layoutdesign / iphonebrowser

Automatically exported from code.google.com/p/iphonebrowser
0 stars 0 forks source link

3.1.2 Jailbreak Issue #153

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1. Open iPhoneBrowser 1.9.3.0
2. iPod 2g is recognize, but says not jailbroken

What is the expected output? What do you see instead?
It is supposed to show the root folder, but instead there are only a few
folders that show up:
/Root
 - ApplicationArchives
 - DCIM
 - Downloads
 - iTunes_Control
 - Photos
 - Podcasts
 - PublicStaging
 - Purchases
 - Recordings
 - Safari

The status bar displays:
iPod 3.1.2 (iPod Touch) is connected, not jailbroken (no afc2 service found)

I cannot get to the /Library/Themes/ folder

What version of the product are you using? On what operating system?
iPod Touch 2G, 3.1.2 jailbroken firmware (blackra1n), iTunes 9.0.1.8,
iPhoneBrowser 1.9.3.0

Please provide any additional information below.

Original issue reported on code.google.com by citricfo...@gmail.com on 11 Oct 2009 at 9:23

GoogleCodeExporter commented 8 years ago
If you have used Blackra1n, please try installing the new afc2add program in 
Cydia.

Original comment by NetMage....@gmail.com on 13 Oct 2009 at 7:38

GoogleCodeExporter commented 8 years ago
I used ifile to edit the p.list. Works like a charm. 

Original comment by erni...@optimum.net on 14 Oct 2009 at 2:39

GoogleCodeExporter commented 8 years ago
Search on Cydia for an app called afc2add. This makes life a whole lot easier. 
Do your 
blackrain, Install cydia then install afc2add and your done. Would be better if 
blackrain would do it cause then it would truely be a one click process. Still 
great 
but juuuuuust shy of perfection. Hope he decides to update it to make it 
PERFECT. I 
would donate another 10.00 to him...you did donate didn't you?????

Original comment by jdsnide...@gmail.com on 14 Oct 2009 at 11:42

GoogleCodeExporter commented 8 years ago
Thanks NetMage.SCW & jdsniderjr!!!

afc2add worked perfectly and couldn't be easier! 
(just remember to reboot using blackrain...)

Original comment by upfr...@gmail.com on 15 Oct 2009 at 2:26

GoogleCodeExporter commented 8 years ago
editing the services.plist solved my issue.  FYI - I used blackrain to jb 3.1.2.

Original comment by vernon.c...@gmail.com on 15 Oct 2009 at 5:44

GoogleCodeExporter commented 8 years ago
editing the services.plist solved my issue.  FYI - I used blackrain to jb 3.1.2.

Original comment by vernon.c...@gmail.com on 15 Oct 2009 at 5:44

GoogleCodeExporter commented 8 years ago
editing the services.plist solved my issue.  

Original comment by vernon.c...@gmail.com on 15 Oct 2009 at 5:45

GoogleCodeExporter commented 8 years ago
afc2add works for me. im using 3.1.2

Original comment by amad.m...@gmail.com on 15 Oct 2009 at 8:30

GoogleCodeExporter commented 8 years ago
afc2add works for me(downloaded from Rock).Using 3.1.2 jb with blackra1n, ;).

Original comment by j.b.piag...@gmail.com on 15 Oct 2009 at 12:25

GoogleCodeExporter commented 8 years ago
work as a charm
(editing services.plist)
thank you alot!

Original comment by itta...@gmail.com on 16 Oct 2009 at 12:15

GoogleCodeExporter commented 8 years ago
iphonebrowser gives me an error

Original comment by socheath...@gmail.com on 17 Oct 2009 at 12:40

GoogleCodeExporter commented 8 years ago
Works for me with the afc2add tweak from Cydia.

Original comment by danthema...@gmail.com on 17 Oct 2009 at 2:23

GoogleCodeExporter commented 8 years ago
Excellent detailed resource page - Thanks!

As it happened, adding the afc2add tweak from Cydia worked for me as well, 
however I 
do plan to explore SSH connection to my iPod since it will be easier to work 
with 
than the local terminal.

Original comment by dallo...@gmail.com on 21 Oct 2009 at 1:01

GoogleCodeExporter commented 8 years ago
ok, WAY easier fix guys, just get the package "afc2add" from cydia, and 
iphonebrowser 
as well as winterboard and everything else works just great.

Original comment by jakobc.n...@gmail.com on 27 Oct 2009 at 2:19

GoogleCodeExporter commented 8 years ago
It's due to jailbreaking your iPhone with blackra1n as it doesn't install the 
mod so that you can see the root files. 
Install afc2add from Cydia, reboot your iphone and it should do the trick.

Original comment by ziigl...@gmail.com on 29 Oct 2009 at 1:46

GoogleCodeExporter commented 8 years ago
I used the afc2add on my 3GS with 3.1.2 after jailbreaking with blackra1n and 
it 
worked for me too.... Thanks to all for the help!!

