search

leoheck / developower-v2.0

Developower-v2.0 Board
8 stars 3 forks source link

Pinout #1

Open revenador opened 3 years ago

revenador commented 3 years ago

Seeing as this seems to be the only repository of knowledge about this board I thought I'd provide the pinout I've probed from my board. Labelled as Developower V2.0. Has a transistor output rather than a relay for the spindle output.

Stepper Drivers Enable all drivers D8

X axis Step D2 Dir D5

Y axis Step D3 Dir D6

Z axis Step D4 Dir D7

Spindle/Laser D11

Limits Each direction shares a pin for + and - X+/X- D9 Y+/Y- D10 Z+/Z- D12

Probe is on A5 on my board. Can't remember if that was stock or if I changed it

revenador commented 3 years ago

It appears this is completely stock for grbl so only useful in that it confirms the board is a stock configuration.

leoheck commented 3 years ago

Oh, haven't seen this issue before. @revenador this is my work trying to reverse engineer as much as possible this board. Have you found any issues or you were just sharing your measurements? My works is may not be complete, and my also have issues, so feel free to give your inputs. Thanks.

revenador commented 3 years ago

Just sharing my measurements. Hopefully it will save someone else some time in future. Looks like you've got a lot further along now than it was when I last commented.

leoheck commented 3 years ago

I see. Cool, thank you.