amlogic crashes and errors with 2GB boards on GXL (S905X S905D) with ethernet plugged in

[dsx724]

On S905X/S905D and other Amlogic platforms, we detect system hang and soft errors with S905X/S905D 2GB+ boards with ethernet plugged in. 1GB boards S805X/S905X do not have any problems. Some boards use the onboard PHY and others use an external PHY.

Requirements to trigger problem:

• 2GB/3GB S905X/S905D board
• Ethernet plugged in

There are currently several partial resolutions that break other things.

1. Set kernel cmdline to mem=1G to disallow the use of the RAM past 1GB. This effectively reduces usable memory by half.
2. Disable ethernet initialization in u-boot. -CONFIG_ETH_DESIGNWARE_MESON8B=y However, when we boot into Linux, unrecoverable "no carrier" ethernet issue despite full ethtool reset. I'm not sure if there's some ethernet bringup bits in u-boot that is not in upstream Linux.

This occurs on vanilla u-boot 2022.07 and Linux 5.19.0, 5.15, 5.10. Also occurs with the ethernet reset and stmmac don't double poke register patches.

This was tested in a setup with 10 S905X boards, 2 S805X boards, 1 S905D board. Boards varied by manufacturer but the problem is identical so this is not a manufacturer specific hardware issue. 4 S905X 2GB boards - normal kernel - normal u-boot: crash within 5 min. 2 S905X 2GB boards - normal kernel - no eth init u-boot: passes 24 hours but "no carrier" problem. 2 S905X 2GB board - mem=1G kernel - normal u-boot: passed 24 hours. 2 S905X 1GB board - normal kernel - normal u-boot: passes 24 hours. 2 S805X 1GB boards - normal kernel -normal u-boot: passes 24 hours. 1 S905D 3GB board - normal kernel - normal u-boot crashes within 5 mins.

The issue seems to originate from the stmmac used by Amlogic SoCs as both the integrated PHY and external gigabit PHYs are affected. We need more documentation on the implementation of this IP and possible quirks.

Things I have tried that are ineffective in solving the problem. CPU governor performance in cmdline Kernel without io elevator eMMC and MicroSD cards Changing rootfs between ext4/btrfs Happens across distributions ubuntu/debian Remove serial console from cmdline and device tree Reduce initial u-boot cpu and memory frquency to 888MHz

The following reboot script can be installed onto an Ubuntu image. It will stop rebooting if it detects a kernel taint. username ubuntu password ubuntu

P212 bootloader dd if=u-boot-latest-p212 of=/dev/SDCARD bs=512 seek=1

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.18.11-00249-gae322e500418 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]2 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x58347040 MEMRESERVE=0x58346040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3eab40-0x7f3ecfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000058346fff] [ 0.000000] node 0: [mem 0x0000000058347000-0x0000000058347fff] [ 0.000000] node 0: [mem 0x0000000058348000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s42856 r8192 d30872 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro console=tty1 console=ttyAML0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1678684K/2097152K available (13568K kernel code, 1686K rwdata, 5316K rodata, 3264K init, 391K bss, 156324K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000522] Console: colour dummy device 80x25 [ 0.001065] printk: console [tty1] enabled [ 0.001146] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001171] pid_max: default: 32768 minimum: 301 [ 0.001236] LSM: Security Framework initializing [ 0.001341] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001368] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002588] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002627] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002697] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002833] rcu: Hierarchical SRCU implementation. [ 0.003812] Remapping and enabling EFI services. [ 0.004210] smp: Bringing up secondary CPUs ... [ 0.004715] Detected VIPT I-cache on CPU1 [ 0.004780] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005362] Detected VIPT I-cache on CPU2 [ 0.005412] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005955] Detected VIPT I-cache on CPU3 [ 0.006002] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006071] smp: Brought up 1 node, 4 CPUs [ 0.006139] SMP: Total of 4 processors activated. [ 0.006151] CPU features: detected: 32-bit EL0 Support [ 0.006161] CPU features: detected: 32-bit EL1 Support [ 0.006172] CPU features: detected: CRC32 instructions [ 0.006552] CPU: All CPU(s) started at EL2 [ 0.006588] alternatives: patching kernel code [ 0.008047] devtmpfs: initialized [ 0.014013] Registered cp15_barrier emulation handler [ 0.014052] Registered setend emulation handler [ 0.014067] KASLR enabled [ 0.014241] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014271] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.020379] pinctrl core: initialized pinctrl subsystem [ 0.020934] SMBIOS 3.0 present. [ 0.020975] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.021460] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.022927] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.023133] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.023281] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.023370] audit: initializing netlink subsys (disabled) [ 0.023562] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.024573] thermal_sys: Registered thermal governor 'step_wise' [ 0.024584] thermal_sys: Registered thermal governor 'power_allocator' [ 0.024820] cpuidle: using governor menu [ 0.025063] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.025173] ASID allocator initialised with 32768 entries [ 0.025929] Serial: AMBA PL011 UART driver [ 0.038136] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.039516] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.039934] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.049918] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.049953] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.049966] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.049979] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.051254] ACPI: Interpreter disabled. [ 0.052467] iommu: Default domain type: Translated [ 0.052498] iommu: DMA domain TLB invalidation policy: strict mode [ 0.052778] SCSI subsystem initialized [ 0.053195] usbcore: registered new interface driver usbfs [ 0.053243] usbcore: registered new interface driver hub [ 0.053280] usbcore: registered new device driver usb [ 0.053626] pps_core: LinuxPPS API ver. 1 registered [ 0.053639] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.053664] PTP clock support registered [ 0.053784] EDAC MC: Ver: 3.0.0 [ 0.054320] Registered efivars operations [ 0.054738] FPGA manager framework [ 0.054844] Advanced Linux Sound Architecture Driver Initialized. [ 0.055563] vgaarb: loaded [ 0.056006] clocksource: Switched to clocksource arch_sys_counter [ 0.056227] VFS: Disk quotas dquot_6.6.0 [ 0.056291] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.056583] pnp: PnP ACPI: disabled [ 0.061716] NET: Registered PF_INET protocol family [ 0.061889] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.062890] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.062986] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.063011] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.063131] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.063352] TCP: Hash tables configured (established 16384 bind 16384) [ 0.063477] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.063536] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.063698] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.064123] RPC: Registered named UNIX socket transport module. [ 0.064151] RPC: Registered udp transport module. [ 0.064161] RPC: Registered tcp transport module. [ 0.064171] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.064189] PCI: CLS 0 bytes, default 64 [ 0.064413] Unpacking initramfs... [ 0.076617] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.077128] kvm [1]: IPA Size Limit: 40 bits [ 0.078286] kvm [1]: vgic interrupt IRQ9 [ 0.078431] kvm [1]: Hyp mode initialized successfully [ 0.079758] Initialise system trusted keyrings [ 0.080042] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.086067] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.086766] NFS: Registering the id_resolver key type [ 0.086819] Key type id_resolver registered [ 0.086832] Key type id_legacy registered [ 0.086937] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.086958] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.087188] 9p: Installing v9fs 9p2000 file system support [ 0.122418] Key type asymmetric registered [ 0.122453] Asymmetric key parser 'x509' registered [ 0.122542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.122561] io scheduler mq-deadline registered [ 0.122573] io scheduler kyber registered [ 0.122618] io scheduler bfq registered [ 0.123778] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.132178] EINJ: ACPI disabled. [ 0.140649] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.145218] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.147525] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 0.352509] Freeing initrd memory: 28836K [ 0.352944] printk: console [ttyAML0] enabled [ 1.223351] loop: module loaded [ 1.224231] megasas: 07.719.03.00-rc1 [ 1.228343] tun: Universal TUN/TAP device driver, 1.6 [ 1.230152] thunder_xcv, ver 1.0 [ 1.232761] thunder_bgx, ver 1.0 [ 1.235919] nicpf, ver 1.0 [ 1.238965] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.245737] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.251074] hclge is initializing [ 1.254278] e1000: Intel(R) PRO/1000 Network Driver [ 1.259092] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.264822] e1000e: Intel(R) PRO/1000 Network Driver [ 1.269702] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.275604] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.280915] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.286462] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.292645] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.298688] sky2: driver version 1.30 [ 1.302550] VFIO - User Level meta-driver version: 0.3 [ 1.308802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.313712] ehci-pci: EHCI PCI platform driver [ 1.318127] ehci-platform: EHCI generic platform driver [ 1.323417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.329416] ohci-pci: OHCI PCI platform driver [ 1.333843] ohci-platform: OHCI generic platform driver [ 1.339392] usbcore: registered new interface driver usb-storage [ 1.346654] i2c_dev: i2c /dev entries driver [ 1.351234] sdhci: Secure Digital Host Controller Interface driver [ 1.355301] sdhci: Copyright(c) Pierre Ossman [ 1.360059] Synopsys Designware Multimedia Card Interface Driver [ 1.366336] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.367007] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 1.376725] ledtrig-cpu: registered to indicate activity on CPUs [ 1.383490] efifb: probing for efifb [ 1.386308] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 1.392612] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.398645] efifb: scrolling: redraw [ 1.402180] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.414336] meson-gx-mmc d0074000.mmc: no support for card's volts [ 1.414351] mmc0: error -22 whilst initialising SDIO card [ 1.418093] Console: switching to colour frame buffer device 240x67 [ 1.439083] fb0: EFI VGA frame buffer device [ 1.443539] meson-sm: secure-monitor enabled [ 1.448369] usbcore: registered new interface driver usbhid [ 1.453052] usbhid: USB HID core driver [ 1.457521] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 1.467735] NET: Registered PF_PACKET protocol family [ 1.468847] 9pnet: Installing 9P2000 support [ 1.472946] Key type dns_resolver registered [ 1.477482] registered taskstats version 1 [ 1.481179] Loading compiled-in X.509 certificates [ 1.486544] zswap: loaded using pool lz4/z3fold [ 1.508079] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 1.508179] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 2.052973] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 2.054659] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 2.061885] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 2.070154] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.074078] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.081752] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 2.090994] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xc9000000 [ 2.096928] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.102230] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.109833] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.117056] hub 1-0:1.0: USB hub found [ 2.120039] hub 1-0:1.0: 2 ports detected [ 2.124314] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.132536] hub 2-0:1.0: USB hub found [ 2.135698] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 2.144798] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 2.14d346] meson-gx-mmc d0072000.mmc: Got CD GPIO omain-0 init dvfs: 4 [ 2.170002] ALSA device list: [ 2.170068] No soundcards found. [ 2.182509] Freeing unused kernel memory: 3264K [ 2.188093] Run /init as init process Loading, please wait... [ 2.228162] mmc1: new high speed SDHC card at address aaaa [ 2.231295] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 2.242075] mmcblk1: p1 p2 Starting version 249.11-0ubuntu3.4 [ 2.380058] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.448478] mmc0: Card stuck being busy! mmc_poll_for_busy [ 2.564895] hub 1-1:1.0: USB hub found [ 2.567289] hub 1-1:1.0: 4 ports detected [ 2.651611] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 2.654806] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 2.660908] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 2.667625] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 2.673785] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 2.674501] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 2.678892] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 2.691821] fb0: switching to meson from EFI VGA [ 2.691871] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 2.703889] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 2.709064] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 2.716016] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 2.729494] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 2.735736] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 2.738944] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 2.744857] Console: switching to colour dummy device 80x25 [ 2.748579] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.770440] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 2.770501] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 2.770542] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 2.770587] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 2.770599] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 2.782134] lima d00c0000.gpu: bus rate = 166666667 [ 2.814147] lima d00c0000.gpu: mod rate = 24000000 [ 2.814240] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.815562] lima d00c0000.gpu: Failed to register cooling device [ 2.832861] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 [ 2.844121] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 2.853112] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 2.857118] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 2.866320] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 2.936030] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 3.114041] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 3.187593] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 3.226216] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 3.240429] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 3.320887] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 3.325082] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 3.326232] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 3.326846] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 3.516944] Console: switching to colour frame buffer device 240x67 [ 3.649586] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 4.144006] raid6: neonx8 gen() 2601 MB/s [ 4.212001] raid6: neonx4 gen() 2642 MB/s [ 4.280033] raid6: neonx2 gen() 2548 MB/s [ 4.348007] raid6: neonx1 gen() 1720 MB/s [ 4.416001] raid6: int64x8 gen() 1434 MB/s [ 4.484006] raid6: int64x4 gen() 1999 MB/s [ 4.551999] raid6: int64x2 gen() 1671 MB/s [ 4.620005] raid6: int64x1 gen() 1244 MB/s [ 4.620072] raid6: using algorithm neonx4 gen() 2642 MB/s [ 4.692011] raid6: .... xor() 1893 MB/s, rmw enabled [ 4.692017] raid6: using neon recovery algorithm [ 4.696826] xor: measuring software checksum speed [ 4.703720] 8regs : 3309 MB/sec [ 4.708000] 32regs : 3309 MB/sec [ 4.712694] arm64_neon : 2932 MB/sec [ 4.713637] xor: using function: 32regs (3309 MB/sec) [ 4.739930] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no Scanning for Btrfs filesystems [ 4.895336] BTRFS: device label writable devid 1 transid 268 /dev/mmcblk1p2 scanned by btrfs (244) done. Begin: Will now check root file system ... fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 done. [ 5.038718] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 5.040617] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 5.047214] BTRFS info (device mmcblk1p2): has skinny extents [ 5.074261] BTRFS info (device mmcblk1p2): enabling ssd optimizations done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 26.375994] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 26.376522] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 26.382639] (detected by 2, t=5252 jiffies, g=-331, q=578) [ 26.388154] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 26.398026] Call trace: [ 26.400370] dump_backtrace.part.6+0xdc/0xe8 [ 26.404613] show_stack+0x18/0x68 [ 26.407881] sched_show_task+0x154/0x198 [ 26.411768] rcu_sched_clock_irq+0xd10/0xdd8 [ 26.415997] update_process_times+0x9c/0xd0 [ 26.420137] tick_sched_handle.isra.19+0x34/0x58 [ 26.424712] tick_sched_timer+0x4c/0xa8 [ 26.428500] hrtimer_run_queues+0x120/0x1b8 [ 26.432817] hrtimer_interrupt+0xd8/0x238 [ 26.436782] arch_timer_handler_phys+0x2c/0x50 [ 26.444535] handle_percpu_devid_irq+0x84/0x138 [ 26.448962] generic_handle_domain_irq+0x2c/0x48 [ 26.453508] gic_handle_irq+0xa4/0xc0 [ 26.457100] call_on_irq_stack+0x2c/0x58 [ 26.460946] do_interrupt_handler+0x80/0x88 [ 26.465056] el1_interrupt+0x38/0x70 [ 26.468552] el1h_64_irq_handler+0x18/0x28 [ 26.472573] el1h_64_irq+0x64/0x68 [ 26.475888] xas_find+0x188/0x1d8 [ 26.479124] find_lock_entries+0x7c/0x280 [ 26.483067] truncate_inode_pages_range+0xa8/0x490 [ 26.487796] truncate_inode_pages_final+0x58/0x78 [ 26.492409] evict+0x144/0x150 [ 26.495383] iput+0x128/0x190 [ 26.498282] do_unlinkat+0x17c/0x2a8 [ 26.501774] __arm64_sys_unlinkat+0x40/0x88 [ 26.505887] invoke_syscall+0x44/0x100 [ 26.509558] el0_svc_common.constprop.3+0x6c/0xf0 [ 26.514194] do_el0_svc+0x24/0x88 [ 26.517430] el0_svc+0x20/0x60 [ 26.520405] el0t_64_sync_handler+0x90/0xb8 [ 26.524520] el0t_64_sync+0x170/0x174 [ 33.764023] VDDIO_BOOT: disabling [ 89.543994] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 89.546985] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 89.553110] (detected by 2, t=21046 jiffies, g=-331, q=578) [ 89.558745] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 89.568546] Call trace: [ 89.570963] dump_backtrace.part.6+0xdc/0xe8 [ 89.575051] show_stack+0x18/0x68 [ 89.578290] sched_show_task+0x154/0x198 [ 89.582193] rcu_sched_clock_irq+0xd10/0xdd8 [ 89.586442] update_process_times+0x9c/0xd0 [ 89.590597] tick_sched_handle.isra.19+0x34/0x58 [ 89.595189] tick_sched_timer+0x4c/0xa8 [ 89.598992] hrtimer_run_queues+0x120/0x1b8 [ 89.603328] hrtimer_interrupt+0xd8/0x238 [ 89.607314] arch_timer_handler_phys+0x2c/0x50 [ 89.611714] handle_percpu_devid_irq+0x84/0x138 [ 89.616191] generic_handle_domain_irq+0x2c/0x48 [ 89.620768] gic_handle_irq+0xa4/0xc0 [ 89.624378] call_on_irq_stack+0x2c/0x58 [ 89.628252] do_interrupt_handler+0x80/0x88 [ 89.632413] el1_interrupt+0x38/0x70 [ 89.635955] el1h_64_irq_handler+0x18/0x28 [ 89.640004] el1h_64_irq+0x64/0x68 [ 89.643329] xas_descend+0x24/0x88 [ 89.646637] xas_find+0x190/0x1d8 [ 89.649863] find_lock_entries+0x7c/0x280 [ 89.653831] truncate_inode_pages_range+0xa8/0x490 [ 89.658589] truncate_inode_pages_final+0x58/0x78 [ 89.663232] evict+0x144/0x150 [ 89.666216] iput+0x128/0x190 [ 89.669125] do_unlinkat+0x17c/0x2a8 [ 89.672642] arm64_sys_unlinkat+0x40/0x88 [ 89.676746] invoke_syscall+0x44/0x100 [ 89.680416] el0_svc_common.constprop.3+0x6c/0xf0 [ 89.685085] do_el0_svc+0x24/0x88 [ 89.688353] el0_svc+0x20/0x60 [ 89.691366] el0t_64_sync_handler+0x90/0xb8 [ 89.695513] el0t_64_sync+0x170/0x174 [ 152.687993] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 152.690729] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 152.696831] (detected by 2, t=36832 jiffies, g=-331, q=578) [ 152.702443] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 152.712356] Call trace: [ 152.714732] dump_backtrace.part.6+0xdc/0xe8 [ 152.718978] show_stack+0x18/0x68 [ 152.722241] sched_show_task+0x154/0x198 [ 152.726122] rcu_sched_clock_irq+0xd10/0xdd8 [ 152.730355] update_process_times+0x9c/0xd0 [ 152.734491] tick_sched_handle.isra.19+0x34/0x58 [ 152.739071] tick_sched_timer+0x4c/0xa8 [ 152.742856] hrtimer_run_queues+0x120/0x1b8 [ 152.747184] hrtimer_interrupt+0xd8/0x238 [ 152.751157] arch_timer_handler_phys+0x2c/0x50 [ 152.755564] handle_percpu_devid_irq+0x84/0x138 [ 152.760043] generic_handle_domain_irq+0x2c/0x48 [ 152.764635] gic_handle_irq+0xa4/0xc0 [ 152.768246] call_on_irq_stack+0x2c/0x58 [ 152.772137] do_interrupt_handler+0x80/0x88 [ 152.776285] el1_interrupt+0x38/0x70 [ 152.779814] el1h_64_irq_handler+0x18/0x28 [ 152.783869] el1h_64_irq+0x64/0x68 [ 152.787214] xas_load+0x54/0x78 [ 152.790305] xas_find+0x190/0x1d8 [ 152.793578] find_lock_entries+0x7c/0x280 [ 152.797553] truncate_inode_pages_range+0xa8/0x490 [ 152.802319] truncate_inode_pages_final+0x58/0x78 [ 152.806962] evict+0x144/0x150 [ 152.809949] iput+0x128/0x190 [ 152.812856] do_unlinkat+0x17c/0x2a8 [ 152.816375] arm64_sys_unlinkat+0x40/0x88 [ 152.820477] invoke_syscall+0x44/0x100 [ 152.824148] el0_svc_common.constprop.3+0x6c/0xf0 [ 152.828819] do_el0_svc+0x24/0x88 [ 152.832087] el0_svc+0x20/0x60 [ 152.835101] el0t_64_sync_handler+0x90/0xb8 [ 152.839247] el0t_64_sync+0x170/0x174

