search

libretro / Lakka-LibreELEC

Lakka is a lightweight Linux distribution that transforms a small computer into a full blown game console.
https://www.lakka.tv
1.75k stars 289 forks source link

Lakka-Generic.x86_64-2.1-devel-20180322000706-r28164-gc90e96b2e #429

Closed jdca closed 6 years ago

jdca commented 6 years ago

I wrote it to my usb-thumb, booted up, resized, rebooted again and now it just shows me the lakka logo "flower thing"

Running it on my Intel Nuc-i5

gouchi commented 6 years ago

As written in the template issue,

It is important to provide logs for debugging as part of your report. Instructions for generating logs can be found in the Troubleshooting Lakka documentation at http://www.lakka.tv/doc/Troubleshooting-Lakka/

Thank you.

jdca commented 6 years ago

Its important to be able to even access the computer before start logging also. Ssh is not on by default and when i press esc, screen turns black.

Maybe I could install Lakka-Generic.x86_64-2.1-devel-20180304204340-r28154-gb552a9a26, enable ssh and then upgrade to Lakka-Generic.x86_64-2.1-devel-20180322000706-r28164-gc90e96b2e and then log somehow?

Thank you.

gouchi commented 6 years ago

We should add it to the doc but you can boot with live ssh

To enable ssh.

jdca commented 6 years ago

Just add it to the boot options with the live or install options.

Lakka:~ # systemctl stop retroarch.service ; retroarch -v [INFO] RetroArch 1.7.1 (Git 29a057ac98) [INFO] === Build ======================================= Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES Built: Mar 22 2018 [INFO] Version: 1.7.1 [INFO] Git: 29a057ac98 [INFO] ================================================= [INFO] Environ SET_PIXEL_FORMAT: RGB565. [INFO] Redirecting save file to "/storage/savefiles/.srm". [INFO] Redirecting savestate to "/storage/savestates/.state". [INFO] Version of libretro API: 1 [INFO] Compiled against API: 1 [INFO] [Audio]: Set audio input rate to: 29970.03 Hz. [INFO] [Video]: Video @ fullscreen [INFO] [Video]: Starting threaded video driver ... [INFO] [DRM]: Found 3 connectors. [INFO] [DRM]: Connector 0 connected: yes [INFO] [DRM]: Connector 0 has 25 modes. [INFO] [DRM]: Connector 0 assigned to monitor index: #1. [INFO] [DRM]: Connector 1 connected: no [INFO] [DRM]: Connector 1 has 0 modes. [INFO] [DRM]: Connector 2 connected: no [INFO] [DRM]: Connector 2 has 0 modes. [INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 50 Hz [INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60 Hz [INFO] [DRM]: Mode 2: (1920x1080) 1920 x 1080, 60 Hz [INFO] [DRM]: Mode 3: (1920x1080i) 1920 x 1080, 60 Hz [INFO] [DRM]: Mode 4: (1920x1080i) 1920 x 1080, 60 Hz [INFO] [DRM]: Mode 5: (1920x1080i) 1920 x 1080, 50 Hz [INFO] [DRM]: Mode 6: (1920x1080) 1920 x 1080, 30 Hz [INFO] [DRM]: Mode 7: (1920x1080) 1920 x 1080, 30 Hz [INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 25 Hz [INFO] [DRM]: Mode 9: (1920x1080) 1920 x 1080, 24 Hz [INFO] [DRM]: Mode 10: (1920x1080) 1920 x 1080, 24 Hz [INFO] [DRM]: Mode 11: (1280x1024) 1280 x 1024, 60 Hz [INFO] [DRM]: Mode 12: (1280x720) 1280 x 720, 60 Hz [INFO] [DRM]: Mode 13: (1280x720) 1280 x 720, 60 Hz [INFO] [DRM]: Mode 14: (1280x720) 1280 x 720, 50 Hz [INFO] [DRM]: Mode 15: (1024x768) 1024 x 768, 60 Hz [INFO] [DRM]: Mode 16: (800x600) 800 x 600, 60 Hz [INFO] [DRM]: Mode 17: (720x576) 720 x 576, 50 Hz [INFO] [DRM]: Mode 18: (720x576i) 720 x 576, 50 Hz [INFO] [DRM]: Mode 19: (720x480) 720 x 480, 60 Hz [INFO] [DRM]: Mode 20: (720x480) 720 x 480, 60 Hz [INFO] [DRM]: Mode 21: (720x480i) 720 x 480, 60 Hz [INFO] [DRM]: Mode 22: (720x480i) 720 x 480, 60 Hz [INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz [INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz [INFO] [GL]: Found GL context: �H������ � [INFO] [GL]: Detecting screen resolution 0x0. Segmentation fault (core dumped)

