search

linkingvision / rapidvms

rapidvms(open source VMS/NVR Video Management System/ Network Video Recorder) ==> project closed, use https://www.linkingvision.com/rapidvms Community Edition instead
https://www.linkingvision.com/
Other
440 stars 245 forks source link

Live view is not displayed. #82

Closed chomooho closed 7 years ago

chomooho commented 7 years ago

In rapidvms-r2.0.7, /192.168.1.97:80/onvif/device_service is connected and live view is displayed. 27 The followings are captured packets by Wireshark in rapidvms- r2.0.7. live0830r207.zip

In rapidvms-r4.2, /192.168.1.97:80/onvif/device_service is connected and the camera status is changed to green color. 42 But live view is not displayed, and in console messages “Stor Server Config is not init” is printed when RapidClient is run. The followings are captured packets by Wireshark in rapidvms-r4.2. live0830r42.zip Please solve the problems.

xsmart commented 7 years ago

live0830r207.zip use MJPEG in RTSP, but the live0830r42.zip use H264 in RTSP, could you check the stream 1 & stream 2 in the Camera setting page?

chomooho commented 7 years ago

When I check the stream 1 & stream 2 in the Camera setting, 'Auto' is off and streams are set to H.264 with shadowing. I turn 'Auto' on, and set stream 1 and stream 2 to H.264, and press 'Apply' button. Then Live view is displayed. Thank you xsmart.