Closed fjansari0201 closed 8 years ago
hello, i have a same problem !! help us !
Error using mex
calibrateCamera.cpp
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(64) : error C2039: 'CALIB_TILTED_MODEL'ÿ: n'est pas membre de
'cv'
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(64) : error C2065: 'CALIB_TILTED_MODEL'ÿ: identificateur non
d‚clar‚
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(66) : error C2039: 'CALIB_FIX_TAUX_TAUY'ÿ: n'est pas membre de
'cv'
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(66) : error C2065: 'CALIB_FIX_TAUX_TAUY'ÿ: identificateur non
d‚clar‚
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(68) : error C2039: 'CALIB_USE_LU'ÿ: n'est pas membre de 'cv'
C:\mexopencv-master\mexopencv-master\src\+cv\calibrateCamera.cpp(68) : error C2065: 'CALIB_USE_LU'ÿ: identificateur non d‚clar‚
@bkakcha
You are probably using the wrong version.. The master
branch of mexopencv targets the latest OpenCV 3.1.0. If you're using older OpenCV versions, you must check out the corresponding mexopencv branch: https://github.com/kyamagu/mexopencv/branches
@amroamroamro thank you very much, it's work . do you have any idea of sterioscopic vision with raspberry pi 2 ??
@bkakcha No, never worked with Raspberry Pi.
The following errror comes when I run the make command. I have matlab 2013a, opencv 3.0 and visual studio12. Matlab and opecv are installed in C folder where as visual studio is installed in C:\programes