search

libretro / Lakka-LibreELEC

Lakka is a lightweight Linux distribution that transforms a small computer into a full blown game console.
https://www.lakka.tv
1.74k stars 287 forks source link

No HDMI audio on Radeon RX 580 #631

Closed TMueller83 closed 5 years ago

TMueller83 commented 5 years ago

On Lakka 2.2.2-generic.x86_64 audio output via HDMI is not working with my Radeon RX 580 graphics card. I have tried all possible HDMI devices (0-5) without success. I also tried the nightly build from 2019-04-02 again without success.

I have tried to play sound on the HDMI devices directly using aplay but there was no sound output on any HDMI device.

I assume the problem is related to the drivers provided with the Linux kernel 4.11. I can confirm, that using Ubuntu 16.04 with kernel 4.15.0-47-generic the HDMI audio output works flawlessly on the RX 580.

gouchi commented 5 years ago

Can you try this testing image based on LE 9 ?

Thank you.

TMueller83 commented 5 years ago

Thank you very much for the testing image. Sadly, the HDMI audio output does not work with this image as well. I have also tried to use aplay to output sound via HDMI without success. Audio output only works via card 2 (see output of aplay -l below) and possibly via card 0, which I did not test.

EDIT 1: I was wrong. Using aplay, there is some audio output via HDMI 3 (card 1, device 9) however it plays at a very low volume and the output does not sound like its supposed to sound.

EDIT 2: I have noticed, that using aplay with a 44.1 kHz wave file output on HDMI 3 works flawlessly (the previous test file was 48 kHz).

Below you find the output of aplay -l and aplay -L

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT2020 Analog [VT2020 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: VT2020 Digital [VT2020 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT2020 Alt Analog [VT2020 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: DGX [Xonar DGX], device 0: Multichannel [Multichannel]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: DGX [Xonar DGX], device 1: Digital [Digital]
  Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
    HDA Intel PCH, VT2020 Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, VT2020 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, VT2020 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
    HDA ATI HDMI, HDMI 5
    HDMI Audio Output
default:CARD=DGX
    Xonar DGX, Multichannel
    Default Audio Device
sysdefault:CARD=DGX
    Xonar DGX, Multichannel
    Default Audio Device
front:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    Front speakers
surround21:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    4.0 Surround output to Front and Rear speakers
surround41:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DGX,DEV=0
    Xonar DGX, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
gouchi commented 5 years ago

Thank you for the test.

Is it possible to get the output from

lspci -nnk | grep -A3 VGA

and

dmesg

With the testing image based on LE9.

Thank you.

TMueller83 commented 5 years ago

Sorry for the delayed answer. Here comes the requested output:

