labradore / unojoy

Automatically exported from code.google.com/p/unojoy
0 stars 0 forks source link

The proccesing sketch showing error "ControlP5 controlP5; cannot find class or type named #8

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1. run the UnoJoyProcessingVisualizer sketch
2.
3.

What is the expected output? What do you see instead?
i see nothing !

What version of the product are you using? On what operating system?
proccessing 2.0b7

Please provide any additional information below.
dude what the F

Original issue reported on code.google.com by richardj...@eircom.net on 21 Feb 2013 at 8:19

Attachments:

GoogleCodeExporter commented 8 years ago
Thanks for catching this. Some new library code didn't manage to make it into 
the .zip collation scripts I've got, so that's the issue. If you could test out 
the new downloads, that'd be awesome.
Thanks!

Original comment by alan.chatham@gmail.com on 22 Feb 2013 at 7:45

GoogleCodeExporter commented 8 years ago

Original comment by alan.chatham@gmail.com on 22 Feb 2013 at 7:46

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
I tested it and then the processing sketch showings a different error "serial 
does not run in 64 bit mode"!  I have a 64 bit O/S but I you must use the 32 
bit version of processing.  I can see the controller now in processing and the 
buttons light up when I ground the pins on the arduino, but you must remember 
to change the comport to the one your using on your arduino.

P.S. You should google "bare paint" hell of a lot more conductive than a 
pencil.  "Bare Paint is a multi purpose electrically conductive paint"

Original comment by richardj...@eircom.net on 25 Feb 2013 at 7:44