gouchi commented 6 years ago

Thank you.

Is it possible to have also dmesg and lspci output ?

jdca commented 6 years ago

Lakka:~ # dmesg [ 0.000000] microcode: microcode updated early to revision 0x20, date = 2017-01-27 [ 0.000000] Linux version 4.11.12-rt14 (vudiq@helsinki) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT RT Thu Mar 22 00:09:28 CET 2018 [ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=UUID=2203-3454 disk=UUID=32f4ff39-3888-4b24-9bf3-0cbf0d97346a portable quiet vt.global_cursor_default=0 loglevel=2 ssh [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c83effff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c83f0000-0x00000000c83f6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c83f7000-0x00000000dba85fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dba86000-0x00000000dbb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbb10000-0x00000000dbb29fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dbb2a000-0x00000000dbc92fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbc93000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: /D54250WYK, BIOS WYLPT10H.86A.0021.2013.1017.1606 10/17/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6b0-0x000fd6bf] mapped at [ffff8800000fd6b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x03cf4000, 0x03cf4fff] PGTABLE [ 0.000000] BRK [0x03cf5000, 0x03cf5fff] PGTABLE [ 0.000000] BRK [0x03cf6000, 0x03cf6fff] PGTABLE [ 0.000000] BRK [0x03cf7000, 0x03cf7fff] PGTABLE [ 0.000000] BRK [0x03cf8000, 0x03cf8fff] PGTABLE [ 0.000000] BRK [0x03cf9000, 0x03cf9fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000DBB15080 000084 (v01 INTEL D54250WY 00000015 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DBB24A08 00010C (v05 INTEL D54250WY 00000015 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DBB15198 00F870 (v02 INTEL D54250WY 00000015 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000DBC91080 000040 [ 0.000000] ACPI: APIC 0x00000000DBB24B18 000072 (v03 INTEL D54250WY 00000015 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DBB24B90 000044 (v01 INTEL D54250WY 00000015 AMI 00010013) [ 0.000000] ACPI: LPIT 0x00000000DBB24BD8 00005C (v01 INTEL D54250WY 00000015 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBB24C38 0004F7 (v01 INTEL D54250WY 00000015 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DBB25130 000AD8 (v01 INTEL D54250WY 00000015 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DBB25C08 00003C (v01 INTEL D54250WY 00000015 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DBB25C48 000038 (v01 INTEL D54250WY 00000015 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBB25C80 000315 (v01 INTEL D54250WY 00000015 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DBB25F98 003004 (v01 INTEL D54250WY 00000015 INTL 20091112) [ 0.000000] ACPI: DMAR 0x00000000DBB28FA0 000190 (v01 INTEL D54250WY 00000015 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DBB29130 0000C4 (v01 INTEL D54250WY 00000015 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21fdfa000-0x21fdfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c83effff] [ 0.000000] node 0: [mem 0x00000000c83f7000-0x00000000dba85fff] [ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff] [ 0.000000] On node 0 totalpages: 2078748 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13994 pages used for memmap [ 0.000000] DMA32 zone: 895616 pages, LIFO batch:31 [ 0.000000] Normal zone: 18424 pages used for memmap [ 0.000000] Normal zone: 1179136 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88021fa00000 s107904 r8192 d31360 u524288 [ 0.000000] pcpu-alloc: s107904 r8192 d31360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2046245 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=UUID=2203-3454 disk=UUID=32f4ff39-3888-4b24-9bf3-0cbf0d97346a portable quiet vt.global_cursor_default=0 loglevel=2 ssh [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 8071164K/8314992K available (12836K kernel code, 1042K rwdata, 25292K rodata, 3468K init, 512K bss, 243828K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 1895.518 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.03 BogoMIPS (lpj=1895518) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.010680] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.011537] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes) [ 0.014707] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015473] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.015481] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.015680] CPU: Physical Processor ID: 0 [ 0.015680] CPU: Processor Core ID: 0 [ 0.015684] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.015684] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.015687] process: using mwait in idle threads [ 0.015690] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.015690] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.015756] Freeing SMP alternatives memory: 40K [ 0.016315] smpboot: Max logical packages: 2 [ 0.016892] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026905] TSC deadline timer enabled [ 0.026907] smpboot: CPU0: Intel(R) Core(TM) i5-4250U CPU @ 1.30GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.030025] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.030063] ... version: 3 [ 0.030063] ... bit width: 48 [ 0.030064] ... generic registers: 4 [ 0.030065] ... value mask: 0000ffffffffffff [ 0.030065] ... max period: 00007fffffffffff [ 0.030066] ... fixed-purpose events: 3 [ 0.030066] ... event mask: 000000070000000f [ 0.042111] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.044018] smp: Bringing up secondary CPUs ... [ 0.055022] x86: Booting SMP configuration: [ 0.055023] .... node #0, CPUs: #1 #2 #3 [ 0.260017] smp: Brought up 1 node, 4 CPUs [ 0.260017] smpboot: Total of 4 processors activated (15180.02 BogoMIPS) [ 0.261082] sched_clock: Marking stable (261000000, 0)->(263596685, -2596685) [ 0.261277] devtmpfs: initialized [ 0.261653] PM: Registering ACPI NVS region [mem 0xc83f0000-0xc83f6fff] (28672 bytes) [ 0.261654] PM: Registering ACPI NVS region [mem 0xdbb2a000-0xdbc92fff] (1478656 bytes) [ 0.261717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.261735] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.261781] xor: automatically using best checksumming function avx