lspci -nnk | grep -A3 VGA
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] [1002:67df] (rev e7)
    Subsystem: Sapphire Technology Limited Ellesmere [Radeon RX 470/480/570/570X/580/580X] (Nitro+ Radeon RX 580 4GB) [1da2:e366]
    Kernel driver in use: amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580] [1002:aaf0]
dmesg
[    0.019999] tsc: PIT calibration matches HPET. 1 loops
[    0.019999] tsc: Detected 3503.453 MHz processor
[    0.000007] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32800eaf1c4, max_idle_ns: 440795250577 ns
[    0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 7009.86 BogoMIPS (lpj=11678176)
[    0.000016] pid_max: default: 32768 minimum: 301
[    0.002575] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.003632] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003671] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.003703] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.003841] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003841] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003844] process: using mwait in idle threads
[    0.003846] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.003846] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.003848] Spectre V2 : Mitigation: Full generic retpoline
[    0.003848] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.003849] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.003855] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.003856] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.003857] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.004017] Freeing SMP alternatives memory: 52K
[    0.013093] TSC deadline timer enabled
[    0.013095] smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.013155] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.013172] ... version:                3
[    0.013172] ... bit width:              48
[    0.013172] ... generic registers:      4
[    0.013173] ... value mask:             0000ffffffffffff
[    0.013173] ... max period:             00007fffffffffff
[    0.013174] ... fixed-purpose events:   3
[    0.013174] ... event mask:             000000070000000f
[    0.013200] rcu: Hierarchical SRCU implementation.
[    0.013341] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.013341] smp: Bringing up secondary CPUs ...
[    0.013341] x86: Booting SMP configuration:
[    0.013341] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.025690] smp: Brought up 1 node, 8 CPUs
[    0.025690] smpboot: Max logical packages: 1
[    0.025690] smpboot: Total of 8 processors activated (56077.88 BogoMIPS)
[    0.026860] devtmpfs: initialized
[    0.026860] PM: Registering ACPI NVS region [mem 0xde15d000-0xde1fbfff] (651264 bytes)
[    0.026860] PM: Registering ACPI NVS region [mem 0xdea29000-0xdea6bfff] (274432 bytes)
[    0.026860] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.026860] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.026860] xor: automatically using best checksumming function   avx       
[    0.026860] pinctrl core: initialized pinctrl subsystem
[    0.026951] NET: Registered protocol family 16
[    0.027098] cpuidle: using governor ladder
[    0.027101] cpuidle: using governor menu
[    0.027170] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.027171] ACPI: bus type PCI registered
[    0.027212] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.027214] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.027219] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.027276] PCI: Using configuration type 1 for base access
[    0.027343] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.086676] raid6: sse2x1   gen() 10721 MB/s
[    0.143343] raid6: sse2x1   xor()  7703 MB/s
[    0.200009] raid6: sse2x2   gen() 12751 MB/s
[    0.256678] raid6: sse2x2   xor()  8554 MB/s
[    0.313344] raid6: sse2x4   gen() 15205 MB/s
[    0.370012] raid6: sse2x4   xor() 10454 MB/s
[    0.370012] raid6: using algorithm sse2x4 gen() 15205 MB/s
[    0.370013] raid6: .... xor() 10454 MB/s, rmw enabled
[    0.370014] raid6: using ssse3x2 recovery algorithm
[    0.370052] ACPI: Added _OSI(Module Device)
[    0.370053] ACPI: Added _OSI(Processor Device)
[    0.370053] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.370054] ACPI: Added _OSI(Processor Aggregator Device)
[    0.370055] ACPI: Added _OSI(Linux-Dell-Video)
[    0.370056] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.374245] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.376492] ACPI: Dynamic OEM Table Load:
[    0.376497] ACPI: SSDT 0xFFFF964ECC5EF000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.376771] ACPI: Dynamic OEM Table Load:
[    0.376774] ACPI: SSDT 0xFFFF964ECC05AC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.376945] ACPI: Dynamic OEM Table Load:
[    0.376948] ACPI: SSDT 0xFFFF964ECC04F000 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.378128] ACPI: Interpreter enabled
[    0.378140] ACPI: (supports S0 S3 S5)
[    0.378140] ACPI: Using IOAPIC for interrupt routing
[    0.378158] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.378391] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.383575] ACPI: Power Resource [FN00] (off)
[    0.383631] ACPI: Power Resource [FN01] (off)
[    0.383682] ACPI: Power Resource [FN02] (off)
[    0.383733] ACPI: Power Resource [FN03] (off)
[    0.383783] ACPI: Power Resource [FN04] (off)
[    0.384206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.384209] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.384368] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    0.384463] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.384464] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.384657] PCI host bridge to bus 0000:00
[    0.384659] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.384660] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.384661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.384662] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.384663] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.384664] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.384665] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.384667] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.384668] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.384674] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.384748] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.384775] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.384856] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.384879] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.384943] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.385009] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.385031] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
