[Screenshots] Container Network Interface (CNI) under 'How it Works See It in Action' section

saurabh100ni commented 8 months ago

Current Behavior

Currently, every integration has only two old screenshots of the designer and visualizer in the 'How it Works See It in Action' section.

Desired Behavior

Add new images and videos from the latest version of the software (MeshMap)
Add screenshots for Container Network Interface (CNI) integration.

Acceptance Tests

Ensure your screenshot represents the use of a few specific integrations.
The screenshot from the Designer mode should contain a valid design, refer to meshery catalog to use and view published designs.
Add both Dark Mode and Light Mode screenshots.
The screenshot should not be a snippet, take the full screenshot of your browser.
Use Incognito mode on Chrome browser, to ensure your bookmark bar or any other items are not shown in the screenshot/video.

Contributor Resources and Handbook

The layer5.io website uses Gatsby, React, and GitHub Pages. Site content is found under the master branch.

📚 See contributing instructions.
🎨 Wireframes and designs for Layer5 site in Figma (open invite)
🙋🏾🙋🏼 Questions: Discussion Forum and Community Slack.

Join the Layer5 Community by submitting your community member form.

SagarSingh2003 commented 8 months ago

I am a beginner , but I would like to work on this issue! , may I?

saurabh100ni commented 8 months ago

Sure thing Sagar, Welcome to the community 😎🚀 Ps: you can explore similar PRs for reference.

SagarSingh2003 commented 8 months ago

Sure thing Sagar, Welcome to the community 😎🚀 Ps: you can explore similar PRs for reference.

thank you @saurabh100ni , for welcoming me and being so kind !

I have set up meshery on my local env , but i am not getting access to the playground!!

can you please tell me if I am doing something wrong? and what i should do next?

saurabh100ni commented 8 months ago

@Chadha93 can we take care of access?

SagarSingh2003 commented 8 months ago

@Chadha93 can we take care of access?

thank you @saurabh100ni , i've got the access of playground , but i am not able to understand meshmap at all 😔 !! What should I do? can you provide me some resources to learn about it ?

abhijeetgauravm commented 8 months ago

@Chadha93 can we take care of access?

thank you @saurabh100ni , i've got the access of playground , but i am not able to understand meshmap at all 😔 !! What should I do? can you provide me some resources to learn about it ?

hey @SagarSingh2003 u can go through this docs for better understanding of meshmap.

SagarSingh2003 commented 8 months ago

@abhijeetgauravm @saurabh100ni i read the docs and have understood how meshmap works , but due to lack of knowledge on CNI and Kubernetes , I am not able to do the design part , do you have something that I can take reference from ?

Harsha-10 commented 8 months ago

will this pull request get merged as this is labelled with hacktoberfest?

saurabh100ni commented 8 months ago

After the review, they do get merged @Harsha-10

Harsha-10 commented 8 months ago

Okay, thanks for the info

saurabh100ni commented 8 months ago

@SagarSingh2003 there are many issues open under Hacktoberfest or you can also take good first issues, see you there 😉

Harsha-10 commented 8 months ago

Yeah sure 😄

SagarSingh2003 commented 8 months ago

@SagarSingh2003 there are many issues open under Hacktoberfest or you can also take good first issues, see you there 😉

thank you @saurabh100ni, i will try to look into other issues then , i've unassigned myself from this one

saurabh100ni commented 8 months ago

Alright @SagarSingh2003 ^^ @Harsha-10 would you wanna work on this issue?

Harsha-10 commented 8 months ago

I have a small doubt on these issues

Harsha-10 commented 8 months ago

Do I need to attach the screenshot of actual design integration or can I use some random design in meshery and attach the screenshot?

Harsha-10 commented 8 months ago

Like I have checked 2 similar issues and both have same screenshots of a single design

saurabh100ni commented 8 months ago

This post on our discuss forum may help you.

Harsha-10 commented 8 months ago

okay,But i don't know how to make designs using the integration....

sandramsc commented 7 months ago

Hi @Harsha-10, in addition to what @saurabh100ni has already stated, consider reading this message on Slack. I also propose the conversation continues on Slack, to potentially get assistance from the wider community as well as to reduce notifications for maintainers on here, so they can focus on more essential tasks. Any further clarifying questions, please feel free to ask.

Harsha-10 commented 7 months ago

Yeah, i can understand. I have got an overview after checking the post, thanks for the support @saurabh100ni @sandramsc

abhijeetgauravm commented 7 months ago

okay,But i don't know how to make designs using the integration....

@Harsha-10 regarding design you don't need to create your own, you can use published design and clone them and take screenshot of them (You can do that in meshmap)

Harsha-10 commented 7 months ago

Yeah got it thanks @abhijeetgauravm

sandramsc commented 6 months ago

Hi, @Harsha-10 how are you getting along with the solution? Let us know if there is an update on progress and remember to utilize the discussion forum might you have any clarifying questions.

Harsha-10 commented 6 months ago

@sandramsc I'm not working on the issue, just got the info then and worked on similar issues and i have not been assigned

sandramsc commented 6 months ago

@sandramsc I'm not working on the issue, just got the info then and worked on similar issues and I have not been assigned

@Harsha-10 That's right, double checked, let us know if the information provided was helpful in getting you started with the solution for the similar issue and consider tagging this issue for context might you have any further questions.

Harsha-10 commented 6 months ago

Yeah, later i was unable to figure out my other issue so I have unassigned me.

ruthwikchikoti commented 3 months ago

hey @sandramsc can you assign me this issue .

narasimha-1511 commented 3 months ago

here you go @ruthwikchikoti 🚀

layer5io / layer5