Closed MaxBaex closed 1 year ago
Design and implement the firmware for the ESP32 communication module.
Decide for Wifi or Bluetooth as the used wireless communication interface
Provide a configuration option for a unique Bluetooth / Wifi name, baudrates.
All data received on U1 (from the STM32) shall be transmitted parallel via Wifi and U2 (RS232 converter)
Idea: There could be a bridge between the RJ45(RS232) and the Wifi/BT interface. E.g. to bridge data from a Flarm to a connected smartphone.
Later and ambitious: The STM32 could be flashed from the ESP32 via UART.
https://github.com/larus-breeze/hw_sensor/blob/master/design/uart_bluetooth_rs232_wiring_concept.png
https://github.com/larus-breeze/hw_sensor/blob/master/media/v2.0_schematic.pdf
basic implementation finished. Open points in issue #13
Design and implement the firmware for the ESP32 communication module.
Decide for Wifi or Bluetooth as the used wireless communication interface
Provide a configuration option for a unique Bluetooth / Wifi name, baudrates.
All data received on U1 (from the STM32) shall be transmitted parallel via Wifi and U2 (RS232 converter)
Idea: There could be a bridge between the RJ45(RS232) and the Wifi/BT interface. E.g. to bridge data from a Flarm to a connected smartphone.
Later and ambitious: The STM32 could be flashed from the ESP32 via UART.
https://github.com/larus-breeze/hw_sensor/blob/master/design/uart_bluetooth_rs232_wiring_concept.png
https://github.com/larus-breeze/hw_sensor/blob/master/media/v2.0_schematic.pdf