[ 0.261785] pinctrl core: initialized pinctrl subsystem [ 0.261934] NET: Registered protocol family 16 [ 0.262228] cpuidle: using governor ladder [ 0.264070] cpuidle: using governor menu [ 0.264073] PCCT header not found. [ 0.264252] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.264255] ACPI: bus type PCI registered [ 0.264370] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.264373] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.264383] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.264520] PCI: Using configuration type 1 for base access [ 0.264691] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.287102] raid6: sse2x1 gen() 7320 MB/s [ 0.304129] raid6: sse2x1 xor() 5789 MB/s [ 0.321151] raid6: sse2x2 gen() 9300 MB/s [ 0.338180] raid6: sse2x2 xor() 6371 MB/s [ 0.355198] raid6: sse2x4 gen() 10867 MB/s [ 0.372224] raid6: sse2x4 xor() 7697 MB/s [ 0.389249] raid6: avx2x1 gen() 14500 MB/s [ 0.406274] raid6: avx2x1 xor() 11001 MB/s [ 0.423295] raid6: avx2x2 gen() 16753 MB/s [ 0.440319] raid6: avx2x2 xor() 11748 MB/s [ 0.457343] raid6: avx2x4 gen() 19597 MB/s [ 0.474368] raid6: avx2x4 xor() 14648 MB/s [ 0.474369] raid6: using algorithm avx2x4 gen() 19597 MB/s [ 0.474370] raid6: .... xor() 14648 MB/s, rmw enabled [ 0.474371] raid6: using avx2x2 recovery algorithm [ 0.474413] ACPI: Added _OSI(Module Device) [ 0.474414] ACPI: Added _OSI(Processor Device) [ 0.474415] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.474416] ACPI: Added _OSI(Processor Aggregator Device) [ 0.474677] ACPI: Executed 1 blocks of module-level executable AML code [ 0.480267] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.481011] ACPI: Dynamic OEM Table Load: [ 0.481017] ACPI: SSDT 0xFFFF880215466000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.481408] ACPI: Dynamic OEM Table Load: [ 0.481413] ACPI: SSDT 0xFFFF88021591E800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.481782] ACPI: Dynamic OEM Table Load: [ 0.481785] ACPI: SSDT 0xFFFF880215486400 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.482994] ACPI: Interpreter enabled [ 0.483016] ACPI: (supports S0 S3 S5) [ 0.483017] ACPI: Using IOAPIC for interrupt routing [ 0.483044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.497432] ACPI: Power Resource [FN00] (off) [ 0.497522] ACPI: Power Resource [FN01] (off) [ 0.497605] ACPI: Power Resource [FN02] (off) [ 0.497687] ACPI: Power Resource [FN03] (off) [ 0.497769] ACPI: Power Resource [FN04] (off) [ 0.498640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.498644] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.498904] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.499064] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.499065] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.499331] PCI host bridge to bus 0000:00 [ 0.499333] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.499334] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.499335] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.499336] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.499337] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.499338] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.499339] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.499340] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.499341] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.499341] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.499343] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.499351] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.499483] pci 0000:00:02.0: [8086:0a26] type 00 class 0x030000 [ 0.499493] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.499499] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.499503] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.499611] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.499618] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.499747] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.499761] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.499814] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.499873] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.499916] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.499932] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3e000-0xf7c3e01f 64bit] [ 0.499995] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.500094] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000 [ 0.500106] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.500113] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff] [ 