README.md: Add model compatibility list

davidebeatrici commented 1 year ago

The models listed at https://github.com/odya/esphome-powmr-hybrid-inverter use the same dongle, but for some reason they are not mentioned in its page:

I'm going to add them.

davidebeatrici commented 1 year ago

The POW-HVM2.0H-12V and POW-HVM2.4H-24V seem to be discontinued, I only found an archived page for the latter.

davidebeatrici commented 1 year ago

Please note that, as I realized in odya/esphome-powmr-hybrid-inverter#9, support for the POW-HVM5.5K-48V is provided by a different dongle.

Sledje commented 9 months ago

David or Leo - I need some project help connecting my PowMr through some controller (Raspberry PI, ESP, Arduino) to an EV charger. I can pay a nominal hourly fee. Are either of you available and interested?

davidebeatrici commented 9 months ago

Could you provide us some info, such as brand and model, of the EV charger?

Sledje commented 9 months ago

Hello - I will get back to you. Thank you

On Sun, Feb 18, 2024 at 1:50 PM Davide Beatrici @.***> wrote:

Could you provide us some info, such as brand and model, of the EV charger?

— Reply to this email directly, view it on GitHub https://github.com/leodesigner/powmr_comm/pull/5#issuecomment-1951412746, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGH4UTFCGI6PNILJZDBN2H3YUJEQRAVCNFSM6AAAAAAZYMC6BGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJRGQYTENZUGY . You are receiving this because you commented.Message ID: @.***>

manfredr74 commented 9 months ago

I am using the go-e homefix charger 11kWhttps://go-e.com/en/products/go-echarger-homefixIt sends many data via MQTT and is also controllable via MQTT.Thx Manfred-- Manfred ReisnerCEO, Smart Mobility, System Safetye-mail: @.: +4368181113224ACTARON GmbHHauptstrasse 297441 PilgersdorfAustria -------- Ursprüngliche Nachricht --------Von: Davide Beatrici @.> Datum: 18.02.24 19:50 (GMT+01:00) An: leodesigner/powmr_comm @.> Cc: Subscribed @.> Betreff: Re: [leodesigner/powmr_comm] README.md: Add model compatibility list (PR #5) Could you provide us some info, such as brand and model, of the EV charger?

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

manfredr74 commented 9 months ago

Hello,well the Solarinverter does not need to communicate with the wallbox - just data exchange via MQTT would be nice.A commonly used MQTT- Broker in the smart home domain is Mosquitto.Like all smart home devices the wallbox fully supports MQTT and is also controllable.Manfred-- Manfred ReisnerCEO, Smart Mobility, System Safetye-mail: @.: +4368181113224ACTARON GmbHHauptstrasse 297441 PilgersdorfAustria -------- Ursprüngliche Nachricht --------Von: Sledje @.> Datum: 20.02.24 11:49 (GMT+01:00) An: leodesigner/powmr_comm @.> Cc: Subscribed @.> Betreff: Re: [leodesigner/powmr_comm] README.md: Add model compatibility list (PR #5) Hello - I will get back to you. Thank you

On Sun, Feb 18, 2024 at 1:50 PM Davide Beatrici @.***>

wrote:

Could you provide us some info, such as brand and model, of the EV charger?

—

Reply to this email directly, view it on GitHub

https://github.com/leodesigner/powmr_comm/pull/5#issuecomment-1951412746,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/BGH4UTFCGI6PNILJZDBN2H3YUJEQRAVCNFSM6AAAAAAZYMC6BGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJRGQYTENZUGY

.

You are receiving this because you commented.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

leodesigner / powmr_comm

README.md: Add model compatibility list #5