search

kukulich / home-assistant-jablotron100

Home Assistant custom component for JABLOTRON 100+ alarm system
MIT License
67 stars 24 forks source link

No sensor updates after 12 hours #43

Closed TonKro closed 2 years ago

TonKro commented 2 years ago

Initially it looks everything is working fine (all sensors are being updated) but after about12 hours it does stop updating any sensor.

Using latest Firmware version of JA100.

I also use a JA-121T, RS485 converter. This one always does work fine and keeps updating evertything.

Is there a certain setting in F-link or in the integration? Or what is the best way to debug this?

In F-link it looks like information is be deliverd via the USB port:

image image

Logger: custom_components.jablotron100 Source: custom_components/jablotron100/jablotron.py:1049 Integration: Jablotron 100 (documentation, issues) First occurred: 12:55:42 (22 occurrences) Last logged: 15:48:37

Write error: [Errno 110] Operation timed out

kukulich commented 2 years ago

It looks there’s a problem between your Jablotron and HA.

TonKro commented 2 years ago

Can you help what to do? You mean the USB cable or?

TonKro commented 2 years ago

Now running on RPI4 port USB3. Tried USB 2.0 hub but same problem.

TonKro commented 2 years ago

Did make an automation for setting a PG output every minute. This one keeps working fine but the JA-PIR update stops gving the timed out message. Any help?

TonKro commented 2 years ago

Issue solved. Problem was a configuration setting in the Rasperry PI4 in the boot config.txt