0.500119] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.500170] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.500227] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.500270] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.500283] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.500343] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.500405] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.500455] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.500470] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.500549] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.500625] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.500671] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.500865] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.500876] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.500882] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.500888] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.500893] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.500899] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.500905] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.500936] pci 0000:00:1f.2: PME# supported from D3hot [ 0.501028] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.501040] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.501057] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.502100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.502208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502259] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502311] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502361] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.502421] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.502809] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.502941] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.502943] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.502949] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.502949] vgaarb: loaded [ 0.503000] SCSI subsystem initialized [ 0.503033] libata version 3.00 loaded. [ 0.503057] ACPI: bus type USB registered [ 0.503077] usbcore: registered new interface driver usbfs [ 0.503087] usbcore: registered new interface driver hub [ 0.503104] usbcore: registered new device driver usb [ 0.503130] pps_core: LinuxPPS API ver. 1 registered [ 0.503131] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.503133] PTP clock support registered [ 0.503216] wmi: Mapper loaded [ 0.503230] Advanced Linux Sound Architecture Driver Initialized. [ 0.503231] PCI: Using ACPI for IRQ routing [ 0.504519] PCI: pci_cache_line_size set to 64 bytes [ 0.504549] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.504551] e820: reserve RAM buffer [mem 0xc83f0000-0xcbffffff] [ 0.504552] e820: reserve RAM buffer [mem 0xdba86000-0xdbffffff] [ 0.504553] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff] [ 0.504777] clocksource: Switched to clocksource hpet [ 0.504845] FS-Cache: Loaded [ 0.504874] pnp: PnP ACPI init [ 0.504948] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.504952] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.505130] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.505132] system 00:01: [io 0xffff] has been reserved [ 0.505133] system 00:01: [io 0xffff] has been reserved [ 0.505135] system 00:01: [io 0xffff] has been reserved [ 0.505136] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.506191] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.506194] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.506196] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.506198] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.506199] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.506204] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.506234] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.506292] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.506295] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.506411] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.506412] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.506415] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.506525] pnp 00:05: Plug and Play ACPI device, IDs NTN0530 (disabled) [ 0.506578] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.506582] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.507101] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.507103] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.507105] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.507106] system 00:07: [mem 0xfe108000-0xfe108fff] has been reserved [ 0.507108] system 00:07: [mem 0xfe10a000-0xfe10afff] has been reserved [ 0.507109] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved [ 0.507111] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.507112] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.507114] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved [ 0.507115] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.507119] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.507456] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.507458] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.507459] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.507461] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.507462] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.507464] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.507465] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.507466] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.507468] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.507470] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.507471] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.507473] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.507476] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.507697] pnp: PnP ACPI: found 9 devices [ 