[    0.385099] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.385170] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.385190] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[    0.385268] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.385335] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.385353] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.385413] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.385475] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.385552] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.385625] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.385703] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.385773] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.385850] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.385920] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[    0.385997] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.386067] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.386145] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.386215] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.386235] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[    0.386313] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.386381] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.386539] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.386555] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.386562] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.386568] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.386574] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.386581] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.386587] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[    0.386623] pci 0000:00:1f.2: PME# supported from D3hot
[    0.386686] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.386703] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[    0.386721] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.386812] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
[    0.386827] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.386834] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.386839] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.386843] pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
[    0.386848] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[    0.386851] pci 0000:01:00.0: enabling Extended Tags
[    0.386858] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.386887] pci 0000:01:00.0: supports D1 D2
[    0.386888] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.386926] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
[    0.386938] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[    0.386954] pci 0000:01:00.1: enabling Extended Tags
[    0.386981] pci 0000:01:00.1: supports D1 D2
[    0.387029] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.387030] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.387032] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.387034] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.387086] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400
[    0.387260] pci 0000:02:00.0: supports D1 D2
[    0.387261] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.387326] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.387329] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.387393] pci_bus 0000:03: extended config space not accessible
[    0.387423] pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100
[    0.387448] pci 0000:03:04.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.387574] pci 0000:03:04.0: supports D1 D2
[    0.387663] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.387671] pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
[    0.387740] pci 0000:04:00.0: [1106:3432] type 00 class 0x0c0330
[    0.387766] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d00fff]
[    0.387898] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.387967] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.387972] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.388025] pci 0000:05:00.0: [8086:244e] type 01 class 0x060401
[    0.388191] pci 0000:05:00.0: supports D1 D2
[    0.388192] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388241] pci 0000:00:1c.5: PCI bridge to [bus 05-06] (subtractive decode)
[    0.388250] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.388251] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.388252] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.388253] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.388254] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.388255] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.388256] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.388257] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.388304] pci_bus 0000:06: extended config space not accessible
[    0.388394] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
[    0.388419] pci 0000:05:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.388420] pci 0000:05:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.388421] pci 0000:05:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.388422] pci 0000:05:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.388423] pci 0000:05:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.388424] pci 0000:05:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.388425] pci 0000:05:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.388426] pci 0000:05:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.388488] pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
[    0.388528] pci 0000:07:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
[    0.388541] pci 0000:07:00.0: reg 0x18: [io  0xc000-0xc07f]
[    0.388680] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388758] pci 0000:00:1c.6: PCI bridge to [bus 07]
[    0.388761] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.388764] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.388815] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
[    0.388841] pci 0000:08:00.0: reg 0x10: [io  0xb040-0xb047]
[    0.388853] pci 0000:08:00.0: reg 0x14: [io  0xb030-0xb033]
[    0.388864] pci 0000:08:00.0: reg 0x18: [io  0xb020-0xb027]
[    0.388876] pci 0000:08:00.0: reg 0x1c: [io  0xb010-0xb013]
[    0.388887] pci 0000:08:00.0: reg 0x20: [io  0xb000-0xb00f]
[    0.388898] pci 0000:08:00.0: reg 0x24: [mem 0xf7b10000-0xf7b101ff]