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.18.11-00249-gae322e500418 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]2 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x58347040 MEMRESERVE=0x58346040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3ebb40-0x7f3edfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000058346fff] [ 0.000000] node 0: [mem 0x0000000058347000-0x0000000058347fff] [ 0.000000] node 0: [mem 0x0000000058348000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s42856 r8192 d30872 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro systemd.log_level=debug systemd.log_target=console console=tty1 console0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1678688K/2097152K available (13568K kernel code, 1686K rwdata, 5316K rodata, 3264K init, 391K bss, 156320K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000541] Console: colour dummy device 80x25 [ 0.001087] printk: console [tty1] enabled [ 0.001165] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001189] pid_max: default: 32768 minimum: 301 [ 0.001254] LSM: Security Framework initializing [ 0.001358] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001385] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002606] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002646] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002718] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002852] rcu: Hierarchical SRCU implementation. [ 0.003857] Remapping and enabling EFI services. [ 0.004252] smp: Bringing up secondary CPUs ... [ 0.004756] Detected VIPT I-cache on CPU1 [ 0.004819] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005389] Detected VIPT I-cache on CPU2 [ 0.005442] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005974] Detected VIPT I-cache on CPU3 [ 0.006023] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006094] smp: Brought up 1 node, 4 CPUs [ 0.006163] SMP: Total of 4 processors activated. [ 0.006175] CPU features: detected: 32-bit EL0 Support [ 0.006184] CPU features: detected: 32-bit EL1 Support [ 0.006196] CPU features: detected: CRC32 instructions [ 0.006579] CPU: All CPU(s) started at EL2 [ 0.006613] alternatives: patching kernel code [ 0.008062] devtmpfs: initialized [ 0.014103] Registered cp15_barrier emulation handler [ 0.014141] Registered setend emulation handler [ 0.014156] KASLR enabled [ 0.014334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014365] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.020463] pinctrl core: initialized pinctrl subsystem [ 0.021017] SMBIOS 3.0 present. [ 0.021057] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.021542] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.022937] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.023108] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.023248] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.023372] audit: initializing netlink subsys (disabled) [ 0.023600] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.024581] thermal_sys: Registered thermal governor 'step_wise' [ 0.024593] thermal_sys: Registered thermal governor 'power_allocator' [ 0.024830] cpuidle: using governor menu [ 0.025140] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.025244] ASID allocator initialised with 32768 entries [ 0.026014] Serial: AMBA PL011 UART driver [ 0.038172] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.039572] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.039984] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.050013] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.050047] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.050060] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.050074] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.051327] ACPI: Interpreter disabled. [ 0.052570] iommu: Default domain type: Translated [ 0.052603] iommu: DMA domain TLB invalidation policy: strict mode [ 0.052885] SCSI subsystem initialized [ 0.053282] usbcore: registered new interface driver usbfs [ 0.053330] usbcore: registered new interface driver hub [ 0.053370] usbcore: registered new device driver usb [ 0.053716] pps_core: LinuxPPS API ver. 1 registered [ 0.053731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.053755] PTP clock support registered [ 0.053882] EDAC MC: Ver: 3.0.0 [ 0.054422] Registered efivars operations [ 0.054840] FPGA manager framework [ 0.054941] Advanced Linux Sound Architecture Driver Initialized. [ 0.055663] vgaarb: loaded [ 0.056177] clocksource: Switched to clocksource arch_sys_counter [ 0.056410] VFS: Disk quotas dquot_6.6.0 [ 0.056460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.056630] pnp: PnP ACPI: disabled [ 0.061899] NET: Registered PF_INET protocol family [ 0.062073] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.063069] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.063179] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.063207] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.063326] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.063530] TCP: Hash tables configured (established 16384 bind 16384) [ 0.063651] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.063710] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.063877] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.064296] RPC: Registered named UNIX socket transport module. [ 0.064327] RPC: Registered udp transport module. [ 0.064337] RPC: Registered tcp transport module. [ 0.064347] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.064364] PCI: CLS 0 bytes, default 64 [ 0.064562] Unpacking initramfs... [ 0.076740] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.077282] kvm [1]: IPA Size Limit: 40 bits [ 0.078410] kvm [1]: vgic interrupt IRQ9 [ 0.078555] kvm [1]: Hyp mode initialized successfully [ 0.079939] Initialise system trusted keyrings [ 0.080235] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.086396] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.087123] NFS: Registering the id_resolver key type [ 0.087182] Key type id_resolver registered [ 0.087194] Key type id_legacy registered [ 0.087305] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.087325] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.087563] 9p: Installing v9fs 9p2000 file system support [ 0.124441] Key type asymmetric registered [ 0.124480] Asymmetric key parser 'x509' registered [ 0.124579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.124603] io scheduler mq-deadline registered [ 0.124614] io scheduler kyber registered [ 0.124667] io scheduler bfq registered [ 0.125826] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.134381] EINJ: ACPI disabled. [ 0.142653] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.147316] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.149871] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 0.273562] printk: console [ttyAML0] enabled [ 0.281719] loop: module loaded [ 0.282615] megasas: 07.719.03.00-rc1 [ 0.287037] tun: Universal TUN/TAP device driver, 1.6 [ 0.287862] thunder_xcv, ver 1.0 [ 0.287943] thunder_bgx, ver 1.0 [ 0.288007] nicpf, ver 1.0 [ 0.288872] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.289129] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.289855] hclge is initializing [ 0.290135] e1000: Intel(R) PRO/1000 Network Driver [ 0.290673] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.291405] e1000e: Intel(R) PRO/1000 Network Driver [ 0.291905] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.292671] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.293205] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.293901] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.294565] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.295537] sky2: driver version 1.30 [ 0.296332] VFIO - User Level meta-driver version: 0.3 [ 0.298570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.298709] ehci-pci: EHCI PCI platform driver [ 0.299284] ehci-platform: EHCI generic platform driver [ 0.300068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.300585] ohci-pci: OHCI PCI platform driver [ 0.301127] ohci-platform: OHCI generic platform driver [ 0.302300] usbcore: registered new interface driver usb-storage [ 0.305381] i2c_dev: i2c /dev entries driver [ 0.308483] sdhci: Secure Digital Host Controller Interface driver [ 0.308579] sdhci: Copyright(c) Pierre Ossman [ 0.309900] Synopsys Designware Multimedia Card Interface Driver [ 0.311452] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.311923] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.313505] ledtrig-cpu: registered to indicate activity on CPUs [ 0.314283] efifb: probing for efifb [ 0.314469] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.314825] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.315522] efifb: scrolling: redraw [ 0.315929] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.326306] Console: switching to colour frame buffer device 240x67 [ 0.335259] fb0: EFI VGA frame buffer device [ 0.336069] meson-sm: secure-monitor enabled [ 0.337181] usbcore: registered new interface driver usbhid [ 0.337341] usbhid: USB HID core driver [ 0.338791] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.343205] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.343385] mmc0: error -22 whilst initialising SDIO card [ 0.343478] Freeing initrd memory: 28836K [ 0.344794] NET: Registered PF_PACKET protocol family [ 0.345226] 9pnet: Installing 9P2000 support [ 0.345591] Key type dns_resolver registered [ 0.346457] registered taskstats version 1 [ 0.346537] Loading compiled-in X.509 certificates [ 0.347617] zswap: loaded using pool lz4/z3fold [ 0.365560] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.365661] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 0.897117] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 0.897507] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 0.898433] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 0.900619] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.900735] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.901690] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 0.902695] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xc9000000 [ 0.903426] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.903947] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.904893] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.906232] hub 1-0:1.0: USB hub found [ 0.906330] hub 1-0:1.0: 2 ports detected [ 0.906865] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.907987] hub 2-0:1.0: USB hub found [ 0.908083] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.910753] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 0.911184] meson-gx-mmc d0072000.mmc: Got Cd GPIO omain-0 init dvfs: 4 [ 0.920795] ALSA device list: [ 0.920861] No soundcards found. [ 0.939733] Freeing unused kernel memory: 3264K [ 0.939912] Run /init as init process Loading, please wait... [ 0.981994] mmc1: new high speed SDHC card at address aaaa [ 0.985098] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 0.993434] mmcblk1: p1 p2 Starting version 249.11-0ubuntu3.4 [ 1.160212] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.356649] mmc0: Card stuck being busy! mmc_poll_for_busy [ 1.362022] hub 1-1:1.0: USB hub found [ 1.364349] hub 1-1:1.0: 4 ports detected [ 1.418513] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.420858] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.423008] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.426148] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.428072] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.428315] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.430408] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.432462] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.434439] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.436685] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.438682] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.440947] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.442955] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.445122] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.447267] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.449614] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.452546] lima d00c0000.gpu: bus rate = 166666667 [ 1.456044] lima d00c0000.gpu: mod rate = 24000000 [ 1.457360] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.458366] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 1.460255] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.463308] lima d00c0000.gpu: Failed to register cooling device [ 1.464733] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.471633] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 1.480906] fb0: switching to meson from EFI VGA [ 1.483655] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0 [ 1.489147] Console: switching to colour dummy device 80x25 [ 1.520284] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.526453] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.527124] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.528566] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1 [ 1.768257] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 1.965779] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.027661] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.043115] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.044731] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.106509] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.107541] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.108578] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.109195] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.185066] Console: switching to colour frame buffer device 240x67 [ 2.241783] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 2.748149] raid6: neonx8 gen() 2603 MB/s [ 2.816148] raid6: neonx4 gen() 2653 MB/s [ 2.884177] raid6: neonx2 gen() 2590 MB/s [ 2.952147] raid6: neonx1 gen() 1717 MB/s [ 3.020144] raid6: int64x8 gen() 1434 MB/s [ 3.088150] raid6: int64x4 gen() 2000 MB/s [ 3.156152] raid6: int64x2 gen() 1672 MB/s [ 3.224161] raid6: int64x1 gen() 1244 MB/s [ 3.224232] raid6: using algorithm neonx4 gen() 2653 MB/s [ 3.292143] raid6: .... xor() 1889 MB/s, rmw enabled [ 3.292214] raid6: using neon recovery algorithm [ 3.293869] xor: measuring software checksum speed [ 3.296991] 8regs : 3309 MB/sec [ 3.300053] 32regs : 3309 MB/sec [ 3.303482] arm64_neon : 2932 MB/sec [ 3.303548] xor: using function: 32regs (3309 MB/sec) [ 3.325354] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no Scanning for Btrfs filesystems [ 3.477685] BTRFS: device label writable devid 1 transid 312 /dev/mmcblk1p2 scanned by btrfs (241) done. Begin: Will now check root file system ... fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 done. [ 3.629220] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 3.629592] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 3.630332] BTRFS info (device mmcblk1p2): has skinny extents [ 3.648872] BTRFS info (device mmcblk1p2): enabling ssd optimizations done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 24.952140] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 24.952286] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 24.952988] (detected by 1, t=5252 jiffies, g=-395, q=734) [ 24.953623] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 24.954804] Call trace: [ 24.955012] dump_backtrace.part.6+0xdc/0xe8 [ 24.955520] show_stack+0x18/0x68 [ 24.955890] sched_show_task+0x154/0x198 [ 24.956345] rcu_sched_clock_irq+0xd10/0xdd8 [ 24.956838] update_process_times+0x9c/0xd0 [ 24.957318] tick_sched_handle.isra.19+0x34/0x58 [ 24.961440] tick_sched_timer+0x4c/0xa8 [ 24.965020] hrtimer_run_queues+0x120/0x1b8 [ 24.968577] hrtimer_interrupt+0xd8/0x238 [ 24.972105] arch_timer_handler_phys+0x2c/0x50 [ 24.975622] handle_percpu_devid_irq+0x84/0x138 [ 24.979150] generic_handle_domain_irq+0x2c/0x48 [ 24.982666] gic_handle_irq+0xa4/0xc0 [ 24.986150] call_on_irq_stack+0x2c/0x58 [ 24.989607] do_interrupt_handler+0x80/0x88 [ 24.993048] el1_interrupt+0x38/0x70 [ 24.996460] el1h_64_irq_handler+0x18/0x28 [ 24.999851] el1h_64_irq+0x64/0x68 [ 25.003209] xas_find+0x8/0x1d8 [ 25.006535] truncate_inode_pages_range+0xa8/0x490 [ 25.009862] truncate_inode_pages_final+0x58/0x78 [ 25.013143] evict+0x144/0x150 [ 25.016378] iput+0x128/0x190 [ 25.019565] do_unlinkat+0x17c/0x2a8 [ 25.022721] __arm64_sys_unlinkat+0x40/0x88 [ 25.025851] invoke_syscall+0x44/0x100 [ 25.028941] el0_svc_common.constprop.3+0x6c/0xf0 [ 25.032013] do_el0_svc+0x24/0x88 [ 25.035042] el0_svc+0x20/0x60 [ 25.038033] el0t_64_sync_handler+0x90/0xb8 [ 25.040917] el0t_64_sync+0x170/0x174 [ 31.712163] VDDIO_BOOT: disabling [ 88.060141] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 88.062834] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 88.065420] (detected by 1, t=21030 jiffies, g=-395, q=734) [ 88.067978] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 88.071124] Call trace: [ 88.073624] dump_backtrace.part.6+0xdc/0xe8 [ 88.076067] show_stack+0x18/0x68 [ 88.078464] sched_show_task+0x154/0x198 [ 88.080839] rcu_sched_clock_irq+0xd10/0xdd8 [ 88.083237] update_process_times+0x9c/0xd0 [ 88.085650] tick_sched_handle.isra.19+0x34/0x58 [ 88.088089] tick_sched_timer+0x4c/0xa8 [ 88.090525] hrtimer_run_queues+0x120/0x1b8 [ 88.092988] hrtimer_interrupt+0xd8/0x238 [ 88.095466] arch_timer_handler_phys+0x2c/0x50 [ 88.097971] handle_percpu_devid_irq+0x84/0x138 [ 88.100470] generic_handle_domain_irq+0x2c/0x48 [ 88.102968] gic_handle_irq+0xa4/0xc0 [ 88.105457] call_on_irq_stack+0x2c/0x58 [ 88.107940] do_interrupt_handler+0x80/0x88 [ 88.110419] el1_interrupt+0x38/0x70 [ 88.112909] el1h_64_irq_handler+0x18/0x28 [ 88.115413] el1h_64_irq+0x64/0x68 [ 88.117891] xas_load+0x68/0x78 [ 88.120337] xas_find+0x190/0x1d8 [ 88.122728] find_lock_entries+0x7c/0x280 [ 88.125090] truncate_inode_pages_range+0xa8/0x490 [ 88.127462] truncate_inode_pages_final+0x58/0x78 [ 88.129816] evict+0x144/0x150 [ 88.132161] iput+0x128/0x190 [ 88.134470] do_unlinkat+0x17c/0x2a8 [ 88.136768] arm64_sys_unlinkat+0x40/0x88 [ 88.139056] invoke_syscall+0x44/0x100 [ 88.141295] el0_svc_common.constprop.3+0x6c/0xf0 [ 88.143518] do_el0_svc+0x24/0x88 [ 88.145726] el0_svc+0x20/0x60 [ 88.147925] el0t_64_sync_handler+0x90/0xb8 [ 88.150140] el0t_64_sync+0x170/0x174