0.514290] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.514303] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.514304] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.514305] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.514306] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.514307] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.514308] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.514309] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.514310] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.514311] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.514312] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window] [ 0.514429] NET: Registered protocol family 2 [ 0.514593] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.515014] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.515813] TCP: Hash tables configured (established 65536 bind 65536) [ 0.515898] UDP hash table entries: 4096 (order: 7, 524288 bytes) [ 0.516058] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes) [ 0.516235] NET: Registered protocol family 1 [ 0.516348] RPC: Registered named UNIX socket transport module. [ 0.516349] RPC: Registered udp transport module. [ 0.516349] RPC: Registered tcp transport module. [ 0.516350] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.516362] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.534137] PCI: CLS 64 bytes, default 64 [ 0.572689] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.572693] software IO TLB [mem 0xd7a86000-0xdba86000] (64MB) mapped at [ffff8800d7a86000-ffff8800dba85fff] [ 0.572836] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 0.572837] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.572838] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.572839] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.572839] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.573350] Scanning for low memory corruption every 60 seconds [ 0.573858] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.576236] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.576294] FS-Cache: Netfs 'nfs' registered for caching [ 0.576422] NFS: Registering the id_resolver key type [ 0.576428] Key type id_resolver registered [ 0.576429] Key type id_legacy registered [ 0.576432] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.576505] FS-Cache: Netfs 'cifs' registered for caching [ 0.578826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.578828] io scheduler noop registered [ 0.578892] io scheduler cfq registered (default) [ 0.578893] io scheduler mq-deadline registered [ 0.579007] intel_idle: MWAIT substates: 0x11142120 [ 0.579009] intel_idle: v0.4.1 model 0x45 [ 0.579313] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.579428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.579431] ACPI: Power Button [PWRB] [ 0.579486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.579488] ACPI: Power Button [PWRF] [ 0.580325] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.580491] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.580492] ACPI: Thermal Zone [TZ00] (28 C) [ 0.580777] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.580796] ACPI: Thermal Zone [TZ01] (30 C) [ 0.581002] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.601674] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.602046] Linux agpgart interface v0.103 [ 0.602091] [drm] radeon kernel modesetting enabled. [ 0.602154] [drm] amdgpu kernel modesetting enabled. [ 0.602521] [drm] Memory usable by graphics device = 2048M [ 0.602523] [drm] Replacing VGA console driver [ 0.603158] Console: switching to colour dummy device 80x25 [ 0.609666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.609668] [drm] Driver supports precise vblank timestamp query. [ 0.612531] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.616324] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 0.617685] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.618314] acpi device:60: registered as cooling_device9 [ 0.618390] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.621775] brd: module loaded [ 0.621814] loop: module loaded [ 0.626950] usbcore: registered new interface driver rtsx_usb [ 0.626974] Loading iSCSI transport class v2.0-870. [ 0.627145] iscsi: registered transport (tcp) [ 0.627146] megasas: 07.701.17.00-rc1 [ 0.627353] ahci 0000:00:1f.2: version 3.0 [ 0.637924] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x8 impl SATA mode [ 0.637929] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.639108] scsi host0: ahci [ 0.639353] scsi host1: ahci [ 0.639567] scsi host2: ahci [ 0.639779] scsi host3: ahci [ 0.639893] ata1: DUMMY [ 0.639894] ata2: DUMMY [ 0.639895] ata3: DUMMY [ 0.639899] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 41 [ 0.640820] tun: Universal TUN/TAP device driver, 1.6 [ 0.640943] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.640998] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 0.640999] Copyright (c) 2007 Atheros Corporation. [ 0.641086] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 0.641131] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 0.641147] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.641148] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.641163] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.641164] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.641181] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.641182] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.641445] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.705344] fbcon: inteldrmfb (fb0) is primary device [ 0.778365] Console: switching to colour frame buffer device 240x67 [ 0.797662] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.903365] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.951429] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.953498] ata4.00: supports DRM