sound hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.657456] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.657459] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.657461] sound hdaudioC1D0: mono: mono_out=0x0
[ 9.657462] sound hdaudioC1D0: inputs:
[ 9.657465] sound hdaudioC1D0: Mic=0x12
[ 9.658099] fw version:16.0.151 build:370
[ 9.658102] build Time =201404211629____
[ 9.658109] ILM length = 334408(bytes)
[ 9.658110] DLM length = 47772(bytes)
[ 9.667486] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 9.667575] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 9.667661] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 9.668970] loading fw......
[ 9.691367] cfg80211: Calling CRDA to update world regulatory domain
[ 9.693745] ..
[ 9.699329] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 9.700494] ................loading ILM done
[ 9.724257] ....loading DLM done
[ 9.736759] asus_wmi: ASUS WMI generic driver loaded
[ 9.743561] asus_wmi: Initialization: 0x1
[ 9.743608] asus_wmi: BIOS WMI version: 7.9
[ 9.743675] asus_wmi: SFUN value: 0x4a2877
[ 9.745342] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 9.749134] Adding 16779260k swap on /dev/mapper/luks-87ddb875-65e5-4b90-8adf-1b616f51627c. Priority:-1 extents:1 across:16779260k SSFS
[ 9.757014] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.773067] iTCO_vendor_support: vendor-support=0
[ 9.776327] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.776368] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 9.777264] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.780292] asus_wmi: Backlight controlled by ACPI video driver
[ 9.797545] intel_rapl: Found RAPL domain package
[ 9.797550] intel_rapl: Found RAPL domain core
[ 9.797552] intel_rapl: Found RAPL domain uncore
[ 9.797555] intel_rapl: Found RAPL domain dram
[ 9.829924] loading fw success
[ 9.833662] mtk_loader: done
[ 9.833666] setup_packet in urb: size=8
[ 9.833668] 20 00 00 00 00 00 34 00
transfer_buffer in urb: size=52
[ 9.833673] c3 fc 31 01 00 00 00 00 00 00 00 00 ff fc 03 00 00 00 00 80 8d 0e 3f 76 05 b8 88 00 00 00 ad de a1 c0 b0 1c 03 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00
submit urb:
[ 9.833700] usb_send_vendor_hci_cmd: return=0
[ 9.833702] mtk_bt_loader_probe: ret = 0
[ 9.833751] usbcore: registered new interface driver mtk_bt_loader
[ 9.833845] usb_vendor_hci_cmd_complete
[ 9.837776] cfg80211: World regulatory domain updated:
[ 9.837780] cfg80211: DFS Master region: unset
[ 9.837781] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.837785] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.837787] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.837789] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.837792] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.837795] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.837797] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.837799] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.837802] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.843233] usb 3-1.4: USB disconnect, device number 3
[ 9.843308] mtk_bt_loader_disconnect
[ 9.885400] ==>MT76x0_WLAN_ChipOnOff(): OnOff:1 pAd->WlanFunCtrl.word = 0x0, Reg-WlanFunCtrl=0xff000400
[ 9.885402] WlanFunCtrl.word = 0xffff0403
[ 9.885455] MACVersion = 0x76502000
[ 9.885461] <== MT76x0_WLAN_ChipOnOff(): pAd->WlanFunCtrl.word = 0xffff0403, Reg->WlanFunCtrl=0xffff0f03!
