When I use the command: modprobe gamecon map = 0,7,0,0,7,0; After the driver is loaded, the psx handle model that should have appeared in input > port 1 controls > device index now only displays disabled after modification!

Please provide some log as mentioned in the template issue.

It is important to provide logs for debugging as part of your report. Instructions for generating logs can be found in the Troubleshooting Lakka documentation at https://www.lakka.tv/doc/Troubleshooting-Lakka/

Log here: 1. [INFO] [Config]: Loading default config. [INFO] [Config]: Looking for config in: "/storage/.config/retroarch/retroarch.cfg". [INFO] RetroArch 1.9.9 (Git 36888612eb) [INFO] === Build ======================================= [INFO] CPU Model Name: Intel(R) Xeon(R) CPU L3110 @ 3.00GHz [INFO] 容量: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 [INFO] Built: Sep 8 2021 [INFO] Version: 1.9.9 [INFO] Git: 36888612eb [INFO] ================================================= [INFO] [Input]: Found input driver: "udev". [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565. [INFO] libretro API 版本: 1 [INFO] 未按照 API 编译: 1 [INFO] [Audio]: Set audio input rate to: 48000.00 Hz. [INFO] [Video]: Video @ fullscreen [INFO] [Video]: Starting threaded video driver ... [INFO] [DRM]: Found 3 connectors. [INFO] [DRM]: Connector 0 connected: yes [INFO] [DRM]: Connector 0 has 26 modes. [INFO] [DRM]: Connector 0 assigned to monitor index: #1. [INFO] [DRM]: Connector 1 connected: no [INFO] [DRM]: Connector 1 has 0 modes. [INFO] [DRM]: Connector 2 connected: no [INFO] [DRM]: Connector 2 has 0 modes. [INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60.000000 Hz [INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 59.940201 Hz [INFO] [DRM]: Mode 2: (1920x1080i) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 3: (1920x1080i) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 4: (1920x1080) 1920 x 1080, 50.000000 Hz [INFO] [DRM]: Mode 5: (1920x1080i) 1920 x 1080, 25.000000 Hz [INFO] [DRM]: Mode 6: (1920x1080) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 7: (1920x1080) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 24.000000 Hz [INFO] [DRM]: Mode 9: (1920x1080) 1920 x 1080, 23.976080 Hz [INFO] [DRM]: Mode 10: (1600x900) 1600 x 900, 60.000000 Hz [INFO] [DRM]: Mode 11: (1280x1024) 1280 x 1024, 60.019741 Hz [INFO] [DRM]: Mode 12: (1280x720) 1280 x 720, 60.000000 Hz [INFO] [DRM]: Mode 13: (1280x720) 1280 x 720, 59.940201 Hz [INFO] [DRM]: Mode 14: (1280x720) 1280 x 720, 50.000000 Hz [INFO] [DRM]: Mode 15: (1280x720) 1280 x 720, 30.000000 Hz [INFO] [DRM]: Mode 16: (1280x720) 1280 x 720, 29.970100 Hz [INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 24.000000 Hz [INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 23.976162 Hz [INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60.003841 Hz [INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60.316540 Hz [INFO] [DRM]: Mode 21: (720x576) 720 x 576, 50.000000 Hz [INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60.000000 Hz [INFO] [DRM]: Mode 23: (720x480) 720 x 480, 59.940060 Hz [INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60.000000 Hz [INFO] [DRM]: Mode 25: (640x480) 640 x 480, 59.940475 Hz libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. [INFO] [GL]: Found GL context: kms [INFO] [GL]: Detecting screen resolution 1920x1080. [INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT [INFO] [EGL]: EGL version: 1.5 [INFO] [EGL]: Current context: 0x7fc93c006470. [INFO] [KMS]: New FB: 1920x1080 (stride: 7680). [INFO] [GL]: Vendor: nouveau, Renderer: NV106. [INFO] [GL]: Version: 4.3 (Compatibility Profile) Mesa 21.2.1. [INFO] [GL]: Using resolution 1920x1080 [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shader driver]: Using GLSL shader backend. [INFO] [GLSL]: Checking GLSL shader support ... [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] Setting up menu pipeline shaders for XMB ... [INFO] [GLSL]: Compiling ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling simple ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling modern snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling bokeh shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snowflake shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [INFO] [GL]: Using GL_RGB565 for texture uploads. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver. [INFO] [udev]: Keyboard #0: "Power Button" (/dev/input/event1). [INFO] [udev]: Keyboard #1: "Power Button" (/dev/input/event0). [INFO] [udev]: Keyboard #2: "SIGMACHIP USB Keyboard" (/dev/input/event2). [INFO] [udev]: Keyboard #3: "SIGMACHIP USB Keyboard Consumer Control" (/dev/input/event3). [INFO] [udev]: Keyboard #4: "SIGMACHIP USB Keyboard System Control" (/dev/input/event4). [INFO] [Joypad]: Found joypad driver: "udev". [INFO] [Video]: Found display server: null [WARN] [udev]: Mouse grab/ungrab feature unavailable. [INFO] ALSA: Using signed 16-bit format. [INFO] ALSA: Period size: 384 frames [INFO] ALSA: Buffer size: 1536 frames wifi is not available [INFO] [Display]: Found display driver: "gl". [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. function is no-op

[INFO] [Playlist]: 正在加载收藏文件: [/storage/.config/retroarch/content_favorites.lpl]. function is no-op function is no-op function is no-op [INFO] [KMS]: New FB: 1920x1080 (stride: 7680). [INFO] [KMS]: New FB: 1920x1080 (stride: 7680).

2. [INFO] [Config]: Loading default config. [INFO] [Config]: Looking for config in: "/storage/.config/retroarch/retroarch.cfg". [INFO] RetroArch 1.9.9 (Git 36888612eb) [INFO] === Build ======================================= [INFO] CPU Model Name: Intel(R) Xeon(R) CPU L3110 @ 3.00GHz [INFO] 容量: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 [INFO] Built: Sep 8 2021 [INFO] Version: 1.9.9 [INFO] Git: 36888612eb [INFO] ================================================= [INFO] [Input]: Found input driver: "udev". [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565. [INFO] libretro API 版本: 1 [INFO] 未按照 API 编译: 1 [INFO] [Audio]: Set audio input rate to: 48000.00 Hz. [INFO] [Video]: Video @ fullscreen [INFO] [Video]: Starting threaded video driver ... [INFO] [DRM]: Found 3 connectors. [INFO] [DRM]: Connector 0 connected: yes [INFO] [DRM]: Connector 0 has 26 modes. [INFO] [DRM]: Connector 0 assigned to monitor index: #1. [INFO] [DRM]: Connector 1 connected: no [INFO] [DRM]: Connector 1 has 0 modes. [INFO] [DRM]: Connector 2 connected: no [INFO] [DRM]: Connector 2 has 0 modes. [INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60.000000 Hz [INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 59.940201 Hz [INFO] [DRM]: Mode 2: (1920x1080i) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 3: (1920x1080i) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 4: (1920x1080) 1920 x 1080, 50.000000 Hz [INFO] [DRM]: Mode 5: (1920x1080i) 1920 x 1080, 25.000000 Hz [INFO] [DRM]: Mode 6: (1920x1080) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 7: (1920x1080) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 24.000000 Hz [INFO] [DRM]: Mode 9: (1920x1080) 1920 x 1080, 23.976080 Hz [INFO] [DRM]: Mode 10: (1600x900) 1600 x 900, 60.000000 Hz [INFO] [DRM]: Mode 11: (1280x1024) 1280 x 1024, 60.019741 Hz [INFO] [DRM]: Mode 12: (1280x720) 1280 x 720, 60.000000 Hz [INFO] [DRM]: Mode 13: (1280x720) 1280 x 720, 59.940201 Hz [INFO] [DRM]: Mode 14: (1280x720) 1280 x 720, 50.000000 Hz [INFO] [DRM]: Mode 15: (1280x720) 1280 x 720, 30.000000 Hz [INFO] [DRM]: Mode 16: (1280x720) 1280 x 720, 29.970100 Hz [INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 24.000000 Hz [INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 23.976162 Hz [INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60.003841 Hz [INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60.316540 Hz [INFO] [DRM]: Mode 21: (720x576) 720 x 576, 50.000000 Hz [INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60.000000 Hz [INFO] [DRM]: Mode 23: (720x480) 720 x 480, 59.940060 Hz [INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60.000000 Hz [INFO] [DRM]: Mode 25: (640x480) 640 x 480, 59.940475 Hz libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. [INFO] [GL]: Found GL context: kms [INFO] [GL]: Detecting screen resolution 1920x1080. [INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT [INFO] [EGL]: EGL version: 1.5 [INFO] [EGL]: Current context: 0x7fc93c006470. [INFO] [KMS]: New FB: 1920x1080 (stride: 7680). [INFO] [GL]: Vendor: nouveau, Renderer: NV106. [INFO] [GL]: Version: 4.3 (Compatibility Profile) Mesa 21.2.1. [INFO] [GL]: Using resolution 1920x1080 [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shader driver]: Using GLSL shader backend. [INFO] [GLSL]: Checking GLSL shader support ... [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] Setting up menu pipeline shaders for XMB ... [INFO] [GLSL]: Compiling ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling simple ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling modern snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling bokeh shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snowflake shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [INFO] [GL]: Using GL_RGB565 for texture uploads. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver. [INFO] [udev]: Keyboard #0: "Power Button" (/dev/input/event1). [INFO] [udev]: Keyboard #1: "Power Button" (/dev/input/event0). [INFO] [udev]: Keyboard #2: "SIGMACHIP USB Keyboard" (/dev/input/event2). [INFO] [udev]: Keyboard #3: "SIGMACHIP USB Keyboard Consumer Control" (/dev/input/event3). [INFO] [udev]: Keyboard #4: "SIGMACHIP USB Keyboard System Control" (/dev/input/event4). [INFO] [Joypad]: Found joypad driver: "udev". [INFO] [Video]: Found display server: null [WARN] [udev]: Mouse grab/ungrab feature unavailable. [INFO] ALSA: Using signed 16-bit format. [INFO] ALSA: Period size: 384 frames [INFO] ALSA: Buffer size: 1536 frames wifi is not available [INFO] [Display]: Found display driver: "gl". [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. function is no-op