functions and may not be fully accessible [ 0.953918] ata4.00: NCQ Send/Recv Log not supported [ 0.953920] ata4.00: ATA-9: Samsung SSD 840 EVO 250GB mSATA, EXT41B6Q, max UDMA/133 [ 0.953922] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.954314] ata4.00: supports DRM functions and may not be fully accessible [ 0.954710] ata4.00: NCQ Send/Recv Log not supported [ 0.954746] ata4.00: configured for UDMA/133 [ 0.954953] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 1B6Q PQ: 0 ANSI: 5 [ 0.955223] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 0.955273] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 0.955290] sd 3:0:0:0: [sda] Write Protect is off [ 0.955292] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.955321] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.958306] sda: sda1 sda2 sda3 sda4 [ 0.959223] sd 3:0:0:0: [sda] Attached SCSI disk [ 0.981041] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c0:3f:d5:63:b5:e4 [ 0.981045] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.981073] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.981113] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.981114] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.981151] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k [ 0.981152] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 0.981326] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 0.981327] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 0.981354] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.981408] sky2: driver version 1.30 [ 0.981691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.981692] ehci-pci: EHCI PCI platform driver [ 0.982133] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.982141] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.982156] ehci-pci 0000:00:1d.0: debug port 2 [ 0.986077] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.986183] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.992943] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.993441] hub 1-0:1.0: USB hub found [ 0.993451] hub 1-0:1.0: 2 ports detected [ 0.993736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.993746] ohci-pci: OHCI PCI platform driver [ 0.993777] uhci_hcd: USB Universal Host Controller Interface driver [ 0.994215] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.994227] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.995309] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 0.995312] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.995707] hub 2-0:1.0: USB hub found [ 0.995719] hub 2-0:1.0: 9 ports detected [ 0.998207] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.998209] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.998435] hub 3-0:1.0: USB hub found [ 0.998443] hub 3-0:1.0: 4 ports detected [ 0.999327] usbcore: registered new interface driver uas [ 0.999345] usbcore: registered new interface driver usb-storage [ 0.999347] i8042: PNP detection disabled [ 1.304822] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.365824] usb 2-2: new full-speed USB device number 2 using xhci_hcd [ 1.429868] hub 1-1:1.0: USB hub found [ 1.430827] hub 1-1:1.0: 8 ports detected [ 1.632838] tsc: Refined TSC clocksource calibration: 1895.614 MHz [ 1.632843] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5f9ea483, max_idle_ns: 881590775302 ns [ 1.708841] usb 2-3: new full-speed USB device number 3 using xhci_hcd [ 2.068016] i8042: No controller found [ 2.068144] mousedev: PS/2 mouse device common for all mice [ 2.068561] rtc_cmos 00:02: RTC can wake from S4 [ 2.068706] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.068762] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.068779] i2c /dev entries driver [ 2.069328] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 2.069374] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.071137] w83627ehf: Found NCT6776F chip at 0xa00 [ 2.071578] w83627ehf w83627ehf.2560: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.071598] intel_pstate: Intel P-state driver initializing [ 2.071787] sdhci: Secure Digital Host Controller Interface driver [ 2.071787] sdhci: Copyright(c) Pierre Ossman [ 2.071843] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.071844] No iBFT detected. [ 2.071869] hidraw: raw HID events driver (C) Jiri Kosina [ 2.077130] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 2.181051] usbcore: registered new interface driver usbhid [ 2.181054] usbhid: USB HID core driver [ 2.181654] NET: Registered protocol family 10 [ 2.182069] Segment Routing with IPv6 [ 2.182094] NET: Registered protocol family 17 [ 2.182128] Key type dns_resolver registered [ 2.182329] microcode: sig=0x40651, pf=0x40, revision=0x20 [ 2.182459] microcode: Microcode Update Driver: v2.2. [ 2.182999] Btrfs loaded, crc32c=crc32c-generic [ 2.183165] console [netcon0] enabled [ 2.183166] netconsole: network logging started [ 2.183221] rtc_cmos 00:02: setting system clock to 2018-03-24 11:50:19 UTC (1521892219) [ 2.183292] ALSA device list: [ 2.183293] No soundcards found. [ 2.185003] Freeing unused kernel memory: 3468K [ 2.185005] Write protecting the kernel read-only data: 40960k [ 2.186070] Freeing unused kernel memory: 1484K [ 2.188997] Freeing unused kernel memory: 1332K [ 2.189715] input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input3 [ 2.189970] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-2:1 [ 2.569735] logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected. [ 2.657199] clocksource: Switched to clocksource tsc [ 2.749051] usb 3-4: new SuperSpeed USB device number 2 using xhci_hcd [ 2.763903] usb-storage 3-4:1.0: USB Mass Storage device detected [ 2.764086] scsi