[ 9.885470] MAC_version=0x76300002
[ 9.885474] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 7630, rev 0002 detected
[ 9.887383] MAC: b0:10:41:94:18:55
[ 9.887387] MAC_version=0x76300002
[ 9.887389] RFIC =0x7630
[ 9.887391] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7630 detected
[ 9.887392] rt2x00dev->chip.rt = 0x7630
[ 9.887394] rt2x00dev->chip.rf = 0x7630
[ 9.892309] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.892633] -->RTMPAllocTxRxRingMemory
[ 9.892636] CTRL Ring: total 512 bytes allocated
[ 9.892637] <-- RTMPAllocTxRxRingMemory, Status=0
[ 9.902902] mt7630e 0000:02:00.0 wlp2s0f0: renamed from wlan0
[ 9.914644] cfg80211: Calling CRDA for country: BY
[ 9.916655] cfg80211: Regulatory domain changed to country: BY
[ 9.916659] cfg80211: DFS Master region: ETSI
[ 9.916660] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.916663] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.916665] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.916667] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.916669] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 10.276921] usb 3-1.4: new high-speed USB device number 6 using ehci-pci
[ 10.364080] usb 3-1.4: New USB device found, idVendor=0e8d, idProduct=763f
[ 10.364084] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.364086] usb 3-1.4: Product: BT
[ 10.364087] usb 3-1.4: Manufacturer: MediaTek
[ 10.364088] usb 3-1.4: SerialNumber: 1.0
[ 11.745380] Bluetooth: Core ver 2.20
[ 11.745403] NET: Registered protocol family 31
[ 11.745405] Bluetooth: HCI device and connection manager initialized
[ 11.745411] Bluetooth: HCI socket layer initialized
[ 11.745415] Bluetooth: L2CAP socket layer initialized
[ 11.745425] Bluetooth: SCO socket layer initialized
[ 11.751022] usbcore: registered new interface driver btusb
[ 12.959491] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.959495] Bluetooth: BNEP filters: protocol multicast
[ 12.959500] Bluetooth: BNEP socket layer initialized
[ 13.231540] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 13.248950] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.312819] Ebtables v2.0 registered
[ 13.329947] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 13.569160] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 13.569215] ===>rt2x00lib_start
[ 13.569242] ==>MT76x0_WLAN_ChipOnOff(): OnOff:1 pAd->WlanFunCtrl.word = 0xffff0403, Reg-WlanFunCtrl=0xffff0103
[ 13.569243] Reset(1) WlanFunCtrl.word = 0xffff010f
[ 13.569295] Reset(2) WlanFunCtrl.word = 0xffff0103
[ 13.569347] WlanFunCtrl.word = 0xffff0103
[ 13.569400] MACVersion = 0x76502000
[ 13.569407] <== MT76x0_WLAN_ChipOnOff(): pAd->WlanFunCtrl.word = 0xffff0103, Reg->WlanFunCtrl=0xffff0103!
[ 13.569461] ASIC is ready
[ 13.569469] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'MT7650E234.bin'
[ 13.572059] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 112.3
[ 13.572073] rt2800_load_firmware: COM_REG0(0x730) = 0x1
[ 13.576835] ===>rt2x00lib_enable_radio
[ 13.576875] ===>rt2800_enable_radio:
[ 13.577192] reg FCE_PSE_CTRL =x0
[ 13.577205] rt2800_init_bbp(): Init BBP Registers MT7630
[ 13.578214] BBP version = f000f200
[ 13.578216] rt2800_init_bbp(): Init BBP Registers MT7630
[ 13.578253] rt2800_init_bbp(): Init BBP Registers MT7630 complete
[ 13.578255] ==>rt2800lib_init_queues
[ 13.578257] -->TX_RING: Base=0x0x00000000c5798000, Cnt=64
[ 13.578259] -->TX_RING: Base=0x0x00000000c579a000, Cnt=64
[ 13.578261] -->TX_RING: Base=0x0x00000000c578f000, Cnt=64
[ 13.578263] -->TX_RING: Base=0x0x00000000c4d28000, Cnt=64
[ 13.578265] -->RX_RING: Base=0x0x00000000c5799000, Cnt=128
[ 13.578266] AsicInitTxRxRing
[ 13.578268] -->TX_RING_CTRL: Base=0xc4d70000, Cnt=32!
