miketockhp
commented
3 years ago Issue still occurs with Tru64 5.1B-6 + NHD7 + AXPBOX 1.1.0 SCSC CD-Rom + SCSI disk works single user boot skip installation. Full Boot install fails with filesystem bug mentioned in comments.
IDE CD Rom + IDE Disk works single user boot skip installation athough you get timeouts above. Full boot fails due to timoeuts. INSTALL fails due to timeouts
SCSI CD Rom + IDE Disk system core dumps.
UPDATE: Following configuration. CDROM IDE 0.0 DISK IDE 1.0
Timeouts occur less frequently.
This issue seems to be the same as/related to #63, #8, and this very same ES40 bug from 2008, however on Tru64 this is triggered by simply trying to boot the install CD and the error is a lot more verbose. This happens even if I move the HDD or CD-ROM only over to SCSI while keeping the other drive on IDE.
Console: ide1.0 aborting on command 0xec ide1.0 aborting on command 0xc6 ide1.0 aborting on command 0xc6
Emulated serial: ata0 at pci0 slot 15 ata0: ACER M1543C cam_logger: SCSI event packet cam_logger: bus 0 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error scsi0 at ata0 slot 0 rad 0 cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error
With only an IDE hard disk, there are no console errors but boot still fails: ata0 at pci0 slot 15 ata0: ACER M1543C cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error cam_logger: SCSI event packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error
Tru64 4.0F, with both on IDE:
Console: ide1.0 aborting on command 0xec ide1.0 aborting on command 0x00
OS: ata0 at pci0 slot 15 ata0: ACER M1543C scsi0 at ata0 slot 0 rz0 at scsi0 target 0 lun 0 (LID=0) (tru6440fimg ) cam_logger: CAM_ERROR packet cam_logger: bus 1 target 0 lun 0 ss_perform_timeout timeout on request on the bus, scheduled bus reset Active CCB at time of error DDR - Warning: Device has no "name" - for Vendor ID : Product ID: Revision: ata0:0 Invalid PIO mode IDE device attached scsi1 at ata0 slot 1 (ohciconfl1) Unable to start sending SOF tokens!