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月9日(星期四) 下午4:18 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

Please provide some log as mentioned in the template issue.

It is important to provide logs for debugging as part of your report. Instructions for generating logs can be found in the Troubleshooting Lakka documentation at https://www.lakka.tv/doc/Troubleshooting-Lakka/

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

log: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.09.09 18:13:27 =~=~=~=~=~=~=~=~=~=~=~=

###########################################

Lakka - The DIY retro emulation console

...... visit http://www.lakka.tv ......

###########################################

Lakka (official): devel-20210908010416-fc2b556 (Generic.x86_64)

lsmod

Module Size Used by snd_emu10k1_synth 24576 0 snd_emux_synth 40960 1 snd_emu10k1_synth snd_seq_midi_emul 20480 1 snd_emux_synth snd_seq_virmidi 16384 1 snd_emux_synth snd_seq_midi 20480 0 snd_seq_midi_event 16384 2 snd_seq_midi,snd_seq_virmidi snd_seq 65536 6 snd_seq_midi,snd_seq_midi_event,snd_seq_virmidi,snd_seq_midi_emul,snd_emux_synth gamecon 24576 0 parport 32768 1 gamecon 8021q 24576 0 rfkill 20480 1 snd_hda_codec_hdmi 57344 1 snd_emu10k1 155648 1 snd_emu10k1_synth snd_hda_intel 45056 0 snd_util_mem 16384 2 snd_emu10k1,snd_emux_synth snd_intel_dspcfg 20480 1 snd_hda_intel snd_ac97_codec 126976 1 snd_emu10k1 snd_hda_codec 110592 2 snd_hda_codec_hdmi,snd_hda_intel ac97_bus 16384 1 snd_ac97_codec snd_hda_core 73728 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 32768 3 snd_seq_midi,snd_emu10k1,snd_seq_virmidi snd_seq_device 16384 5 snd_seq,snd_seq_midi,snd_emu10k1,snd_emu10k1_synth,snd_rawmidi snd_hwdep 16384 3 snd_hda_codec,snd_emu10k1,snd_emux_synth rng_core 16384 0 asus_atk0110 24576 0 overlay 114688 7