[ 13.578273] <===rt2800lib_init_queues
[ 13.578275] MAC b0:10:41:94:18:55
[ 13.578283] rt2800_enable_radio -7630 Dual antenna mode
[ 13.588765] rt2800_init_rfcsr(): Init RF Registers MT7630
[ 13.589152] rt2800_init_rfcsr: B0.R22 = 0x65
[ 13.589168] rt2800_init_rfcsr(): Init RF Registers MT7630 complete
[ 13.609545] --> AsicCheckCommanFail2 Timeout Command = 2, CmdStatus= 0x0
[ 13.629912] --> AsicCheckCommanFail2 Timeout Command = 3, CmdStatus= 0x0
[ 13.629924] rtmp_bbp_set_rxpath(): rxpath=1, Set AGC1_R0=0x21400, agc_r0=0x21400
[ 13.629927] rtmp_bbp_set_txdac(): txdac=0, Set txbe=0x0, txbe_r5=0x0
[ 13.631399] set INT_MASK_CSR = 0xdff3ff3
[ 13.631401] ==> RTMPEnableRxTx
[ 13.631404] ==> DMAIdle, GloCfg=0x50
[ 13.631508] <== WRITE DMA offset 0x208 = 0x75
[ 13.631509] <== RTMPEnableRxTx
[ 13.631512] 0x1300 = 00064300
[ 13.631513] rt2800pci_toggle_irq(1):Check if PDMA is idle!
[ 13.631516] ==> DMAIdle, GloCfg=0x75
[ 13.631517] rt2800pci_toggle_irq(2):Check if PDMA is idle!
[ 13.631520] ==> DMAIdle, GloCfg=0x75
[ 13.639668] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 13.801018] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 14.630758] wlp2s0f0: authenticate with 34:db:fd:0a:85:82
[ 14.633365] wlp2s0f0: direct probe to 34:db:fd:0a:85:82 (try 1/3)
[ 14.834358] wlp2s0f0: direct probe to 34:db:fd:0a:85:82 (try 2/3)
[ 14.894373] crc RXD_W3_CIPHER_ERROR
[ 14.894520] crc RXD_W3_CIPHER_ERROR
[ 14.894665] crc RXD_W3_CIPHER_ERROR
[ 15.035539] wlp2s0f0: send auth to 34:db:fd:0a:85:82 (try 3/3)
[ 15.036473] wlp2s0f0: authenticated
[ 15.037537] wlp2s0f0: associate with 34:db:fd:0a:85:82 (try 1/3)
[ 15.040395] wlp2s0f0: RX AssocResp from 34:db:fd:0a:85:82 (capab=0x431 status=0 aid=21)
[ 15.040402] ===>rt2800_sta_add:MT7630
[ 15.040416] ===>rt2800_sta_add:MT7630 wcid=33
[ 15.040417] Connect to AP MAC: 34:db:fd:0a:85:82 WCID=33
[ 15.040422] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 15.040423] SendAndesAFH: -->
[ 15.040425] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 15.040426] AsicSendCmdToAndes not need Rsp!!!
[ 15.040428] CmdUnit->u.ANDES.CmdPayload: ffff88031d8d3614, len = 20
[ 15.040429] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 15.040434] 0x0010 : 01 00 00 00
[ 15.040437] AsicSendCmdToAndes: ffff88031165d580, len = 24
[ 15.040437] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 15.040442] 0x0010 : 01 00 00 00 01 00 00 00
[ 15.040446] Buf: ffff88031165d580, len = 24
[ 15.040446] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 15.040451] 0x0010 : 01 00 00 00 01 00 00 00
[ 15.040455] pPacket->data: ffff8803115ef800, len = 20
[ 15.040456] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 15.040461] 0x0010 : 01 00 00 00
[ 15.040464] PCIKickOutCmd (TxCpuIdx = 1)
[ 15.040464] SendAndesAFH: <--
[ 15.040465] SendAndesWLANStatus: -->
[ 15.040467] SendAndesWLANStatus: CoexOperation = 4, WlanStatus = 15, PrivilegeTime = 0, BssHashID = 1, PktLength = 16
[ 15.040468] AsicSendCmdToAndes not need Rsp!!!