host4: usb-storage 3-4:1.0 [ 3.810223] scsi 4:0:0:0: Direct-Access SanDisk SanDisk Ultra PMAP PQ: 0 ANSI: 6 [ 3.810802] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.811018] sd 4:0:0:0: [sdb] 30965760 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 3.811831] sd 4:0:0:0: [sdb] Write Protect is off [ 3.811832] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 00 08 [ 3.812641] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.102835] sdb: sdb1 sdb2 [ 4.105407] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.505543] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities [ 4.506011] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities [ 16.035639] EXT4-fs (sdb2): recovery complete [ 16.039634] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 19.788577] ### BIG FAT WARNING [ 19.788587] ### sdb2 is removable. suspend/resume may not work [ 19.789609] ### BIG FAT WARNING [ 19.789620] ### sdb1 is removable. suspend/resume may not work [ 19.865314] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 19.865459] systemd[1]: Detected architecture x86-64. [ 19.865618] systemd[1]: Set hostname to . [ 19.888385] systemd[1]: Listening on Journal Socket. [ 19.888448] systemd[1]: Listening on Journal Socket (/dev/log). [ 19.888457] systemd[1]: Reached target Swap. [ 19.888488] systemd[1]: Listening on udev Control Socket. [ 19.888830] systemd[1]: Created slice User and Session Slice. [ 19.898244] systemd[1]: Listening on RPCbind Server Activation Socket. [ 19.898303] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 19.907146] applespi: loading out-of-tree module taints kernel. [ 19.970576] systemd-journald[271]: Received request to flush runtime journal from PID 1 [ 20.395218] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81f3ba00) [ 20.498203] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 20.514996] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 20.524165] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 20.526184] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 20.526186] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.526188] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.526190] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.526191] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.526193] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 20.526195] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 20.530763] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 20.543720] nuvoton-cir 00:05: [io 0x0240-0x024f] [ 20.543884] nuvoton-cir 00:05: [irq 3] [ 20.543890] nuvoton-cir 00:05: [io 0x0250-0x025f] [ 20.544381] nuvoton-cir 00:05: activated [ 20.544408] nuvoton-cir 00:05: found NCT6776F or compatible: chip id: 0xc3 0x33 [ 20.546184] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:05/rc/rc0 [ 20.561253] lirc_dev: IR Remote Control driver registered, major 243 [ 20.567394] rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 20.567397] IR LIRC bridge handler initialized [ 20.576400] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 20.587375] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 20.587803] Registered IR keymap rc-rc6-mce [ 20.597127] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 20.603252] IR RC6 protocol handler initialized [ 20.628256] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:05/rc/rc0/input9 [ 20.630343] nuvoton-cir 00:05: driver has been successfully loaded [ 20.717682] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.759511] Bluetooth: Core ver 2.22 [ 20.759594] NET: Registered protocol family 31 [ 20.759596] Bluetooth: HCI device and connection manager initialized [ 20.759602] Bluetooth: HCI socket layer initialized [ 20.759606] Bluetooth: L2CAP socket layer initialized [ 20.759621] Bluetooth: SCO socket layer initialized [ 20.780174] usbcore: registered new interface driver btusb [ 20.820231] intel_rapl: Found RAPL domain package [ 20.820233] intel_rapl: Found RAPL domain core [ 20.820234] intel_rapl: Found RAPL domain uncore [ 20.820235] intel_rapl: Found RAPL domain dram [ 21.113605] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 21.149233] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 21.185111] EXT4-fs (sda2): recovery complete [ 21.188219] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 21.244839] retroarch[395]: segfault at 3 ip 000000000050961f sp 00007fcbe9dfc960 error 4 in retroarch[400000+2cc000] [ 23.612143] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.612173] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.614482] 8021q: 802.1Q VLAN Support v1.8 [ 24.643603] retroarch[670]: segfault at 3 ip 000000000050961f sp 00007f16d5e16960 error 4 in retroarch[400000+2cc000] [ 26.897786] retroarch[677]: segfault at 3 ip 000000000050961f sp 00007fcab0329960 error 4 in retroarch[400000+2cc000] [ 29.395708] retroarch[685]: segfault at 3 ip 000000000050961f sp 00007f8f38329960 error 4 in retroarch[400000+2cc000] [ 32.147962] retroarch[692]: segfault at 3 ip 000000000050961f sp 00007f7402485960 error 4 in retroarch[400000+2cc000] [ 34.898410] retroarch[699]: segfault at 3 ip 000000000050961f sp 00007f26902a3960 error 4 in retroarch[400000+2cc000] [ 51.149715] retroarch[709]: segfault at 3 ip 000000000050961f sp 00007f2dc7b6d960 error 4 in retroarch[400000+2cc000] [ 62.399006] retroarch[719]: segfault at 3 ip 000000000050961f sp 00007f0086960960 error 4 in retroarch[400000+2cc000] [ 66.147339] retroarch[726]: segfault at 3 ip 000000000050961f sp 00007f45d8ef0960 error 4 in retroarch[400000+2cc000] [ 103.283892] retroarch[732]: segfault at 3 ip 000000000050961f sp 00007fea8d57e960 error 4 in retroarch[400000+2cc000] Lakka:~ #