lsusb

Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg

[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 5.10.60 @.*) (x86_64-libreelec-linux-gnu-gcc-9.4.0 (GCC) 9.4.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP Wed Aug 25 11:52:19 CEST 2021 [ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=UUID=4B20-2924 disk=UUID=99facca3-79b3-44a5-ac01-7b5528b1eda1 quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P5KPL-SE, BIOS 0701 08/20/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3010.656 MHz processor [ 0.000908] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000911] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000916] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000 [ 0.000920] MTRR default type: uncachable [ 0.000921] MTRR fixed ranges enabled: [ 0.000923] 00000-9FFFF write-back [ 0.000924] A0000-BFFFF uncachable [ 0.000925] C0000-DFFFF write-protect [ 0.000927] E0000-EFFFF write-through [ 0.000928] F0000-FFFFF write-protect [ 0.000929] MTRR variable ranges enabled: [ 0.000930] 0 base 000000000 mask F80000000 write-back [ 0.000931] 1 disabled [ 0.000932] 2 disabled [ 0.000933] 3 disabled [ 0.000933] 4 disabled [ 0.000934] 5 disabled [ 0.000935] 6 disabled [ 0.000936] 7 disabled [ 0.002253] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.011714] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.018417] check: Scanning 1 areas for low memory corruption [ 0.018544] ACPI: Early table checksum verification disabled [ 0.018548] ACPI: RSDP 0x00000000000FB6B0 000014 (v00 ACPIAM) [ 0.018552] ACPI: RSDT 0x000000007FF90000 000040 (v01 DELL PE_SC3 08001020 MSFT 00000097) [ 0.018558] ACPI: FACP 0x000000007FF90200 000084 (v02 DELL PE_SC3 08001020 MSFT 00000097) [ 0.018564] ACPI: DSDT 0x000000007FF905C0 007DEC (v01 A1103 A1103000 00000000 INTL 20060113) [ 0.018568] ACPI: FACS 0x000000007FF9E000 000040 [ 0.018572] ACPI: SLIC 0x00000000000FF200 000176 (v01 DELL PE_SC3 00000001 MSFT 00000001) [ 0.018576] ACPI: APIC 0x000000007FF90390 00006C (v01 DELL OEMAPIC 08001020 MSFT 00000097) [ 0.018580] ACPI: MCFG 0x000000007FF90400 00003C (v01 DELL OEMMCFG 08001020 MSFT 00000097) [ 0.018583] ACPI: OEMB 0x000000007FF9E040 000080 (v01 DELL AMI_OEM 08001020 MSFT 00000097) [ 0.018587] ACPI: HPET 0x000000007FF983B0 000038 (v01 DELL OEMHPET 08001020 MSFT 00000097) [ 0.018591] ACPI: GSCI 0x000000007FF9E0C0 002024 (v01 A_MI GMCHSCI 08001020 MSFT 00000097) [ 0.018595] ACPI: Reserving FACP table memory at [mem 0x7ff90200-0x7ff90283] [ 0.018596] ACPI: Reserving DSDT table memory at [mem 0x7ff905c0-0x7ff983ab] [ 0.018597] ACPI: Reserving FACS table memory at [mem 0x7ff9e000-0x7ff9e03f] [ 0.018598] ACPI: Reserving SLIC table memory at [mem 0xff200-0xff375] [ 0.018599] ACPI: Reserving APIC table memory at [mem 0x7ff90390-0x7ff903fb] [ 0.018600] ACPI: Reserving MCFG table memory at [mem 0x7ff90400-0x7ff9043b] [ 0.018601] ACPI: Reserving OEMB table memory at [mem 0x7ff9e040-0x7ff9e0bf] [ 0.018602] ACPI: Reserving HPET table memory at [mem 0x7ff983b0-0x7ff983e7] [ 0.018603] ACPI: Reserving GSCI table memory at [mem 0x7ff9e0c0-0x7ffa00e3] [ 0.018612] ACPI: Local APIC address 0xfee00000 [ 0.018645] No NUMA configuration found [ 0.018646] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff] [ 0.018650] NODE_DATA(0) allocated [mem 0x7ff8c000-0x7ff8ffff] [ 0.018662] Zone ranges: [ 0.018663] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018665] DMA32 [mem 0x0000000001000000-0x000000007ff8ffff] [ 0.018667] Normal empty [ 0.018668] Movable zone start for each node [ 0.018669] Early memory node ranges [ 0.018670] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.018671] node 0: [mem 0x0000000000100000-0x000000007ff8ffff] [ 0.018673] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff] [ 0.018675] On node 0 totalpages: 524078 [ 0.018676] DMA zone: 64 pages used for memmap [ 0.018677] DMA zone: 21 pages reserved [ 0.018678] DMA zone: 3998 pages, LIFO batch:0 [ 0.018679] DMA32 zone: 8127 pages used for memmap [ 0.018680] DMA32 zone: 520080 pages, LIFO batch:63 [ 0.018684] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018728] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.030840] On node 0, zone DMA32: 112 pages in unavailable ranges [ 0.030965] ACPI: PM-Timer IO Port: 0x808 [ 0.030968] ACPI: Local APIC address 0xfee00000 [ 0.030984] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.030987] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.030989] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.030991] ACPI: IRQ0 used by override. [ 0.030992] ACPI: IRQ9 used by override. [ 0.030994] Using ACPI (MADT) for SMP configuration information [ 0.030996] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.031002] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.031017] [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.031019] Booting paravirtualized kernel on bare hardware [ 0.031022] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.031030] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.031656] percpu: Embedded 52 pages/cpu s175960 r8192 d28840 u524288 [ 0.031661] pcpu-alloc: s175960 r8192 d28840 u524288 alloc=1*2097152 [ 0.031663] pcpu-alloc: [0] 0 1 2 3 [ 0.031688] Built 1 zonelists, mobility grouping on. Total pages: 515866 [ 0.031690] Policy zone: DMA32 [ 0.031692] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=UUID=4B20-2924 disk=UUID=99facca3-79b3-44a5-ac01-7b5528b1eda1 quiet [ 0.032325] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.032567] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.032614] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.047942] Memory: 1934252K/2096312K available (24590K kernel code, 2898K rwdata, 84468K rodata, 7604K init, 1588K bss, 161800K reserved, 0K cma-reserved) [ 0.047997] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.048010] Kernel/User page tables isolation: enabled [ 0.048042] ftrace: allocating 71465 entries in 280 pages [ 0.074012] ftrace: allocated 280 pages with 3 groups [ 0.074135] rcu: Hierarchical RCU implementation. [ 0.074137] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.074138] Rude variant of Tasks RCU enabled. [ 0.074139] Tracing variant of Tasks RCU enabled. [ 0.074140] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.074141] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.075123] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.075333] random: get_random_bytes called from start_kernel+0x603/0x7c1 with crng_init=0 [ 0.078934] Console: colour VGA+ 80x25 [ 0.078946] printk: console [tty0] enabled [ 0.078958] ACPI: Core revision 20200925 [ 0.079037] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.079049] APIC: Switch to symmetric I/O mode setup [ 0.079404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.095715] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b6597d4160, max_idle_ns: 440795235755 ns [ 0.095720] Calibrating delay loop (skipped), value calculated using timer frequency.. 6023.20 BogoMIPS (lpj=10035520) [ 0.095723] pid_max: default: 32768 minimum: 301 [ 0.095759] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.095770] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.095998] process: using mwait in idle threads [ 0.096002] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.096003] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.096006] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.096008] Spectre V2 : Mitigation: Full generic retpoline [ 0.096009] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.096010] Speculative Store Bypass: Vulnerable [ 0.096012] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.096115] Freeing SMP alternatives memory: 56K [ 0.189246] smpboot: CPU0: Intel(R) Xeon(R) CPU L3110 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.189377] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.189384] ... version: 2 [ 0.189385] ... bit width: 40 [ 0.189386] ... generic registers: 2 [ 0.189387] ... value mask: 000000ffffffffff [ 0.189388] ... max period: 000000007fffffff [ 0.189389] ... fixed-purpose events: 3 [ 0.189390] ... event mask: 0000000700000003 [ 0.189491] rcu: Hierarchical SRCU implementation. [ 0.190003] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.190059] smp: Bringing up secondary CPUs ... [ 0.190146] x86: Booting SMP configuration: [ 0.190148] .... node #0, CPUs: #1 [ 0.194416] smp: Brought up 1 node, 2 CPUs [ 0.194416] smpboot: Max logical packages: 2 [ 0.194416] smpboot: Total of 2 processors activated (12047.40 BogoMIPS) [ 0.195857] devtmpfs: initialized [ 0.195926] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes) [ 0.195926] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.195926] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.195926] pinctrl core: initialized pinctrl subsystem [ 0.196036] NET: Registered protocol family 16 [ 0.196246] thermal_sys: Registered thermal governor 'step_wise' [ 0.196258] cpuidle: using governor ladder [ 0.196262] cpuidle: using governor menu [ 0.196323] ACPI: bus type PCI registered [ 0.196386] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.196388] PCI: not using MMCONFIG [ 0.196392] PCI: Using configuration type 1 for base access [ 0.203246] Kprobes globally optimized [ 0.705936] cryptd: max_cpu_qlen set to 1000 [ 0.705936] "cryptomgr_test" (50) uses obsolete ecb(arc4) skcipher [ 0.706255] raid6: skip pq benchmark and using algorithm sse2x4 [ 0.706255] raid6: using ssse3x2 recovery algorithm [ 0.706255] ACPI: Added _OSI(Module Device) [ 0.706255] ACPI: Added _OSI(Processor Device) [ 0.706255] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.706255] ACPI: Added _OSI(Processor Aggregator Device) [ 0.706255] ACPI: Added _OSI(Linux-Dell-Video) [ 0.706255] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.706255] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.710074] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.712390] ACPI: Dynamic OEM Table Load: [ 0.712390] ACPI: SSDT 0xFFFF9ACB413AF000 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.712390] ACPI: Dynamic OEM Table Load: [ 0.712390] ACPI: SSDT 0xFFFF9ACB413AEE00 000143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.712512] ACPI: Interpreter enabled [ 0.712528] ACPI: (supports S0 S1 S3 S5) [ 0.712530] ACPI: Using IOAPIC for interrupt routing [ 0.712554] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.713643] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.713656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.713894] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.719527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.719532] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.719537] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.719544] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.719614] PCI host bridge to bus 0000:00 [ 0.719617] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.719618] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.719620] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.719621] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.719623] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window] [ 0.719625] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.719636] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.719727] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.719764] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.719881] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.719896] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit] [ 0.719960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.720041] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.720104] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.720207] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.720274] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.720371] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.720406] pci 0000:00:1d.0: reg 0x20: [io 0xb480-0xb49f] [ 0.720504] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.720539] pci 0000:00:1d.1: reg 0x20: [io 0xb800-0xb81f] [ 0.720638] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.720673] pci 0000:00:1d.2: reg 0x20: [io 0xb880-0xb89f] [ 0.720771] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.720806] pci 0000:00:1d.3: reg 0x20: [io 0xbc00-0xbc1f] [ 0.720913] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.720927] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff] [ 0.720994] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.721085] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.721215] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.721284] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.721288] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.721291] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.721394] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.721407] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.721414] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.721421] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] [ 