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.18.11-00249-gae322e500418 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]2 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae90040 SMBIOS=0x7ae8c000 RNG=0x5834f040 MEMRESERVE=0x5834e040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3ebb40-0x7f3edfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x000000005834efff] [ 0.000000] node 0: [mem 0x000000005834f000-0x000000005834ffff] [ 0.000000] node 0: [mem 0x0000000058350000-0x000000007ae8bfff] [ 0.000000] node 0: [mem 0x000000007ae8c000-0x000000007ae8cfff] [ 0.000000] node 0: [mem 0x000000007ae8d000-0x000000007ae8ffff] [ 0.000000] node 0: [mem 0x000000007ae90000-0x000000007ae92fff] [ 0.000000] node 0: [mem 0x000000007ae93000-0x000000007ae93fff] [ 0.000000] node 0: [mem 0x000000007ae94000-0x000000007ae97fff] [ 0.000000] node 0: [mem 0x000000007ae98000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s42856 r8192 d30872 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro systemd.log_level=debug systemd.log_target=console console=tty1 console0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.18.11-00249-gae322e500418", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1678688K/2097152K available (13568K kernel code, 1686K rwdata, 5316K rodata, 3264K init, 391K bss, 156320K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000538] Console: colour dummy device 80x25 [ 0.001089] printk: console [tty1] enabled [ 0.001171] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001196] pid_max: default: 32768 minimum: 301 [ 0.001262] LSM: Security Framework initializing [ 0.001369] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001395] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002650] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002690] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002761] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002895] rcu: Hierarchical SRCU implementation. [ 0.003959] Remapping and enabling EFI services. [ 0.004318] smp: Bringing up secondary CPUs ... [ 0.004830] Detected VIPT I-cache on CPU1 [ 0.004898] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005494] Detected VIPT I-cache on CPU2 [ 0.005549] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.006092] Detected VIPT I-cache on CPU3 [ 0.006144] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006217] smp: Brought up 1 node, 4 CPUs [ 0.006285] SMP: Total of 4 processors activated. [ 0.006297] CPU features: detected: 32-bit EL0 Support [ 0.006308] CPU features: detected: 32-bit EL1 Support [ 0.006320] CPU features: detected: CRC32 instructions [ 0.006717] CPU: All CPU(s) started at EL2 [ 0.006751] alternatives: patching kernel code [ 0.008209] devtmpfs: initialized [ 0.014357] Registered cp15_barrier emulation handler [ 0.014396] Registered setend emulation handler [ 0.014412] KASLR enabled [ 0.014589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014619] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.021063] pinctrl core: initialized pinctrl subsystem [ 0.021634] SMBIOS 3.0 present. [ 0.021676] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.04-00027-gc68ee87348-dirty 04/01/2022 [ 0.022168] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.023711] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.023927] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.024121] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.024218] audit: initializing netlink subsys (disabled) [ 0.024421] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.025412] thermal_sys: Registered thermal governor 'step_wise' [ 0.025424] thermal_sys: Registered thermal governor 'power_allocator' [ 0.025668] cpuidle: using governor menu [ 0.025962] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.026075] ASID allocator initialised with 32768 entries [ 0.026855] Serial: AMBA PL011 UART driver [ 0.039158] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.040616] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.041046] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.051116] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.051152] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.051166] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.051179] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.052511] ACPI: Interpreter disabled. [ 0.053796] iommu: Default domain type: Translated [ 0.053829] iommu: DMA domain TLB invalidation policy: strict mode [ 0.054117] SCSI subsystem initialized [ 0.054513] usbcore: registered new interface driver usbfs [ 0.054562] usbcore: registered new interface driver hub [ 0.054604] usbcore: registered new device driver usb [ 0.054952] pps_core: LinuxPPS API ver. 1 registered [ 0.054965] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.054989] PTP clock support registered [ 0.055113] EDAC MC: Ver: 3.0.0 [ 0.055666] Registered efivars operations [ 0.056109] FPGA manager framework [ 0.056220] Advanced Linux Sound Architecture Driver Initialized. [ 0.057007] vgaarb: loaded [ 0.057524] clocksource: Switched to clocksource arch_sys_counter [ 0.057757] VFS: Disk quotas dquot_6.6.0 [ 0.057814] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.058017] pnp: PnP ACPI: disabled [ 0.063369] NET: Registered PF_INET protocol family [ 0.063547] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.064563] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.064664] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.064690] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.064810] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.065018] TCP: Hash tables configured (established 16384 bind 16384) [ 0.065146] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.065207] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.065377] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.065833] RPC: Registered named UNIX socket transport module. [ 0.065862] RPC: Registered udp transport module. [ 0.065872] RPC: Registered tcp transport module. [ 0.065882] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.065899] PCI: CLS 0 bytes, default 64 [ 0.066113] Unpacking initramfs... [ 0.078137] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.078717] kvm [1]: IPA Size Limit: 40 bits [ 0.079869] kvm [1]: vgic interrupt IRQ9 [ 0.080023] kvm [1]: Hyp mode initialized successfully [ 0.081410] Initialise system trusted keyrings [ 0.081715] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.087868] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.088611] NFS: Registering the id_resolver key type [ 0.088663] Key type id_resolver registered [ 0.088675] Key type id_legacy registered [ 0.088757] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.088772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.088955] 9p: Installing v9fs 9p2000 file system support [ 0.125398] Key type asymmetric registered [ 0.125443] Asymmetric key parser 'x509' registered [ 0.125584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.125615] io scheduler mq-deadline registered [ 0.125627] io scheduler kyber registered [ 0.125690] io scheduler bfq registered [ 0.126790] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.135920] EINJ: ACPI disabled. [ 0.144707] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.149750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.152173] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 0.275932] printk: console [ttyAML0] enabled [ 0.285122] loop: module loaded [ 0.286210] megasas: 07.719.03.00-rc1 [ 0.290749] tun: Universal TUN/TAP device driver, 1.6 [ 0.291688] thunder_xcv, ver 1.0 [ 0.291784] thunder_bgx, ver 1.0 [ 0.291835] nicpf, ver 1.0 [ 0.292689] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.292958] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.293701] hclge is initializing [ 0.293970] e1000: Intel(R) PRO/1000 Network Driver [ 0.294502] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.295260] e1000e: Intel(R) PRO/1000 Network Driver [ 0.295735] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.296485] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.297034] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.297766] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.298395] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.299349] sky2: driver version 1.30 [ 0.300090] VFIO - User Level meta-driver version: 0.3 [ 0.302097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.302237] ehci-pci: EHCI PCI platform driver [ 0.302800] ehci-platform: EHCI generic platform driver [ 0.303590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.304084] ohci-pci: OHCI PCI platform driver [ 0.304641] ohci-platform: OHCI generic platform driver [ 0.305855] usbcore: registered new interface driver usb-storage [ 0.308764] i2c_dev: i2c /dev entries driver [ 0.312460] sdhci: Secure Digital Host Controller Interface driver [ 0.312558] sdhci: Copyright(c) Pierre Ossman [ 0.314000] Synopsys Designware Multimedia Card Interface Driver [ 0.315616] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.316343] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.318257] ledtrig-cpu: registered to indicate activity on CPUs [ 0.319175] efifb: probing for efifb [ 0.319353] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.319722] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.320419] efifb: scrolling: redraw [ 0.320828] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.331236] Console: switching to colour frame buffer device 240x67 [ 0.340185] fb0: EFI VGA frame buffer device [ 0.340992] meson-sm: secure-monitor enabled [ 0.342196] usbcore: registered new interface driver usbhid [ 0.342302] usbhid: USB HID core driver [ 0.343581] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.349179] NET: Registered PF_PACKET protocol family [ 0.349256] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.349609] 9pnet: Installing 9P2000 support [ 0.350118] mmc0: error -22 whilst initialising SDIO card [ 0.350625] Key type dns_resolver registered [ 0.352521] registered taskstats version 1 [ 0.352638] Loading compiled-in X.509 certificates [ 0.353982] zswap: loaded using pool lz4/z3fold [ 0.358223] Freeing initrd memory: 28836K [ 0.374892] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.374993] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 0.894537] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 0.894930] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 0.895840] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 0.898125] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.898241] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.899199] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 0.900204] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xc9000000 [ 0.900938] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.901457] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.902402] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.903743] hub 1-0:1.0: USB hub found [ 0.903840] hub 1-0:1.0: 2 ports detected [ 0.904394] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.905506] hub 2-0:1.0: USB hub found [ 0.905657] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.908395] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 0.908824] meson-gx-mmc d0072000.mmc: Got CD GdPIO omain-0 init dvfs: 4 [ 0.918671] ALSA device list: [ 0.918741] No soundcards found. [ 0.934991] Freeing unused kernel memory: 3264K [ 0.935183] Run /init as init process Loading, please wait... [ 0.978421] mmc1: new high speed SDHC card at address aaaa [ 0.983073] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 0.991937] mmcblk1: p1 p2 Starting version 249.11-0ubuntu3.4 [ 1.157598] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.352095] hub 1-1:1.0: USB hub found [ 1.355690] hub 1-1:1.0: 4 ports detected [ 1.411803] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 1.414464] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.416666] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.416719] fb0: switching to meson from EFI VGA [ 1.419003] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.419097] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.419106] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.419206] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.421457] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.423294] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.425455] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.429853] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.431901] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.440763] mmc0: Card stuck being busy! mmc_poll_for_busy [ 1.440870] Console: switching to colour dummy device 80x25 [ 1.443520] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.444686] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.444943] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.445564] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.446349] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.447199] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.447769] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.448432] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.451152] lima d00c0000.gpu: bus rate = 166666667 [ 1.451213] lima d00c0000.gpu: mod rate = 24000000 [ 1.451749] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 1.463970] lima d00c0000.gpu: Failed to register cooling device [ 1.468010] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0 [ 1.469660] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.472365] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.473076] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.483577] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1 [ 2.154867] Console: switching to colour frame buffer device 240x67 [ 2.252333] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device Begin: Loading essential drivers ... [ 2.553572] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 2.745633] raid6: neonx8 gen() 2594 MB/s [ 2.767148] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.813650] raid6: neonx4 gen() 458 MB/s [ 2.830102] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.837778] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.839763] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.881552] raid6: neonx2 gen() 2238 MB/s [ 2.905862] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.907741] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.909770] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.911687] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.949558] raid6: neonx1 gen() 1738 MB/s [ 3.017516] raid6: int64x8 gen() 1433 MB/s [ 3.085526] raid6: int64x4 gen() 1998 MB/s [ 3.153525] raid6: int64x2 gen() 1672 MB/s [ 3.221521] raid6: int64x1 gen() 1240 MB/s [ 3.221616] raid6: using algorithm neonx8 gen() 2594 MB/s [ 3.289518] raid6: .... xor() 1955 MB/s, rmw enabled [ 3.289592] raid6: using neon recovery algorithm [ 3.291376] xor: measuring software checksum speed [ 3.294498] 8regs : 3309 MB/sec [ 3.297585] 32regs : 3309 MB/sec [ 3.301009] arm64_neon : 2932 MB/sec [ 3.301072] xor: using function: 32regs (3309 MB/sec) [ 3.323642] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no Scanning for Btrfs filesystems [ 3.479683] BTRFS: device label writable devid 1 transid 353 /dev/mmcblk1p2 scanned by btrfs (243) done. Begin: Will now check root file system ... fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2 done. [ 3.625772] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 3.626140] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 3.626884] BTRFS info (device mmcblk1p2): has skinny extents [ 3.645934] BTRFS info (device mmcblk1p2): enabling ssd optimizations done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 24.965511] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 24.965659] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 24.966360] (detected by 1, t=5252 jiffies, g=-435, q=1036) [ 24.967006] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 24.968185] Call trace: [ 24.968394] dump_backtrace.part.6+0xdc/0xe8 [ 24.968901] show_stack+0x18/0x68 [ 24.969271] sched_show_task+0x154/0x198 [ 24.969726] rcu_sched_clock_irq+0xd10/0xdd8 [ 24.970220] update_process_times+0x9c/0xd0 [ 24.974520] tick_sched_handle.isra.19+0x34/0x58 [ 24.978339] tick_sched_timer+0x4c/0xa8 [ 24.982104] hrtimer_run_queues+0x120/0x1b8 [ 24.985860] hrtimer_interrupt+0xd8/0x238 [ 24.989613] arch_timer_handler_phys+0x2c/0x50 [ 24.993374] handle_percpu_devid_irq+0x84/0x138 [ 24.997139] generic_handle_domain_irq+0x2c/0x48 [ 25.000922] gic_handle_irq+0xa4/0xc0 [ 25.004699] call_on_irq_stack+0x2c/0x58 [ 25.008441] do_interrupt_handler+0x80/0x88 [ 25.012171] el1_interrupt+0x38/0x70 [ 25.015911] el1h_64_irq_handler+0x18/0x28 [ 25.019639] el1h_64_irq+0x64/0x68 [ 25.023315] xas_load+0x60/0x78 [ 25.026957] xas_find+0x190/0x1d8 [ 25.030564] find_lock_entries+0x7c/0x280 [ 25.034154] truncate_inode_pages_range+0xa8/0x490 [ 25.037724] truncate_inode_pages_final+0x58/0x78 [ 25.041242] evict+0x144/0x150 [ 25.044715] iput+0x128/0x190 [ 25.048139] do_unlinkat+0x17c/0x2a8 [ 25.051532] arm64_sys_unlinkat+0x40/0x88 [ 25.054900] invoke_syscall+0x44/0x100 [ 25.058233] el0_svc_common.constprop.3+0x6c/0xf0 [ 25.061558] do_el0_svc+0x24/0x88 [ 25.064843] el0_svc+0x20/0x60 [ 25.068090] el0t_64_sync_handler+0x90/0xb8 [ 25.071323] el0t_64_sync+0x170/0x174 [ 31.709550] VDDIO_BOOT: disabling [ 88.089511] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 88.092548] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 88.095444] (detected by 1, t=21033 jiffies, g=-435, q=1036) [ 88.098209] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 88.101407] Call trace: [ 88.103959] dump_backtrace.part.6+0xdc/0xe8 [ 88.106570] show_stack+0x18/0x68 [ 88.109183] sched_show_task+0x154/0x198 [ 88.111688] rcu_sched_clock_irq+0xd10/0xdd8 [ 88.114106] update_process_times+0x9c/0xd0 [ 88.116533] tick_sched_handle.isra.19+0x34/0x58 [ 88.118986] tick_sched_timer+0x4c/0xa8 [ 88.121442] hrtimer_run_queues+0x120/0x1b8 [ 88.123928] hrtimer_interrupt+0xd8/0x238 [ 88.126407] arch_timer_handler_phys+0x2c/0x50 [ 88.128887] handle_percpu_devid_irq+0x84/0x138 [ 88.131364] generic_handle_domain_irq+0x2c/0x48 [ 88.133840] gic_handle_irq+0xa4/0xc0 [ 88.136302] call_on_irq_stack+0x2c/0x58 [ 88.138781] do_interrupt_handler+0x80/0x88 [ 88.141274] el1_interrupt+0x38/0x70 [ 88.143756] el1h_64_irq_handler+0x18/0x28 [ 88.146217] el1h_64_irq+0x64/0x68 [ 88.148616] xas_descend+0x4/0x88 [ 88.150965] xas_find+0x190/0x1d8 [ 88.153297] find_lock_entries+0x7c/0x280 [ 88.155643] truncate_inode_pages_range+0xa8/0x490 [ 88.158007] truncate_inode_pages_final+0x58/0x78 [ 88.160327] evict+0x144/0x150 [ 88.162622] iput+0x128/0x190 [ 88.164885] do_unlinkat+0x17c/0x2a8 [ 88.167107] __arm64_sys_unlinkat+0x40/0x88 [ 88.169303] invoke_syscall+0x44/0x100 [ 88.171494] el0_svc_common.constprop.3+0x6c/0xf0 [ 88.173702] do_el0_svc+0x24/0x88 [ 88.175901] el0_svc+0x20/0x60 [ 88.178089] el0t_64_sync_handler+0x90/0xb8 [ 88.180290] el0t_64_sync+0x170/0x174

