Closed pmar146 closed 3 years ago
@pmar146 Hi, in my case, these pins are connected as follows.
LCD Pin | Connected to |
---|---|
8 (GND) | GND |
9, 10 (LED Anode) | 3.3V (from OPi) |
11 (LED Cathode) | NC (to prevent solder bridge) |
12,13,14 (LED Cathode) | GND (through 100 Ohm) |
Hi There, I notice on the LCD, you use pins 8,10 and 13. These are the backlight pins on the LCD. Where do these plug in on the OPI? I was looking at the pinout guide, but can't trace them there. Cheers and thanks