0.721429] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] [ 0.721436] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.721451] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.721453] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.721454] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.721455] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.721539] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.721550] pci 0000:00:1f.2: reg 0x10: [io 0xb400-0xb407] [ 0.721556] pci 0000:00:1f.2: reg 0x14: [io 0xb080-0xb083] [ 0.721562] pci 0000:00:1f.2: reg 0x18: [io 0xb000-0xb007] [ 0.721569] pci 0000:00:1f.2: reg 0x1c: [io 0xac00-0xac03] [ 0.721575] pci 0000:00:1f.2: reg 0x20: [io 0xa880-0xa88f] [ 0.721605] pci 0000:00:1f.2: PME# supported from D3hot [ 0.721689] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.721735] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.721856] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000 [ 0.721871] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.721883] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.721895] pci 0000:01:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref] [ 0.721904] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.721912] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref] [ 0.721995] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 0.722042] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.722056] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff] [ 0.722194] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.722218] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.722220] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.722222] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.722225] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.722257] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.722315] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.722334] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.722358] pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref] [ 0.722373] pci 0000:02:00.0: reg 0x20: [mem 0xfbfe0000-0xfbfeffff 64bit pref] [ 0.722386] pci 0000:02:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref] [ 0.722465] pci 0000:02:00.0: supports D1 D2 [ 0.722466] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.722559] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.722563] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.722565] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.722570] pci 0000:00:1c.3: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.722584] pci_bus 0000:04: extended config space not accessible [ 0.722606] pci 0000:04:00.0: [1102:0002] type 00 class 0x040100 [ 0.722620] pci 0000:04:00.0: reg 0x10: [io 0xe880-0xe89f] [ 0.722685] pci 0000:04:00.0: supports D1 D2 [ 0.722723] pci 0000:04:00.1: [1102:7002] type 00 class 0x098000 [ 0.722736] pci 0000:04:00.1: reg 0x10: [io 0xec00-0xec07] [ 0.722801] pci 0000:04:00.1: supports D1 D2 [ 0.722872] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.722875] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.722881] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.722883] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.722884] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.722886] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.722887] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff window] (subtractive decode) [ 0.723584] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.723640] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.723696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.723751] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.723805] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.723861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.723917] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.723972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.724064] iommu: Default domain type: Passthrough [ 0.725727] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.725729] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.725732] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.725733] vgaarb: loaded [ 0.725798] SCSI subsystem initialized [ 0.725805] libata version 3.00 loaded. [ 0.725805] ACPI: bus type USB registered [ 0.725805] usbcore: registered new interface driver usbfs [ 0.725805] usbcore: registered new interface driver hub [ 0.725805] usbcore: registered new device driver usb [ 0.725815] pps_core: LinuxPPS API ver. 1 registered [ 0.725816] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti *@.> [ 0.725819] PTP clock support registered [ 0.725862] Advanced Linux Sound Architecture Driver Initialized. [ 0.725993] PCI: Using ACPI for IRQ routing [ 0.727147] PCI: pci_cache_line_size set to 64 bytes [ 0.727186] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.727188] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff] [ 0.727278] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.727294] clocksource: Switched to clocksource tsc-early [ 0.920928] FS-Cache: Loaded [ 0.920961] pnp: PnP ACPI init [ 0.921061] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.921069] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.921143] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.921521] pnp 00:02: [dma 3] [ 0.921627] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.921688] system 00:03: [io 0x0290-0x0297] has been reserved [ 0.921694] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.921801] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.921803] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.921804] system 00:04: [io 0x0480-0x04bf] has been reserved [ 0.921806] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.921808] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.921813] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.921913] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.921919] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.922033] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.922035] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.922040] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.922261] pnp 00:07: [dma 0 disabled] [ 0.922312] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.922373] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.922378] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.922532] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.922534] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.922536] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.922538] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.922543] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.922661] pnp: PnP ACPI: found 10 devices [ 0.928511] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.928575] NET: Registered protocol family 2 [ 0.928664] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.929015] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.929026] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.929075] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.929171] TCP: Hash tables configured (established 16384 bind 16384) [ 0.929220] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.929234] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.929279] NET: Registered protocol family 1 [ 0.929397] RPC: Registered named UNIX socket transport module. [ 0.929398] RPC: Registered udp transport module. [ 0.929399] RPC: Registered tcp transport module. [ 0.929400] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.929408] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.929410] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.929412] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.929420] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff] [ 0.929424] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.929426] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.929429] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.929431] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.929435] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.929437] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.929440] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.929442] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.929445] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.929448] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.929453] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.929455] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.929458] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.929461] pci 0000:00:1c.3: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.929466] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.929468] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.929476] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.929478] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.929479] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.929481] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.929482] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window] [ 0.929484] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.929485] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff] [ 0.929487] pci_bus 0000:01: resource 2 [mem 0xe6000000-0xefffffff 64bit pref] [ 0.929488] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.929489] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff] [ 0.929491] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.929492] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.929494] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.929495] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.929497] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.929498] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.929500] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.929501] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.929502] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.929504] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff window] [ 0.930148] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.930177] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.930188] PCI: CLS 32 bytes, default 64 [ 0.935129] check: Scanning for low memory corruption every 60 seconds [ 0.937384] Initialise system trusted keyrings [ 0.937414] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 0.939048] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.939092] FS-Cache: Netfs 'nfs' registered for caching [ 0.939195] NFS: Registering the id_resolver key type [ 0.939200] Key type id_resolver registered [ 0.939201] Key type id_legacy registered [ 0.939220] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.939223] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.939306] FS-Cache: Netfs 'cifs' registered for caching [ 0.939360] Key type cifs.idmap registered [ 0.948829] NET: Registered protocol family 38 [ 0.948831] xor: measuring software checksum speed [ 0.949470] prefetch64-sse : 15606 MB/sec [ 0.950204] generic_sse : 13431 MB/sec [ 0.950205] xor: using function: prefetch64-sse (15606 MB/sec) [ 0.950209] Key type asymmetric registered [ 0.950211] Asymmetric key parser 'x509' registered [ 0.950212] Asymmetric key parser 'pkcs8' registered [ 0.950218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.950220] io scheduler mq-deadline registered [ 0.950221] io scheduler kyber registered [ 0.950243] io scheduler bfq registered [ 0.950465] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.950801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.950825] ACPI: Power Button [PWRB] [ 0.950863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.950899] ACPI: Power Button [PWRF] [ 0.951177] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.951243] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.951745] Linux agpgart interface v0.103 [ 0.951849] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel @.> [ 0.951850] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 0.951870] [drm] radeon kernel modesetting enabled. [ 0.951915] [drm] amdgpu kernel modesetting enabled. [ 0.951945] CRAT table not found [ 0.951947] Virtual CRAT table created for CPU [ 0.951958] amdgpu: Topology: Add CPU node [ 0.952237] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 0.953116] Console: switching to colour dummy device 80x25 [ 0.953191] nouveau 0000:01:00.0: NVIDIA GK208B (b06070b1) [ 1.062421] nouveau 0000:01:00.0: bios: version 80.28.7a.00.16 [ 1.063074] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5 [ 1.945748] tsc: Refined TSC clocksource calibration: 3010.499 MHz [ 1.945752] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6503533a0, max_idle_ns: 440795237354 ns [ 1.945762] clocksource: Switched to clocksource tsc [ 2.171122] [TTM] Zone kernel: Available graphics memory: 967284 KiB [ 2.171124] [TTM] Initializing pool allocator [ 2.171127] [TTM] Initializing DMA pool allocator [ 2.171137] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 2.171139] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.171142] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.171144] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.171146] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 2.171148] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 2.171149] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 2.171151] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 2.171152] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 2.171154] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 2.172889] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 2.394061] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo (ptrval) [ 2.394099] fbcon: nouveaudrmfb (fb0) is primary device [ 2.437527] Console: switching to colour frame buffer device 240x67 [ 2.439512] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 2.439693] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.441484] brd: module loaded [ 2.441505] loop: module loaded [ 2.444959] usbcore: registered new interface driver rtsx_usb [ 2.445039] Loading iSCSI transport class v2.0-870. [ 2.445203] iscsi: registered transport (tcp) [ 2.445204] megasas: 07.714.04.00-rc1 [ 2.445453] ata_piix 0000:00:1f.1: version 2.13 [ 2.446494] scsi host0: ata_piix [ 2.446602] scsi host1: ata_piix [ 2.446640] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.446642] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.446717] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.447572] scsi host2: ata_piix [ 2.447661] scsi host3: ata_piix [ 2.447697] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 22 [ 2.447698] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 22 [ 2.448164] tun: Universal TUN/TAP device driver, 1.6 [ 2.448341] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 2.448392] e100: Intel(R) PRO/100 Network Driver [ 2.448393] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.448406] e1000: Intel(R) PRO/1000 Network Driver [ 2.448407] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.448421] e1000e: Intel(R) PRO/1000 Network Driver [ 2.448421] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.448440] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.448441] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.448452] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.448453] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.448492] ixgb: Intel(R) PRO/10GbE Network Driver [ 2.448493] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 2.448505] ice: Intel(R) Ethernet Connection E800 Series Linux Driver [ 2.448506] ice: Copyright (c) 2018, Intel Corporation. [ 2.448542] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 2.448566] sky2: driver version 1.30 [ 2.448636] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.449534] libphy: r8169: probed [ 2.450055] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 00:24:8c:ba:0e:bd, XID 3c4, IRQ 28 [ 2.450058] r8169 0000:02:00.0 eth0: jumbo features [frames: 6122 bytes, tx checksumming: ko] [ 2.450150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.450153] ehci-pci: EHCI PCI platform driver [ 2.450243] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.450250] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.450261] ehci-pci 0000:00:1d.7: debug port 1 [ 2.454163] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 2.454184] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00 [ 2.465728] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.465901] hub 1-0:1.0: USB hub found [ 2.465913] hub 1-0:1.0: 8 ports detected [ 2.466084] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.466094] ohci-pci: OHCI PCI platform driver [ 2.466105] uhci_hcd: USB Universal Host Controller Interface driver [ 2.466170] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.466175] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.466181] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.466197] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 2.466309] hub 2-0:1.0: USB hub found [ 2.466315] hub 2-0:1.0: 2 ports detected [ 2.466462] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.466467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.466473] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.466494] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800 [ 2.466611] hub 3-0:1.0: USB hub found [ 2.466617] hub 3-0:1.0: 2 ports detected [ 2.466760] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.466767] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.466772] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.466794] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880 [ 2.466907] hub 4-0:1.0: USB hub found [ 2.466913] hub 4-0:1.0: 2 ports detected [ 2.467055] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.467060] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.467065] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.467086] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 [ 2.467197] hub 5-0:1.0: USB hub found [ 2.467203] hub 5-0:1.0: 2 ports detected [ 2.467345] usbcore: registered new interface driver uas [ 2.467368] usbcore: registered new interface driver usb-storage [ 2.467394] i8042: PNP: No PS/2 controller found. [ 2.467394] i8042: Probing ports directly. [ 2.470176] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.470181] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.470263] mousedev: PS/2 mouse device common for all mice [ 2.470441] rtc_cmos 00:01: RTC can wake from S4 [ 2.470599] rtc_cmos 00:01: registered as rtc0 [ 2.470620] rtc_cmos 00:01: setting system clock to 2021-09-09T10:10:59 UTC (1631182259) [ 2.470638] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.470654] i2c /dev entries driver [ 2.470993] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.471038] i2c i2c-12: 2/2 memory slots populated (from DMI) [ 2.472922] i2c i2c-12: Successfully instantiated SPD at 0x50 [ 2.474160] w83627ehf: Found W83627DHG chip at 0x290 [ 2.474170] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (_SB.PCI0.SBRG.SIOR.HWRE) (20200925/utaddress-204) [ 2.474175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.474233] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: @. [ 2.474235] intel_pstate: CPU model not supported [ 2.474250] sdhci: Secure Digital Host Controller Interface driver [ 2.474251] sdhci: Copyright(c) Pierre Ossman [ 2.474294] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.474296] No iBFT detected. [ 2.474306] hid: raw HID events driver (C) Jiri Kosina [ 2.474596] usbcore: registered new interface driver usbhid [ 2.474597] usbhid: USB HID core driver [ 2.474853] NET: Registered protocol family 10 [ 2.475080] Segment Routing with IPv6 [ 2.475097] NET: Registered protocol family 17 [ 2.475118] Key type dns_resolver registered [ 2.475217] microcode: sig=0x1067a, pf=0x1, revision=0xa0b [ 2.475244] microcode: Microcode Update Driver: v2.2. [ 2.475247] IPI shorthand broadcast: enabled [ 2.475256] sched_clock: Marking stable (2471492398, 3747188)->(2507516585, -32276999) [ 2.475310] Loading compiled-in X.509 certificates [ 2.475512] Btrfs loaded, crc32c=crc32c-generic [ 2.475837] printk: console [netcon0] enabled [ 2.475838] netconsole: network logging started [ 2.476076] ALSA device list: [ 2.476079] No soundcards found. [ 2.670974] ata1.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100 [ 2.670977] ata1.00: 156301488 sectors, multi 16: LBA48 [ 2.715730] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.745939] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 K PQ: 0 ANSI: 5 [ 2.746119] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.746170] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.746180] sd 0:0:0:0: [sda] Write Protect is off [ 2.746182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.746196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.802083] sda: sda1 sda2 [ 2.802455] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.805364] Freeing unused kernel image (initmem) memory: 7604K [ 2.815727] Write protecting the kernel read-only data: 112640k [ 2.816583] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 2.817121] Freeing unused kernel image (rodata/data gap) memory: 1548K [ 2.817153] Run /init as init process [ 2.817155] with arguments: [ 2.817156] /init [ 2.817156] with environment: [ 2.817158] HOME=/ [ 2.817158] TERM=linux [ 2.817159] BOOT_IMAGE=/KERNEL [ 2.817160] boot=UUID=4B20-2924 [ 2.817161] disk=UUID=99facca3-79b3-44a5-ac01-7b5528b1eda1 [ 2.848864] Checking disk(s): UUID=4B20-2924 UUID=99facca3-79b3-44a5-ac01-7b5528b1eda1 [ 2.867765] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2.867846] usb-storage 1-1:1.0: Quirks match for vid 05e3 pid 0723: 8000 [ 2.867870] scsi host4: usb-storage 1-1:1.0 [ 3.189065] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 3.245780] random: fast init done [ 3.397366] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:1C4F:0002.0001/input/input5 [ 3.452535] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 3.468391] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input6 [ 3.522471] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input7 [ 3.522536] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 3.893866] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0 [ 3.894059] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 4.227508] fsck: CP437: Invalid argument [ 4.227585] fsck: fsck.fat 4.1 (2017-01-24) [ 4.227685] fsck: /dev/sda1: 12 files, 9430/32764 clusters [ 4.227762] fsck: Storage: recovering journal [ 4.227892] fsck: Storage: clean, 1826/4759552 files, 608603/19012246 blocks [ 4.312360] sd 4:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.97 GB/1.83 GiB) [ 4.313606] sd 4:0:0:0: [sdb] Write Protect is off [ 4.313609] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4.314856] sd 4:0:0:0: [sdb] No Caching mode page found [ 4.314859] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4.332362] sdb: [ 4.335857] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.894385] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.457438] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.472454] systemd[1]: Detected architecture x86-64. [ 5.489626] systemd[1]: Set hostname to <Lakka>. [ 5.594486] random: systemd: uninitialized urandom read (16 bytes read) [ 5.594566] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.594641] random: systemd: uninitialized urandom read (16 bytes read) [ 5.594880] systemd[1]: Listening on udev Control Socket. [ 5.594904] random: systemd: uninitialized urandom read (16 bytes read) [ 5.595192] systemd[1]: Listening on Journal Socket. [ 5.596546] systemd[1]: Starting Setup NTP servers for timesyncd... [ 5.597525] systemd[1]: Mounting POSIX Message Queue File System... [ 5.616535] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.616852] systemd[1]: Created slice User and Session Slice. [ 5.627957] random: crng init done [ 5.627960] random: 7 urandom warning(s) missed due to ratelimiting [ 5.732466] kernel-overlays-setup: setup base modules [ 5.764938] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.60 [ 5.775130] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 5.775181] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 5.791242] kernel-overlays-setup: done [ 6.063676] systemd-journald[234]: Received request to flush runtime journal from PID 1 [ 8.079596] intel_rng: FWH not detected [ 8.166325] intel_powerclamp: No package C-state available [ 8.192674] intel_powerclamp: No package C-state available [ 8.581920] snd_hda_intel 0000:01:00.1: Disabling MSI [ 8.581928] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 8.591557] snd_hda_intel 0000:00:1b.0: no codecs found! [ 8.677240] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops 0xffffffff85c858d0) [ 8.679670] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8 [ 8.679720] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 8.679767] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 8.679812] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 8.679858] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 10.605988] RTL8211B Gigabit Ethernet r8169-0-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE) [ 10.669271] r8169 0000:02:00.0 eth0: Link is Down [ 13.153620] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 13.153632] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.176592] 8021q: 802.1Q VLAN Support v1.8 [ 18.154710] CIFS: Attempting to mount \192.168.1.200\roms [ 18.154734] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount. [ 20.965377] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.