[ 15.040469] CmdUnit->u.ANDES.CmdPayload: ffff88031d8d3608, len = 16
[ 15.040469] 0x0000 : 04 00 00 00 15 00 00 00 00
[ 15.040473] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 15.040474] 00 00 00 01 00 00 00
[ 15.040477] AsicSendCmdToAndes: ffff88031165d580, len = 20
[ 15.040478] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 15.040483] 0x0010 : 01 00 00 00
[ 15.040485] Buf: ffff88031165d580, len = 20
[ 15.040485] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 15.040490] 0x0010 : 01 00 00 00
[ 15.040493] pPacket->data: ffff8803115ef640, len = 16
[ 15.040493] 0x0000 : 04 00 00 00 15 00 00 00 00 00 00 00 01 00 00 00
[ 15.040499] PCIKickOutCmd (TxCpuIdx = 2)
[ 15.040508] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 15.046009] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 15.046011] SendAndesAFH: -->
[ 15.046013] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 15.046014] AsicSendCmdToAndes not need Rsp!!!
[ 15.046015] CmdUnit->u.ANDES.CmdPayload: ffff88031d8d3614, len = 20
[ 15.046016] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 15.046022] 0x0010 : 01 00 00 00
[ 15.046024] AsicSendCmdToAndes: ffff88031165d580, len = 24
[ 15.046025] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 15.046030] 0x0010 : 01 00 00 00 01 00 00 00
[ 15.046033] Buf: ffff88031165d580, len = 24
[ 15.046034] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 15.046039] 0x0010 : 01 00 00 00 01 00 00 00
[ 15.046043] pPacket->data: ffff8803115ef480, len = 20
[ 15.046043] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 15.046048] 0x0010 : 01 00 00 00
[ 15.046051] PCIKickOutCmd (TxCpuIdx = 3)
[ 15.046052] SendAndesAFH: <--
[ 15.046061] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 15.051108] wlp2s0f0: associated
[ 15.051117] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0: link becomes ready
[ 15.051210] cfg80211: Calling CRDA for country: BY
[ 15.055603] cfg80211: Regulatory domain changed to country: BY
[ 15.055606] cfg80211: DFS Master region: ETSI
[ 15.055608] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.055610] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.055612] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.055613] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.055615] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 15.103545] wlp2s0f0: Limiting TX power to 4 dBm as advertised by 34:db:fd:0a:85:82
[ 15.652905] tun: Universal TUN/TAP device driver, 1.6
[ 15.652909] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 15.700820] device virbr0-nic entered promiscuous mode
[ 15.901492] virbr0: port 1(virbr0-nic) entered listening state
[ 15.901505] virbr0: port 1(virbr0-nic) entered listening state
[ 15.940989] virbr0: port 1(virbr0-nic) entered disabled state
[ 19.511217] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 19.511534] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 19.511538] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 21.445668] Adjusting tsc more than 11% (8055288 vs 7777424)
[ 24.876398] fuse init (API version 7.23)
[ 27.097750] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 27.098043] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 27.098048] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 45.112360] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 45.112896] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 45.112905] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 74.285775] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 74.286095] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 74.286099] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 227.665226] ===>rt2800_sta_remove:MT7630
[ 227.722277] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 0, Channel = 1, CentralChannel = 1
[ 227.722279] SendAndesAFH: -->
[ 227.722280] SendAndesAFH: LinkStatus = 2, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 227.722281] AsicSendCmdToAndes not need Rsp!!!
