search

kumabot / test

0 stars 0 forks source link

test #1

Open kumabot opened 9 years ago

kumabot commented 9 years ago

Roses are red Violets are blue

aaaa jdoe@example.com aaaa

kumabot commented 9 years ago

baaa @jdoe aaa a a asdf@jdoe aaaa jdoe@example.com aaaaa
tests @alibaba afgfgda @jdoe a a a aaaaaa aa

kumabot commented 9 years ago

baaa @jdoe aaa a a asdf@jdoe aaaa jdoe@example.com aaaaa tests @alibaba afgfgda @jdoe a a a aaaaaa aa

kumabot commented 9 years ago

baaa @jdoe aaa a a asdf@jdoe aaaa jdoe@example.com aaaaa
tests @alibaba afgfgda @jdoe a a a aaaaaa aa

kumabot commented 9 years ago

Roses are red Violets are blue

kumabot commented 9 years ago
  1. Clone the repository
git clone git@example.com:project-name.git
  1. Create a branch for your feature
git checkout -b [feature-name]
  1. Write code. Add and Commit changes
kumabot commented 9 years ago

The only restrictions are that block-level HTML elements -- e.g. <div>, **<table>**, <pre>, <p>, etc.

kumabot commented 9 years ago

The only restrictions are that block-level HTML elements -- e.g. <div>, <table>, <pre>, <p>, etc....

The only restrictions are that block-level HTML elements -- e.g. <div>, <table>, <pre>, <p>, etc....

The only restrictions are that block-level HTML elements -- e.g. `

`,
``, `
`, `
`, etc....

The only restrictions are that block-level HTML elements -- e.g. `
`,
`
`, `
`, `
`, etc....

The only restrictions are that block-level HTML elements -- e.g. `
`,
`
`, `
`, `
`, etc....

The only restrictions are that block-level HTML elements -- e.g. `
`,
`
`, `
`, `
`, etc....

```
The only restrictions are that block-level HTML elements -- e.g. `
`,
`
`, `
`, `
`, etc....
```

This _is line one
this is **line two
this is line three**
this is line_ four

5This is line one_
This_ is line two            
        
            

            

                kumabot
                commented
                 9 years ago            

            

                




This is line one
This is line two
header 1
header 2
header 3
header4






cell 1
cell 2
cell 3
cell4




cell 5
cell 6
cell7
cell8






This is line three
This is line four


This is ~~line one
This is~~ line two


    

  1. zero
    2. 

  2. one

      

    1. two
      2. 

    3. 



This is line one
This is line two
This is line one
This is line two


1This is line one
This is line two


2This is line one
This is line two


3This is line one
This is line two


4This is line one
This is line two


5This is line one
This is line two


6This is line one
This\ is line two


7This is line one
This is line two


8This is line one
This is line two


9This is _line one
_This is line two


10This is line one
This is line two


11This is line one
This is line two


12This is line one*
This* is line two
kumabot commented 9 years ago

Download

Markdown 1.0.1 (18 KB) -- 17 Dec 2004

Introduction

Markdown is a text-to-HTML conversion tool for web writers. Markdown allows you to write using an easy-to-read, easy-to-write plain text format, then convert it to structurally valid XHTML (or HTML).

Thus, "Markdown" is two things: (1) a plain text formatting syntax; and (2) a software tool, written in Perl, that converts the plain text formatting to HTML. See the Syntax page for details pertaining to Markdown's formatting syntax. You can try it out, right now, using the online Dingus.

The overriding design goal for Markdown's formatting syntax is to make it as readable as possible. The idea is that a Markdown-formatted document should be publishable as-is, as plain text, without looking like it's been marked up with tags or formatting instructions. While Markdown's syntax has been influenced by several existing text-to-HTML filters, the single biggest source of inspiration for Markdown's syntax is the format of plain text email.

The best way to get a feel for Markdown's formatting syntax is simply to look at a Markdown-formatted document. For example, you can view the Markdown source for the article text on this page here: http://daringfireball.net/projects/markdown/index.text

(You can use this '.text' suffix trick to view the Markdown source for the content of each of the pages in this section, e.g. the Syntax and License pages.)

Markdown is free software, available under a BSD-style open source license. See the License page for more information.

Discussion List

I've set up a public mailing list for discussion about Markdown. Any topic related to Markdown -- both its formatting syntax and its software -- is fair game for discussion. Anyone who is interested is welcome to join.

It's my hope that the mailing list will lead to good ideas for future improvements to Markdown.

Installation and Requirements

Markdown requires Perl 5.6.0 or later. Welcome to the 21st Century. Markdown also requires the standard Perl library module Digest::MD5, which is probably already installed on your server.

Movable Type

Markdown works with Movable Type version 2.6 or later (including Movable Type 3.0).

  1. Copy the "Markdown.pl" file into your Movable Type "plugins" directory. The "plugins" directory should be in the same directory as "mt.cgi"; if the "plugins" directory doesn't already exist, use your FTP program to create it. Your installation should look like this:

    (mt home)/plugins/Markdown.pl

  2. Once installed, Markdown will appear as an option in Movable Type's Text Formatting pop-up menu. This is selectable on a per-post basis:

    Screenshot of Movable Type 'Text Formatting' Menu

    Markdown translates your posts to HTML when you publish; the posts themselves are stored in your MT database in Markdown format.