exit

@BDJoe360 Thank you.

@ToKe79 We may need to add those kernel modules as I wrote

Needed for CONFIG_JOYSTICK_GAMECON

@gouchi I see, I only enabled CONFIG_PARPORT. will push fix asap.

@BDJoe360 please, test with next nightly (2021-09-11 and later) after it is built. if the issue is still present, please comment here/reopen.

OK, I've tried lakka-generic.x86_ 64-nightly-20210911。 Moreover, the psx handle can be set and used normally, but there is still a problem.

The problem is that the device index still displays disabled, and the psx controller is not displayed. I hope this problem can be corrected.

Finally, upload the Log of lakka-generic.x86 64-nightly-2020-08-08 legacy I normally used before and The log of lakka-generic.x86_ 64-nightly-2021-09-11 is expected to help solve this problem.

Log of 2020-08-08:

login as: Error writing session log (raw mode) to file: putty.log root @.***'s password: ###########################################

Lakka - The DIY retro emulation console

...... visit http://www.lakka.tv ......

###########################################

Lakka (official): devel-20200808003424-r28355-gaf3cd2648f (Generic.x86_64) Lakka:~ # lsmod Module Size Used by gamecon 20480 0 8021q 24576 0 snd_hda_codec_hdmi 45056 1 snd_emu10k1 143360 0 snd_util_mem 16384 1 snd_emu10k1 snd_ac97_codec 110592 1 snd_emu10k1 ac97_bus 16384 1 snd_ac97_codec snd_rawmidi 24576 1 snd_emu10k1 rng_core 16384 0 snd_hda_intel 28672 2 snd_hda_codec 90112 2 snd_hda_intel,snd_hda_codec_hdmi snd_hda_core 49152 3 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi snd_hwdep 16384 2 snd_emu10k1,snd_hda_codec parport_pc 36864 1 parport 36864 2 gamecon,parport_pc asus_atk0110 20480 0 overlay 49152 7 applespi 28672 0 Lakka:~ # dmesg [ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 4.11.12-rt14 @.*) (gcc version 9.2.0 (G CC) ) #1 SMP PREEMPT RT Tue Jan 21 03:44:14 CET 2020 [ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=UUID=0808-0218 disk=UUID=1a a4db76-ef24-48d3-9052-3dff684a02fb portable quiet vt.global_cursor_default=0 log level=2 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi sters' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P5KPL-SE, BIOS 0701 08/20/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff 8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x03cf1000, 0x03cf1fff] PGTABLE [ 0.000000] BRK [0x03cf2000, 0x03cf2fff] PGTABLE [ 0.000000] BRK [0x03cf3000, 0x03cf3fff] PGTABLE [ 0.000000] BRK [0x03cf4000, 0x03cf4fff] PGTABLE [ 0.000000] BRK [0x03cf5000, 0x03cf5fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB6B0 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000007FF90000 000040 (v01 DELL PE_SC3 0800102 0 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007FF90200 000084 (v02 DELL PE_SC3 0800102 0 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007FF905C0 007DEC (v01 A1103 A1103000 0000000 0 INTL 20060113) [ 0.000000] ACPI: FACS 0x000000007FF9E000 000040 [ 0.000000] ACPI: SLIC 0x00000000000FF200 000176 (v01 DELL PE_SC3 0000000 1 MSFT 00000001) [ 0.000000] ACPI: APIC 0x000000007FF90390 00006C (v01 DELL OEMAPIC 0800102 0 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007FF90400 00003C (v01 DELL OEMMCFG 0800102 0 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007FF9E040 000080 (v01 DELL AMI_OEM 0800102 0 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007FF983B0 000038 (v01 DELL OEMHPET 0800102 0 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x000000007FF9E0C0 002024 (v01 A_MI GMCHSCI 0800102 0 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7ff8c000-0x7ff8ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ff8ffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff] [ 0.000000] On node 0 totalpages: 524078 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8127 pages used for memmap [ 0.000000] DMA32 zone: 520080 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nrnode ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff880 s107904 r8192 d31 360 u524288 [ 0.000000] pcpu-alloc: s107904 r8192 d31360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 515866 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosusp end=-1 BOOT_IMAGE=/KERNEL boot=UUID=0808-0218 disk=UUID=1aa4db76-ef24-48d3-9052- 3dff684a02fb portable quiet vt.global_cursor_default=0 loglevel=2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 2016764K/2096312K available (12780K kernel code, 1042K rw data, 25412K rodata, 3464K init, 504K bss, 79548K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3010.450 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer fr equency.. 6020.90 BogoMIPS (lpj=3010450) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.004551] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.004812] Dentry cache hash table entries: 262144 (order: 10, 4194304 bytes ) [ 0.006577] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.007017] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.007021] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.007232] CPU: Physical Processor ID: 0 [ 0.007232] CPU: Processor Core ID: 0 [ 0.007234] process: using mwait in idle threads [ 0.007237] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.007238] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.007307] Freeing SMP alternatives memory: 40K [ 0.008085] smpboot: Max logical packages: 2 [ 0.008438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019000] smpboot: CPU0: Intel(R) Xeon(R) CPU L3110 @ 3.00GHz (f amily: 0x6, model: 0x17, stepping: 0xa) [ 0.022018] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.022028] ... version: 2 [ 0.022029] ... bit width: 40 [ 0.022030] ... generic registers: 2 [ 0.022031] ... value mask: 000000ffffffffff [ 0.022032] ... max period: 000000007fffffff [ 0.022033] ... fixed-purpose events: 3 [ 0.022034] ... event mask: 0000000700000003 [ 0.034163] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM U counter. [ 0.036006] smp: Bringing up secondary CPUs ... [ 0.047015] x86: Booting SMP configuration: [ 0.047017] .... node #0, CPUs: #1 [ 0.001000] calibrate_delay_direct() dropping max bogoMips estimate 0 = 90309 65 [ 0.109024] smp: Brought up 1 node, 2 CPUs [ 0.109024] smpboot: Total of 2 processors activated (12041.56 BogoMIPS) [ 0.110060] sched_clock: Marking stable (110000000, 0)->(247631070, -13763107 0) [ 0.110234] devtmpfs: initialized [ 0.110657] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (2048 00 bytes) [ 0.110710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 1911260446275000 ns [ 0.110731] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.110781] xor: measuring software checksum speed [ 0.120551] prefetch64-sse: 16848.000 MB/sec [ 0.130551] generic_sse: 14168.000 MB/sec [ 0.130553] xor: using function: prefetch64-sse (16848.000 MB/sec) [ 0.130555] pinctrl core: initialized pinctrl subsystem [ 0.130734] NET: Registered protocol family 16 [ 0.131057] cpuidle: using governor ladder [ 0.131568] cpuidle: using governor menu [ 0.131580] PCCT header not found. [ 0.131711] ACPI: bus type PCI registered [ 0.131794] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3 ffffff] (base 0xf0000000) [ 0.131795] PCI: not using MMCONFIG [ 0.131796] PCI: Using configuration type 1 for base access [ 0.153552] raid6: sse2x1 gen() 4878 MB/s [ 0.170545] raid6: sse2x1 xor() 5195 MB/s [ 0.187549] raid6: sse2x2 gen() 5578 MB/s [ 0.204546] raid6: sse2x2 xor() 6373 MB/s [ 0.221543] raid6: sse2x4 gen() 9273 MB/s [ 0.238545] raid6: sse2x4 xor() 7128 MB/s [ 0.238546] raid6: using algorithm sse2x4 gen() 9273 MB/s [ 0.238546] raid6: .... xor() 7128 MB/s, rmw enabled [ 0.238548] raid6: using ssse3x2 recovery algorithm [ 0.238593] ACPI: Added _OSI(Module Device) [ 0.238594] ACPI: Added _OSI(Processor Device) [ 0.238594] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.238595] ACPI: Added _OSI(Processor Aggregator Device) [ 0.238778] ACPI: Executed 1 blocks of module-level executable AML code [ 0.242299] ACPI: Dynamic OEM Table Load: [ 0.242303] ACPI: SSDT 0xFFFF88007CB21800 0001D2 (v01 AMI CPU1PM 0000000 1 INTL 20060113) [ 0.242546] ACPI: Dynamic OEM Table Load: [ 0.242550] ACPI: SSDT 0xFFFF88007CB21A00 000143 (v01 AMI CPU2PM 0000000 1 INTL 20060113) [ 0.243071] ACPI: Interpreter enabled [ 0.243090] ACPI: (supports S0 S1 S3 S5) [ 0.243091] ACPI: Using IOAPIC for interrupt routing [ 0.243120] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3 ffffff] (base 0xf0000000) [ 0.244233] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI mot herboard resources [ 0.244239] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug [ 0.251660] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.251664] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI] [ 0.251668] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.251675] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0 0-3f] only partially covers this bridge [ 0.251761] PCI host bridge to bus 0000:00 [ 0.251763] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.251764] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.251766] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow] [ 0.251767] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff win dow] [ 0.251770] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff win dow] [ 0.251772] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.251779] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.251883] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.251915] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.251960] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.252029] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.252043] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit] [ 0.252102] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.252191] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.252244] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.252294] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.252344] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.252402] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.252451] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.252500] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.252531] pci 0000:00:1d.0: reg 0x20: [io 0xb480-0xb49f] [ 0.252615] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.252663] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.252695] pci 0000:00:1d.1: reg 0x20: [io 0xb800-0xb81f] [ 0.252771] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.252820] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.252852] pci 0000:00:1d.2: reg 0x20: [io 0xb880-0xb89f] [ 0.252928] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.252975] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.253007] pci 0000:00:1d.3: reg 0x20: [io 0xbc00-0xbc1f] [ 0.253083] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.253136] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.253150] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff] [ 0.253216] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.253263] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.253311] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.253391] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.253444] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.253511] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI /GPIO/TCO [ 0.253515] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.253517] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.253627] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.253637] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.253644] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.253651] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] [ 0.253658] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] [ 0.253665] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.253681] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.253682] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.253683] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.253684] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.253773] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.253783] pci 0000:00:1f.2: reg 0x10: [io 0xb400-0xb407] [ 0.253789] pci 0000:00:1f.2: reg 0x14: [io 0xb080-0xb083] [ 0.253795] pci 0000:00:1f.2: reg 0x18: [io 0xb000-0xb007] [ 0.253800] pci 0000:00:1f.2: reg 0x1c: [io 0xac00-0xac03] [ 0.253806] pci 0000:00:1f.2: reg 0x20: [io 0xa880-0xa88f] [ 0.253835] pci 0000:00:1f.2: PME# supported from D3hot [ 0.253927] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.253970] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.254107] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000 [ 0.254120] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.254132] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref ] [ 0.254143] pci 0000:01:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref ] [ 0.254151] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.254159] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref] [ 0.254266] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.254279] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff] [ 0.254437] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.254440] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.254441] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.254444] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bi t pref] [ 0.254484] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.254544] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.254565] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.254589] pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref ] [ 0.254605] pci 0000:02:00.0: reg 0x20: [mem 0xfbfe0000-0xfbfeffff 64bit pref ] [ 0.254615] pci 0000:02:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref] [ 0.254686] pci 0000:02:00.0: supports D1 D2 [ 0.254687] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.257572] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.257577] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.257580] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.257586] pci 0000:00:1c.3: bridge window [mem 0xfbf00000-0xfbffffff 64bi t pref] [ 0.257644] pci 0000:04:00.0: [1102:0002] type 00 class 0x040100 [ 0.257659] pci 0000:04:00.0: reg 0x10: [io 0xe880-0xe89f] [ 0.257737] pci 0000:04:00.0: supports D1 D2 [ 0.257787] pci 0000:04:00.1: [1102:7002] type 00 class 0x098000 [ 0.257799] pci 0000:04:00.1: reg 0x10: [io 0xec00-0xec07] [ 0.257862] pci 0000:04:00.1: supports D1 D2 [ 0.257940] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.257943] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.257948] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (sub tractive decode) [ 0.257950] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (sub tractive decode) [ 0.257951] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff wind ow] (subtractive decode) [ 0.257952] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff wind ow] (subtractive decode) [ 0.257954] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff wind ow] (subtractive decode) [ 0.258816] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.258870] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.258923] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.258975] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.259027] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.259080] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.259133] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.259185] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.259241] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.259353] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.259354] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none [ 0.259359] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.259359] vgaarb: loaded [ 0.259419] SCSI subsystem initialized [ 0.259450] libata version 3.00 loaded. [ 0.259481] ACPI: bus type USB registered [ 0.259503] usbcore: registered new interface driver usbfs [ 0.259515] usbcore: registered new interface driver hub [ 0.259540] usbcore: registered new device driver usb [ 0.259571] pps_core: LinuxPPS API ver. 1 registered [ 0.259571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti *@.> [ 0.259574] PTP clock support registered [ 0.259643] wmi: Mapper loaded [ 0.259661] Advanced Linux Sound Architecture Driver Initialized. [ 0.259662] PCI: Using ACPI for IRQ routing [ 0.260785] PCI: pci_cache_line_size set to 64 bytes [ 0.260833] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.260834] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff] [ 0.261055] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.261089] clocksource: Switched to clocksource hpet [ 0.261154] FS-Cache: Loaded [ 0.261189] pnp: PnP ACPI init [ 0.261253] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.261257] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.261307] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.261846] pnp 00:02: [dma 3] [ 0.261988] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.262080] system 00:03: [io 0x0290-0x0297] has been reserved [ 0.262084] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262234] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.262236] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.262238] system 00:04: [io 0x0480-0x04bf] has been reserved [ 0.262240] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.262242] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.262246] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262381] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.262385] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262543] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.262545] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.262549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262852] pnp 00:07: [dma 0 disabled] [ 0.262912] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.263003] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.263007] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.263189] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.263191] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.263193] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.263195] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.263199] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.263316] pnp: PnP ACPI: found 10 devices [ 0.270052] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns [ 0.270074] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] a dd_size 1000 [ 0.270076] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.270078] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [b us 03] add_size 200000 add_align 100000 [ 0.270102] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff] [ 0.270106] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bi t pref] [ 0.270109] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.270111] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.270113] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.270115] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.270117] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bi t pref] [ 0.270120] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.270122] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.270125] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.270128] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bi t pref] [ 0.270132] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.270134] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.270137] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.270139] pci 0000:00:1c.3: bridge window [mem 0xfbf00000-0xfbffffff 64bi t pref] [ 0.270144] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.270145] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.270153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.270155] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.270156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.270157] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.270158] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window] [ 0.270160] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.270161] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff] [ 0.270162] pci_bus 0000:01: resource 2 [mem 0xe6000000-0xefffffff 64bit pref ] [ 0.270163] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.270165] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff] [ 0.270166] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref ] [ 0.270167] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.270168] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.270169] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref ] [ 0.270171] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.270172] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.270173] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.270174] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.270176] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.270177] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff window] [ 0.270233] NET: Registered protocol family 2 [ 0.270371] TCP established hash table entries: 16384 (order: 5, 131072 bytes ) [ 0.270494] TCP bind hash table entries: 16384 (order: 7, 917504 bytes) [ 0.270695] TCP: Hash tables configured (established 16384 bind 16384) [ 0.270750] UDP hash table entries: 1024 (order: 5, 131072 bytes) [ 0.270795] UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes) [ 0.270881] NET: Registered protocol family 1 [ 0.270967] RPC: Registered named UNIX socket transport module. [ 0.270968] RPC: Registered udp transport module. [ 0.270969] RPC: Registered tcp transport module. [ 0.270970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.272243] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff] [ 0.272259] PCI: CLS 32 bytes, default 64 [ 0.305334] Scanning for low memory corruption every 60 seconds [ 0.305791] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 0.308726] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.308803] FS-Cache: Netfs 'nfs' registered for caching [ 0.308952] NFS: Registering the id_resolver key type [ 0.308959] Key type id_resolver registered [ 0.308960] Key type id_legacy registered [ 0.308964] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.309034] FS-Cache: Netfs 'cifs' registered for caching [ 0.311227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 50) [ 0.311229] io scheduler noop registered [ 0.311299] io scheduler cfq registered (default) [ 0.311300] io scheduler mq-deadline registered [ 0.311619] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.312046] intel_idle: does not run on family 6 model 23 [ 0.312143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.312146] ACPI: Power Button [PWRB] [ 0.312202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut1 [ 0.312203] ACPI: Power Button [PWRF] [ 0.312539] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.333013] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655 0A [ 0.333376] Linux agpgart interface v0.103 [ 0.333661] [drm] radeon kernel modesetting enabled. [ 0.333762] [drm] amdgpu kernel modesetting enabled. [ 0.334278] nouveau 0000:01:00.0: NVIDIA GK208B (b06070b1) [ 0.444437] nouveau 0000:01:00.0: bios: version 80.28.7a.00.16 [ 0.445362] nouveau 0000:01:00.0: priv: HUB0: 085014 ffffffff (1e70820b) [ 0.445370] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5 [ 1.107404] [TTM] Zone kernel: Available graphics memory: 1008402 kiB [ 1.107405] [TTM] Initializing pool allocator [ 1.107410] [TTM] Initializing DMA pool allocator [ 1.107423] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 1.107424] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.107427] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.107428] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.107430] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 1.107432] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 1.107433] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 1.107434] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 1.107436] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 1.107437] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 1.112153] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.112153] [drm] Driver supports precise vblank timestamp query. [ 1.119831] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.187476] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 1.312124] tsc: Refined TSC clocksource calibration: 3010.499 MHz [ 1.312128] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b650353 3a0, max_idle_ns: 440795237354 ns [ 1.404995] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ff ff88007bc9f800 [ 1.405621] fbcon: nouveaufb (fb0) is primary device [ 1.584737] Console: switching to colour frame buffer device 240x67 [ 1.601656] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.601687] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 1.605806] brd: module loaded [ 1.605836] loop: module loaded [ 1.611789] usbcore: registered new interface driver rtsx_usb [ 1.611813] Loading iSCSI transport class v2.0-870. [ 1.611921] iscsi: registered transport (tcp) [ 1.611922] megasas: 07.701.17.00-rc1 [ 1.612171] ata_piix 0000:00:1f.1: version 2.13 [ 1.614204] scsi host0: ata_p

