kunlunh / mentohust-wrt

Automatically exported from code.google.com/p/mentohust-wrt
0 stars 0 forks source link

求教,mentohust找不到服务器,Broadcom BCM5352芯片。 #25

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
ifconfig信息如下:
root@TokyoHot:~# ifconfig
br0       Link encap:Ethernet  HWaddr 00:16:01:0E:18:4A  
          inet addr:192.168.2.1  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:546 errors:0 dropped:0 overruns:0 frame:0
          TX packets:334 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:320893 (313.3 KiB)  TX bytes:27914 (27.2 KiB)

br0:0     Link encap:Ethernet  HWaddr 00:16:01:0E:18:4A  
          inet addr:169.254.255.1  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1

eth0      Link encap:Ethernet  HWaddr 00:16:01:0E:18:4A  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:91 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:19991 (19.5 KiB)
          Interrupt:4 

eth1      Link encap:Ethernet  HWaddr 00:16:01:0E:18:4C  
          inet addr:115.156.219.131  Bcast:115.156.219.191  Mask:255.255.255.192
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:689 errors:0 dropped:0 overruns:0 frame:246688
          TX packets:431 errors:15 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:342189 (334.1 KiB)  TX bytes:50389 (49.2 KiB)
          Interrupt:2 Base address:0x5000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:21 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1774 (1.7 KiB)  TX bytes:1774 (1.7 KiB)

vlan0     Link encap:Ethernet  HWaddr 00:16:01:0E:18:4A  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:91 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:19361 (18.9 KiB)

vlan1     Link encap:Ethernet  HWaddr 00:16:01:0E:18:4A  
          UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wl0.1     Link encap:Ethernet  HWaddr 02:16:01:0E:18:4D  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

我的静态IP是115.156.219.131,所以要用eth1拨号,怕有bug用了-a1��
�数,命令如下:
./mentohust -uxxxxxx -pxxxxx -neth1 -i115.156.219.131 -m255.255.255.192 
-g115.156.219.190 -a1

然后……不死路由器卡死了就是无法找到认证服务器,这该��
�何解啊?

Original issue reported on code.google.com by SunBia...@gmail.com on 22 Feb 2012 at 9:03

GoogleCodeExporter commented 8 years ago
奇怪了 博通芯片的外网一般都是vlan的啊

Original comment by q741...@gmail.com on 23 Feb 2012 at 5:41

GoogleCodeExporter commented 8 years ago
是啊,很奇怪,我的静态IP就是在WAN设置那里设置的,查看wan
状态的时候路由器也是显示指派到vLAN了,但是ifconfig却显示��
�不正常。另外我换端口vLAN拨号照样失败。

Original comment by SunBia...@gmail.com on 24 Feb 2012 at 2:54

GoogleCodeExporter commented 8 years ago
是不是WAN口连接类型没有指定成“自动配置—DHCP”

Original comment by zf19871...@gmail.com on 24 Feb 2012 at 7:24

GoogleCodeExporter commented 8 years ago
WAN口连接类型确实没有指定成“自动配置—DHCP”,而是使用�
��静态IP。因为网络中心分配给我们的都是静态IP。
这里设置静态IP不行吗?

Original comment by SunBia...@gmail.com on 24 Feb 2012 at 10:00

GoogleCodeExporter commented 8 years ago
很奇怪了,这个问题我也没法解决

Original comment by q741...@gmail.com on 24 Feb 2012 at 11:18

GoogleCodeExporter commented 8 years ago
如果网络中心分配的是固定IP的话,我是不是要在WAN口设置里
边设置好静态IP啊?

Original comment by SunBia...@gmail.com on 25 Feb 2012 at 11:10

GoogleCodeExporter commented 8 years ago
你试试自动配置DHCP后 Mentohust加+ip参数拨号试试。

Original comment by zf19871...@gmail.com on 26 Feb 2012 at 3:22

GoogleCodeExporter commented 8 years ago
是的 静态IP需要设置wan口为静态

Original comment by q741...@gmail.com on 26 Feb 2012 at 3:07