[    0.388910] pci 0000:08:00.0: reg 0x30: [mem 0xf7b00000-0xf7b0ffff pref]
[    0.388931] pci 0000:08:00.0: Enabling fixed DMA alias to 00.1
[    0.388981] pci 0000:08:00.0: PME# supported from D3hot
[    0.389045] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.389048] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.389051] pci 0000:00:1c.7:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.389454] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.389493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.389530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.389566] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.389603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.389641] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.389678] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.389715] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.389904] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.389904] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.389904] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.389904] vgaarb: loaded
[    0.389904] SCSI subsystem initialized
[    0.389904] libata version 3.00 loaded.
[    0.389904] ACPI: bus type USB registered
[    0.389904] usbcore: registered new interface driver usbfs
[    0.389904] usbcore: registered new interface driver hub
[    0.390024] usbcore: registered new device driver usb
[    0.390042] pps_core: LinuxPPS API ver. 1 registered
[    0.390043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.390044] PTP clock support registered
[    0.390064] Registered efivars operations
[    0.420326] Advanced Linux Sound Architecture Driver Initialized.
[    0.420326] PCI: Using ACPI for IRQ routing
[    0.421350] PCI: pci_cache_line_size set to 64 bytes
[    0.421408] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.421409] e820: reserve RAM buffer [mem 0xcb87c018-0xcbffffff]
[    0.421410] e820: reserve RAM buffer [mem 0xcb88d018-0xcbffffff]
[    0.421410] e820: reserve RAM buffer [mem 0xdddf1000-0xdfffffff]
[    0.421412] e820: reserve RAM buffer [mem 0xde15d000-0xdfffffff]
[    0.421413] e820: reserve RAM buffer [mem 0xdea29000-0xdfffffff]
[    0.421414] e820: reserve RAM buffer [mem 0xdf465000-0xdfffffff]
[    0.421414] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.421415] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.423518] clocksource: Switched to clocksource tsc-early
[    0.433072] FS-Cache: Loaded
[    0.433088] pnp: PnP ACPI init
[    0.433152] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.433156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.433214] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.433215] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.433216] system 00:01: [io  0xffff] has been reserved
[    0.433217] system 00:01: [io  0xffff] has been reserved
[    0.433219] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.433220] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.433221] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.433224] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.433239] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.433275] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.433278] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.433373] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.433374] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.433376] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.433379] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.433557] pnp 00:05: [dma 0 disabled]
[    0.433590] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.433628] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.433631] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.433796] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.433797] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.433798] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.433799] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.433801] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.433802] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.433803] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.433804] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.433806] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.433807] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.433808] system 00:07: [mem 0xf0200000-0xf0200fff] has been reserved
[    0.433811] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.433902] pnp: PnP ACPI: found 8 devices
[    0.439210] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.439279] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.439280] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.439282] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.439284] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.439287] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.439289] pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
[    0.439308] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.439310] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.439319] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.439323] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.439330] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.439352] pci 0000:00:1c.5: PCI bridge to [bus 05-06]
[    0.439362] pci 0000:00:1c.6: PCI bridge to [bus 07]
[    0.439364] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.439368] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.439374] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.439376] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.439380] pci 0000:00:1c.7:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.439388] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.439389] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.439390] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439391] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.439392] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.439393] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.439394] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.439395] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.439396] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.439397] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.439398] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.439400] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.439401] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.439402] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.439403] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.439404] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.439405] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439406] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.439407] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.439408] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.439409] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.439410] pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.439411] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.439412] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.439413] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439414] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.439416] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.439417] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.439418] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.439419] pci_bus 