Can you give also RA log with the nighty build ?

Before it was working for the device index, it was not disable with udev driver ?

Did you try also with parport or linuxraw controller driver ?

Thank you.

I always use only the Linux raw controller driver. Nothing else can make psx controller appear.

The RA Log: [INFO] [Config]: Loading default config. [INFO] [Config]: Looking for config in: "/storage/.config/retroarch/retroarch.cfg". [INFO] RetroArch 1.9.9 (Git 36888612eb) [INFO] === Build ======================================= [INFO] CPU Model Name: Intel(R) Xeon(R) CPU L3110 @ 3.00GHz [INFO] 容量: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 [INFO] Built: Sep 11 2021 [INFO] Version: 1.9.9 [INFO] Git: 36888612eb [INFO] ================================================= [INFO] [Input]: Found input driver: "udev". [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565. [INFO] libretro API 版本: 1 [INFO] 未按照 API 编译: 1 [INFO] [Audio]: Set audio input rate to: 48000.00 Hz. [INFO] [Video]: Video @ fullscreen [INFO] [Video]: Starting threaded video driver ... [INFO] [DRM]: Found 3 connectors. [INFO] [DRM]: Connector 0 connected: yes [INFO] [DRM]: Connector 0 has 26 modes. [INFO] [DRM]: Connector 0 assigned to monitor index: #1. [INFO] [DRM]: Connector 1 connected: no [INFO] [DRM]: Connector 1 has 0 modes. [INFO] [DRM]: Connector 2 connected: no [INFO] [DRM]: Connector 2 has 0 modes. [INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60.000000 Hz [INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 59.940201 Hz [INFO] [DRM]: Mode 2: (1920x1080i) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 3: (1920x1080i) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 4: (1920x1080) 1920 x 1080, 50.000000 Hz [INFO] [DRM]: Mode 5: (1920x1080i) 1920 x 1080, 25.000000 Hz [INFO] [DRM]: Mode 6: (1920x1080) 1920 x 1080, 30.000000 Hz [INFO] [DRM]: Mode 7: (1920x1080) 1920 x 1080, 29.970100 Hz [INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 24.000000 Hz [INFO] [DRM]: Mode 9: (1920x1080) 1920 x 1080, 23.976080 Hz [INFO] [DRM]: Mode 10: (1600x900) 1600 x 900, 60.000000 Hz [INFO] [DRM]: Mode 11: (1280x1024) 1280 x 1024, 60.019741 Hz [INFO] [DRM]: Mode 12: (1280x720) 1280 x 720, 60.000000 Hz [INFO] [DRM]: Mode 13: (1280x720) 1280 x 720, 59.940201 Hz [INFO] [DRM]: Mode 14: (1280x720) 1280 x 720, 50.000000 Hz [INFO] [DRM]: Mode 15: (1280x720) 1280 x 720, 30.000000 Hz [INFO] [DRM]: Mode 16: (1280x720) 1280 x 720, 29.970100 Hz [INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 24.000000 Hz [INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 23.976162 Hz [INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60.003841 Hz [INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60.316540 Hz [INFO] [DRM]: Mode 21: (720x576) 720 x 576, 50.000000 Hz [INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60.000000 Hz [INFO] [DRM]: Mode 23: (720x480) 720 x 480, 59.940060 Hz [INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60.000000 Hz [INFO] [DRM]: Mode 25: (640x480) 640 x 480, 59.940475 Hz libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. libGL: Can't open configuration file /etc/drirc: No such file or directory. libGL: Can't open configuration file /storage/.drirc: No such file or directory. [INFO] [GL]: Found GL context: kms [INFO] [GL]: Detecting screen resolution 1920x1080. [INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT [INFO] [EGL]: EGL version: 1.5 [INFO] [EGL]: Current context: 0x7f72bc007060. [INFO] [KMS]: New FB: 1920x1080 (stride: 7680). [INFO] [GL]: Vendor: nouveau, Renderer: NV106. [INFO] [GL]: Version: 4.3 (Compatibility Profile) Mesa 21.2.1. [INFO] [GL]: Using resolution 1920x1080 [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shader driver]: Using GLSL shader backend. [INFO] [GLSL]: Checking GLSL shader support ... [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] Setting up menu pipeline shaders for XMB ... [INFO] [GLSL]: Compiling ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling simple ribbon shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling modern snow shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling bokeh shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Compiling snowflake shader.. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [INFO] [GL]: Using GL_RGB565 for texture uploads. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver. [INFO] [udev]: Keyboard #0: "Power Button" (/dev/input/event1). [INFO] [udev]: Keyboard #1: "Power Button" (/dev/input/event0). [INFO] [udev]: Keyboard #2: "SIGMACHIP USB Keyboard" (/dev/input/event2). [INFO] [udev]: Keyboard #3: "SIGMACHIP USB Keyboard Consumer Control" (/dev/input/event3). [INFO] [udev]: Keyboard #4: "SIGMACHIP USB Keyboard System Control" (/dev/input/event4). [INFO] [Joypad]: Found joypad driver: "linuxraw". [INFO] [Video]: Found display server: null [WARN] [udev]: Mouse grab/ungrab feature unavailable. [INFO] ALSA: Using signed 16-bit format. [INFO] ALSA: Period size: 384 frames [INFO] ALSA: Buffer size: 1536 frames wifi is not available [INFO] [Display]: Found display driver: "gl". [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Font]: Using font rendering backend: freetype. function is no-op