Original comment by 08G...@gmail.com on 2 Nov 2009 at 5:30

GoogleCodeExporter commented 8 years ago
I used the afc2add on my iPod Touch 2g and it worked perfectly!!!

Original comment by expazat...@gmail.com on 4 Nov 2009 at 5:01

GoogleCodeExporter commented 8 years ago
afc2add works for me(downloaded from Cydia).3GS Using 3.1.2 jb with blackra1n, 
THANK 
YOU SO MUCH!!!!! I was freaking out because I couldn't install my 
themes...almost 
brought me to tears!

Original comment by jealous.ones.nv@gmail.com on 5 Nov 2009 at 6:04

GoogleCodeExporter commented 8 years ago
AWESOME! It works now. Used the afc2add on my 2G , 3.1.2

Original comment by beaston...@gmail.com on 5 Nov 2009 at 6:48

GoogleCodeExporter commented 8 years ago
i can now use iphoneborwser but i don't see all of my apps and games installed 
(in
iphonebrowser). HELP!!!

Original comment by eugene.h...@gmail.com on 8 Nov 2009 at 12:43

GoogleCodeExporter commented 8 years ago
BRAVO! Have used afc2add from Cydia on 3G, 3.1.2. Work perfectly! Thank you 
very 
much!

Original comment by ivonn...@gmail.com on 11 Nov 2009 at 12:45

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
Ok i keep running into major issues with my iPhone when ever i try to install 
or edit 
something. This in turn leads to me having to completely reset my phone and 
return 
everything to its factory settings. 

Phone Specs:
16GB 3GS
3.1.2 firmware with baseband 5.11.07

I can successfully install the newest blackra1n jailbreak along with the unlock 
and 
load up cydia and rock and get the updates and what not blah blah blah. Now 
when i 
download and install afc2add from cydia and install it, my iPhone reboots and 
hangs 
up and shows the USB cable and iTunes logo/CD. After waiting over 5 min, I 
restore to 
fac settings.

Same goes for when I manually edit the Services PList and loading it back to 
the 
phone with WinSCP. Same thing happens, when i reboot, it gets hung up on the 
USB 
cable and iTunes logo/CD. Oh and I even had OpenSSH installed and everything... 
What 
am I doing wrong? It seems like everyone else can get it to work but myself. I 
mean I 
am following step by step procedures and its still requiring me to reset phone 
to fac 
settings... plz help! Thx in advance.

Original comment by jerredse...@gmail.com on 11 Nov 2009 at 9:56

GoogleCodeExporter commented 8 years ago
Im uploadind this the a patched file to cydia 

Original comment by Bal...@gmail.com on 22 Nov 2009 at 2:26

GoogleCodeExporter commented 8 years ago
Hello all,

When use iphone browser, in the "goto location" go down to "Third parties apps" 
thereafter, there are no option for saving these third parties apps at all. Is 
there 
any way or option to save these third parties apps? thanks.

Original comment by kdo...@gmail.com on 23 Nov 2009 at 7:57

GoogleCodeExporter commented 8 years ago
Hi,
3G 3.1.2 (7D11) 05.11.07 no wi-fi at all the Wi-Fi si gray, reset restore did 
not 
work,. Any suggestions.

Original comment by pki...@gmail.com on 23 Nov 2009 at 10:44

GoogleCodeExporter commented 8 years ago
do you have to install openSSH before installing afc2add? my ipod touch 
restarted
after installation and got stuck in recovery mode...

Original comment by FrancisC...@gmail.com on 23 Nov 2009 at 12:39

GoogleCodeExporter commented 8 years ago
do you have to install openSSH before installing afc2add? my ipod touch 
restarted
after installation and got stuck in recovery mode...

Original comment by FrancisC...@gmail.com on 23 Nov 2009 at 12:39

GoogleCodeExporter commented 8 years ago
YOU ARE THE MAN!!!!!!
I WOULD KISS YOU ALL OVER LOL!!!

WORKS PERFECTLY! Thank you for the step by step!

Original comment by psygn0...@hotmail.com on 24 Nov 2009 at 1:00

GoogleCodeExporter commented 8 years ago
go to cydia and download afc2add and I bet your problems will go away!

Original comment by kbrowne...@gmail.com on 4 Dec 2009 at 9:01

GoogleCodeExporter commented 8 years ago
Lavarsicious@

Thank You Very Much!!
Works perfectly, step by step guide was the best out of all i have seen.
Well done!!

Original comment by nikit...@gmail.com on 13 Dec 2009 at 12:49

GoogleCodeExporter commented 8 years ago
Re: Comment 5  by lavarsicious, Oct 11, 2009
After failing to get a complete jailbrake with blackra1n, I was able to did this
(comment 5) and rebooted my iphone after confirming the update of the 
Services.plist
file.  Even after reboot iphoneexplorer still reports my phone as jailed so I 
cannot
change the root to what I want.  Also, ifunbox reports the phone as jailed. I 
know it
is not jailed because I was able to load Cydia and using that was able to load 
SSH
etc. What does all this mean?

