search

linuxmint / mintupgrade

41 stars 16 forks source link

Upgrade from Chinamon 21.3 to WIlma 22 #89

Open gorillale opened 1 month ago

gorillale commented 1 month ago

Hi i have new installed 21-3 Chinamon with installed UVNC (X11). Now i upgrade to 22. System restart/newstart have over 2 Minutes to come up (each time). After i will be install Google Chrom. That not works missing libglib2.0-0 I try to installit but not found.

I will go back to 21.3 and restore my Laptop. Regards

No answer requiered, only information to you. Thank you.

bitfarago commented 1 month ago

Hi, I also tried to upgrade to Mint 22, but Mintupgrade ran into an infinite loop when installing the 6.8 kernel:

dkms: autoinstall for kernel 6.8.0-39-generic fail dkms autoinstall on 6.8.0-39-generic/x86_64 failed for nvidia(10)

I think, the problem was the nVidia driver (official v545). I had to break the script, switch back to X.org nvidia driver, reboot with the original kernel, and run Mintupgrade again. After the successful upgrade I reinstalled the driver (v535 is the latest offered) and now works fine.

Using Cinnamon, X11.

Bonus: The Matrix chat is not installed.

gorillale commented 1 month ago

The actualisation works, not the problem. But when finished and i will reboot and all other boot will be very very long. The new system comes up and works, but the boot time is ugly. I have NVIDIA on my Laptop, but the Laptop is to OLD to run Min 22 i thinks. Run with Win10 before, acetable boot time and work ok with ONE APP. More Tast on Win10 will be slow. On Mint 21.3 the LT works good with one or more Tasks. Regards

HP DV7-1270ez (mbr no efi)

bitfarago commented 1 month ago

Open the terminal, run dmesg and check it for startup errors, it can help a lot. All entries start with a timestamp, you can see where/when the long delay occurs.

gorillale commented 1 month ago

Hi Thank you for help. Now i have boot from a usb stick. Same thing. Then i boot from usb combatiblity Mode, then boot up after 1 min. Very long, to long. I have make a dmesg output (see atachment).

after shutdown, message comes ..out usb stick and press enter.. i will be do, then on a loop errors displayed endless. "dont read record....xxxxxxxx"

i have evo850 ssd and checked without errors on surface. i think it is a problem with to old bios and sata I think the laptop has become too old and belongs in the trash. Cant find file attachement here, i will be put here...

Regards.