[INFO] [Playlist]: 正在读取历史文件: [/storage/.config/retroarch/content_history.lpl]. [INFO] [Playlist]: 正在读取历史文件: [/storage/.config/retroarch/content_music_history.lpl]. [INFO] [Playlist]: 正在读取历史文件: [/storage/.config/retroarch/content_video_history.lpl]. [INFO] [Playlist]: 正在读取历史文件: [/storage/.config/retroarch/content_image_history.lpl]. [INFO] [Playlist]: 正在加载收藏文件: [/storage/.config/retroarch/content_favorites.lpl]. function is no-op function is no-op function is no-op [INFO] [KMS]: New FB: 1920x1080 (stride: 7680). [INFO] [KMS]: New FB: 1920x1080 (stride: 7680).

Thank you.

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月11日(星期六) 晚上8:49 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

Can you give also RA log with the nighty build ?

Before it was working for the device index, it was not disable with udev driver ?

Did you try also with parport or linuxraw controller driver ?

Thank you.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

Hi,

Can you try to generate joypad autoconfig because I don't see a lot of config files for linuxraw.

Thank you.

Hello, The joypads/Lirnuxaw folder is not generated in nightly-20210911. To be exact, no files are generated in the joypads folder, which is completely empty. In the previous version, a cfg file named psx controller was generated in joypads / lirnuxaw. The contents are as follows: input_a_btn = "1" input_b_btn = "2" input_device = "PSX controller" input_down_axis = "+1" input_driver = "linuxraw" input_l2_btn = "4" input_l_btn = "6" input_left_axis = "-0" input_r2_btn = "5" input_r_btn = "7" input_right_axis = "+0" input_select_btn = "8" input_start_btn = "9" input_up_axis = "-1" input_x_btn = "0" input_y_btn = "3"

Thank you.

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月12日(星期天) 晚上6:35 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

Hi,

Can you try to generate joypad autoconfig because I don't see a lot of config files for linuxraw.

Thank you.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

@BDJoe360: are you talking about /etc/retroarch-joypad-autoconfig/linuxraw or the samba share Joypads? The first one must include these files:

./CHA2.cfg
./Arduino LLC Arduino Leonardo.cfg
./Microsoft X-Box 360 pad.cfg
./Sony Interactive Entertainment Wireless Controller.cfg
./Steam_Controller.cfg
./CHA1.cfg
./Toodles 2008 Cthulhu Mult.cfg
./Bliss_Box_4-Play.cfg

The same contents should be in /tmp/joypads/linuxraw + anything added to the samba share Joypads/linuxraw (which is /storage/joypads/linuxraw).

EDIT: Just to be clear - the samba shares (folders on the /storage partition) are for your own files, Lakka however comes with all configurations available in https://github.com/libretro/retroarch-joypad-autoconfig. RetroArch uses /tmp/joypads, which is /etc/retroarch-joypads-autoconfig overlayed with /storage/joypads.

Hi, I send the details of the question here: https://forums.libretro.com/t/problem-description-of-gamecon-module/34920

Hope it can be solved! Thank you.

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月13日(星期一) 凌晨1:33 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

@BDJoe360: are you talking about /etc/retroarch-joypad-autoconfig/linuxraw or the samba share Joypads? The first one must include these files: ./CHA2.cfg ./Arduino LLC Arduino Leonardo.cfg ./Microsoft X-Box 360 pad.cfg ./Sony Interactive Entertainment Wireless Controller.cfg ./Steam_Controller.cfg ./CHA1.cfg ./Toodles 2008 Cthulhu Mult.cfg ./Bliss_Box_4-Play.cfg
The same contents should be in /tmp/joypads/linuxraw (+ anything added to the samba share Joypads/linuxraw (which is /storage/joypads/linuxraw).

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

There is Save controller profile item - select it and it will create your configuration file in the Joypads folder. Screenshot 2021-09-14 19 54 32

Because I can't upload the picture here, I updated it under the post of the Forum: https://forums.libretro.com/t/problem-description-of-gamecon-module/34920/2

So just to be clear:

the Gamecon driver works - you can use the gamepad, assign buttons, play games
however, when saving the config by Save Controller Profile, the config is not saved and you have to configure the gamepad every time you boot Lakka / restart RetroArch

Is this the case?

Hi, 1.Yes. 2.No, it's not like that.The config is saved.And No have to configure the gamepad every time you boot Lakka / restart RetroArch。As shown in my picture, the item of device index shows disabld instead of psx controller.Moreover, the controller profile config file will not be created in the joypads folder.That's the little problem.

Thankyou.

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月17日(星期五) 下午4:11 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

So just to be clear:

the Gamecon driver works - you can use the gamepad, assign buttons, play games

however, when saving the config by Save Controller Profile, the config is not saved and you have to configure the gamepad every time you boot Lakka / restart RetroArch

Is this the case?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

And you are certain that the config file you have with the 2.x version of Lakka was created by RetroArch? Can you create folder linuxraw in the 3.x joypads and copy the config from 2.x to 3.x? Does that help in any matter? Unfortunately I can't test this myself - I have no Gamecon adapter and even if I had, I don't have a computer with parallel port. I hope someone with the right set-up can help you.

Hi, 1.100% sure. 2.3. X does not create the file，Moreover, even if I copy the files created in the old version to 3. X, the disabled state of the device index cannot be changed. 3.In fact, I suspect that this problem may be caused by the lack of some parameters in the compilation process.

Thankyou.

------------------ 原始邮件 ------------------ 发件人: "libretro/Lakka-LibreELEC" @.>; 发送时间: 2021年9月17日(星期五) 晚上8:44 @.>; @.**@.>; 主题: Re: [libretro/Lakka-LibreELEC] Gamecon module does not work in Lakka 3.3 and the latest nightly version (#1495)

And you are certain that the config file you have with the 2.x version of Lakka was created by RetroArch? Can you create folder linuxraw in the 3.x joypads and copy the config from 2.x to 3.x? Does that help in any matter? Unfortunately I can't test this myself - I have no Gamecon adapter and even if I had, I don't have a computer with parallel port. I hope someone with the right set-up can help you.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

@BDJoe360 Is still an issue with nightly builds ?

Thank you.

libretro / Lakka-LibreELEC

Gamecon module does not work in Lakka 3.3 and the latest nightly version #1495

Lakka - The DIY retro emulation console

...... visit http://www.lakka.tv ......

lsmod

lsusb

dmesg

exit

Lakka - The DIY retro emulation console

...... visit http://www.lakka.tv ......