What for BOARD_TAG & BOARD_SUB?

jej commented 8 years ago

Hi, I had some troubles to set up BOARD_TAG & BOARD_SUB in the Makefile. May I suggest to improve INSTALL.md? Here is what I did to set up the good values:

Open the BOARDS_TXT file (for example /Users/me/Applications/Arduino.app/Contents/Java/hardware/arduino/avr/boards.txt) as specified when 'make' is launched.
Find for the board used (for example "Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328")
Look at the config keys for this board (in this case "pro.menu.cpu.8MHzatmega328=ATmega...")
So BOARD_TAG=pro and BOARD_SUB=8MHzatmega328.

make & enjoy :) Hope it helps...

ladislas commented 8 years ago

Hi @jej -- thank you for your contribution.

can you make a pull request? also, it might be good in the instruction to say that BOARD_SUB is only used in the most recent versions of the IDE. and not in 1.0.x

thanks!

jej commented 8 years ago

Ok! I will do it soon. J.

ladislas commented 8 years ago

fixed by #23

jej commented 8 years ago

Need to update the TOC, but I guess I cannot do it myself... J.

ladislas commented 8 years ago

just did it :)

jej commented 8 years ago

well done then! thanks.

ladislas / Bare-Arduino-Project

What for BOARD_TAG & BOARD_SUB? #22