jdca commented 6 years ago

Lakka:~ # lspci 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09) 00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04) 00:16.0 Communication controller: Intel Corporation 8 Series HECI (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-V (rev 04) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI (rev 04) 00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04) Lakka:~ #

gouchi commented 6 years ago

Thank you but graphic log should be

lspci -nnk | grep -A3 VGA

jdca commented 6 years ago

Lakka:~ # lspci -nnk | grep -A3 VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a26] (rev 09) Subsystem: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:2054] Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09)

gouchi commented 6 years ago

You graphic is supported but in your log you got ? [INFO] [GL]: Found GL context: �H����������

It is workign with Lakka 2.1 ?

Thank you.

gouchi commented 6 years ago

I reproduce the issue with an Intel HD 5500 with Lakka-Generic.x86_64-2.1-devel-20180322000706-r28164-gc90e96b2e.

[INFO] [GL]: Found GL context: �H����������

jdca commented 6 years ago

Everything works with

Lakka-Generic.x86_64-2.1-devel-20180304204340-r28154-gb552a9a26.img.gz

but not with

Lakka-Generic.x86_64-2.1-devel-canary-d4d40fd.img

and

Lakka-Generic.x86_64-2.1-devel-20180322000706-r28164-gc90e96b2e.img

gouchi commented 6 years ago

Similar issue on RA issue tracker.

markwkidd commented 6 years ago

This seems like the segmentation fault I'm getting with the March 22 build on my Asus eeePC 900A: https://gist.github.com/markwkidd/b97f63402e6a00a68094b7873e5b4267

autofire372 commented 6 years ago

Bug has been fixed in RetroArch master.

Could a RetroArch update please happen? This bug is a complete showstopper for Lakka.