I've noticed lately that the sniffer stops working after running for a while.
It'll still respond over the network and I can in theory update it, etc. But when I connect into it, the logs show the PM2.5 is reporting with 0 constantly:
[10:11:13][W][component:214]: Component display took a long time for an operation (0.09 s).
[10:11:13][W][component:215]: Components should block for at most 20-30ms.
[10:11:13][D][pmsx003:236]: Got PM1.0 Concentration: 0 µg/m^3, PM2.5 Concentration 0 µg/m^3, PM10.0 Concentration: 0 µg/m^3
[10:11:14][W][component:214]: Component display took a long time for an operation (0.09 s).
[10:11:14][W][component:215]: Components should block for at most 20-30ms.
[10:11:14][D][pmsx003:236]: Got PM1.0 Concentration: 0 µg/m^3, PM2.5 Concentration 0 µg/m^3, PM10.0 Concentration: 0 µg/m^3
[10:11:15][D][pmsx003:236]: Got PM1.0 Concentration: 0 µg/m^3, PM2.5 Concentration 0 µg/m^3, PM10.0 Concentration: 0 µg/m^3
In Home Assistant I can see the temperature among other stats (pressure, wifi signal, etc.) are still updating... it's just the PM/AQI stuff that goes to 0 and then stays there:
If I physically reboot the device, AQI starts showing again. But after a day or so, it'll eventually go back to 0 and stay there. Any idea what could be going on?
I've noticed lately that the sniffer stops working after running for a while.
It'll still respond over the network and I can in theory update it, etc. But when I connect into it, the logs show the PM2.5 is reporting with 0 constantly:
In Home Assistant I can see the temperature among other stats (pressure, wifi signal, etc.) are still updating... it's just the PM/AQI stuff that goes to 0 and then stays there:
If I physically reboot the device, AQI starts showing again. But after a day or so, it'll eventually go back to 0 and stay there. Any idea what could be going on?
Thank you.