  3. If you also install SmartyPants 1.5 (or later), Markdown will offer a second text formatting option: "Markdown With SmartyPants". This option is the same as the regular "Markdown" formatter, except that it automatically uses SmartyPants to create typographically correct curly quotes, em-dashes, and ellipses. See the SmartyPants web page for more information.
  4. To make Markdown (or "Markdown With SmartyPants") your default text formatting option for new posts, go to Weblog Config: Preferences.

Note that by default, Markdown produces XHTML output. To configure Markdown to produce HTML 4 output, see "Configuration", below.

Blosxom

Markdown works with Blosxom version 2.0 or later.

  1. Rename the "Markdown.pl" plug-in to "Markdown" (case is important). Movable Type requires plug-ins to have a ".pl" extension; Blosxom forbids it.
  2. Copy the "Markdown" plug-in file to your Blosxom plug-ins folder. If you're not sure where your Blosxom plug-ins folder is, see the Blosxom documentation for information.
  3. That's it. The entries in your weblog will now automatically be processed by Markdown.
  4. If you'd like to apply Markdown formatting only to certain posts, rather than all of them, Markdown can optionally be used in conjunction with Blosxom's Meta plug-in. First, install the Meta plug-in. Next, open the Markdown plug-in file in a text editor, and set the configuration variable $g_blosxom_use_meta to 1. Then, simply include a "meta-markup: Markdown" header line at the top of each post you compose using Markdown.

BBEdit

Markdown works with BBEdit 6.1 or later on Mac OS X. It also works with BBEdit 5.1 or later and MacPerl 5.6.1 on Mac OS 8.6 or later. If you're running Mac OS X 10.2 (Jaguar), you may need to install the Perl module Digest::MD5 from CPAN; Digest::MD5 comes pre-installed on Mac OS X 10.3 (Panther).

  1. Copy the "Markdown.pl" file to appropriate filters folder in your "BBEdit Support" folder. On Mac OS X, this should be:

    BBEdit Support/Unix Support/Unix Filters/

    See the BBEdit documentation for more details on the location of these folders.

    You can rename "Markdown.pl" to whatever you wish.

  2. That's it. To use Markdown, select some text in a BBEdit document, then choose Markdown from the Filters sub-menu in the "#!" menu, or the Filters floating palette

Configuration

By default, Markdown produces XHTML output for tags with empty elements. E.g.:

<br />

Markdown can be configured to produce HTML-style tags; e.g.:

<br>

Movable Type

You need to use a special MTMarkdownOptions container tag in each Movable Type template where you want HTML 4-style output:

<MTMarkdownOptions output='html4'>
    ... put your entry content here ...
</MTMarkdownOptions>

The easiest way to use MTMarkdownOptions is probably to put the opening tag right after your <body> tag, and the closing tag right before </body>.

To suppress Markdown processing in a particular template, i.e. to publish the raw Markdown-formatted text without translation into (X)HTML, set the output attribute to 'raw':

<MTMarkdownOptions output='raw'>
    ... put your entry content here ...
</MTMarkdownOptions>

Command-Line

Use the --html4tags command-line switch to produce HTML output from a Unix-style command line. E.g.:

% perl Markdown.pl --html4tags foo.text

Type perldoc Markdown.pl, or read the POD documentation within the Markdown.pl source code for more information.

Acknowledgements

Aaron Swartz deserves a tremendous amount of credit for his feedback on the design of Markdown's formatting syntax. Markdown is much better thanks to Aaron's ideas, feedback, and testing. Also, Aaron's html2text is a very handy (and free) utility for turning HTML into Markdown-formatted plain text.

Nathaniel Irons, Dan Benjamin, Daniel Bogan, and Jason Perkins also deserve thanks for their feedback.

Michel Fortin has ported Markdown to PHP; it's a splendid port, and highly recommended for anyone looking for a PHP implementation of Markdown.

kumabot commented 9 years ago

BBEdit

Markdown works with BBEdit 6.1 or later on Mac OS X. It also works with BBEdit 5.1 or later and MacPerl 5.6.1 on Mac OS 8.6 or later. If you're running Mac OS X 10.2 (Jaguar), you may need to install the Perl module [Digest::MD5] [md5] from CPAN; Digest::MD5 comes pre-installed on Mac OS X 10.3 (Panther).

  1. Copy the "Markdown.pl" file to appropriate filters folder in your "BBEdit Support" folder. On Mac OS X, this should be:

    BBEdit Support/Unix Support/Unix Filters/

    See the BBEdit documentation for more details on the location of these folders.

    You can rename "Markdown.pl" to whatever you wish.

  2. That's it. To use Markdown, select some text in a BBEdit document, then choose Markdown from the Filters sub-menu in the "#!" menu, or the Filters floating palette
  3. Copy the "Markdown.pl" file to appropriate filters folder in your "BBEdit Support" folder. On Mac OS X, this should be:
BBEdit Support/Unix Support/Unix Filters/
See the BBEdit documentation for more details on the location of
these folders.

You can rename "Markdown.pl" to whatever you wish.
  1. That's it. To use Markdown, select some text in a BBEdit document, then choose Markdown from the Filters sub-menu in the "#!" menu, or the Filters floating palette
kumabot commented 9 years ago

The JSHint Team

JSHint is maintained by Rick Waldron, Caitlin Potter, Mike Sherov, and Mike Pennisi.