Closed tpazderka closed 1 year ago
I have the same problem. Do you have solution?
Lukas
Try to enable debug mode: https://github.com/kukulich/home-assistant-jablotron100#debugging
I need remove integration always after remove cable and again connect.
@lukinno1 It should not be necessary. Only HaOS restart should be enough.
I had a JA unit configured (JA-106K) and after HA restart, the system decided to give it a different device address (from
hidraw0
tohidraw1
) and the web interface was not starting at all. The uwsgi requests were timing out. Nothing suspicious in the logs.