0000:06: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.439420] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    0.439421] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.439422] pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
[    0.439423] pci_bus 0000:08: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.439492] NET: Registered protocol family 2
[    0.439565] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.439603] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.439740] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.439846] TCP: Hash tables configured (established 131072 bind 65536)
[    0.439870] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.439903] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.439955] NET: Registered protocol family 1
[    0.440026] RPC: Registered named UNIX socket transport module.
[    0.440027] RPC: Registered udp transport module.
[    0.440027] RPC: Registered tcp transport module.
[    0.440028] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.460142] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c5 took 19482 usecs
[    0.480123] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c5 took 19495 usecs
[    0.480135] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.480140] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.480146] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.480287] pci 0000:07:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.507523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.507526] software IO TLB: mapped [mem 0xcbfac000-0xcffac000] (64MB)
[    0.507634] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.507635] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.507635] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.507636] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.508093] Scanning for low memory corruption every 60 seconds
[    0.508430] Initialise system trusted keyrings
[    0.508457] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.509468] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.509490] FS-Cache: Netfs 'nfs' registered for caching
[    0.509563] NFS: Registering the id_resolver key type
[    0.509566] Key type id_resolver registered
[    0.509567] Key type id_legacy registered
[    0.509569] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.509622] FS-Cache: Netfs 'cifs' registered for caching
[    0.736616] Key type asymmetric registered
[    0.736618] Asymmetric key parser 'x509' registered
[    0.736624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.736626] io scheduler noop registered
[    0.736645] io scheduler cfq registered (default)
[    0.736645] io scheduler mq-deadline registered
[    0.736646] io scheduler kyber registered
[    0.736669] io scheduler bfq registered
[    0.737164] efifb: probing for efifb
[    0.737175] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.737175] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.737176] efifb: scrolling: redraw
[    0.737177] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.738389] Console: switching to colour frame buffer device 128x48
[    0.739542] fb0: EFI VGA frame buffer device
[    0.739548] intel_idle: MWAIT substates: 0x1120
[    0.739549] intel_idle: v0.4.1 model 0x3A
[    0.739720] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.739771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.739796] ACPI: Power Button [PWRB]
[    0.739828] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.739851] ACPI: Power Button [PWRF]
[    0.740605] thermal LNXTHERM:00: registered as thermal_zone0
[    0.740606] ACPI: Thermal Zone [TZ00] (28 C)
[    0.740772] thermal LNXTHERM:01: registered as thermal_zone1
[    0.740773] ACPI: Thermal Zone [TZ01] (30 C)
[    0.740861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.761423] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.762014] Linux agpgart interface v0.103
[    0.762043] [drm] radeon kernel modesetting enabled.
[    0.762092] [drm] amdgpu kernel modesetting enabled.
[    0.762265] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    0.762266] fb: switching to amdgpudrmfb from EFI VGA
[    0.762276] Console: switching to colour dummy device 80x25
[    0.762562] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE7).
[    0.762567] [drm] register mmio base: 0xF7E00000
[    0.762568] [drm] register mmio size: 262144
[    0.762573] [drm] add ip block number 0 <vi_common>
[    0.762574] [drm] add ip block number 1 <gmc_v8_0>
[    0.762575] [drm] add ip block number 2 <tonga_ih>
[    0.762575] [drm] add ip block number 3 <powerplay>
[    0.762576] [drm] add ip block number 4 <dm>
[    0.762577] [drm] add ip block number 5 <gfx_v8_0>
[    0.762577] [drm] add ip block number 6 <sdma_v3_0>
[    0.762578] [drm] add ip block number 7 <uvd_v6_0>
[    0.762579] [drm] add ip block number 8 <vce_v3_0>
[    0.762584] [drm] UVD is enabled in VM mode
[    0.762584] [drm] UVD ENC is enabled in VM mode
[    0.762585] [drm] VCE enabled in VM mode
[    0.762757] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    0.762761] caller pci_map_rom+0x71/0x1c0 mapping multiple BARs
[    0.762762] amdgpu 0000:01:00.0: No more image in the PCI ROM
[    0.762792] ATOM BIOS: 113-1E3660U-O51
[    0.762811] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    0.762819] amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
[    0.762821] amdgpu 0000:01:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[    0.762824] [drm] Detected VRAM RAM=8192M, BAR=256M
[    0.762825] [drm] RAM width 256bits GDDR5
[    0.762852] [TTM] Zone  kernel: Available graphics memory: 8169444 kiB
[    0.762853] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    0.762853] [TTM] Initializing pool allocator
