search

lersy / Dell-7577-Hackintosh-macos-Opencore

Efi folder to boot macOS Catalina on Dell Inspiron 7577 Gaming Laptop
37 stars 4 forks source link

Stuck at Apple logo with empty progress bar #22

Closed PribhuPatel closed 3 years ago

PribhuPatel commented 3 years ago

I am stuck at apple logo while clean install of MacOS Big Sur on Dell 7577. I don't know what's wrong I am doing. I am uploading my EFI here. I have also updated SMBIOS parameters in config.plist. My EFI folder is from the latest release. I am using offline installer created with macOS.

EFI.zip

lersy commented 3 years ago

Hey mate,

Can you replace your config.plist with the one provided below? It will boot in verbose mode so we can see what is wrong easier than this. Have you disabled your cfg lock through open core as explained in readme section? this new config will bypass this temporarily.

config.plist.zip

PribhuPatel commented 3 years ago

I tried config.plist provided by you and I got this logs when select Big Sur in opencore.

IMG_20210115_222956

lersy commented 3 years ago

maybe yours is similar to https://github.com/wadimw/dell-7577-hackintosh this one. try that efi from wadimw

PribhuPatel commented 3 years ago

My laptop has same specs except SSD which is mentioned in your repo description. I have Samsung 970 evo plus in my laptop. I think mac os is not compatible with this SSD. But I also read some newer posts that say new firmware support macOS. I have the latest Samsung SSD firmware.

lersy commented 3 years ago

After you update your bios version , try with this efi folder and make sure that you enable ahci mode to sata in bios setting. you can skip cfg lock part and vt part cuz they are enabled in config.plist for now. config.plist.zip we need more info on subject if possible.

PribhuPatel commented 3 years ago

I am uploading opencore log file here so you can get idea on it. opencore-2021-01-19-001219.txt

lersy commented 3 years ago

Ok, update your bios, adjust settings as explained ( and check these ones >>> Intel SGX enable & Enclave memory size 128MB ) and RESET NVRAM then try again.

Bro I don't get the lines in .txt file, so if above suggestion is not enough to solve it, please head over to r/hackintosh, insanelymac or even tonymax86 to seek help. sorry my knowledge ends here and I can't help further.