Closed HRmeteohub closed 4 years ago
Hi Tom, Have a look at https://github.com/lheijst/rtldavis. Here is described the installation of rtldavis which is used by weewx-rtldavis. Success, Luc
Verstuurd vanaf mijn iPad
Op 4 sep. 2020 om 04:33 heeft HRmeteohub notifications@github.com het volgende geschreven:
Hello! First, thank you for very nice tool for capturing the measurements from Davis weather stations. It hits the need right on, much better than ancient tech - that Davis consoles are. However, this morning I just did a fresh install of weewx-rtldavis on raspberry pi 4 with Raspibian/Python3. It failed in step 7: pi@raspberrypi:~ $ sudo PYTHONPATH=bin python bin/user/rtldavis.py --cmd="/home/pi/work/bin/rtldavis" python: can't open file 'bin/user/rtldavis.py': [Errno 2] No such file or directory So, I have looked at the procedure and found out that there is no step where rtldavis is installed. Therefore the ~/work/ folder is empty. Or did I made an error in my ways?
Thank you. Tom
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.
Hello.
After a considerable testing and combing through internet, I finally realized that my problems with weewx-rtldavis happened because not all USB SDR receivers are the same. There are many, many that are ... bad.
Hello! First, thank you for very nice tool for capturing the measurements from Davis weather stations. It hits the need right on, much better than ancient tech - that Davis consoles are. However, this morning I just did a fresh install of weewx-rtldavis on raspberry pi 4 with Raspibian/Python3. It failed in step 7:
pi@raspberrypi:~ $ sudo PYTHONPATH=bin python bin/user/rtldavis.py --cmd="/home/pi/work/bin/rtldavis" python: can't open file 'bin/user/rtldavis.py': [Errno 2] No such file or directory
So, I have looked at the procedure and found out that there is no step where rtldavis is installed. Therefore the ~/work/ folder is empty. Or did I made an error in my ways?Thank you. Tom