[    0.762856] [TTM] Initializing DMA pool allocator
[    0.763101] [drm] amdgpu: 8192M of VRAM memory ready
[    0.763102] [drm] amdgpu: 8192M of GTT memory ready.
[    0.763108] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    0.763497] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[    0.763551] [drm] Chained IB support enabled!
[    0.764406] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    0.764941] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    0.817361] amdgpu: [powerplay] Failed to retrieve minimum clocks.
[    0.817361] amdgpu: [powerplay] Error in phm_get_clock_info 
[    0.817398] [drm] DM_PPLIB: values for Engine clock
[    0.817399] [drm] DM_PPLIB:   300000
[    0.817399] [drm] DM_PPLIB:   600000
[    0.817400] [drm] DM_PPLIB:   900000
[    0.817400] [drm] DM_PPLIB:   1145000
[    0.817400] [drm] DM_PPLIB:   1215000
[    0.817401] [drm] DM_PPLIB:   1257000
[    0.817401] [drm] DM_PPLIB:   1300000
[    0.817401] [drm] DM_PPLIB:   1411000
[    0.817402] [drm] DM_PPLIB: Validation clocks:
[    0.817403] [drm] DM_PPLIB:    engine_max_clock: 141100
[    0.817403] [drm] DM_PPLIB:    memory_max_clock: 200000
[    0.817403] [drm] DM_PPLIB:    level           : 8
[    0.817404] [drm] DM_PPLIB: values for Memory clock
[    0.817405] [drm] DM_PPLIB:   300000
[    0.817405] [drm] DM_PPLIB:   1000000
[    0.817405] [drm] DM_PPLIB:   2000000
[    0.817406] [drm] DM_PPLIB: Validation clocks:
[    0.817406] [drm] DM_PPLIB:    engine_max_clock: 141100
[    0.817407] [drm] DM_PPLIB:    memory_max_clock: 200000
[    0.817407] [drm] DM_PPLIB:    level           : 8
[    0.850095] [drm] Display Core initialized with v3.1.59!
[    0.887881] [drm] SADs count is: -2, don't need to read it
[    0.887887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.887888] [drm] Driver supports precise vblank timestamp query.
[    0.938962] [drm] UVD and UVD ENC initialized successfully.
[    1.049935] [drm] VCE initialized successfully.
[    1.051979] [drm] fb mappable at 0xE0828000
[    1.051980] [drm] vram apper at 0xE0000000
[    1.051980] [drm] size 8294400
[    1.051981] [drm] fb depth is 24
[    1.051981] [drm]    pitch is 7680
[    1.052045] fbcon: amdgpudrmfb (fb0) is primary device
[    1.134774] Console: switching to colour frame buffer device 240x67
[    1.151339] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    1.152009] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:01:00.0 on minor 0
[    1.153543] brd: module loaded
[    1.153557] loop: module loaded
[    1.155422] usbcore: registered new interface driver rtsx_usb
[    1.155451] Loading iSCSI transport class v2.0-870.
[    1.155529] iscsi: registered transport (tcp)
[    1.155530] megasas: 07.706.03.00-rc1
[    1.155690] ahci 0000:00:1f.2: version 3.0
[    1.165946] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[    1.165952] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.183944] scsi host0: ahci
[    1.184278] scsi host1: ahci
[    1.184529] scsi host2: ahci
[    1.184708] scsi host3: ahci
[    1.184813] scsi host4: ahci
[    1.184862] scsi host5: ahci
[    1.184881] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 25
[    1.184882] ata2: DUMMY
[    1.184884] ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 25
[    1.184885] ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 25
[    1.184886] ata5: DUMMY
[    1.184886] ata6: DUMMY
[    1.185031] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.185033] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.185187] scsi host6: ahci
[    1.185231] scsi host7: ahci
[    1.185250] ata7: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10100 irq 26
[    1.185252] ata8: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10180 irq 26
[    1.185474] tun: Universal TUN/TAP device driver, 1.6
[    1.185510] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[    1.185522] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    1.185523] Copyright (c) 2007 Atheros Corporation.
[    1.217946] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[    1.217979] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    1.218147] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[    1.218160] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.218160] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.218170] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.218170] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.218180] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.218180] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.218191] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.218192] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.218200] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[    1.218201] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    1.218341] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    1.218342] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    1.218351] ice: Intel(R) Ethernet Connection E800 Series Linux Driver - version ice-0.7.0-k
[    1.218352] ice: Copyright (c) 2018, Intel Corporation.
[    1.218427] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    1.218441] sky2: driver version 1.30
[    1.218515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.218516] ehci-pci: EHCI PCI platform driver
[    1.218605] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.218610] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.218622] ehci-pci 0000:00:1a.0: debug port 2
[    1.222527] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.222534] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
[    1.233395] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.233631] hub 1-0:1.0: USB hub found
[    1.233637] hub 1-0:1.0: 2 ports detected
[    1.233807] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.233811] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.233820] ehci-pci 0000:00:1d.0: debug port 2
[    1.237725] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.237733] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
[    1.250065] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.250232] hub 2-0:1.0: USB hub found
[    1.250237] hub 2-0:1.0: 2 ports detected
[    1.250331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.250333] ohci-pci: OHCI PCI platform driver
[    1.250341] uhci_hcd: USB Universal Host Controller Interface driver
[    1.250426] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.250430] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.251482] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    1.251486] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.251723] hub 3-0:1.0: USB hub found