[ 227.722283] CmdUnit->u.ANDES.CmdPayload: ffff8800c49672c4, len = 20
[ 227.722284] 0x0000 : 03 00 00 00 02 00 00 00 01 00 00 00 01 00 00 00
[ 227.722290] 0x0010 : 01 00 00 00
[ 227.722292] AsicSendCmdToAndes: ffff8802e8fe0a80, len = 24
[ 227.722293] 0x0000 : 14 00 10 51 03 00 00 00 02 00 00 00 01 00 00 00
[ 227.722298] 0x0010 : 01 00 00 00 01 00 00 00
[ 227.722301] Buf: ffff8802e8fe0a80, len = 24
[ 227.722302] 0x0000 : 14 00 10 51 03 00 00 00 02 00 00 00 01 00 00 00
[ 227.722307] 0x0010 : 01 00 00 00 01 00 00 00
[ 227.722311] pPacket->data: ffff8803115eb280, len = 20
[ 227.722311] 0x0000 : 03 00 00 00 02 00 00 00 01 00 00 00 01 00 00 00
[ 227.722316] 0x0010 : 01 00 00 00
[ 227.722319] PCIKickOutCmd (TxCpuIdx = 4)
[ 227.722320] SendAndesAFH: <--
[ 227.722329] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 227.727327] ===>rt2800_sta_remove:MT7630 0x80100 = 0x0
[ 227.727329] ===>rt2800_sta_remove:MT7630 0x80100 = 0x0
[ 227.730080] wlp2s0f0: authenticate with 28:c7:ce:54:35:72
[ 227.733149] wlp2s0f0: direct probe to 28:c7:ce:54:35:72 (try 1/3)
[ 227.733217] cfg80211: Calling CRDA to update world regulatory domain
[ 227.740905] cfg80211: World regulatory domain updated:
[ 227.740908] cfg80211: DFS Master region: unset
[ 227.740909] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 227.740911] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 227.740912] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 227.740914] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 227.740915] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 227.740917] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 227.740918] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 227.740919] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 227.740921] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 227.740934] cfg80211: Calling CRDA for country: BY
[ 227.744426] cfg80211: Regulatory domain changed to country: BY
[ 227.744429] cfg80211: DFS Master region: ETSI
[ 227.744431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 227.744433] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 227.744434] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 227.744436] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 227.744437] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 227.934202] wlp2s0f0: direct probe to 28:c7:ce:54:35:72 (try 2/3)
[ 228.135424] wlp2s0f0: send auth to 28:c7:ce:54:35:72 (try 3/3)
[ 228.136403] wlp2s0f0: authenticated
[ 228.137396] wlp2s0f0: associate with 28:c7:ce:54:35:72 (try 1/3)
[ 228.140913] wlp2s0f0: RX AssocResp from 28:c7:ce:54:35:72 (capab=0x431 status=0 aid=24)
[ 228.140921] ===>rt2800_sta_add:MT7630
[ 228.140935] ===>rt2800_sta_add:MT7630 wcid=33
[ 228.140936] Connect to AP MAC: 28:c7:ce:54:35:72 WCID=33
[ 228.140942] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 228.140943] SendAndesAFH: -->
[ 228.140944] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 228.140946] AsicSendCmdToAndes not need Rsp!!!
[ 228.140947] CmdUnit->u.ANDES.CmdPayload: ffff880320a93614, len = 20
[ 228.140948] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 228.140954] 0x0010 : 01 00 00 00
[ 228.140956] AsicSendCmdToAndes: ffff8803131ff760, len = 24
[ 228.140957] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 228.140962] 0x0010 : 01 00 00 00 01 00 00 00
[ 228.140965] Buf: ffff8803131ff760, len = 24
[ 228.140966] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 228.140971] 0x0010 : 01 00 00 00 01 00 00 00
[ 228.140975] pPacket->data: ffff8803114ba100, len = 20
[ 228.140976] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 228.140981] 0x0010 : 01 00 00 00
[ 228.140984] PCIKickOutCmd (TxCpuIdx = 5)
[ 228.140985] SendAndesAFH: <--
[ 228.140986] SendAndesWLANStatus: -->
[ 228.140987] SendAndesWLANStatus: CoexOperation = 4, WlanStatus = 15, PrivilegeTime = 0, BssHashID = 1, PktLength = 16
[ 228.140988] AsicSendCmdToAndes not need Rsp!!!