dmesg.out: [ 0.000000] Linux version 6.8.0-38-generic (buildd@lcy02-amd64-049) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #38-Ubuntu SMP PREEMPT_DYNAMIC Fri Jun 7 15:25:01 UTC 2024 (Ubuntu 6.8.0-38.38-generic 6.8.8) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.lz username=mint hostname=mint noapic noacpi nosplash irqpoll nomodeset -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bde6afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bde6b000-0x00000000bdebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdebf000-0x00000000bdf82fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf83000-0x00000000bdfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdfbf000-0x00000000bdfdefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdfdf000-0x00000000bdff5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdff6000-0x00000000bdffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdffe000-0x00000000bdffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.2D 11/29/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.084 MHz processor [ 0.001627] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001633] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001646] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.001657] MTRR map: 7 entries (3 fixed + 4 variable; max 17), built from 7 variable MTRRs [ 0.001660] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002621] last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.016218] RAMDISK: [mem 0x7ba84000-0x7fffffff] [ 0.016912] ACPI: Early table checksum verification disabled [ 0.016918] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP ) [ 0.016925] ACPI: XSDT 0x00000000BDFFE120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.016934] ACPI: FACP 0x00000000BDFF3000 0000F4 (v04 HP VADER 00000001 MSFT 01000013) [ 0.016943] ACPI: DSDT 0x00000000BDFE4000 00A5B2 (v01 HP VADER 00000001 MSFT 01000013) [ 0.016950] ACPI: FACS 0x00000000BDF8C000 000040 [ 0.016954] ACPI: FACS 0x00000000BDF8C000 000040 [ 0.016959] ACPI: DMAR 0x00000000BDFF5000 000098 (v01 ? 00000001 00000000) [ 0.016965] ACPI: SSDT 0x00000000BDFF4000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.016971] ACPI: HPET 0x00000000BDFF2000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.016976] ACPI: APIC 0x00000000BDFF1000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.016982] ACPI: MCFG 0x00000000BDFF0000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.016987] ACPI: ASF! 0x00000000BDFEF000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.016993] ACPI: SLIC 0x00000000BDFE3000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240) [ 0.016999] ACPI: BOOT 0x00000000BDFE2000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017004] ACPI: SSDT 0x00000000BDFE1000 000296 (v01 INTEL SataAhci 00001000 INTL 20051117) [ 0.017009] ACPI: Reserving FACP table memory at [mem 0xbdff3000-0xbdff30f3] [ 0.017011] ACPI: Reserving DSDT table memory at [mem 0xbdfe4000-0xbdfee5b1] [ 0.017013] ACPI: Reserving FACS table memory at [mem 0xbdf8c000-0xbdf8c03f] [ 0.017015] ACPI: Reserving FACS table memory at [mem 0xbdf8c000-0xbdf8c03f] [ 0.017016] ACPI: Reserving DMAR table memory at [mem 0xbdff5000-0xbdff5097] [ 0.017018] ACPI: Reserving SSDT table memory at [mem 0xbdff4000-0xbdff4654] [ 0.017020] ACPI: Reserving HPET table memory at [mem 0xbdff2000-0xbdff2037] [ 0.017021] ACPI: Reserving APIC table memory at [mem 0xbdff1000-0xbdff106b] [ 0.017023] ACPI: Reserving MCFG table memory at [mem 0xbdff0000-0xbdff003b] [ 0.017025] ACPI: Reserving ASF! table memory at [mem 0xbdfef000-0xbdfef0a4] [ 0.017026] ACPI: Reserving SLIC table memory at [mem 0xbdfe3000-0xbdfe3175] [ 0.017028] ACPI: Reserving BOOT table memory at [mem 0xbdfe2000-0xbdfe2027] [ 0.017029] ACPI: Reserving SSDT table memory at [mem 0xbdfe1000-0xbdfe1295] [ 0.017207] No NUMA configuration found [ 0.017209] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.017223] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff] [ 0.017571] Zone ranges: [ 0.017572] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017576] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017578] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.017581] Device empty [ 0.017583] Movable zone start for each node [ 0.017587] Early memory node ranges [ 0.017588] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.017590] node 0: [mem 0x0000000000100000-0x00000000bde6afff] [ 0.017593] node 0: [mem 0x00000000bdebf000-0x00000000bdf82fff] [ 0.017594] node 0: [mem 0x00000000bdfbf000-0x00000000bdfdefff] [ 0.017596] node 0: [mem 0x00000000bdff6000-0x00000000bdffdfff] [ 0.017598] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff] [ 0.017600] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.017602] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.017611] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017670] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.042046] On node 0, zone DMA32: 84 pages in unavailable ranges [ 0.042054] On node 0, zone DMA32: 60 pages in unavailable ranges [ 0.042056] On node 0, zone DMA32: 23 pages in unavailable ranges [ 0.042058] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.050246] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.050717] ACPI: PM-Timer IO Port: 0x408 [ 0.050740] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.050744] ACPI: Using ACPI for processor (LAPIC) configuration information [ 0.050746] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.050755] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.050786] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.050790] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.050792] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.050794] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.050796] PM: hibernation: Registered nosave memory: [mem 0xbde6b000-0xbdebefff] [ 0.050799] PM: hibernation: Registered nosave memory: [mem 0xbdf83000-0xbdfbefff] [ 0.050802] PM: hibernation: Registered nosave memory: [mem 0xbdfdf000-0xbdff5fff] [ 0.050805] PM: hibernation: Registered nosave memory: [mem 0xbdffe000-0xbdffefff] [ 0.050807] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff] [ 0.050809] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.050810] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.050812] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.050813] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.050815] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.050816] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.050818] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.050819] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.050821] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.050822] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.050824] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.050825] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.050826] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffefffff] [ 0.050828] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.050831] [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.050834] Booting paravirtualized kernel on bare hardware [ 0.050840] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.050854] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.052141] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.052152] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.052157] pcpu-alloc: [0] 0 1 2 3 [ 0.052199] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.lz username=mint hostname=mint noapic noacpi nosplash irqpoll nomodeset -- [ 0.052427] Misrouted IRQ fixup and polling support enabled [ 0.052428] This may significantly impact system performance [ 0.052449] Booted with the nomodeset parameter. Only the system framebuffer will be available [ 0.052454] Unknown kernel command line parameters "noacpi nosplash BOOT_IMAGE=/casper/vmlinuz boot=casper username=mint", will be passed to user space. [ 0.054319] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.055319] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.055452] Fallback order for Node 0: 0 [ 0.055462] Built 1 zonelists, mobility grouping on. Total pages: 1023706 [ 0.055466] Policy zone: Normal [ 0.055482] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.055498] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address 0! BIOS vendor: Hewlett-Packard; Ver: F.2D; Product Version: F.2D [ 0.055505] software IO TLB: area num 4. [ 0.154257] Memory: 3897532K/4160468K available (22528K kernel code, 4440K rwdata, 14300K rodata, 4972K init, 4736K bss, 262676K reserved, 0K cma-reserved) [ 0.204287] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.204448] Kernel/User page tables isolation: enabled [ 0.204587] ftrace: allocating 57844 entries in 226 pages [ 0.218794] ftrace: allocated 226 pages with 4 groups [ 0.220227] Dynamic Preempt: voluntary [ 0.220490] rcu: Preemptible hierarchical RCU implementation. [ 0.220492] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.220495] Trampoline variant of Tasks RCU enabled. [ 0.220496] Rude variant of Tasks RCU enabled. [ 0.220496] Tracing variant of Tasks RCU enabled. [ 0.220498] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.220499] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.226563] NR_IRQS: 524544, nr_irqs: 80, preallocated irqs: 16 [ 0.226860] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.236625] Console: colour VGA+ 80x25 [ 0.236629] printk: legacy console [tty0] enabled [ 0.269346] ACPI: Core revision 20230628 [ 0.269910] ACPI: setting ELCR to 0200 (from 0c00) [ 0.270107] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.270324] APIC: Switch to symmetric I/O mode setup [ 0.270502] Not enabling interrupt remapping due to skipped IO-APIC setup [ 0.270690] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228262f08fd, max_idle_ns: 440795318008 ns [ 0.270899] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.16 BogoMIPS (lpj=2394084) [ 0.271115] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.271299] CPU0: Thermal monitoring enabled (TM1) [ 0.271921] process: using mwait in idle threads [ 0.272103] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.272282] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.272465] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.272663] Spectre V2 : Mitigation: Retpolines [ 0.272903] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.273098] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.273277] Speculative Store Bypass: Vulnerable [ 0.273455] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.273634] MMIO Stale Data: Unknown: No mitigations [ 0.273902] x86/fpu: x87 FPU will use FXSAVE [ 0.306902] Freeing SMP alternatives memory: 48K [ 0.307094] pid_max: default: 32768 minimum: 301 [ 0.308237] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.308736] landlock: Up and running. [ 0.308900] Yama: becoming mindful. [ 0.309207] AppArmor: AppArmor initialized [ 0.309732] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.309916] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.414421] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.414892] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.414892] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.414925] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.415158] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.415379] ... version: 2 [ 0.415555] ... bit width: 40 [ 0.415731] ... generic registers: 2 [ 0.415894] ... value mask: 000000ffffffffff [ 0.416072] ... max period: 000000007fffffff [ 0.416250] ... fixed-purpose events: 3 [ 0.416425] ... event mask: 0000000700000003 [ 0.416760] signal: max sigframe size: 1440 [ 0.416975] rcu: Hierarchical SRCU implementation. [ 0.417154] rcu: Max phase no-delay instances is 400. [ 0.418216] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.418532] smp: Bringing up secondary CPUs ... [ 0.418981] smpboot: x86: Booting SMP configuration: [ 0.419160] .... node #0, CPUs: #1 [ 0.420002] smp: Brought up 1 node, 2 CPUs [ 0.421255] smpboot: Max logical packages: 2 [ 0.421430] smpboot: Total of 2 processors activated (9576.33 BogoMIPS) [ 0.423150] devtmpfs: initialized [ 0.423167] x86/mm: Memory block size: 128MB [ 0.424932] ACPI: PM: Registering ACPI NVS region [mem 0xbdf83000-0xbdfbefff] (245760 bytes) [ 0.425235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.425449] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.426272] pinctrl core: initialized pinctrl subsystem [ 0.426703] PM: RTC time: 07:27:39, date: 2024-07-30 [ 0.428243] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.428838] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.429071] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.429448] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.429687] audit: initializing netlink subsys (disabled) [ 0.430043] audit: type=2000 audit(1722324459.159:1): state=initialized audit_enabled=0 res=1 [ 0.430348] thermal_sys: Registered thermal governor 'fair_share' [ 0.430351] thermal_sys: Registered thermal governor 'bang_bang' [ 0.430531] thermal_sys: Registered thermal governor 'step_wise' [ 0.430710] thermal_sys: Registered thermal governor 'user_space' [ 0.430895] thermal_sys: Registered thermal governor 'power_allocator' [ 0.431087] EISA bus registered [ 0.431459] cpuidle: using governor ladder [ 0.431642] cpuidle: using governor menu [ 0.431984] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.432164] Simple Boot Flag at 0x44 set to 0x1 [ 0.432365] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.433006] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.433211] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.433405] PCI: Using configuration type 1 for base access [ 0.433844] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.448892] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.448892] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.449948] ACPI: Added _OSI(Module Device) [ 0.450127] ACPI: Added _OSI(Processor Device) [ 0.450305] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.450482] ACPI: Added _OSI(Processor Aggregator Device) [ 0.458934] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.460527] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.476895] ACPI: Dynamic OEM Table Load: [ 0.476895] ACPI: SSDT 0xFFFF8BEC00F4E000 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.477694] ACPI: Dynamic OEM Table Load: [ 0.477877] ACPI: SSDT 0xFFFF8BEC01037000 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.479292] ACPI: Dynamic OEM Table Load: [ 0.479475] ACPI: SSDT 0xFFFF8BEC00A18E00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.480483] ACPI: Dynamic OEM Table Load: [ 0.480665] ACPI: SSDT 0xFFFF8BEC0105D180 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.481722] ACPI: _OSC evaluated successfully for all CPUs [ 0.482061] ACPI: EC: EC started [ 0.482237] ACPI: EC: interrupt blocked [ 0.707928] ACPI: EC: EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 0.708109] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC used to handle transactions [ 0.708305] ACPI: Interpreter enabled [ 0.708515] ACPI: PM: (supports S0 S3 S4 S5) [ 0.708692] ACPI: Using PIC for interrupt routing [ 0.709828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.709893] PCI: Using E820 reservations for host bridge windows [ 0.710387] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.880427] ACPI: _TZ_.FN00: New power resource [ 1.031497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.031685] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 1.031890] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 1.032090] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 1.032288] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.032504] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.033627] PCI host bridge to bus 0000:00 [ 1.033805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.033894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.034075] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.034270] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.034466] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.034672] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 conventional