[    1.251732] hub 3-0:1.0: 4 ports detected
[    1.251958] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.251961] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.251963] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.252125] hub 4-0:1.0: USB hub found
[    1.252133] hub 4-0:1.0: 4 ports detected
[    1.252408] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.252411] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[    1.252494] xhci_hcd 0000:04:00.0: hcc params 0x002810eb hci version 0x96 quirks 0x0000000000080080
[    1.252779] hub 5-0:1.0: USB hub found
[    1.252786] hub 5-0:1.0: 1 port detected
[    1.252849] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.252852] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[    1.252854] xhci_hcd 0000:04:00.0: Host supports USB 3.0  SuperSpeed
[    1.252876] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.252996] hub 6-0:1.0: USB hub found
[    1.253007] hub 6-0:1.0: 4 ports detected
[    1.253106] usbcore: registered new interface driver uas
[    1.253125] usbcore: registered new interface driver usb-storage
[    1.253142] i8042: PNP: No PS/2 controller found.
[    1.253142] i8042: Probing ports directly.
[    1.253574] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.253577] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.253653] mousedev: PS/2 mouse device common for all mice
[    1.253912] rtc_cmos 00:02: RTC can wake from S4
[    1.254060] rtc_cmos 00:02: registered as rtc0
[    1.254070] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.254078] i2c /dev entries driver
[    1.254349] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    1.254443] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.255091] intel_pstate: Intel P-state driver initializing
[    1.255308] sdhci: Secure Digital Host Controller Interface driver
[    1.255309] sdhci: Copyright(c) Pierre Ossman
[    1.255369] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.255371] No iBFT detected.
[    1.255373] EFI Variables Facility v0.08 2004-May-17
[    1.292318] hidraw: raw HID events driver (C) Jiri Kosina
[    1.292482] usbcore: registered new interface driver usbhid
[    1.292482] usbhid: USB HID core driver
[    1.292730] NET: Registered protocol family 10
[    1.292868] Segment Routing with IPv6
[    1.292878] NET: Registered protocol family 17
[    1.292888] Key type dns_resolver registered
[    1.292966] microcode: sig=0x306a9, pf=0x2, revision=0x20
[    1.293075] microcode: Microcode Update Driver: v2.2.
[    1.293106] sched_clock: Marking stable (1313060715, -19991750)->(1307374821, -14305856)
[    1.293331] Loading compiled-in X.509 certificates
[    1.293467] Btrfs loaded, crc32c=crc32c-generic
[    1.293722] console [netcon0] enabled
[    1.293723] netconsole: network logging started
[    1.293751] rtc_cmos 00:02: setting system clock to 2019-04-09 19:59:11 UTC (1554839951)
[    1.293785] ALSA device list:
[    1.293786]   No soundcards found.
[    1.496894] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.496898] ata8: SATA link down (SStatus 0 SControl 300)
[    1.496935] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.496940] ata7: SATA link down (SStatus 0 SControl 300)
[    1.496961] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.497467] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.497540] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.497767] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.497770] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.498003] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.498075] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.498143] ata4.00: ATAPI: TSSTcorp DVDWBD SH-B123L, SB04, max UDMA/100
[    1.498194] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.498265] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.498464] ata1.00: configured for UDMA/133
[    1.498699] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  3B1Q PQ: 0 ANSI: 5
[    1.499051] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.499441] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.499496] sd 0:0:0:0: [sda] Write Protect is off
[    1.499500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.499550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.499692] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.499762] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.499831] ata4.00: configured for UDMA/100
[    1.500471]  sda: sda1 sda2 sda3
[    1.500965] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.502893] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.502923] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.503291] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    1.503293] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.509404] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
[    1.509466] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20180810/psparse-516)
[    1.510432] ata3.00: configured for UDMA/133
[    1.510753] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5
[    1.511222] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.511495] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.511498] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.511565] sd 2:0:0:0: [sdb] Write Protect is off
[    1.511569] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.511634] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.512070] scsi 3:0:0:0: CD-ROM            TSSTcorp DVDWBD SH-B123L  SB04 PQ: 0 ANSI: 5
[    1.526742] tsc: Refined TSC clocksource calibration: 3503.445 MHz
[    1.526752] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32800736690, max_idle_ns: 440795289710 ns
[    1.526799] clocksource: Switched to clocksource tsc
[    1.563394] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.580063] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.580077] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.595764] sr 3:0:0:0: [sr0] scsi3-mmc drive: 8x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.595767] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.595965] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.596067] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    1.710795] hub 1-1:1.0: USB hub found
[    1.711033] hub 1-1:1.0: 6 ports detected
[    1.722197] hub 5-1:1.0: USB hub found
[    1.722313] hub 5-1:1.0: 4 ports detected
[    1.727398] hub 2-1:1.0: USB hub found
[    1.727491] hub 2-1:1.0: 8 ports detected
