Process is getting killed

[monupurohit]

sudo ./darknet detect cfg/yolo.cfg bin/yolo.weights data/dog.jpg layer filters size input output 0 conv 32 3 x 3 / 1 608 x 608 x 3 -> 608 x 608 x 32 1 max 2 x 2 / 2 608 x 608 x 32 -> 304 x 304 x 32 2 conv 64 3 x 3 / 1 304 x 304 x 32 -> 304 x 304 x 64 ........ 29 conv 1024 3 x 3 / 1 19 x 19 x1280 -> 19 x 19 x1024 30 conv 425 1 x 1 / 1 19 x 19 x1024 -> 19 x 19 x 425 31 detection mask_scale: Using default '1.000000' Loading weights from bin/tiny-yolo-voc.weights...Done! Killed

How to fix it ? Tried following, that too killed sudo ./darknet detect cfg/yolo.cfg bin/tiny-yolo-voc.weights data/dog.jpg

[danielawde9]

same here I started trying different cfgs until finally, this worked.

sudo ./darknet detector test cfg/coco.data cfg/yolov2.cfg yolo.weights data/dog.jpg

With output

layer filters size input output 0 conv 32 3 x 3 / 1 416 x 416 x 3 -> 416 x 416 x 32 0.299 BFLOPs 1 max 2 x 2 / 2 416 x 416 x 32 -> 208 x 208 x 32 2 conv 64 3 x 3 / 1 208 x 208 x 32 -> 208 x 208 x 64 1.595 BFLOPs 3 max 2 x 2 / 2 208 x 208 x 64 -> 104 x 104 x 64 4 conv 128 3 x 3 / 1 104 x 104 x 64 -> 104 x 104 x 128 1.595 BFLOPs 5 conv 64 1 x 1 / 1 104 x 104 x 128 -> 104 x 104 x 64 0.177 BFLOPs 6 conv 128 3 x 3 / 1 104 x 104 x 64 -> 104 x 104 x 128 1.595 BFLOPs 7 max 2 x 2 / 2 104 x 104 x 128 -> 52 x 52 x 128 8 conv 256 3 x 3 / 1 52 x 52 x 128 -> 52 x 52 x 256 1.595 BFLOPs 9 conv 128 1 x 1 / 1 52 x 52 x 256 -> 52 x 52 x 128 0.177 BFLOPs 10 conv 256 3 x 3 / 1 52 x 52 x 128 -> 52 x 52 x 256 1.595 BFLOPs 11 max 2 x 2 / 2 52 x 52 x 256 -> 26 x 26 x 256 12 conv 512 3 x 3 / 1 26 x 26 x 256 -> 26 x 26 x 512 1.595 BFLOPs 13 conv 256 1 x 1 / 1 26 x 26 x 512 -> 26 x 26 x 256 0.177 BFLOPs 14 conv 512 3 x 3 / 1 26 x 26 x 256 -> 26 x 26 x 512 1.595 BFLOPs 15 conv 256 1 x 1 / 1 26 x 26 x 512 -> 26 x 26 x 256 0.177 BFLOPs 16 conv 512 3 x 3 / 1 26 x 26 x 256 -> 26 x 26 x 512 1.595 BFLOPs 17 max 2 x 2 / 2 26 x 26 x 512 -> 13 x 13 x 512 18 conv 1024 3 x 3 / 1 13 x 13 x 512 -> 13 x 13 x1024 1.595 BFLOPs 19 conv 512 1 x 1 / 1 13 x 13 x1024 -> 13 x 13 x 512 0.177 BFLOPs 20 conv 1024 3 x 3 / 1 13 x 13 x 512 -> 13 x 13 x1024 1.595 BFLOPs 21 conv 512 1 x 1 / 1 13 x 13 x1024 -> 13 x 13 x 512 0.177 BFLOPs 22 conv 1024 3 x 3 / 1 13 x 13 x 512 -> 13 x 13 x1024 1.595 BFLOPs 23 conv 1024 3 x 3 / 1 13 x 13 x1024 -> 13 x 13 x1024 3.190 BFLOPs 24 conv 1024 3 x 3 / 1 13 x 13 x1024 -> 13 x 13 x1024 3.190 BFLOPs 25 route 16 26 conv 64 1 x 1 / 1 26 x 26 x 512 -> 26 x 26 x 64 0.044 BFLOPs 27 reorg / 2 26 x 26 x 64 -> 13 x 13 x 256 28 route 27 24 29 conv 1024 3 x 3 / 1 13 x 13 x1280 -> 13 x 13 x1024 3.987 BFLOPs 30 conv 425 1 x 1 / 1 13 x 13 x1024 -> 13 x 13 x 425 0.147 BFLOPs 31 detection mask_scale: Using default '1.000000' Loading weights from yolo.weights...Done! data/dog.jpg: Predicted in 168.301101 seconds. dog: 81% truck: 74% bicycle: 83%

I guess the rpi can't handle all the processing data from the model so you might try another model or another hardware for it

[kuriel07]

the process got killed because it uses a lot of system memory, try enable swap or use tiny cfg

[sateesh12]

the process got killed because it uses a lot of system memory, try enable swap or use tiny cfg

tiny worked with ~500MB of Swap space.