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.19.0-rc6-00575-g00b9cba1cc96 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f9197772 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x56a65040 MEMRESERVE=0x56a64040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3efb40-0x7f3f1fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000056a64fff] [ 0.000000] node 0: [mem 0x0000000056a65000-0x0000000056a65fff] [ 0.000000] node 0: [mem 0x0000000056a66000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s44520 r8192 d29208 u81920 [ 0.000000] pcpu-alloc: s44520 r8192 d29208 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc6-00575-g00b9cba1cc96 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro debug cpufreq.default_governor=performance console=tty1 console=ttyA0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc6-00575-g00b9cba1cc96", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1664852K/2097152K available (16000K kernel code, 3394K rwdata, 9064K rodata, 6976K init, 586K bss, 170156K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001314] Console: colour dummy device 80x25 [ 0.001886] printk: console [tty1] enabled [ 0.001979] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002005] pid_max: default: 32768 minimum: 301 [ 0.002073] LSM: Security Framework initializing [ 0.002184] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002213] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003485] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003526] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003598] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003735] rcu: Hierarchical SRCU implementation. [ 0.006327] Remapping and enabling EFI services. [ 0.006713] smp: Bringing up secondary CPUs ... [ 0.007235] Detected VIPT I-cache on CPU1 [ 0.007309] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007907] Detected VIPT I-cache on CPU2 [ 0.007964] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.008531] Detected VIPT I-cache on CPU3 [ 0.008588] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.008671] smp: Brought up 1 node, 4 CPUs [ 0.008741] SMP: Total of 4 processors activated. [ 0.008754] CPU features: detected: 32-bit EL0 Support [ 0.008764] CPU features: detected: 32-bit EL1 Support [ 0.008777] CPU features: detected: CRC32 instructions [ 0.009205] CPU: All CPU(s) started at EL2 [ 0.009239] alternatives: patching kernel code [ 0.010812] devtmpfs: initialized [ 0.017108] KASLR enabled [ 0.017311] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017349] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023738] pinctrl core: initialized pinctrl subsystem [ 0.024815] SMBIOS 3.0 present. [ 0.024860] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.025417] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026714] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.026920] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.027069] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.027159] audit: initializing netlink subsys (disabled) [ 0.027367] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.028770] thermal_sys: Registered thermal governor 'step_wise' [ 0.028785] thermal_sys: Registered thermal governor 'power_allocator' [ 0.029055] cpuidle: using governor menu [ 0.029382] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.029506] ASID allocator initialised with 32768 entries [ 0.029524] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB [ 0.029538] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB [ 0.029552] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB [ 0.029565] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB [ 0.031342] Serial: AMBA PL011 UART driver [ 0.051015] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.053417] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.054232] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.066327] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.066365] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.066379] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.066394] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.067856] ACPI: Interpreter disabled. [ 0.070839] iommu: Default domain type: Translated [ 0.070873] iommu: DMA domain TLB invalidation policy: strict mode [ 0.071170] SCSI subsystem initialized [ 0.071343] libata version 3.00 loaded. [ 0.071591] usbcore: registered new interface driver usbfs [ 0.071637] usbcore: registered new interface driver hub [ 0.071678] usbcore: registered new device driver usb [ 0.072830] pps_core: LinuxPPS API ver. 1 registered [ 0.072850] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.072876] PTP clock support registered [ 0.073010] EDAC MC: Ver: 3.0.0 [ 0.074081] Registered efivars operations [ 0.075163] FPGA manager framework [ 0.075283] Advanced Linux Sound Architecture Driver Initialized. [ 0.076054] vgaarb: loaded [ 0.076568] clocksource: Switched to clocksource arch_sys_counter [ 0.076843] VFS: Disk quotas dquot_6.6.0 [ 0.076907] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.077089] pnp: PnP ACPI: disabled [ 0.082404] NET: Registered PF_INET protocol family [ 0.082588] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.084125] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.084227] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.084256] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.084376] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.084629] TCP: Hash tables configured (established 16384 bind 16384) [ 0.084771] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.084829] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.085007] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.085412] RPC: Registered named UNIX socket transport module. [ 0.085440] RPC: Registered udp transport module. [ 0.085452] RPC: Registered tcp transport module. [ 0.085462] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.085479] PCI: CLS 0 bytes, default 64 [ 0.085687] Unpacking initramfs... [ 0.097378] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.097971] kvm [1]: IPA Size Limit: 40 bits [ 0.099760] kvm [1]: vgic interrupt IRQ9 [ 0.099904] kvm [1]: Hyp mode initialized successfully [ 0.101391] Initialise system trusted keyrings [ 0.101698] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.108095] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.108910] NFS: Registering the id_resolver key type [ 0.108966] Key type id_resolver registered [ 0.108978] Key type id_legacy registered [ 0.109093] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.109111] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.109354] 9p: Installing v9fs 9p2000 file system support [ 0.146111] Key type asymmetric registered [ 0.146157] Asymmetric key parser 'x509' registered [ 0.146270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.146298] io scheduler mq-deadline registered [ 0.146310] io scheduler kyber registered [ 0.149519] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.168100] EINJ: ACPI disabled. [ 0.195951] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.207294] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.211394] SuperH (H)SCI(F) driver initialized [ 0.212304] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart [ 0.340525] printk: console [ttyAML0] enabled [ 0.341990] msm_serial: driver initialized [ 0.353278] loop: module loaded [ 0.355078] megasas: 07.719.03.00-rc1 [ 0.364843] tun: Universal TUN/TAP device driver, 1.6 [ 0.366625] thunder_xcv, ver 1.0 [ 0.366727] thunder_bgx, ver 1.0 [ 0.366782] nicpf, ver 1.0 [ 0.370121] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.370347] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.371069] hclge is initializing [ 0.371356] e1000: Intel(R) PRO/1000 Network Driver [ 0.371895] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.372677] e1000e: Intel(R) PRO/1000 Network Driver [ 0.373128] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.373894] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.374426] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.375134] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.375785] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.377493] sky2: driver version 1.30 [ 0.380412] VFIO - User Level meta-driver version: 0.3 [ 0.385939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.386083] ehci-pci: EHCI PCI platform driver [ 0.386675] ehci-platform: EHCI generic platform driver [ 0.387522] ehci-orion: EHCI orion driver [ 0.387926] ehci-exynos: EHCI Exynos driver [ 0.388386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.388905] ohci-pci: OHCI PCI platform driver [ 0.389461] ohci-platform: OHCI generic platform driver [ 0.390288] ohci-exynos: OHCI Exynos driver [ 0.391614] usbcore: registered new interface driver usb-storage [ 0.397917] i2c_dev: i2c /dev entries driver [ 0.405411] Freeing initrd memory: 30848K [ 0.410936] sdhci: Secure Digital Host Controller Interface driver [ 0.411036] sdhci: Copyright(c) Pierre Ossman [ 0.412739] Synopsys Designware Multimedia Card Interface Driver [ 0.414556] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.414633] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.419365] ledtrig-cpu: registered to indicate activity on CPUs [ 0.420723] efifb: probing for efifb [ 0.420908] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.421267] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.421966] efifb: scrolling: redraw [ 0.422374] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.432666] Console: switching to colour frame buffer device 240x67 [ 0.441572] fb0: EFI VGA frame buffer device [ 0.442811] meson-sm: secure-monitor enabled [ 0.445041] usbcore: registered new interface driver usbhid [ 0.445142] usbhid: USB HID core driver [ 0.447211] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.448322] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.448471] mmc0: error -22 whilst initialising SDIO card [ 0.458349] NET: Registered PF_PACKET protocol family [ 0.458595] 9pnet: Installing 9P2000 support [ 0.458885] Key type dns_resolver registered [ 0.459882] registered taskstats version 1 [ 0.459978] Loading compiled-in X.509 certificates [ 0.484043] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.484147] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 0.994801] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 0.995262] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 0.996150] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 1.000012] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.000132] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.001144] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports [ 1.001642] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 1.002783] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 [ 1.004184] hub 1-0:1.0: USB hub found [ 1.004290] hub 1-0:1.0: 2 ports detected [ 1.009956] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 1.010446] meson-gx-mmc d0072000.mmc: Got CD GPIO domain-0 init dvfs: 4 [ 1.025706] ALSA device list: [ 1.025782] No soundcards found. [ 1.039947] Freeing unused kernel memory: 6976K [ 1.040127] Run /init as init process [ 1.040293] with arguments: [ 1.040677] /init [ 1.040883] with environment: [ 1.041247] HOME=/ [ 1.041514] TERM=linux [ 1.041829] BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc6-00575-g00b9cba1cc96 Loading, please wait...

• '[' -z ]
• BOOT=local
• '[' -n ]
• '[' '=' none ]
• resume=
• mount -t tmpfs -o 'nodev,noexec,nosuid,size=10%,mode=0755' tmpfs /run
• mkdir -m 0700 /run/initramfs
• '[' -n /run/initramfs/initramfs.debug ]
• exec [ 1.077513] mmc1: new high speed SDHC card at address aaaa [ 1.080154] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 1.085413] mmcblk1: p1 p2 [ 1.264626] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.477023] mmc0: Card stuck being busy! __mmc_poll_for_busy [ 1.484072] hub 1-1:1.0: USB hub found [ 1.486982] hub 1-1:1.0: 4 ports detected [ 1.747023] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.749266] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.751039] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 1.751382] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.756273] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.758452] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.760397] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.760407] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.760412] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.760418] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.760423] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.760554] Console: switching [ 1.760594] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.760602] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.760607] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.760706] to colour dummy device 80x25 [ 1.796710] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.799555] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.801616] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.804220] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.804499] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.813846] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 1.815146] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.828704] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.828914] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.829780] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.840633] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 1.853285] lima d00c0000.gpu: bus rate = 166666667 [ 1.853345] lima d00c0000.gpu: mod rate = 24000000 [ 1.853873] lima d00c0000.gpu: error -ENODEV: dev_pm_opp_set_regulators: no regulator (mali) found [ 1.857500] lima d00c0000.gpu: Failed to register cooling device [ 1.857990] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 [ 2.030759] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.089199] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.096701] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.098505] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.156873] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.158568] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.160656] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.162880] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.433307] Console: switching to colour frame buffer device 240x67 [ 2.462695] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 2.896565] raid6: neonx8 gen() 2702 MB/s [ 2.964562] raid6: neonx4 gen() 2649 MB/s [ 3.032584] raid6: neonx2 gen() 2542 MB/s [ 3.100573] raid6: neonx1 gen() 1992 MB/s [ 3.168591] raid6: int64x8 gen() 1433 MB/s [ 3.236570] raid6: int64x4 gen() 1996 MB/s [ 3.304560] raid6: int64x2 gen() 1672 MB/s [ 3.372568] raid6: int64x1 gen() 1247 MB/s [ 3.372637] raid6: using algorithm neonx8 gen() 2702 MB/s [ 3.440564] raid6: .... xor() 1952 MB/s, rmw enabled [ 3.440637] raid6: using neon recovery algorithm [ 3.442417] xor: measuring software checksum speed [ 3.445549] 8regs : 3309 MB/sec [ 3.448625] 32regs : 3309 MB/sec [ 3.452056] arm64_neon : 2925 MB/sec [ 3.452121] xor: using function: 32regs (3309 MB/sec) [ 3.475365] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 3.607316] BTRFS: device label writable devid 1 transid 592 /dev/mmcblk1p2 scanned by btrfs (232) [ 3.727747] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 3.728082] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 3.728862] BTRFS info (device mmcblk1p2): has skinny extents [ 3.750068] BTRFS info (device mmcblk1p2): enabling ssd optimizations

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.19.0-rc7-00752-gd0dcc148ba0d (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f9197772 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x56a65040 MEMRESERVE=0x56a64040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3edb40-0x7f3effff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000056a64fff] [ 0.000000] node 0: [mem 0x0000000056a65000-0x0000000056a65fff] [ 0.000000] node 0: [mem 0x0000000056a66000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s44520 r8192 d29208 u81920 [ 0.000000] pcpu-alloc: s44520 r8192 d29208 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc7-00752-gd0dcc148ba0d root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro debug=vc systemd.log_level=debug systemd.log_target=console console=0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc7-00752-gd0dcc148ba0d", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1664844K/2097152K available (16000K kernel code, 3394K rwdata, 9064K rodata, 6976K init, 586K bss, 170164K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001311] Console: colour dummy device 80x25 [ 0.001880] printk: console [tty1] enabled [ 0.001975] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001999] pid_max: default: 32768 minimum: 301 [ 0.002067] LSM: Security Framework initializing [ 0.002177] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002207] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003489] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003530] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003603] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003737] rcu: Hierarchical SRCU implementation. [ 0.006318] Remapping and enabling EFI services. [ 0.006701] smp: Bringing up secondary CPUs ... [ 0.007223] Detected VIPT I-cache on CPU1 [ 0.007296] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007888] Detected VIPT I-cache on CPU2 [ 0.007946] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.008529] Detected VIPT I-cache on CPU3 [ 0.008587] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.008661] smp: Brought up 1 node, 4 CPUs [ 0.008729] SMP: Total of 4 processors activated. [ 0.008741] CPU features: detected: 32-bit EL0 Support [ 0.008752] CPU features: detected: 32-bit EL1 Support [ 0.008764] CPU features: detected: CRC32 instructions [ 0.009198] CPU: All CPU(s) started at EL2 [ 0.009232] alternatives: patching kernel code [ 0.010799] devtmpfs: initialized [ 0.017054] KASLR enabled [ 0.017254] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017291] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023704] pinctrl core: initialized pinctrl subsystem [ 0.024778] SMBIOS 3.0 present. [ 0.024825] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.025384] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.026741] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.026953] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.027108] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.027201] audit: initializing netlink subsys (disabled) [ 0.027405] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.028803] thermal_sys: Registered thermal governor 'step_wise' [ 0.028818] thermal_sys: Registered thermal governor 'power_allocator' [ 0.029092] cpuidle: using governor menu [ 0.029448] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.029572] ASID allocator initialised with 32768 entries [ 0.029589] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB [ 0.029603] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB [ 0.029617] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB [ 0.029630] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB [ 0.031394] Serial: AMBA PL011 UART driver [ 0.050985] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.053386] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.054218] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.066199] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.066234] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.066249] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.066263] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.067747] ACPI: Interpreter disabled. [ 0.070691] iommu: Default domain type: Translated [ 0.070723] iommu: DMA domain TLB invalidation policy: strict mode [ 0.071027] SCSI subsystem initialized [ 0.071194] libata version 3.00 loaded. [ 0.071448] usbcore: registered new interface driver usbfs [ 0.071494] usbcore: registered new interface driver hub [ 0.071534] usbcore: registered new device driver usb [ 0.072631] pps_core: LinuxPPS API ver. 1 registered [ 0.072649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.072675] PTP clock support registered [ 0.072866] EDAC MC: Ver: 3.0.0 [ 0.073933] Registered efivars operations [ 0.075034] FPGA manager framework [ 0.075156] Advanced Linux Sound Architecture Driver Initialized. [ 0.075916] vgaarb: loaded [ 0.076461] clocksource: Switched to clocksource arch_sys_counter [ 0.076700] VFS: Disk quotas dquot_6.6.0 [ 0.076796] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.076992] pnp: PnP ACPI: disabled [ 0.082311] NET: Registered PF_INET protocol family [ 0.082495] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.084033] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.084133] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.084163] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.084283] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.084526] TCP: Hash tables configured (established 16384 bind 16384) [ 0.084664] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.084722] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.084898] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.085311] RPC: Registered named UNIX socket transport module. [ 0.085343] RPC: Registered udp transport module. [ 0.085353] RPC: Registered tcp transport module. [ 0.085363] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.085381] PCI: CLS 0 bytes, default 64 [ 0.085621] Unpacking initramfs... [ 0.097264] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.097857] kvm [1]: IPA Size Limit: 40 bits [ 0.099638] kvm [1]: vgic interrupt IRQ9 [ 0.099770] kvm [1]: Hyp mode initialized successfully [ 0.101244] Initialise system trusted keyrings [ 0.101529] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.107824] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.108636] NFS: Registering the id_resolver key type [ 0.108696] Key type id_resolver registered [ 0.108708] Key type id_legacy registered [ 0.108833] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.108857] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.109056] 9p: Installing v9fs 9p2000 file system support [ 0.145408] Key type asymmetric registered [ 0.145454] Asymmetric key parser 'x509' registered [ 0.145564] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.145587] io scheduler mq-deadline registered [ 0.145599] io scheduler kyber registered [ 0.148504] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.166951] EINJ: ACPI disabled. [ 0.194215] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.205440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.209518] SuperH (H)SCI(F) driver initialized [ 0.210496] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart [ 0.338885] printk: console [ttyAML0] enabled [ 0.340263] msm_serial: driver initialized [ 0.351490] loop: module loaded [ 0.353338] megasas: 07.719.03.00-rc1 [ 0.362697] tun: Universal TUN/TAP device driver, 1.6 [ 0.364402] thunder_xcv, ver 1.0 [ 0.364569] thunder_bgx, ver 1.0 [ 0.364634] nicpf, ver 1.0 [ 0.367299] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.367522] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.368236] hclge is initializing [ 0.368549] e1000: Intel(R) PRO/1000 Network Driver [ 0.369069] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.369815] e1000e: Intel(R) PRO/1000 Network Driver [ 0.370301] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.371073] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.371600] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.372334] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.372988] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.374624] sky2: driver version 1.30 [ 0.377006] VFIO - User Level meta-driver version: 0.3 [ 0.382424] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.382569] ehci-pci: EHCI PCI platform driver [ 0.383171] ehci-platform: EHCI generic platform driver [ 0.384032] ehci-orion: EHCI orion driver [ 0.384480] ehci-exynos: EHCI Exynos driver [ 0.384932] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.385364] ohci-pci: OHCI PCI platform driver [ 0.385930] ohci-platform: OHCI generic platform driver [ 0.386762] ohci-exynos: OHCI Exynos driver [ 0.388142] usbcore: registered new interface driver usb-storage [ 0.393720] i2c_dev: i2c /dev entries driver [ 0.405262] Freeing initrd memory: 30848K [ 0.408571] sdhci: Secure Digital Host Controller Interface driver [ 0.408668] sdhci: Copyright(c) Pierre Ossman [ 0.410335] Synopsys Designware Multimedia Card Interface Driver [ 0.412063] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.412152] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.416956] ledtrig-cpu: registered to indicate activity on CPUs [ 0.418261] efifb: probing for efifb [ 0.418444] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.418804] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.419502] efifb: scrolling: redraw [ 0.419910] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.430223] Console: switching to colour frame buffer device 240x67 [ 0.439143] fb0: EFI VGA frame buffer device [ 0.440416] meson-sm: secure-monitor enabled [ 0.442542] usbcore: registered new interface driver usbhid [ 0.442643] usbhid: USB HID core driver [ 0.444668] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.445858] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.446006] mmc0: error -22 whilst initialising SDIO card [ 0.455627] NET: Registered PF_PACKET protocol family [ 0.455870] 9pnet: Installing 9P2000 support [ 0.456162] Key type dns_resolver registered [ 0.457258] registered taskstats version 1 [ 0.457354] Loading compiled-in X.509 certificates [ 0.481473] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.481575] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 0.994701] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 0.995159] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 0.996051] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 0.999931] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.000051] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.001066] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports [ 1.001561] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 1.002703] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000 [ 1.004114] hub 1-0:1.0: USB hub found [ 1.004220] hub 1-0:1.0: 2 ports detected [ 1.009859] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 1.010340] meson-gx-mmc d0072000.mmc: Got CD GPIO domain-0 init dvfs: 4 [ 1.025186] ALSA device list: [ 1.025258] No soundcards found. [ 1.040142] Freeing unused kernel memory: 6976K [ 1.040364] Run /init as init process [ 1.040549] with arguments: [ 1.040829] /init [ 1.041084] with environment: [ 1.041450] HOME=/ [ 1.041715] TERM=linux [ 1.042031] BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc7-00752-gd0dcc148ba0d Loading, please wait...