[    1.990063] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[    1.996405]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    1.997208] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.999257] Freeing unused kernel image memory: 4800K
[    2.006738] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[    2.030061] Write protecting the kernel read-only data: 59392k
[    2.031073] Freeing unused kernel image memory: 2004K
[    2.031307] Freeing unused kernel image memory: 548K
[    2.031381] Run /init as init process
[    2.151139] random: fast init done
[    2.170064] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.185584] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[    2.185800] scsi host8: usb-storage 2-1.8:1.0
[    2.280303] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input2
[    2.405069] input: Logitech K520 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/0003:046D:2011.0004/input/input5
[    2.405365] logitech-hidpp-device 0003:046D:2011.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:1a.0-1.6:2
[    2.410952] input: Logitech M325 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/0003:046D:400A.0005/input/input6
[    2.411264] logitech-hidpp-device 0003:046D:400A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:1a.0-1.6:3
[    3.208671] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[    3.209060] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    3.210206] sd 8:0:0:0: [sdc] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[    3.210835] sd 8:0:0:0: [sdc] Write Protect is off
[    3.210838] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
[    3.211455] sd 8:0:0:0: [sdc] No Caching mode page found
[    3.211457] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[    3.920826] Alternate GPT is invalid, using primary GPT.
[    3.920842]  sdc: sdc1 sdc2
[    3.923327] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    6.466671] random: crng init done
[   17.770559] ### BIG FAT WARNING
[   17.770580] ### sdc1 is removable. suspend/resume may not work
[   17.821063] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[   17.837251] systemd[1]: Detected architecture x86-64.
[   17.837352] systemd[1]: Running with unpopulated /etc.
[   17.839591] systemd[1]: Set hostname to <Lakka>.
[   17.839617] systemd[1]: Cannot open /etc/machine-id: No such file or directory
[   17.881725] systemd[1]: Populated /etc with preset unit settings.
[   17.892127] systemd[1]: Reached target Swap.
[   17.897132] systemd[1]: Created slice User and Session Slice.
[   17.897143] systemd[1]: Reached target Slices.
[   17.897298] systemd[1]: Listening on udev Control Socket.
[   17.922018] kernel-overlays-setup: setup base modules
[   17.938622] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.12
[   17.945685] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[   17.945719] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[   17.945759] kernel-overlays-setup: done
[   18.001447] systemd-journald[281]: Received request to flush runtime journal from PID 1
[   18.190511] usbcore: registered new interface driver xpad
[   18.193017] snd_oxygen 0000:03:04.0: enabling device (0100 -> 0101)
[   18.196432] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   18.198914] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   18.198977] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   18.198979] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[   18.207779] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[   18.207831] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
[   18.207877] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[   18.207936] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
[   18.207982] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
[   18.208030] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
[   18.212738] snd_hda_codec_via hdaudioC1D2: autoconfig for VT2020: line_outs=3 (0x24/0x25/0x26/0x0/0x0) type:line
[   18.212741] snd_hda_codec_via hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.212743] snd_hda_codec_via hdaudioC1D2:    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[   18.212744] snd_hda_codec_via hdaudioC1D2:    mono: mono_out=0x0
[   18.212746] snd_hda_codec_via hdaudioC1D2:    dig-out=0x2d/0x2e
[   18.212747] snd_hda_codec_via hdaudioC1D2:    inputs:
[   18.212749] snd_hda_codec_via hdaudioC1D2:      Front Mic=0x29
[   18.212751] snd_hda_codec_via hdaudioC1D2:      Rear Mic=0x2b
[   18.212752] snd_hda_codec_via hdaudioC1D2:      Line=0x2a
[   18.220555] intel_rapl: Found RAPL domain package
[   18.220558] intel_rapl: Found RAPL domain core
[   18.223316] atl1c 0000:07:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[   18.225924] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   18.225984] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   18.226042] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   18.226101] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   18.226156] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   18.226213] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[   18.226263] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[   18.244691] 8021q: 802.1Q VLAN Support v1.8
[   18.328734] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   18.544065] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[   18.651661] fuse init (API version 7.27)
[   18.836621] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[   23.948754] logitech-hidpp-device 0003:046D:2011.0004: HID++ 1.0 device connected.
gouchi commented 5 years ago

Hi,

Thank you for the log. It does not seem to have any issue.

If you did edit the configuration file directly you did stop RA before as mentioned in the documentation ? You did not use the GUI ?

Can you try to use another distro and check if the sound is working correctly with RA but you will have to remove PulseAudio to make the test.

ToKe79 commented 5 years ago

hi, we have new alpha images based on LibreELEC 9. you can test with these. you may also try to change audio_out_rate to 44100 via cmd-line:

# systemctl stop retroarch
# sed -i /storage/.config/retroarch/retroarch.cfg -e "s/^audio_out_rate = \"48000\"$/audio_out_rate = \"44100\"/"
# systemctl start retroarch

or via menu / GUI: Settings -> Audio Settings -> Audio Output Rate (kHz).

ToKe79 commented 5 years ago

we dropped LE9.0 base and moved to LE9.2, so new URL for images is http://nightly.builds.lakka.tv/Lakka-LE9.2/latest/

TMueller83 commented 5 years ago

Thank you very much for the info @ToKe79. I can confirm that the HDMI audio output works fine now on my RX 580 using the LE9.2 image. A big THANKS to the complete Lakka development Team!