BTW what I really want to do is use a browser to move files from GoodReaderUSB 
file
location (/private/var/mobile/Media/DCIM/GoodReaderUSB/) to GoodReader Document
location (/private/var/mobile/Applications/8A67F62C.../Documents). Anyone know 
some
other way to do that?

Original comment by flanagan...@gmail.com on 22 Dec 2009 at 11:24

GoogleCodeExporter commented 8 years ago
Well, today I found that not always SSH and blackra1n are the problem.
I have at home an old 3com 3CRWE554G72 wifi router. I have never make my Ipod 
touch
2g 3.1.2 Openssh work fine, just a few seconds. and iFile webserver doesnt work 
at all.
Reason: router. Just swap with a new Linksys and now iFile works. SSH from my 
Ubuntu
box (Asus eee 4g) refuses to connect (connection refused) but at least have some
response at all!!!
Will try with a newer Linksys model to see if the SSH issue is about the same.
Thanks all

Original comment by marcelo....@gmail.com on 23 Dec 2009 at 9:07

GoogleCodeExporter commented 8 years ago
@ #77:  FrancisChud, you have to load up itunes (at least I think it needs to 
be 
running) and connect the ipod, then run blackrain again from your PC and hit 
'make 
it rain'. Do this when the recovery mode screen (the one with the pic of the 
USB 
cable) shows up.

It'll show GeoHots face for a few seconds, then bingo, all should be working 
again. 
You can eject the Ipod and continue on your way!

Original comment by richard....@gmail.com on 26 Dec 2009 at 9:39

GoogleCodeExporter commented 8 years ago
Ok, I am in an endless loop here.

Cydia crashes when trying to run it.  I know I need to delete some files to get 
it 
running again, but I have not yet installed SSH so I cannot see the files on 
the 
phone.  iPhoneBrowser gives me an error message saying that I dont have afc2 
installed so it wont work either.

is there any way I can access my phones files without SSH or iphonebrowser??

Please help.

Original comment by chad.riv...@gmail.com on 28 Dec 2009 at 6:19

GoogleCodeExporter commented 8 years ago
@chad.rivoli

What I did for my friend's iPhone, was to install Rock, install Terminal, then
removed the files.

After that restarted Cydia and it worked fine.

To get iPhoneBrowser/Disk Aid/iPhone Explorer to show the root of the iPhone, 
you
need to modify a PLIST file else it will not show the real root ("/").

Original comment by esp...@gmail.com on 29 Dec 2009 at 1:22

GoogleCodeExporter commented 8 years ago
afc2add afc2add afc2add afc2add afc2add afc2add afc2add afc2add afc2add 
just download that on cydia 

Original comment by buddyggg...@gmail.com on 30 Dec 2009 at 10:14

GoogleCodeExporter commented 8 years ago
afc2add worked!

Original comment by thejac...@gmail.com on 31 Dec 2009 at 12:53

GoogleCodeExporter commented 8 years ago
thank you

Original comment by jessybos...@gmail.com on 3 Jan 2010 at 11:26

GoogleCodeExporter commented 8 years ago
In order to jailbreak using blackra1n, iTunes and all it's derrivatives must be 
turned off via task manager. You must also run 
blackra1n from your hard drive. 

Original comment by Superbug...@gmail.com on 5 Jan 2010 at 3:15

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
As an iPhone developer, no discussion of stealing programs please

Original comment by NetMage....@gmail.com on 8 Jan 2010 at 4:58

GoogleCodeExporter commented 8 years ago
how can get afc2add for iPhone ? I have looking through Cydia, but I count 
find. Pls tech 
me easier way. I have no Wifi connection. How can I do ?

plssssssssssssss

Original comment by wintu...@gmail.com on 18 Jan 2010 at 6:51

GoogleCodeExporter commented 8 years ago
Well I tried the services.plist edit and that didn't work unfortunately so now 
I'm 
trying afc2add. Hopefully that works ok as it is important that I be able to 
use ipb 
and NOT WinSCP.

Thanks a bunch to both though for the tips!

Original comment by Dae...@gmail.com on 22 Jan 2010 at 12:25

GoogleCodeExporter commented 8 years ago
hi im tring to downlod afc2add but it keeps saying that it cant find the link 
pls help

Original comment by birillu_...@hotmail.com on 10 Feb 2010 at 10:12

GoogleCodeExporter commented 8 years ago
This worked for me on my girlfriend's 3.1.2 3GS jailbroke using Blackra1n. 
Thanks for
the help!

Original comment by CodyHoll...@gmail.com on 16 Mar 2010 at 2:02

GoogleCodeExporter commented 8 years ago
The property list fix worked for me. On reboot ipb could browse everything 
instead of
just the media folder :P

Original comment by robotchi...@gmail.com on 4 Apr 2010 at 4:46

GoogleCodeExporter commented 8 years ago
Help please,
I just installed afc2add and now the phone will not boot. All I get is the 
apple 
icon.
16G 3gs. 3.1.2 jailbroken with Blackra1n

Original comment by fal...@gmail.com on 4 Apr 2010 at 5:44