• '[' -z ]
• BOOT=local
• '[' -n ]
• '[' '=' none ]
• resume=
• mount -t tmpfs -o 'nodev,noexec,nosuid,size=10%,mode=0755' tmpfs /run [ 1.078618] mmc1: new high speed SDHC card at address aaaa
• mkdir -m 0700 /run/initramfs [ 1.081278] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
• '[' -n ]
• maybe_break top
• run_scripts /scripts/init-top
• initdir=/scripts/init-top
• '[' '!' -d /scripts/init-top ]
• shift
• . /scripts/init-top/ORDER
• /scripts/init-top/all_generic_ide [ 1.086702] mmcblk1: p1 p2
• '[' -e /conf/param.conf ]
• /scripts/init-top/blacklist
• '[' -e /conf/param.conf ]
• /scripts/init-top/udev Starting version 249.11-0ubuntu3.4 [ 1.260523] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.486703] hub 1-1:1.0: USB hub found [ 1.489065] hub 1-1:1.0: 4 ports detected [ 1.492959] mmc0: Card stuck being busy! __mmc_poll_for_busy [ 1.744137] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.746533] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.748714] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.754384] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.757217] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.759040] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 1.765041] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.767171] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.769864] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.771768] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.773858] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.778306] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.780221] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.782209] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.799686] Console: switching to colour dummy device 80x25 [ 1.829129] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.831907] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.832176] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.836507] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 1.838946] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.839131] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.840018] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.844575] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.847333] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.851033] lima d00c0000.gpu: bus rate = 166666667 [ 1.851094] lima d00c0000.gpu: mod rate = 24000000 [ 1.851669] lima d00c0000.gpu: error -ENODEV: dev_pm_opp_set_regulators: no regulator (mali) found [ 1.855393] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.858175] lima d00c0000.gpu: Failed to register cooling device [ 1.858430] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 1.858584] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 [ 2.031198] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.093659] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.101556] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.103859] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.165198] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.167716] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.170419] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.172725] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.497876] Console: switching to colour frame buffer device 240x67 [ 2.592069] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
• '[' -e /conf/param.conf ]
• /scripts/init-top/framebuffer
• '[' -e /conf/param.conf ]
• /scripts/init-top/console_setup
• '[' -e /conf/param.conf ]
• maybe_break modules
• '[' n '!=' y ]
• log_begin_msg 'Loading essential drivers'
• _log_msg 'Begin: %s ... ' 'Loading essential drivers'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Loading essential drivers' Begin: Loading essential drivers ... + return 0
• '[' -n ]
• load_modules
• '[' -e /conf/modules ]
• read -r m
• '[' -z linear ]
• printf '%.1s' linear
• com=l
• '[' l '=' '#' ]
• modprobe linear
• read -r m
• '[' -z multipath ]
• printf '%.1s' multipath
• com=m
• '[' m '=' '#' ]
• modprobe multipath
• read -r m
• '[' -z raid0 ]
• printf '%.1s' raid0
• com=r
• '[' r '=' '#' ]
• modprobe raid0
• read -r m
• '[' -z raid1 ]
• printf '%.1s' raid1
• com=r
• '[' r '=' '#' ]
• modprobe raid1
• read -r m
• '[' -z raid456 ]
• printf '%.1s' raid456
• com=r
• '[' r '=' '#' ]
• modprobe raid456
• read -r m
• '[' -z raid5 ]
• printf '%.1s' raid5
• com=r
• '[' r '=' '#' ]
• modprobe raid5
• read -r m
• '[' -z raid6 ]
• printf '%.1s' raid6
• com=r
• '[' r '=' '#' ]
• modprobe raid6
• read -r m
• '[' -z raid10 ]
• printf '%.1s' raid10
• com=r
• '[' r '=' '#' ]
• modprobe raid10
• read -r m
• '[' -z efivars ]
• printf '%.1s' efivars
• com=e
• '[' e '=' '#' ]
• modprobe efivars
• read -r m
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• _uptime
• local uptime
• cat /proc/uptime
• uptime='2.98 7.16'
• uptime=2
• echo 2
• starttime=2
• starttime=3
• export starttime
• maybe_break premount
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-premount' Begin: Running /scripts/init-premount ... + return 0
• run_scripts /scripts/init-premount
• initdir=/scripts/init-premount
• '[' '!' -d /scripts/init-premount ]
• shift
• . /scripts/init-premount/ORDER
• /scripts/init-premount/plymouth
• '[' -e /conf/param.conf ]
• /scripts/init-premount/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• maybe_break mount
• log_begin_msg 'Mounting root file system'
• _log_msg 'Begin: %s ... ' 'Mounting root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Mounting root file system' Begin: Mounting root file system ... + return 0
• . /scripts/local
• . /scripts/nfs
• . /scripts/local
• parse_numeric 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• return
• maybe_break mountroot
• mount_top
• local_top
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-top'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-top'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-top' Begin: Running /scripts/local-top ... + return 0
• run_scripts /scripts/local-top
• initdir=/scripts/local-top
• '[' '!' -d /scripts/local-top ]
• shift
• . /scripts/local-top/ORDER
• /scripts/local-top/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-top/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-top/lvm2
• '[' -e /conf/param.conf ]
• /scripts/local-top/cryptroot
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_top_used=yes
• mount_premount
• local_premount
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-premount' Begin: Running /scripts/local-premount ... + return 0
• run_scripts /scripts/local-premount
• initdir=/scripts/local-premount
• '[' '!' -d /scripts/local-premount ]
• shift
• . /scripts/local-premount/ORDER
• /scripts/local-premount/btrfs [ 3.156490] raid6: neonx8 gen() 2579 MB/s [ 3.224456] raid6: neonx4 gen() 2287 MB/s [ 3.292463] raid6: neonx2 gen() 2574 MB/s [ 3.360460] raid6: neonx1 gen() 1991 MB/s [ 3.428456] raid6: int64x8 gen() 1434 MB/s [ 3.496457] raid6: int64x4 gen() 1981 MB/s [ 3.564463] raid6: int64x2 gen() 1673 MB/s [ 3.632453] raid6: int64x1 gen() 1246 MB/s [ 3.632518] raid6: using algorithm neonx8 gen() 2579 MB/s [ 3.700453] raid6: .... xor() 1954 MB/s, rmw enabled [ 3.700527] raid6: using neon recovery algorithm [ 3.702310] xor: measuring software checksum speed [ 3.705442] 8regs : 3309 MB/sec [ 3.708523] 32regs : 3309 MB/sec [ 3.711955] arm64_neon : 2925 MB/sec [ 3.712019] xor: using function: 32regs (3309 MB/sec) [ 3.735341] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no Scanning for Btrfs filesystems [ 3.900774] BTRFS: device label writable devid 1 transid 722 /dev/mmcblk1p2 scanned by btrfs (235)
• '[' -e /conf/param.conf ]
• /scripts/local-premount/fixrtc
• '[' -e /conf/param.conf ]
• /scripts/local-premount/ntfs_3g
• '[' -e /conf/param.conf ]
• /scripts/local-premount/resume
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=yes
• mountroot
• local_mount_root
• local_top
• '[' yes '!=' yes ]
• local_top_used=yes
• '[' -z 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• local_device_setup 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 'root file system'
• local 'dev_id=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'name=root file system'
• local 'may_panic=true'
• local real_dev
• local time_elapsed
• local count
• local 'slumber=30'
• slumber=30
• '[' 0 -gt 30 ]
• wait-for-root 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 30
• FSTYPE=btrfs
• '[' -n ]
• '[' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• '[' f576022f-9541-4435-adde-dc39f8ea1fa4 '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• DEV=/dev/mmcblk1p2
• ROOT=/dev/mmcblk1p2
• '[' -z ]
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• FSTYPE=btrfs
• local_premount
• '[' yes '!=' yes ]
• local_premount_used=yes
• '[' y '=' y ]
• '[' -z ]
• roflag=-r
• checkfs /dev/mmcblk1p2 root btrfs
• _checkfs_once /dev/mmcblk1p2 root btrfs
• DEV=/dev/mmcblk1p2
• NAME=root
• TYPE=btrfs
• '[' root '=' / ]
• FSCK_LOGFILE=/run/initramfs/fsck.log
• FSCK_STAMPFILE=/run/initramfs/fsck-root
• '[' btrfs '=' auto ]
• FSCKCODE=0
• '[' -z btrfs ]
• command -v fsck
• '[' n '=' y ]
• '[' n '=' y ]
• force=
• '[' '=' y ]
• '[' '=' n ]
• fix=-a
• spinner=
• '[' -z y ]
• '[' n '=' n ]
• log_begin_msg 'Will now check root file system'
• _log_msg 'Begin: %s ... ' 'Will now check root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Will now check root file system' Begin: Will now check root file system ... + return 0
• logsave -a -s /run/initramfs/fsck.log fsck -a -V -t btrfs /dev/mmcblk1p2 fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2
• FSCKCODE=0
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• '[' 0 -eq 32 ]
• '[' 0 -eq 4 ]
• '[' 0 -gt 1 ]
• true
• return 0
• mount -r -t btrfs /dev/mmcblk1p2 /root [ 4.047075] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 4.047446] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 4.048160] BTRFS info (device mmcblk1p2): has skinny extents [ 4.071237] BTRFS info (device mmcblk1p2): enabling ssd optimizations
• mountroot_status=0
• '[' ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• read_fstab_entry /usr
• found=1
• '[' -f /root/etc/fstab ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' / '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' /boot/firmware '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• return 1
• mount_bottom
• local_bottom
• '[' yes '=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-bottom' Begin: Running /scripts/local-bottom ... + return 0
• run_scripts /scripts/local-bottom
• initdir=/scripts/local-bottom
• '[' '!' -d /scripts/local-bottom ]
• shift
• . /scripts/local-bottom/ORDER
• /scripts/local-bottom/cryptgnupg-sc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptroot
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/mdadm
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/ntfs_3g
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=no
• local_top_used=no
• nfs_bottom
• '[' '=' yes ]
• '[' '=' yes ]
• nfs_premount_used=no
• nfs_top_used=no
• local_bottom
• '[' no '=' yes ]
• '[' no '=' yes ]
• local_premount_used=no
• local_top_used=no
• maybe_break bottom
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-bottom' Begin: Running /scripts/init-bottom ... + return 0
• run_scripts /scripts/init-bottom
• initdir=/scripts/init-bottom
• '[' '!' -d /scripts/init-bottom ]
• shift
• . /scripts/init-bottom/ORDER
• /scripts/init-bottom/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/lvm2
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/overlayroot
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/udev
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/copymods
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/plymouth
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• mount -n -o move /run /root/run
• validate_init /sbin/init
• run-init -n /root /sbin/init
• validate_init /sbin/init
• run-init -n /root /sbin/init
• maybe_break init
• unset debug
• unset MODPROBE_OPTIONS
• unset DPKG_ARCH
• unset ROOTFLAGS
• unset ROOTFSTYPE
• unset ROOTDELAY
• unset ROOT
• unset IP
• unset IP6
• unset VLAN
• unset BOOT
• unset BOOTIF
• unset DEVICE
• unset UBIMTD
• unset blacklist
• unset break
• unset noresume
• unset panic
• unset quiet
• unset readonly
• unset resume
• unset resume_offset
• unset noresume
• unset fastboot
• unset forcefsck
• unset fsckfix
• unset starttime
• mount -n -o move /sys /root/sys
• mount -n -o move /proc /root/proc
• exec run-init /root /sbin/init [ 25.360449] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 25.360597] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 25.361300] (detected by 3, t=5252 jiffies, g=-263, q=1992 ncpus=4) [ 25.362031] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 25.363204] Call trace: [ 25.363412] dump_backtrace.part.6+0xdc/0xe8 [ 25.363920] show_stack+0x18/0x68 [ 25.364290] sched_show_task+0x154/0x198 [ 25.364746] rcu_sched_clock_irq+0xd60/0xe28 [ 25.365239] update_process_times+0x68/0x98 [ 25.365718] tick_sched_handle.isra.19+0x34/0x58 [ 25.366253] tick_sched_timer+0x4c/0xa8 [ 25.366685] hrtimer_run_queues+0x120/0x1b8 [ 25.367190] hrtimer_interrupt+0xd8/0x238 [ 25.367647] arch_timer_handler_phys+0x2c/0x50 [ 25.368161] handle_percpu_devid_irq+0x84/0x138 [ 25.368682] generic_handle_domain_irq+0x2c/0x48 [ 25.369213] gic_handle_irq+0xa4/0xc0 [ 25.369624] call_on_irq_stack+0x2c/0x58 [ 25.373221] do_interrupt_handler+0x80/0x88 [ 25.376356] el1_interrupt+0x38/0x70 [ 25.379449] el1h_64_irq_handler+0x18/0x28 [ 25.382510] el1h_64_irq+0x64/0x68 [ 25.385519] xas_load+0x60/0x78 [ 25.388486] xas_find+0x190/0x1d8 [ 25.391406] find_lock_entries+0x7c/0x2b8 [ 25.394299] truncate_inode_pages_range+0xa8/0x558 [ 25.397174] truncate_inode_pages_final+0x58/0x78 [ 25.399999] evict+0x144/0x150 [ 25.402774] iput+0x128/0x190 [ 25.405503] do_unlinkat+0x17c/0x2a8 [ 25.408202] arm64_sys_unlinkat+0x40/0x88 [ 25.410873] invoke_syscall+0x44/0x100 [ 25.413507] el0_svc_common.constprop.3+0x6c/0xf0 [ 25.416122] do_el0_svc+0x2c/0xb8 [ 25.418691] el0_svc+0x20/0x60 [ 25.421215] el0t_64_sync_handler+0x98/0xc0 [ 25.423716] el0t_64_sync+0x170/0x174