[ 228.140989] CmdUnit->u.ANDES.CmdPayload: ffff880320a93608, len = 16
[ 228.140989] 0x0000 : 04 00 00 00 15 00 00 00 00 00 00 00
[ 228.140995] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 228.140995] 01
[ 228.140999] 00 00 00
[ 228.141000] AsicSendCmdToAndes: ffff8803131ff760, len = 20
[ 228.141001] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 228.141009] 0x0010 : 01 00 00 00
[ 228.141011] Buf: ffff8803131ff760, len = 20
[ 228.141012] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 228.141020] 0x0010 : 01 00 00 00
[ 228.141023] pPacket->data: ffff8803114b9f40, len = 16
[ 228.141024] 0x0000 : 04 00 00 00 15 00 00 00 00 00 00 00 01 00 00 00
[ 228.141032] PCIKickOutCmd (TxCpuIdx = 6)
[ 228.141039] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 228.146544] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 228.146546] SendAndesAFH: -->
[ 228.146548] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 228.146549] AsicSendCmdToAndes not need Rsp!!!
[ 228.146550] CmdUnit->u.ANDES.CmdPayload: ffff880320a93614, len = 20
[ 228.146551] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 228.146557] 0x0010 : 01 00 00 00
[ 228.146559] AsicSendCmdToAndes: ffff8803131ff760, len = 24
[ 228.146560] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 228.146565] 0x0010 : 01 00 00 00 01 00 00 00
[ 228.146568] Buf: ffff8803131ff760, len = 24
[ 228.146569] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 228.146574] 0x0010 : 01 00 00 00 01 00 00 00
[ 228.146577] pPacket->data: ffff8803114b9d80, len = 20
[ 228.146578] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 228.146583] 0x0010 : 01 00 00 00
[ 228.146585] PCIKickOutCmd (TxCpuIdx = 7)
[ 228.146586] SendAndesAFH: <--
[ 228.146595] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 228.151641] wlp2s0f0: associated
[ 228.151695] cfg80211: Calling CRDA for country: BY
[ 228.153494] cfg80211: Regulatory domain changed to country: BY
[ 228.153496] cfg80211: DFS Master region: ETSI
[ 228.153497] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 228.153499] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 228.153501] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 228.153503] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 228.153504] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 228.237549] wlp2s0f0: Limiting TX power to 4 dBm as advertised by 28:c7:ce:54:35:72
[ 233.270729] ===>rt2800_sta_remove:MT7630
[ 233.335313] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 0, Channel = 1, CentralChannel = 1
[ 233.335316] SendAndesAFH: -->
[ 233.335318] SendAndesAFH: LinkStatus = 2, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 233.335319] AsicSendCmdToAndes not need Rsp!!!
[ 233.335321] CmdUnit->u.ANDES.CmdPayload: ffff88031db036c4, len = 20
[ 233.335323] 0x0000 : 03 00 00 00 02 00 00 00 01 00 00 00 01 00 00 00
[ 233.335331] 0x0010 : 01 00 00 00
[ 233.335334] AsicSendCmdToAndes: ffff8802f889e380, len = 24
[ 233.335335] 0x0000 : 14 00 10 51 03 00 00 00 02 00 00 00 01 00 00 00
[ 233.335342] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.335347] Buf: ffff8802f889e380, len = 24
[ 233.335348] 0x0000 : 14 00 10 51 03 00 00 00 02 00 00 00 01 00 00 00
[ 233.335355] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.335360] pPacket->data: ffff88031155ab00, len = 20
[ 233.335361] 0x0000 : 03 00 00 00 02 00 00 00 01 00 00 00 01 00 00 00
[ 233.335368] 0x0010 : 01 00 00 00
[ 233.335372] PCIKickOutCmd (TxCpuIdx = 8)
[ 233.335373] SendAndesAFH: <--
[ 233.335381] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 233.340381] ===>rt2800_sta_remove:MT7630 0x80100 = 0x0
[ 233.340384] ===>rt2800_sta_remove:MT7630 0x80100 = 0x0
[ 233.351796] cfg80211: Calling CRDA to update world regulatory domain
[ 233.353805] cfg80211: World regulatory domain updated:
[ 233.353808] cfg80211: DFS Master region: unset
[ 233.353809] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 233.353811] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.353813] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.353815] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.353817] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 233.353820] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 233.353822] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 233.353824] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.353826] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 233.353984] cfg80211: Calling CRDA for country: BY
[ 233.355704] cfg80211: Regulatory domain changed to country: BY
[ 233.355707] cfg80211: DFS Master region: ETSI
[ 233.355708] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 233.355711] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.355712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 233.355714] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 233.355715] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 233.474132] wlp2s0f0: authenticate with 34:db:fd:0a:85:82
[ 233.476790] wlp2s0f0: send auth to 34:db:fd:0a:85:82 (try 1/3)
[ 233.477711] wlp2s0f0: authenticated
[ 233.478682] wlp2s0f0: associate with 34:db:fd:0a:85:82 (try 1/3)
[ 233.481778] wlp2s0f0: RX AssocResp from 34:db:fd:0a:85:82 (capab=0x431 status=0 aid=21)
[ 233.481784] ===>rt2800_sta_add:MT7630
[ 233.481798] ===>rt2800_sta_add:MT7630 wcid=33
[ 233.481799] Connect to AP MAC: 34:db:fd:0a:85:82 WCID=33
[ 233.481805] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 233.481806] SendAndesAFH: -->
[ 233.481807] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 233.481808] AsicSendCmdToAndes not need Rsp!!!
[ 233.481810] CmdUnit->u.ANDES.CmdPayload: ffff88031db03614, len = 20
[ 233.481811] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 233.481817] 0x0010 : 01 00 00 00
[ 233.481819] AsicSendCmdToAndes: ffff8800b61cc7c0, len = 24
[ 233.481820] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 233.481825] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.481828] Buf: ffff8800b61cc7c0, len = 24
[ 233.481829] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 233.481834] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.481837] pPacket->data: ffff88030dc81280, len = 20
[ 233.481838] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 233.481843] 0x0010 : 01 00 00 00
[ 233.481845] PCIKickOutCmd (TxCpuIdx = 9)
[ 233.481846] SendAndesAFH: <--
[ 233.481847] SendAndesWLANStatus: -->
[ 233.481849] SendAndesWLANStatus: CoexOperation = 4, WlanStatus = 15, PrivilegeTime = 0, BssHashID = 1, PktLength = 16
[ 233.481850] AsicSendCmdToAndes not need Rsp!!!
[ 233.481851] CmdUnit->u.ANDES.CmdPayload: ffff88031db03608, len = 16
[ 233.481852] 0x0000 : 04 00 00 00 15
[ 233.481855] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 233.481856] 00 00 00 00 00 00 00 01 00 00 00
[ 233.481861] AsicSendCmdToAndes: ffff8800b61cc7c0, len = 20
[ 233.481862] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 233.481869] 0x0010 : 01 00 00 00
[ 233.481871] Buf: ffff8800b61cc7c0, len = 20
[ 233.481872] 0x0000 : 10 00 10 51 04 00 00 00 15 00 00 00 00 00 00 00
[ 233.481877] 0x0010 : 01 00 00 00
[ 233.481879] pPacket->data: ffff88030dc810c0, len = 16
[ 233.481880] 0x0000 : 04 00 00 00 15 00 00 00 00 00 00 00 01 00 00 00
[ 233.481886] PCIKickOutCmd (TxCpuIdx = 10)
[ 233.481895] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 233.487395] BtAFHCtl: COEX AFH Start Ch = 0, AFH End Ch = 47, Channel = 1, CentralChannel = 1
[ 233.487397] SendAndesAFH: -->
[ 233.487398] SendAndesAFH: LinkStatus = 1, BW = 1, Channel = 1, BssHashID = 1, PktLength = 20
[ 233.487399] AsicSendCmdToAndes not need Rsp!!!
