search

lausser / check_nwc_health

nwc = network component. This plugin checks lots of aspects of routers, switches, wlan controllers, firewalls,.....
http://labs.consol.de/nagios/check_nwc_health
GNU General Public License v2.0
150 stars 87 forks source link

Nortel 4548GT-PWR with failed fan not displayed #85

Closed trentasis closed 8 years ago

trentasis commented 8 years ago

Hi,

I have a Nortel 4548GT-PWR that is showing a fan 3 in failed state, with cli, running "show envir" appears as failed

Running hardware-health mode appear all OK, and output in debug mode is:

./check_nwc_health --hostname 192.168.170.107 --community public --mode hardware-health -v I am a Ethernet Routing Switch 4548GT-PWR HW:06 FW:5.3.0.3 SW:v5.3.2.007 BN:07 (c) Nortel Networks OK - environmental hardware working fine component 3.10.0/48 ports 10/100/1000 BaseT with PoE and 4 shared SFP ports status is normal (admin enable) component 3.10.1/ status is removed (admin enable) component 3.10.2/ status is removed (admin enable) component 3.10.3/SX GBIC status is normal (admin enable) component 3.10.4/SX GBIC status is normal (admin enable) component 3.10.5/ status is normal (admin enable) component 4.10.0/Primary Power Supply status is normal (admin enable) component 4.11.0/Redundant Power Supply status is removed (admin enable) component 5.10.0/Temperature Sensor status is normal (admin enable) component 6.10.0/Internal Fan 1 status is normal (admin enable) component 6.11.0/Internal Fan 2 status is normal (admin enable) component 6.12.0/Internal Fan 3 status is warning (admin enable) component 6.13.0/Internal Fan 4 status is normal (admin enable) component 8.1.0/48 ports 10/100/1000 BaseT with PoE and 4 shared SFP ports status is normal (admin enable)

and 6.12 (failed fan) [COMP_6.12.0] s5ChasComAdminState: enable s5ChasComBaseNumPorts: 0 s5ChasComDescr: Internal Fan 3 s5ChasComGroupMap: 0 s5ChasComGrpIndx: 6 s5ChasComIndx: 12 s5ChasComIpAddress: 0.0.0.0 s5ChasComLocation: s5ChasComLstChng: 0 s5ChasComMaxSubs: 0 s5ChasComNumSubs: 0 s5ChasComOperState: warning s5ChasComRelPos: 0 s5ChasComSerNum: s5ChasComShortDescr: Internal Fan 3 s5ChasComSubIndx: 0 s5ChasComTotalNumPorts: 0 s5ChasComType: 1.3.6.1.4.1.45.1.6.1.3.10.91.1 s5ChasComVer: info: component 6.12.0/Internal Fan 3 status is warning (admin enable)

Why is shown OK when a warning is showed in debug mode? How can I solve this?

Thanks

lausser commented 8 years ago

Please send me an snmpwalk

trentasis commented 8 years ago

Sended by private mail snmpwalk

lausser commented 8 years ago

good catch. It was a copy&paste-error. Now you get: WARNING - component 6.12.0/Internal Fan 3 status is warning (admin enable) https://labs.consol.de/nagios/check_nwc_health/index.html with the download link should be updated in a few minutes.

trentasis commented 8 years ago

Thanks and great job!!