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.55-00365-g4aa6e752aa31 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]2 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x5706d040 MEMRESERVE=0x5706c040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3edc00-0x7f3effff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x000000005706cfff] [ 0.000000] node 0: [mem 0x000000005706d000-0x000000005706dfff] [ 0.000000] node 0: [mem 0x000000005706e000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s41368 r8192 d32360 u81920 [ 0.000000] pcpu-alloc: s41368 r8192 d32360 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro debug=vc systemd.log_level=debug systemd.log_target=console console=tty0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1668340K/2097152K available (15232K kernel code, 3080K rwdata, 8272K rodata, 6208K init, 502K bss, 166668K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001233] Console: colour dummy device 80x25 [ 0.001783] printk: console [tty1] enabled [ 0.001877] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001902] pid_max: default: 32768 minimum: 301 [ 0.001969] LSM: Security Framework initializing [ 0.002076] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002102] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003477] rcu: Hierarchical SRCU implementation. [ 0.006102] Remapping and enabling EFI services. [ 0.006469] smp: Bringing up secondary CPUs ... [ 0.006988] Detected VIPT I-cache on CPU1 [ 0.007058] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007629] Detected VIPT I-cache on CPU2 [ 0.007686] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.008287] Detected VIPT I-cache on CPU3 [ 0.008346] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.008427] smp: Brought up 1 node, 4 CPUs [ 0.008495] SMP: Total of 4 processors activated. [ 0.008506] CPU features: detected: 32-bit EL0 Support [ 0.008516] CPU features: detected: 32-bit EL1 Support [ 0.008529] CPU features: detected: CRC32 instructions [ 0.014688] CPU: All CPU(s) started at EL2 [ 0.014762] alternatives: patching kernel code [ 0.016291] devtmpfs: initialized [ 0.022173] KASLR enabled [ 0.022376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022412] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.028852] pinctrl core: initialized pinctrl subsystem [ 0.029813] SMBIOS 3.0 present. [ 0.029856] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.030419] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.031881] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.032062] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.032207] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.032313] audit: initializing netlink subsys (disabled) [ 0.032537] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 [ 0.033777] thermal_sys: Registered thermal governor 'step_wise' [ 0.033790] thermal_sys: Registered thermal governor 'power_allocator' [ 0.034049] cpuidle: using governor menu [ 0.034374] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.034496] ASID allocator initialised with 32768 entries [ 0.036141] Serial: AMBA PL011 UART driver [ 0.055488] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.057967] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.058743] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.069927] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.069963] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.069977] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.069990] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.070964] cryptd: max_cpu_qlen set to 1000 [ 0.073153] ACPI: Interpreter disabled. [ 0.075131] VDDIO_BOOT: supplied by VCC_3V3 [ 0.075810] iommu: Default domain type: Translated [ 0.075842] iommu: DMA domain TLB invalidation policy: strict mode [ 0.076134] vgaarb: loaded [ 0.076463] SCSI subsystem initialized [ 0.076644] libata version 3.00 loaded. [ 0.076864] usbcore: registered new interface driver usbfs [ 0.076913] usbcore: registered new interface driver hub [ 0.076952] usbcore: registered new device driver usb [ 0.077827] pps_core: LinuxPPS API ver. 1 registered [ 0.077844] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.077869] PTP clock support registered [ 0.077993] EDAC MC: Ver: 3.0.0 [ 0.078997] Registered efivars operations [ 0.080155] FPGA manager framework [ 0.080269] Advanced Linux Sound Architecture Driver Initialized. [ 0.081354] clocksource: Switched to clocksource arch_sys_counter [ 0.081538] VFS: Disk quotas dquot_6.6.0 [ 0.081598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.081779] pnp: PnP ACPI: disabled [ 0.086971] NET: Registered PF_INET protocol family [ 0.087147] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.088191] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.088254] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.088279] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.088398] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.088606] TCP: Hash tables configured (established 16384 bind 16384) [ 0.088739] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.088801] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.088964] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.089601] RPC: Registered named UNIX socket transport module. [ 0.089634] RPC: Registered udp transport module. [ 0.089644] RPC: Registered tcp transport module. [ 0.089654] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.089672] PCI: CLS 0 bytes, default 64 [ 0.089850] Unpacking initramfs... [ 0.101943] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.102415] kvm [1]: IPA Size Limit: 40 bits [ 0.103945] kvm [1]: vgic interrupt IRQ9 [ 0.104102] kvm [1]: Hyp mode initialized successfully [ 0.107842] Initialise system trusted keyrings [ 0.108102] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.114319] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.115099] NFS: Registering the id_resolver key type [ 0.115171] Key type id_resolver registered [ 0.115185] Key type id_legacy registered [ 0.115291] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.115313] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.115543] 9p: Installing v9fs 9p2000 file system support [ 0.151340] Key type asymmetric registered [ 0.151382] Asymmetric key parser 'x509' registered [ 0.151516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.151545] io scheduler mq-deadline registered [ 0.151557] io scheduler kyber registered [ 0.169983] EINJ: ACPI disabled. [ 0.190682] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.201551] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.205188] SuperH (H)SCI(F) driver initialized [ 0.206066] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 0.328239] printk: console [ttyAML0] enabled [ 0.329659] msm_serial: driver initialized [ 0.340542] loop: module loaded [ 0.342639] megasas: 07.717.02.00-rc1 [ 0.353701] tun: Universal TUN/TAP device driver, 1.6 [ 0.355278] thunder_xcv, ver 1.0 [ 0.355375] thunder_bgx, ver 1.0 [ 0.355441] nicpf, ver 1.0 [ 0.357933] hclge is initializing [ 0.357996] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.358528] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.359255] e1000: Intel(R) PRO/1000 Network Driver [ 0.359697] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.360451] e1000e: Intel(R) PRO/1000 Network Driver [ 0.360928] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.361730] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.362231] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.362947] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.363589] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.365022] sky2: driver version 1.30 [ 0.366918] VFIO - User Level meta-driver version: 0.3 [ 0.371205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.371346] ehci-pci: EHCI PCI platform driver [ 0.371938] ehci-platform: EHCI generic platform driver [ 0.372798] ehci-orion: EHCI orion driver [ 0.373208] ehci-exynos: EHCI Exynos driver [ 0.373674] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.374122] ohci-pci: OHCI PCI platform driver [ 0.374721] ohci-platform: OHCI generic platform driver [ 0.375561] ohci-exynos: OHCI Exynos driver [ 0.377156] usbcore: registered new interface driver usb-storage [ 0.384092] i2c_dev: i2c /dev entries driver [ 0.394516] sdhci: Secure Digital Host Controller Interface driver [ 0.394622] sdhci: Copyright(c) Pierre Ossman [ 0.396398] Synopsys Designware Multimedia Card Interface Driver [ 0.397869] Freeing initrd memory: 30104K [ 0.398399] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.398508] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.402389] ledtrig-cpu: registered to indicate activity on CPUs [ 0.403606] efifb: probing for efifb [ 0.403786] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.404147] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.404845] efifb: scrolling: redraw [ 0.405252] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.431237] Console: switching to colour frame buffer device 240x67 [ 0.431898] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.431910] mmc0: error -22 whilst initialising SDIO card [ 0.456449] fb0: EFI VGA frame buffer device [ 0.457617] meson-sm: secure-monitor enabled [ 0.459271] usbcore: registered new interface driver usbhid [ 0.459487] usbhid: USB HID core driver [ 0.461176] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.469996] NET: Registered PF_PACKET protocol family [ 0.470294] 9pnet: Installing 9P2000 support [ 0.470573] Key type dns_resolver registered [ 0.471440] Loading compiled-in X.509 certificates [ 0.491552] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.491711] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 1.023498] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 1.024002] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 1.024872] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 1.028584] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.028759] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.029804] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 1.030766] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xc9000000 [ 1.032110] hub 1-0:1.0: USB hub found [ 1.032261] hub 1-0:1.0: 2 ports detected [ 1.032758] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.033119] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.034058] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.034859] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.036276] hub 2-0:1.0: USB hub found [ 1.036407] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.041813] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 1.042294] meson-gx-mmc d0072000.mmc: Got CD GPIO domain-0 init dvfs: 4 [ 1.057142] ALSA device list: [ 1.057239] No soundcards found. [ 1.071979] Freeing unused kernel memory: 6208K [ 1.077427] Run /init as init process [ 1.077633] with arguments: [ 1.077769] /init [ 1.077861] with environment: [ 1.083255] HOME=/ [ 1.088099] TERM=linux [ 1.092295] BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31 Loading, please wait... [ 1.126677] mmc1: new high speed SDHC card at address aaaa [ 1.135183] mmcblk1: mmc1:aaaa SC16G 14.8 GiB

• '[' -z ]
• BOOT=local
• '[' -n ]
• '[' '=' none ]
• resume=
• mount -t tmpfs -o 'nodev,noexec,nosuid,size=10%,mode=0755' tmpfs /run
• mkdir -m 0700 /run/initramfs
• '[' -n ]
• maybe_break top
• run_scripts /scripts/init-top
• initdir=/scripts/init-top
• '[' '!' -d /scripts/init-top ]
• shift
• . /scripts/init-top/ORDER
• /scripts/init-top/all_generic_ide [ 1.150243] mmcblk1: p1 p2
• '[' -e /conf/param.conf ]
• /scripts/init-top/blacklist
• '[' -e /conf/param.conf ]
• /scripts/init-top/udev Starting version 249.11-0ubuntu3.4 [ 1.289426] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.483383] hub 1-1:1.0: USB hub found [ 1.488196] hub 1-1:1.0: 4 ports detected [ 1.759187] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.764115] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.768534] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.775838] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.780192] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.784295] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.788592] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.792923] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.797013] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.801211] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.805736] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.813292] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.813574] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.817501] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.821433] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.825649] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.829536] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.833885] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 1.836761] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 1.847913] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.853166] checking generic (7f807000 7e9000) vs hw (0 ffffffffffffffff) [ 1.857987] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.863019] fb0: switching to meson from EFI VGA [ 1.871472] Console: switching to colour dummy device 80x25 [ 1.872361] lima d00c0000.gpu: bus rate = 166666667 [ 1.872422] lima d00c0000.gpu: mod rate = 24000000 [ 1.873319] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 1.877012] lima d00c0000.gpu: Failed to register cooling device [ 1.880635] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0 [ 1.905495] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.909571] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.912658] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.915054] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1 [ 2.030719] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.053656] [drm] kms: can't enable cloning when we probably wanted to. [ 2.090120] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.097121] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.097585] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.158206] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.158834] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.159234] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.159457] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.229618] Console: switching to colour frame buffer device 240x67 [ 2.293494] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
• '[' -e /conf/param.conf ]
• /scripts/init-top/framebuffer
• '[' -e /conf/param.conf ]
• /scripts/init-top/console_setup
• '[' -e /conf/param.conf ]
• maybe_break modules
• '[' n '!=' y ]
• log_begin_msg 'Loading essential drivers'
• _log_msg 'Begin: %s ... ' 'Loading essential drivers'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Loading essential drivers' Begin: Loading essential drivers ... + return 0
• '[' -n ]
• load_modules
• '[' -e /conf/modules ]
• read -r m
• '[' -z linear ]
• printf '%.1s' linear
• com=l
• '[' l '=' '#' ]
• modprobe linear
• read -r m
• '[' -z multipath ]
• printf '%.1s' multipath
• com=m
• '[' m '=' '#' ]
• modprobe multipath
• read -r m
• '[' -z raid0 ]
• printf '%.1s' raid0
• com=r
• '[' r '=' '#' ]
• modprobe raid0
• read -r m
• '[' -z raid1 ]
• printf '%.1s' raid1
• com=r
• '[' r '=' '#' ]
• modprobe raid1
• read -r m
• '[' -z raid456 ]
• printf '%.1s' raid456
• com=r
• '[' r '=' '#' ]
• modprobe raid456
• read -r m
• '[' -z raid5 ]
• printf '%.1s' raid5
• com=r
• '[' r '=' '#' ]
• modprobe raid5
• read -r m
• '[' -z raid6 ]
• printf '%.1s' raid6
• com=r
• '[' r '=' '#' ]
• modprobe raid6
• read -r m
• '[' -z raid10 ]
• printf '%.1s' raid10
• com=r
• '[' r '=' '#' ]
• modprobe raid10
• read -r m
• '[' -z efivars ]
• printf '%.1s' efivars
• com=e
• '[' e '=' '#' ]
• modprobe efivars
• read -r m
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• _uptime
• local uptime
• cat /proc/uptime
• uptime='2.68 6.25'
• uptime=2
• echo 2
• starttime=2
• starttime=3
• export starttime
• maybe_break premount
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-premount' Begin: Running /scripts/init-premount ... + return 0
• run_scripts /scripts/init-premount
• initdir=/scripts/init-premount
• '[' '!' -d /scripts/init-premount ]
• shift
• . /scripts/init-premount/ORDER
• /scripts/init-premount/plymouth
• '[' -e /conf/param.conf ]
• /scripts/init-premount/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• maybe_break mount
• log_begin_msg 'Mounting root file system'
• _log_msg 'Begin: %s ... ' 'Mounting root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Mounting root file system' Begin: Mounting root file system ... + return 0
• . /scripts/local
• . /scripts/nfs
• . /scripts/local
• parse_numeric 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• return
• maybe_break mountroot
• mount_top
• local_top
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-top'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-top'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-top' Begin: Running /scripts/local-top ... + return 0
• run_scripts /scripts/local-top
• initdir=/scripts/local-top
• '[' '!' -d /scripts/local-top ]
• shift
• . /scripts/local-top/ORDER
• /scripts/local-top/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-top/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-top/lvm2
• '[' -e /conf/param.conf ]
• /scripts/local-top/cryptroot
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_top_used=yes
• mount_premount
• local_premount
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-premount' Begin: Running /scripts/local-premount ... + return 0
• run_scripts /scripts/local-premount
• initdir=/scripts/local-premount
• '[' '!' -d /scripts/local-premount ]
• shift
• . /scripts/local-premount/ORDER
• /scripts/local-premount/btrfs [ 2.861391] raid6: neonx8 gen() 2259 MB/s [ 2.929347] raid6: neonx8 xor() 1697 MB/s [ 2.997353] raid6: neonx4 gen() 2653 MB/s [ 3.065350] raid6: neonx4 xor() 1888 MB/s [ 3.133351] raid6: neonx2 gen() 2587 MB/s [ 3.201376] raid6: neonx2 xor() 1761 MB/s [ 3.269358] raid6: neonx1 gen() 2002 MB/s [ 3.337349] raid6: neonx1 xor() 1432 MB/s [ 3.405349] raid6: int64x8 gen() 1434 MB/s [ 3.473355] raid6: int64x8 xor() 890 MB/s [ 3.541360] raid6: int64x4 gen() 1998 MB/s [ 3.609353] raid6: int64x4 xor() 1000 MB/s [ 3.677352] raid6: int64x2 gen() 1671 MB/s [ 3.745355] raid6: int64x2 xor() 894 MB/s [ 3.813364] raid6: int64x1 gen() 1245 MB/s [ 3.881356] raid6: int64x1 xor() 633 MB/s [ 3.881443] raid6: using algorithm neonx4 gen() 2653 MB/s [ 3.881910] raid6: .... xor() 1888 MB/s, rmw enabled [ 3.882474] raid6: using neon recovery algorithm [ 3.885670] xor: measuring software checksum speed [ 3.889328] 8regs : 2793 MB/sec [ 3.892339] 32regs : 3434 MB/sec [ 3.895796] arm64_neon : 2931 MB/sec [ 3.895888] xor: using function: 32regs (3434 MB/sec) [ 3.919429] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no Scanning for Btrfs filesystems [ 4.070014] BTRFS: device label writable devid 1 transid 753 /dev/mmcblk1p2 scanned by btrfs (244)
• '[' -e /conf/param.conf ]
• /scripts/local-premount/fixrtc
• '[' -e /conf/param.conf ]
• /scripts/local-premount/ntfs_3g
• '[' -e /conf/param.conf ]
• /scripts/local-premount/resume
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=yes
• mountroot
• local_mount_root
• local_top
• '[' yes '!=' yes ]
• local_top_used=yes
• '[' -z 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• local_device_setup 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 'root file system'
• local 'dev_id=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'name=root file system'
• local 'may_panic=true'
• local real_dev
• local time_elapsed
• local count
• local 'slumber=30'
• slumber=30
• '[' 0 -gt 30 ]
• wait-for-root 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 30
• FSTYPE=btrfs
• '[' -n ]
• '[' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• '[' f576022f-9541-4435-adde-dc39f8ea1fa4 '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• DEV=/dev/mmcblk1p2
• ROOT=/dev/mmcblk1p2
• '[' -z ]
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• FSTYPE=btrfs
• local_premount
• '[' yes '!=' yes ]
• local_premount_used=yes
• '[' y '=' y ]
• '[' -z ]
• roflag=-r
• checkfs /dev/mmcblk1p2 root btrfs
• _checkfs_once /dev/mmcblk1p2 root btrfs
• DEV=/dev/mmcblk1p2
• NAME=root
• TYPE=btrfs
• '[' root '=' / ]
• FSCK_LOGFILE=/run/initramfs/fsck.log
• FSCK_STAMPFILE=/run/initramfs/fsck-root
• '[' btrfs '=' auto ]
• FSCKCODE=0
• '[' -z btrfs ]
• command -v fsck
• '[' n '=' y ]
• '[' n '=' y ]
• force=
• '[' '=' y ]
• '[' '=' n ]
• fix=-a
• spinner=
• '[' -z y ]
• '[' n '=' n ]
• log_begin_msg 'Will now check root file system'
• _log_msg 'Begin: %s ... ' 'Will now check root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Will now check root file system' Begin: Will now check root file system ... + return 0
• logsave -a -s /run/initramfs/fsck.log fsck -a -V -t btrfs /dev/mmcblk1p2 fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2
• FSCKCODE=0
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• '[' 0 -eq 32 ]
• '[' 0 -eq 4 ]
• '[' 0 -gt 1 ]
• true
• return 0
• mount -r -t btrfs /dev/mmcblk1p2 /root [ 4.242975] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 4.243404] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 4.244138] BTRFS info (device mmcblk1p2): has skinny extents [ 4.265534] BTRFS info (device mmcblk1p2): enabling ssd optimizations
• mountroot_status=0
• '[' ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• read_fstab_entry /usr
• found=1
• '[' -f /root/etc/fstab ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' / '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' /boot/firmware '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• return 1
• mount_bottom
• local_bottom
• '[' yes '=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-bottom' Begin: Running /scripts/local-bottom ... + return 0
• run_scripts /scripts/local-bottom
• initdir=/scripts/local-bottom
• '[' '!' -d /scripts/local-bottom ]
• shift
• . /scripts/local-bottom/ORDER
• /scripts/local-bottom/cryptgnupg-sc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptroot
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/mdadm
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/ntfs_3g
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=no
• local_top_used=no
• nfs_bottom
• '[' '=' yes ]
• '[' '=' yes ]
• nfs_premount_used=no
• nfs_top_used=no
• local_bottom
• '[' no '=' yes ]
• '[' no '=' yes ]
• local_premount_used=no
• local_top_used=no
• maybe_break bottom
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-bottom' Begin: Running /scripts/init-bottom ... + return 0
• run_scripts /scripts/init-bottom
• initdir=/scripts/init-bottom
• '[' '!' -d /scripts/init-bottom ]
• shift
• . /scripts/init-bottom/ORDER
• /scripts/init-bottom/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/lvm2
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/overlayroot
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/udev
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/copymods
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/plymouth
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• mount -n -o move /run /root/run
• validate_init /sbin/init
• run-init -n /root /sbin/init
• validate_init /sbin/init
• run-init -n /root /sbin/init
• maybe_break init
• unset debug
• unset MODPROBE_OPTIONS
• unset DPKG_ARCH
• unset ROOTFLAGS
• unset ROOTFSTYPE
• unset ROOTDELAY
• unset ROOT
• unset IP
• unset IP6
• unset VLAN
• unset BOOT
• unset BOOTIF
• unset DEVICE
• unset UBIMTD
• unset blacklist
• unset break
• unset noresume
• unset panic
• unset quiet
• unset readonly
• unset resume
• unset resume_offset
• unset noresume
• unset fastboot
• unset forcefsck
• unset fsckfix
• unset starttime
• mount -n -o move /sys /root/sys
• mount -n -o move /proc /root/proc
• exec run-init /root /sbin/init [ 12.105235] [drm] kms: can't enable cloning when we probably wanted to. [ 25.605343] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 25.605525] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 25.606226] (detected by 1, t=5252 jiffies, g=-287, q=1585) [ 25.611946] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 25.617665] Call trace: [ 25.622771] dump_backtrace+0x0/0x1c0 [ 25.627864] show_stack+0x18/0x68 [ 25.632889] sched_show_task+0x154/0x198 [ 25.637899] rcu_sched_clock_irq+0xbec/0xd78 [ 25.642890] update_process_times+0x9c/0xd0 [ 25.647897] tick_sched_handle.isra.19+0x34/0x58 [ 25.652895] tick_sched_timer+0x4c/0xa8 [ 25.657817] __hrtimer_run_queues+0x120/0x1b8 [ 25.662712] hrtimer_interrupt+0xd8/0x238 [ 25.667564] arch_timer_handler_phys+0x2c/0x50 [ 25.672383] handle_percpu_devid_irq+0x84/0x138 [ 25.677144] handle_domain_irq+0x5c/0x90 [ 25.681838] gic_handle_irq+0xb0/0xd0 [ 25.686471] call_on_irq_stack+0x28/0x50 [ 25.691048] do_interrupt_handler+0x58/0x60 [ 25.695576] el1_interrupt+0x30/0x78 [ 25.700043] el1h_64_irq_handler+0x18/0x28 [ 25.704472] el1h_64_irq+0x74/0x78 [ 25.708823] xas_start+0x48/0xd0 [ 25.713103] xas_find+0x190/0x1d8 [ 25.717313] find_lock_entries+0x7c/0x330 [ 25.721488] truncate_inode_pages_range+0xb8/0x6c8 [ 25.725536] truncate_inode_pages_final+0x68/0x78 [ 25.729356] evict+0x144/0x150 [ 25.733020] iput+0x134/0x1b8 [ 25.736527] do_unlinkat+0x17c/0x2a8 [ 25.740075] __arm64_sys_unlinkat+0x40/0x88 [ 25.743674] invoke_syscall+0x44/0x100 [ 25.747079] el0_svc_common.constprop.3+0x6c/0xf0 [ 25.750365] do_el0_svc+0x24/0x88 [ 25.753589] el0_svc+0x20/0x60 [ 25.756751] el0t_64_sync_handler+0x90/0xb8 [ 25.759957] el0t_64_sync+0x180/0x184 [ 31.709372] VDDIO_BOOT: disabling