[ 233.487400] CmdUnit->u.ANDES.CmdPayload: ffff88031db03614, len = 20
[ 233.487401] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 233.487406] 0x0010 : 01 00 00 00
[ 233.487408] AsicSendCmdToAndes: ffff8800b61cc7c0, len = 24
[ 233.487409] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 233.487414] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.487417] Buf: ffff8800b61cc7c0, len = 24
[ 233.487418] 0x0000 : 14 00 10 51 03 00 00 00 01 00 00 00 01 00 00 00
[ 233.487423] 0x0010 : 01 00 00 00 01 00 00 00
[ 233.487426] pPacket->data: ffff88030dc80f00, len = 20
[ 233.487427] 0x0000 : 03 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
[ 233.487432] 0x0010 : 01 00 00 00
[ 233.487434] PCIKickOutCmd (TxCpuIdx = 11)
[ 233.487435] SendAndesAFH: <--
[ 233.487443] ==>INT_SOURCE_CSR_7630_HCCA_DMA_DONE
[ 233.492487] wlp2s0f0: associated
[ 233.492572] cfg80211: Calling CRDA for country: BY
[ 233.494192] cfg80211: Regulatory domain changed to country: BY
[ 233.494194] cfg80211: DFS Master region: ETSI
[ 233.494196] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 233.494197] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 233.494199] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 233.494200] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 233.494201] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 233.578496] wlp2s0f0: Limiting TX power to 4 dBm as advertised by 34:db:fd:0a:85:82
Hi, I've got the same laptop (Asus TP300LA) with the same wifi adapter (MT7630E) and the same problem. Wifi works properly after driver installation but when you install security updates you come back to the begining and wifi disappears. I've tried on ubuntu 14.04 and 15.04 and the situation is even worse on 15.04 because it hangs if you try to enable wifi. Thanks!
Hi whenever Linux updates. The kernel is being recompiled and rebuilt leaving the drivers we added out. This drivers needs to be put into the Linux kernel repository. We can create a bug report for this on Ubuntu website. Meanwhile I'll try to make a ppa for this as a temp solution for this as it is quite annoying.
The main conclusion I've made working with ASUS notebooks is: don't buy ASUS if you want to use Linux. They're uses hardware with ugly support in Linux. And ASUS care in the least about Linux users.
I 100% agree!!!
@shadow-identity @rajat-arora, the main problem is the card itself, it sucks also under windows 8... I've bought my asus laptop about april 2015... and despit it's was the latest revision, it suck even in BG... Any others cards, laptops and devices in my home is working in AC/N... that card is soooo lame that whenever I was about 2 meter from the router, I've got a poor signal level... until I change the card within the laptop by a 10€ Intel wifi AC card... and yes I've got a full power wifi under BG and AC) and top of it... she rocks under linux or Windows... That 10€ saves the laptop...
[edit] typo [/edit]
@saintfrater I totally agree with you. In Linux it works without interruption, but in windows frequent disconnect occurs. And the hot-spot is not stable at all either in Linux or windows. The card really sucks.
Not only the card sucks. So does the hybrid graphics. At times the laptop sometimes reaches 100_c/212_f and shuts down cause linux cannot probe the cpu/graphics fan. I had to tell linux to limit the cpu usage so the temp would stay around 50-70*c (╬ ಠ益ಠ). I think I'm going to dump the laptop and get a Macbook
Hi! I've Asus TP300LD-C4048H. It have network controller mediatek corp. MT7630e 802.11bgn inside. And no ethernet adapters :( I've installed Fedora 22 and compiled your master. I can connect to the internet, but after few seconds all system totally hangs. Only powering off can do anything. So I haven't any possibilities to connect notebook to the internet :(
In the console I can see: Looks like usual journal haven't any records about that issue. Kernel version is 4.0.4-301, x86_64
What can I do to help you debug and fix this bug?