[dsx724]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.55-00365-g4aa6e752aa31 (dxue@build-server) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]2 [ 0.000000] Machine model: Libre Computer AML-S905X-CC [ 0.000000] efi: EFI v2.90 by Das U-Boot [ 0.000000] efi: RTPROP=0x7ae86040 SMBIOS=0x7ae82000 RNG=0x5706d040 MEMRESERVE=0x5706c040 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7f3ecc00-0x7f3eefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x000000005706cfff] [ 0.000000] node 0: [mem 0x000000005706d000-0x000000005706dfff] [ 0.000000] node 0: [mem 0x000000005706e000-0x000000007ae81fff] [ 0.000000] node 0: [mem 0x000000007ae82000-0x000000007ae82fff] [ 0.000000] node 0: [mem 0x000000007ae83000-0x000000007ae85fff] [ 0.000000] node 0: [mem 0x000000007ae86000-0x000000007ae88fff] [ 0.000000] node 0: [mem 0x000000007ae89000-0x000000007ae89fff] [ 0.000000] node 0: [mem 0x000000007ae8a000-0x000000007ae8dfff] [ 0.000000] node 0: [mem 0x000000007ae8e000-0x000000007deaffff] [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff] [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007f806fff] [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s41368 r8192 d32360 u81920 [ 0.000000] pcpu-alloc: s41368 r8192 d32360 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31 root=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4 ro debug=vc systemd.log_level=debug systemd.log_target=console console=tty0 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1668336K/2097152K available (15232K kernel code, 3080K rwdata, 8272K rodata, 6208K init, 502K bss, 166672K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001235] Console: colour dummy device 80x25 [ 0.001785] printk: console [tty1] enabled [ 0.001878] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001903] pid_max: default: 32768 minimum: 301 [ 0.001969] LSM: Security Framework initializing [ 0.002077] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002103] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003476] rcu: Hierarchical SRCU implementation. [ 0.006107] Remapping and enabling EFI services. [ 0.006481] smp: Bringing up secondary CPUs ... [ 0.007003] Detected VIPT I-cache on CPU1 [ 0.007074] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007642] Detected VIPT I-cache on CPU2 [ 0.007701] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.008299] Detected VIPT I-cache on CPU3 [ 0.008358] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.008446] smp: Brought up 1 node, 4 CPUs [ 0.008514] SMP: Total of 4 processors activated. [ 0.008526] CPU features: detected: 32-bit EL0 Support [ 0.008535] CPU features: detected: 32-bit EL1 Support [ 0.008547] CPU features: detected: CRC32 instructions [ 0.014692] CPU: All CPU(s) started at EL2 [ 0.014765] alternatives: patching kernel code [ 0.016323] devtmpfs: initialized [ 0.022197] KASLR enabled [ 0.022396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022432] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.029757] pinctrl core: initialized pinctrl subsystem [ 0.030723] SMBIOS 3.0 present. [ 0.030767] DMI: Unknown Unknown Product/Unknown Product, BIOS 2022.07-00302-gf2bfed3881 07/01/2022 [ 0.031329] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.032750] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.032926] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.033072] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.033177] audit: initializing netlink subsys (disabled) [ 0.033407] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 [ 0.034645] thermal_sys: Registered thermal governor 'step_wise' [ 0.034658] thermal_sys: Registered thermal governor 'power_allocator' [ 0.034925] cpuidle: using governor menu [ 0.035282] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.035392] ASID allocator initialised with 32768 entries [ 0.037026] Serial: AMBA PL011 UART driver [ 0.056518] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.058921] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.059749] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.070870] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.070905] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.070919] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.070932] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.072035] cryptd: max_cpu_qlen set to 1000 [ 0.074034] ACPI: Interpreter disabled. [ 0.076054] VDDIO_BOOT: supplied by VCC_3V3 [ 0.076826] iommu: Default domain type: Translated [ 0.076858] iommu: DMA domain TLB invalidation policy: strict mode [ 0.077173] vgaarb: loaded [ 0.077474] SCSI subsystem initialized [ 0.077660] libata version 3.00 loaded. [ 0.077882] usbcore: registered new interface driver usbfs [ 0.077935] usbcore: registered new interface driver hub [ 0.077972] usbcore: registered new device driver usb [ 0.078859] pps_core: LinuxPPS API ver. 1 registered [ 0.078876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.078901] PTP clock support registered [ 0.079026] EDAC MC: Ver: 3.0.0 [ 0.080057] Registered efivars operations [ 0.081240] FPGA manager framework [ 0.081345] Advanced Linux Sound Architecture Driver Initialized. [ 0.082428] clocksource: Switched to clocksource arch_sys_counter [ 0.082614] VFS: Disk quotas dquot_6.6.0 [ 0.082671] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.082858] pnp: PnP ACPI: disabled [ 0.088086] NET: Registered PF_INET protocol family [ 0.088249] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.089259] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.089357] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.089384] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.089509] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.089717] TCP: Hash tables configured (established 16384 bind 16384) [ 0.089860] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.089921] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.090082] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.090575] RPC: Registered named UNIX socket transport module. [ 0.090608] RPC: Registered udp transport module. [ 0.090618] RPC: Registered tcp transport module. [ 0.090628] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.090646] PCI: CLS 0 bytes, default 64 [ 0.090846] Unpacking initramfs... [ 0.103044] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.103516] kvm [1]: IPA Size Limit: 40 bits [ 0.105057] kvm [1]: vgic interrupt IRQ9 [ 0.105227] kvm [1]: Hyp mode initialized successfully [ 0.109113] Initialise system trusted keyrings [ 0.109388] workingset: timestamp_bits=42 max_order=19 bucket_order=0 [ 0.115526] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.116363] NFS: Registering the id_resolver key type [ 0.116421] Key type id_resolver registered [ 0.116432] Key type id_legacy registered [ 0.116539] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.116565] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.116816] 9p: Installing v9fs 9p2000 file system support [ 0.153499] Key type asymmetric registered [ 0.153544] Asymmetric key parser 'x509' registered [ 0.153677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.153710] io scheduler mq-deadline registered [ 0.153722] io scheduler kyber registered [ 0.172789] EINJ: ACPI disabled. [ 0.193793] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected [ 0.204174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.207795] SuperH (H)SCI(F) driver initialized [ 0.208623] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 0.330807] printk: console [ttyAML0] enabled [ 0.332162] msm_serial: driver initialized [ 0.343303] loop: module loaded [ 0.345249] megasas: 07.717.02.00-rc1 [ 0.355466] tun: Universal TUN/TAP device driver, 1.6 [ 0.357033] thunder_xcv, ver 1.0 [ 0.357132] thunder_bgx, ver 1.0 [ 0.357199] nicpf, ver 1.0 [ 0.359736] hclge is initializing [ 0.359801] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.360331] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.361074] e1000: Intel(R) PRO/1000 Network Driver [ 0.361503] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.362247] e1000e: Intel(R) PRO/1000 Network Driver [ 0.362753] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.363503] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.364032] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.364746] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.365392] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.366979] sky2: driver version 1.30 [ 0.368856] VFIO - User Level meta-driver version: 0.3 [ 0.373138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.373279] ehci-pci: EHCI PCI platform driver [ 0.373872] ehci-platform: EHCI generic platform driver [ 0.374745] ehci-orion: EHCI orion driver [ 0.375145] ehci-exynos: EHCI Exynos driver [ 0.375624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.376067] ohci-pci: OHCI PCI platform driver [ 0.376646] ohci-platform: OHCI generic platform driver [ 0.377487] ohci-exynos: OHCI Exynos driver [ 0.379138] usbcore: registered new interface driver usb-storage [ 0.385466] i2c_dev: i2c /dev entries driver [ 0.395646] sdhci: Secure Digital Host Controller Interface driver [ 0.395752] sdhci: Copyright(c) Pierre Ossman [ 0.397608] Synopsys Designware Multimedia Card Interface Driver [ 0.398655] Freeing initrd memory: 30104K [ 0.399486] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.399573] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.403594] ledtrig-cpu: registered to indicate activity on CPUs [ 0.404832] efifb: probing for efifb [ 0.405012] efifb: framebuffer at 0x7f807000, using 8100k, total 8100k [ 0.405371] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.406070] efifb: scrolling: redraw [ 0.406511] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.432396] Console: switching to colour frame buffer device 240x67 [ 0.432905] meson-gx-mmc d0074000.mmc: no support for card's volts [ 0.432914] mmc0: error -22 whilst initialising SDIO card [ 0.457592] fb0: EFI VGA frame buffer device [ 0.458728] meson-sm: secure-monitor enabled [ 0.460363] usbcore: registered new interface driver usbhid [ 0.460587] usbhid: USB HID core driver [ 0.462294] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.470999] NET: Registered PF_PACKET protocol family [ 0.471293] 9pnet: Installing 9P2000 support [ 0.471576] Key type dns_resolver registered [ 0.472443] Loading compiled-in X.509 certificates [ 0.492532] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 0.492689] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 1.024532] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 1.025019] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 1.025940] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 1.029602] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.029779] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.030822] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 1.031785] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xc9000000 [ 1.033109] hub 1-0:1.0: USB hub found [ 1.033244] hub 1-0:1.0: 2 ports detected [ 1.033775] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.034116] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.035053] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.035814] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.037329] hub 2-0:1.0: USB hub found [ 1.037458] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.042861] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 1.043366] meson-gx-mmc d0072000.mmc: Got CD GPIO domain-0 init dvfs: 4 [ 1.057445] ALSA device list: [ 1.057542] No soundcards found. [ 1.073033] Freeing unused kernel memory: 6208K [ 1.073313] Run /init as init process [ 1.073424] with arguments: [ 1.073750] /init [ 1.074051] with environment: [ 1.079519] HOME=/ [ 1.084566] TERM=linux [ 1.089215] BOOT_IMAGE=/boot/vmlinuz-5.15.55-00365-g4aa6e752aa31 Loading, please wait...

• '[' -z ]
• BOOT=local
• '[' -n ]
• '[' '=' none ]
• resume=
• mount -t tmpfs -o 'nodev,noexec,nosuid,size=10%,mode=0755' tmpfs[ 1.129254] mmc1: new high speed SDHC card at address aaaa /run
• mkdir -m 0700 /run/initramfs
• '[' -n ]
• maybe_break top
• run_scripts /scripts/init-top
• initdir=/scripts/init-top
• '[' '!' -d /scripts/init-top ]
• shift
• . /scripts/init-top/ORDER
• /s[ 1.135700] mmcblk1: mmc1:aaaa SC16G 14.8 GiB cripts/init-top/all_generic_ide
• '[' -e /conf/param.conf ]
• /scripts/init-top/blacklist
• '[' -e /conf/param.conf ] [ 1.147379] mmcblk1: p1 p2
• /scripts/init-top/udev Starting version 249.11-0ubuntu3.4 [ 1.286510] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.485588] hub 1-1:1.0: USB hub found [ 1.490443] hub 1-1:1.0: 4 ports detected [ 1.743474] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 1.747904] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 1.752289] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 1.752950] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 1.756578] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 1.764953] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 1.769481] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 1.778603] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 1.782987] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 1.787359] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.792575] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 1.797025] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.801329] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.807085] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.815752] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.827321] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.827469] lima d00c0000.gpu: bus rate = 166666667 [ 1.834798] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.835633] lima d00c0000.gpu: mod rate = 24000000 [ 1.843870] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 1.846492] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd [ 1.848460] checking generic (7f807000 7e9000) vs hw (0 ffffffffffffffff) [ 1.856955] fb0: switching to meson from EFI VGA [ 1.859118] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.865335] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.869621] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.872429] lima d00c0000.gpu: Failed to register cooling device [ 1.882005] Console: switching to colour dummy device 80x25 [ 1.885960] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0 [ 1.914698] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 1.919101] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 1.920162] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 1.921225] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1 [ 2.043684] [drm] kms: can't enable cloning when we probably wanted to. [ 2.063492] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:6047.0001/input/input0 [ 2.123814] hid-generic 0003:17EF:6047.0001: input: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.132128] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input1 [ 2.132801] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/2 [ 2.191672] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input3 [ 2.192249] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input4 [ 2.193060] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:17EF:6047.0002/input/input5 [ 2.193407] hid-generic 0003:17EF:6047.0002: input: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-xhci-hcd.0.auto-1.1/input1 [ 2.215499] Console: switching to colour frame buffer device 240x67 [ 2.317686] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
• '[' -e /conf/param.conf ]
• /scripts/init-top/framebuffer
• '[' -e /conf/param.conf ]
• /scripts/init-top/console_setup
• '[' -e /conf/param.conf ]
• maybe_break modules
• '[' n '!=' y ]
• log_begin_msg 'Loading essential drivers'
• _log_msg 'Begin: %s ... ' 'Loading essential drivers'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Loading essential drivers' Begin: Loading essential drivers ... + return 0
• '[' -n ]
• load_modules
• '[' -e /conf/modules ]
• read -r m
• '[' -z linear ]
• printf '%.1s' linear
• com=l
• '[' l '=' '#' ]
• modprobe linear
• read -r m
• '[' -z multipath ]
• printf '%.1s' multipath
• com=m
• '[' m '=' '#' ]
• modprobe multipath
• read -r m
• '[' -z raid0 ]
• printf '%.1s' raid0
• com=r
• '[' r '=' '#' ]
• modprobe raid0
• read -r m
• '[' -z raid1 ]
• printf '%.1s' raid1
• com=r
• '[' r '=' '#' ]
• modprobe raid1
• read -r m
• '[' -z raid456 ]
• printf '%.1s' raid456
• com=r
• '[' r '=' '#' ]
• modprobe raid456
• read -r m
• '[' -z raid5 ]
• printf '%.1s' raid5
• com=r
• '[' r '=' '#' ]
• modprobe raid5
• read -r m
• '[' -z raid6 ]
• printf '%.1s' raid6
• com=r
• '[' r '=' '#' ]
• modprobe raid6
• read -r m
• '[' -z raid10 ]
• printf '%.1s' raid10
• com=r
• '[' r '=' '#' ]
• modprobe raid10
• read -r m
• '[' -z efivars ]
• printf '%.1s' efivars
• com=e
• '[' e '=' '#' ]
• modprobe efivars
• read -r m
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• _uptime
• local uptime
• cat /proc/uptime
• uptime='2.73 6.43'
• uptime=2
• echo 2
• starttime=2
• starttime=3
• export starttime
• maybe_break premount
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-premount' Begin: Running /scripts/init-premount ... + return 0
• run_scripts /scripts/init-premount
• initdir=/scripts/init-premount
• '[' '!' -d /scripts/init-premount ]
• shift
• . /scripts/init-premount/ORDER
• /scripts/init-premount/plymouth
• '[' -e /conf/param.conf ]
• /scripts/init-premount/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• maybe_break mount
• log_begin_msg 'Mounting root file system'
• _log_msg 'Begin: %s ... ' 'Mounting root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Mounting root file system' Begin: Mounting root file system ... + return 0
• . /scripts/local
• . /scripts/nfs
• . /scripts/local
• parse_numeric 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• return
• maybe_break mountroot
• mount_top
• local_top
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-top'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-top'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-top' Begin: Running /scripts/local-top ... + return 0
• run_scripts /scripts/local-top
• initdir=/scripts/local-top
• '[' '!' -d /scripts/local-top ]
• shift
• . /scripts/local-top/ORDER
• /scripts/local-top/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-top/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-top/lvm2
• '[' -e /conf/param.conf ]
• /scripts/local-top/cryptroot
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_top_used=yes
• mount_premount
• local_premount
• '[' '!=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-premount'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-premount'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-premount' Begin: Running /scripts/local-premount ... + return 0
• run_scripts /scripts/local-premount
• initdir=/scripts/local-premount
• '[' '!' -d /scripts/local-premount ]
• shift
• . /scripts/local-premount/ORDER
• /scripts/local-premount/btrfs [ 2.906461] raid6: neonx8 gen() 1900 MB/s [ 2.974422] raid6: neonx8 xor() 1696 MB/s [ 3.042426] raid6: neonx4 gen() 2647 MB/s [ 3.110424] raid6: neonx4 xor() 1894 MB/s [ 3.178425] raid6: neonx2 gen() 2586 MB/s [ 3.246420] raid6: neonx2 xor() 1764 MB/s [ 3.314427] raid6: neonx1 gen() 2000 MB/s [ 3.382424] raid6: neonx1 xor() 1432 MB/s [ 3.450421] raid6: int64x8 gen() 1434 MB/s [ 3.518420] raid6: int64x8 xor() 888 MB/s [ 3.586433] raid6: int64x4 gen() 1998 MB/s [ 3.654421] raid6: int64x4 xor() 1000 MB/s [ 3.722419] raid6: int64x2 gen() 1671 MB/s [ 3.790429] raid6: int64x2 xor() 893 MB/s [ 3.858449] raid6: int64x1 gen() 1247 MB/s [ 3.926440] raid6: int64x1 xor() 537 MB/s [ 3.927508] raid6: using algorithm neonx4 gen() 2647 MB/s [ 3.928871] raid6: .... xor() 1894 MB/s, rmw enabled [ 3.930122] raid6: using neon recovery algorithm [ 3.942648] xor: measuring software checksum speed [ 3.946307] 8regs : 2793 MB/sec [ 3.949305] 32regs : 3434 MB/sec [ 3.952838] arm64_neon : 2931 MB/sec [ 3.952938] xor: using function: 32regs (3434 MB/sec) [ 3.976438] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no Scanning for Btrfs filesystems [ 4.139950] BTRFS: device label writable devid 1 transid 758 /dev/mmcblk1p2 scanned by btrfs (245)
• '[' -e /conf/param.conf ]
• /scripts/local-premount/fixrtc
• '[' -e /conf/param.conf ]
• /scripts/local-premount/ntfs_3g
• '[' -e /conf/param.conf ]
• /scripts/local-premount/resume
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=yes
• mountroot
• local_mount_root
• local_top
• '[' yes '!=' yes ]
• local_top_used=yes
• '[' -z 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• local_device_setup 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 'root file system'
• local 'dev_id=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'name=root file system'
• local 'may_panic=true'
• local real_dev
• local time_elapsed
• local count
• local 'slumber=30'
• slumber=30
• '[' 0 -gt 30 ]
• wait-for-root 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' 30
• FSTYPE=btrfs
• '[' -n ]
• '[' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• '[' f576022f-9541-4435-adde-dc39f8ea1fa4 '=' 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' ]
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• resolve_device 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• DEV='UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• local 'orig=UUID=f576022f-9541-4435-adde-dc39f8ea1fa4'
• blkid -l -t 'UUID=f576022f-9541-4435-adde-dc39f8ea1fa4' -o device
• DEV=/dev/mmcblk1p2
• '[' -e /dev/mmcblk1p2 ]
• echo /dev/mmcblk1p2
• real_dev=/dev/mmcblk1p2
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• DEV=/dev/mmcblk1p2
• ROOT=/dev/mmcblk1p2
• '[' -z ]
• get_fstype /dev/mmcblk1p2
• local FS FSTYPE
• FS=/dev/mmcblk1p2
• blkid -o value -s TYPE /dev/mmcblk1p2
• FSTYPE=btrfs
• echo btrfs
• return 0
• FSTYPE=btrfs
• local_premount
• '[' yes '!=' yes ]
• local_premount_used=yes
• '[' y '=' y ]
• '[' -z ]
• roflag=-r
• checkfs /dev/mmcblk1p2 root btrfs
• _checkfs_once /dev/mmcblk1p2 root btrfs
• DEV=/dev/mmcblk1p2
• NAME=root
• TYPE=btrfs
• '[' root '=' / ]
• FSCK_LOGFILE=/run/initramfs/fsck.log
• FSCK_STAMPFILE=/run/initramfs/fsck-root
• '[' btrfs '=' auto ]
• FSCKCODE=0
• '[' -z btrfs ]
• command -v fsck
• '[' n '=' y ]
• '[' n '=' y ]
• force=
• '[' '=' y ]
• '[' '=' n ]
• fix=-a
• spinner=
• '[' -z y ]
• '[' n '=' n ]
• log_begin_msg 'Will now check root file system'
• _log_msg 'Begin: %s ... ' 'Will now check root file system'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Will now check root file system' Begin: Will now check root file system ... + return 0
• logsave -a -s /run/initramfs/fsck.log fsck -a -V -t btrfs /dev/mmcblk1p2 fsck from util-linux 2.37.2 [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2
• FSCKCODE=0
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• '[' 0 -eq 32 ]
• '[' 0 -eq 4 ]
• '[' 0 -gt 1 ]
• true
• return 0
• mount -r -t btrfs /dev/mmcblk1p2 /root [ 4.302668] BTRFS info (device mmcblk1p2): flagging fs with big metadata feature [ 4.303095] BTRFS info (device mmcblk1p2): disk space caching is enabled [ 4.303829] BTRFS info (device mmcblk1p2): has skinny extents [ 4.325631] BTRFS info (device mmcblk1p2): enabling ssd optimizations
• mountroot_status=0
• '[' ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• read_fstab_entry /usr
• found=1
• '[' -f /root/etc/fstab ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' / '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• '[' /boot/firmware '=' /usr ]
• read -r MNT_FSNAME MNT_DIR MNT_TYPE MNT_OPTS MNT_FREQ MNT_PASS MNT_JUNK
• return 1
• mount_bottom
• local_bottom
• '[' yes '=' yes ]
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/local-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/local-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/local-bottom' Begin: Running /scripts/local-bottom ... + return 0
• run_scripts /scripts/local-bottom
• initdir=/scripts/local-bottom
• '[' '!' -d /scripts/local-bottom ]
• shift
• . /scripts/local-bottom/ORDER
• /scripts/local-bottom/cryptgnupg-sc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptopensc
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/cryptroot
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/iscsi
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/mdadm
• '[' -e /conf/param.conf ]
• /scripts/local-bottom/ntfs_3g
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• local_premount_used=no
• local_top_used=no
• nfs_bottom
• '[' '=' yes ]
• '[' '=' yes ]
• nfs_premount_used=no
• nfs_top_used=no
• local_bottom
• '[' no '=' yes ]
• '[' no '=' yes ]
• local_premount_used=no
• local_top_used=no
• maybe_break bottom
• '[' n '!=' y ]
• log_begin_msg 'Running /scripts/init-bottom'
• _log_msg 'Begin: %s ... ' 'Running /scripts/init-bottom'
• '[' n '=' y ]
• printf 'Begin: %s ... ' 'Running /scripts/init-bottom' Begin: Running /scripts/init-bottom ... + return 0
• run_scripts /scripts/init-bottom
• initdir=/scripts/init-bottom
• '[' '!' -d /scripts/init-bottom ]
• shift
• . /scripts/init-bottom/ORDER
• /scripts/init-bottom/cloud-initramfs-dyn-netconf
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/lvm2
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/overlayroot
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/udev
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/copymods
• '[' -e /conf/param.conf ]
• /scripts/init-bottom/plymouth
• '[' -e /conf/param.conf ]
• '[' n '!=' y ]
• log_end_msg
• _log_msg 'done.\n'
• '[' n '=' y ]
• printf 'done.\n' done.
• return 0
• mount -n -o move /run /root/run
• validate_init /sbin/init
• run-init -n /root /sbin/init
• validate_init /sbin/init
• run-init -n /root /sbin/init
• maybe_break init
• unset debug
• unset MODPROBE_OPTIONS
• unset DPKG_ARCH
• unset ROOTFLAGS
• unset ROOTFSTYPE
• unset ROOTDELAY
• unset ROOT
• unset IP
• unset IP6
• unset VLAN
• unset BOOT
• unset BOOTIF
• unset DEVICE
• unset UBIMTD
• unset blacklist
• unset break
• unset noresume
• unset panic
• unset quiet
• unset readonly
• unset resume
• unset resume_offset
• unset noresume
• unset fastboot
• unset forcefsck
• unset fsckfix
• unset starttime
• mount -n -o move /sys /root/sys
• mount -n -o move /proc /root/proc
• exec run-init /root /sbin/init [ 12.105999] [drm] kms: can't enable cloning when we probably wanted to. [ 25.658415] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 25.658595] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 25.664438] (detected by 2, t=5253 jiffies, g=-243, q=239) [ 25.669675] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 25.675482] Call trace: [ 25.680694] dump_backtrace+0x0/0x1c0 [ 25.685906] show_stack+0x18/0x68 [ 25.691075] sched_show_task+0x154/0x198 [ 25.696210] rcu_sched_clock_irq+0xbec/0xd78 [ 25.701313] update_process_times+0x9c/0xd0 [ 25.706371] tick_sched_handle.isra.19+0x34/0x58 [ 25.711416] tick_sched_timer+0x4c/0xa8 [ 25.716455] hrtimer_run_queues+0x120/0x1b8 [ 25.721505] hrtimer_interrupt+0xd8/0x238 [ 25.726510] arch_timer_handler_phys+0x2c/0x50 [ 25.731499] handle_percpu_devid_irq+0x84/0x138 [ 25.736445] handle_domain_irq+0x5c/0x90 [ 25.741329] gic_handle_irq+0xb0/0xd0 [ 25.746151] call_on_irq_stack+0x28/0x50 [ 25.750915] do_interrupt_handler+0x58/0x60 [ 25.755632] el1_interrupt+0x30/0x78 [ 25.760286] el1h_64_irq_handler+0x18/0x28 [ 25.764890] el1h_64_irq+0x74/0x78 [ 25.769416] xas_load+0x24/0xa8 [ 25.773880] xas_find+0x190/0x1d8 [ 25.778287] find_lock_entries+0x7c/0x330 [ 25.782511] truncate_inode_pages_range+0xb8/0x6c8 [ 25.786564] truncate_inode_pages_final+0x68/0x78 [ 25.790383] evict+0x144/0x150 [ 25.794048] iput+0x134/0x1b8 [ 25.797557] do_unlinkat+0x17c/0x2a8 [ 25.801105] __arm64_sys_unlinkat+0x40/0x88 [ 25.804705] invoke_syscall+0x44/0x100 [ 25.808113] el0_svc_common.constprop.3+0x6c/0xf0 [ 25.811401] do_el0_svc+0x24/0x88 [ 25.814629] el0_svc+0x20/0x60 [ 25.817793] el0t_64_sync_handler+0x90/0xb8 [ 25.821003] el0t_64_sync+0x180/0x184 [ 31.710453] VDDIO_BOOT: disabling [ 88.746416] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 88.749846] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 88.753300] (detected by 2, t=21025 jiffies, g=-243, q=239) [ 88.756733] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 88.760811] Call trace: [ 88.764352] dump_backtrace+0x0/0x1c0 [ 88.767947] show_stack+0x18/0x68 [ 88.771547] sched_show_task+0x154/0x198 [ 88.775181] rcu_sched_clock_irq+0xbec/0xd78 [ 88.778845] update_process_times+0x9c/0xd0 [ 88.782530] tick_sched_handle.isra.19+0x34/0x58 [ 88.786257] tick_sched_timer+0x4c/0xa8 [ 88.789989] hrtimer_run_queues+0x120/0x1b8 [ 88.793724] hrtimer_interrupt+0xd8/0x238 [ 88.797447] arch_timer_handler_phys+0x2c/0x50 [ 88.801180] handle_percpu_devid_irq+0x84/0x138 [ 88.804899] handle_domain_irq+0x5c/0x90 [ 88.808595] gic_handle_irq+0xb0/0xd0 [ 88.812307] call_on_irq_stack+0x28/0x50 [ 88.816036] do_interrupt_handler+0x58/0x60 [ 88.819763] el1_interrupt+0x30/0x78 [ 88.823445] el1h_64_irq_handler+0x18/0x28 [ 88.827063] el1h_64_irq+0x74/0x78 [ 88.830587] xas_load+0x40/0xa8 [ 88.834089] xas_find+0x190/0x1d8 [ 88.837577] find_lock_entries+0x7c/0x330 [ 88.841080] truncate_inode_pages_range+0xb8/0x6c8 [ 88.844566] truncate_inode_pages_final+0x68/0x78 [ 88.847986] evict+0x144/0x150 [ 88.851364] iput+0x134/0x1b8 [ 88.854693] do_unlinkat+0x17c/0x2a8 [ 88.857958] arm64_sys_unlinkat+0x40/0x88 [ 88.861182] invoke_syscall+0x44/0x100 [ 88.864408] el0_svc_common.constprop.3+0x6c/0xf0 [ 88.867668] do_el0_svc+0x24/0x88 [ 88.870914] el0_svc+0x20/0x60 [ 88.874142] el0t_64_sync_handler+0x90/0xb8 [ 88.877390] el0t_64_sync+0x180/0x184 [ 151.778415] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 151.781821] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 151.785214] (detected by 2, t=36783 jiffies, g=-243, q=239) [ 151.788559] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 151.792515] Call trace: [ 151.795912] dump_backtrace+0x0/0x1c0 [ 151.799342] show_stack+0x18/0x68 [ 151.802753] sched_show_task+0x154/0x198 [ 151.806177] rcu_sched_clock_irq+0xbec/0xd78 [ 151.809606] update_process_times+0x9c/0xd0 [ 151.813028] tick_sched_handle.isra.19+0x34/0x58 [ 151.816469] tick_sched_timer+0x4c/0xa8 [ 151.819902] hrtimer_run_queues+0x120/0x1b8 [ 151.823358] hrtimer_interrupt+0xd8/0x238 [ 151.826832] arch_timer_handler_phys+0x2c/0x50 [ 151.830321] handle_percpu_devid_irq+0x84/0x138 [ 151.833799] handle_domain_irq+0x5c/0x90 [ 151.837288] gic_handle_irq+0xb0/0xd0 [ 151.840759] call_on_irq_stack+0x28/0x50 [ 151.844246] do_interrupt_handler+0x58/0x60 [ 151.847745] el1_interrupt+0x30/0x78 [ 151.851229] el1h_64_irq_handler+0x18/0x28 [ 151.854722] el1h_64_irq+0x74/0x78 [ 151.858177] xas_load+0x5c/0xa8 [ 151.861608] xas_find+0x190/0x1d8 [ 151.865034] find_lock_entries+0x7c/0x330 [ 151.868476] truncate_inode_pages_range+0xb8/0x6c8 [ 151.871955] truncate_inode_pages_final+0x68/0x78 [ 151.875409] evict+0x144/0x150 [ 151.878812] iput+0x134/0x1b8 [ 151.882175] do_unlinkat+0x17c/0x2a8 [ 151.885511] arm64_sys_unlinkat+0x40/0x88 [ 151.888791] invoke_syscall+0x44/0x100 [ 151.892012] el0_svc_common.constprop.3+0x6c/0xf0 [ 151.895267] do_el0_svc+0x24/0x88 [ 151.898512] el0_svc+0x20/0x60 [ 151.901748] el0t_64_sync_handler+0x90/0xb8 [ 151.905002] el0t_64_sync+0x180/0x184 [ 214.810414] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 214.813818] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-3): P1 [ 214.817222] (detected by 2, t=52540 jiffies, g=-243, q=239) [ 214.820580] task:run-init state:R running task stack: 0 pid: 1 ppid: 0 flags:0x00000004 [ 214.824547] Call trace: [ 214.827950] dump_backtrace+0x0/0x1c0 [ 214.831384] show_stack+0x18/0x68 [ 214.834797] sched_show_task+0x154/0x198 [ 214.838225] rcu_sched_clock_irq+0xbec/0xd78 [ 214.841662] update_process_times+0x9c/0xd0 [ 214.845093] tick_sched_handle.isra.19+0x34/0x58 [ 214.848538] tick_sched_timer+0x4c/0xa8 [ 214.851964] hrtimer_run_queues+0x120/0x1b8 [ 214.855417] hrtimer_interrupt+0xd8/0x238 [ 214.858879] arch_timer_handler_phys+0x2c/0x50 [ 214.862375] handle_percpu_devid_irq+0x84/0x138 [ 214.865871] handle_domain_irq+0x5c/0x90 [ 214.869343] gic_handle_irq+0xb0/0xd0 [ 214.872830] call_on_irq_stack+0x28/0x50 [ 214.876309] do_interrupt_handler+0x58/0x60 [ 214.879807] el1_interrupt+0x30/0x78 [ 214.883302] el1h_64_irq_handler+0x18/0x28 [ 214.886802] el1h_64_irq+0x74/0x78 [ 214.890268] xas_load+0x60/0xa8 [ 214.893713] xas_find+0x190/0x1d8 [ 214.897131] find_lock_entries+0x7c/0x330 [ 214.900574] truncate_inode_pages_range+0xb8/0x6c8 [ 214.904044] truncate_inode_pages_final+0x68/0x78 [ 214.907499] evict+0x144/0x150 [ 214.910901] iput+0x134/0x1b8 [ 214.914262] do_unlinkat+0x17c/0x2a8 [ 214.917596] __arm64_sys_unlinkat+0x40/0x88 [ 214.920873] invoke_syscall+0x44/0x100 [ 214.924095] el0_svc_common.constprop.3+0x6c/0xf0 [ 214.927351] do_el0_svc+0x24/0x88 [ 214.930596] el0_svc+0x20/0x60 [ 214.933830] el0t_64_sync_handler+0x90/0xb8 [ 214.937081] el0t_64_sync+0x180/0x184

[dsx724]

I have logged some soft-error conditions here: http://log.libre.computer/manual/2022-07-25/log_error_soft

[dsx724]

Updated first post.

[dsx724]

Preliminary results for disabling ethernet completely in u-boot and then initializing the PHY in Linux is promising. Currently testing the fix for long term viability.

[dsx724]

Closing this as an Linux bug. This is a u-boot bug.