PCI endpoint [ 1.034919] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 1.035114] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 1.035377] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 PCIe Root Port [ 1.035587] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.035767] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 1.035895] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 1.036080] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.036305] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.036661] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 conventional PCI endpoint [ 1.036955] pci 0000:00:1a.0: BAR 4 [io 0x80e0-0x80ff] [ 1.037322] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 conventional PCI endpoint [ 1.037583] pci 0000:00:1a.1: BAR 4 [io 0x80c0-0x80df] [ 1.038048] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 conventional PCI endpoint [ 1.038267] pci 0000:00:1a.7: BAR 0 [mem 0xdf004c00-0xdf004fff] [ 1.043015] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.043324] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 1.043324] pci 0000:00:1b.0: BAR 0 [mem 0xdf000000-0xdf003fff 64bit] [ 1.043324] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.043527] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 PCIe Root Port [ 1.043756] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.043897] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 1.044079] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff] [ 1.044269] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 1.044535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.045009] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 PCIe Root Port [ 1.045237] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.045418] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 1.045600] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff] [ 1.045791] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 1.045963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.046303] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 PCIe Root Port [ 1.046531] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.046712] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 1.046897] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff] [ 1.047088] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref] [ 1.047353] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.047702] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 PCIe Root Port [ 1.047926] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.048108] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 1.048289] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff] [ 1.048480] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 1.048744] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.049048] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 PCIe Root Port [ 1.049276] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 1.049457] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 1.049639] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff] [ 1.049904] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 1.050169] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.050506] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 PCIe Root Port [ 1.050734] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 1.050897] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 1.051080] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff] [ 1.051271] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref] [ 1.051534] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.051959] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.052222] pci 0000:00:1d.0: BAR 4 [io 0x80a0-0x80bf] [ 1.052583] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.052847] pci 0000:00:1d.1: BAR 4 [io 0x8080-0x809f] [ 1.053069] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.053332] pci 0000:00:1d.2: BAR 4 [io 0x8060-0x807f] [ 1.053689] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 conventional PCI endpoint [ 1.053961] pci 0000:00:1d.3: BAR 4 [io 0x8040-0x805f] [ 1.054341] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.054559] pci 0000:00:1d.7: BAR 0 [mem 0xdf004800-0xdf004bff] [ 1.054993] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.055305] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge [ 1.055532] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 1.055889] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 conventional PCI endpoint [ 1.056374] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 conventional PCI endpoint [ 1.056586] pci 0000:00:1f.2: BAR 0 [io 0x8108-0x810f] [ 1.056773] pci 0000:00:1f.2: BAR 1 [io 0x8114-0x8117] [ 1.056901] pci 0000:00:1f.2: BAR 2 [io 0x8100-0x8107] [ 1.057089] pci 0000:00:1f.2: BAR 3 [io 0x8110-0x8113] [ 1.057274] pci 0000:00:1f.2: BAR 4 [io 0x8020-0x803f] [ 1.057460] pci 0000:00:1f.2: BAR 5 [mem 0xdf004000-0xdf0047ff] [ 1.057692] pci 0000:00:1f.2: PME# supported from D3hot [ 1.058020] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.058237] pci 0000:00:1f.3: BAR 0 [mem 0xdf005000-0xdf0050ff 64bit] [ 1.058440] pci 0000:00:1f.3: BAR 4 [io 0x8000-0x801f] [ 1.058908] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000 PCIe Endpoint [ 1.059155] pci 0000:01:00.0: BAR 0 [mem 0xd2000000-0xd2ffffff] [ 1.059354] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.059555] pci 0000:01:00.0: BAR 3 [mem 0xd0000000-0xd1ffffff 64bit] [ 1.059748] pci 0000:01:00.0: BAR 5 [io 0x7000-0x707f] [ 1.059908] pci 0000:01:00.0: ROM [mem 0xfff80000-0xffffffff pref] [ 1.060123] pci 0000:01:00.0: enabling Extended Tags [ 1.060358] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.060732] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link) [ 1.061104] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.061406] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000 PCIe Endpoint [ 1.061647] pci 0000:02:00.0: BAR 0 [mem 0xde000000-0xde001fff 64bit] [ 1.062103] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.062519] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.062775] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.062966] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.063319] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 1.063590] pci 0000:05:00.0: BAR 0 [io 0x3000-0x30ff] [ 1.063968] pci 0000:05:00.0: BAR 2 [mem 0xd6010000-0xd6010fff 64bit pref] [ 1.064211] pci 0000:05:00.0: BAR 4 [mem 0xd6000000-0xd600ffff 64bit pref] [ 1.064425] pci 0000:05:00.0: ROM [mem 0xffff0000-0xffffffff pref] [ 1.064876] pci 0000:05:00.0: supports D1 D2 [ 1.065894] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.066449] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.066449] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010 PCIe Endpoint [ 1.066449] pci 0000:06:00.0: BAR 0 [mem 0xda000000-0xda0007ff] [ 1.066449] pci 0000:06:00.0: BAR 1 [mem 0xda000d00-0xda000d7f] [ 1.066620] pci 0000:06:00.0: BAR 4 [mem 0xda000c80-0xda000cff] [ 1.066817] pci 0000:06:00.0: BAR 5 [mem 0xda000c00-0xda000c7f] [ 1.067182] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000 PCIe Endpoint [ 1.067406] pci 0000:06:00.1: BAR 0 [mem 0xda000b00-0xda000bff] [ 1.068032] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501 PCIe Endpoint [ 1.068256] pci 0000:06:00.2: BAR 0 [mem 0xda000a00-0xda000aff] [ 1.068773] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000 PCIe Endpoint [ 1.068921] pci 0000:06:00.3: BAR 0 [mem 0xda000900-0xda0009ff] [ 1.069433] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000 PCIe Endpoint [ 1.069657] pci 0000:06:00.4: BAR 0 [mem 0xda000800-0xda0008ff] [ 1.070263] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 1.070520] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 1.070730] pci_bus 0000:0a: extended config space not accessible [ 1.070968] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 1.071160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.071356] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.071551] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.071748] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 1.072146] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.072428] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.072709] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.072995] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.073276] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 1.073556] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 1.073935] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.074215] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 1.074395] ACPI: PCI: Interrupt link LNKH disabled [ 1.085893] ACPI: EC: interrupt unblocked [ 1.086072] ACPI: EC: event unblocked [ 1.086249] ACPI: EC: EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 1.086425] ACPI: EC: GPE=0x17 [ 1.086600] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC initialization complete [ 1.086783] ACPI: _SB.PCI0.LPC.EC0_: EC: Used to handle transactions and events [ 1.087964] iommu: Default domain type: Translated [ 1.088077] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.088617] SCSI subsystem initialized [ 1.088923] libata version 3.00 loaded. [ 1.088957] ACPI: bus type USB registered [ 1.089159] usbcore: registered new interface driver usbfs [ 1.089342] usbcore: registered new interface driver hub [ 1.089536] usbcore: registered new device driver usb [ 1.089536] pps_core: LinuxPPS API ver. 1 registered [ 1.089536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.089536] PTP clock support registered [ 1.089929] EDAC MC: Ver: 3.0.0 [ 1.091316] NetLabel: Initializing [ 1.091493] NetLabel: domain hash size = 128 [ 1.091493] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.091493] NetLabel: unlabeled traffic allowed by default [ 1.091932] mctp: management component transport protocol core [ 1.095895] NET: Registered PF_MCTP protocol family [ 1.096086] PCI: Using ACPI for IRQ routing [ 1.097802] PCI: pci_cache_line_size set to 64 bytes [ 1.097931] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.097935] e820: reserve RAM buffer [mem 0xbde6b000-0xbfffffff] [ 1.097937] e820: reserve RAM buffer [mem 0xbdf83000-0xbfffffff] [ 1.097939] e820: reserve RAM buffer [mem 0xbdfdf000-0xbfffffff] [ 1.097941] e820: reserve RAM buffer [mem 0xbdffe000-0xbfffffff] [ 1.097943] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 1.097969] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 1.098098] pci 0000:01:00.0: vgaarb: bridge control possible [ 1.098276] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.098474] vgaarb: loaded [ 1.099001] hpet: 4 channels of 0 reserved for per-cpu timers [ 1.099896] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.100079] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.101954] clocksource: Switched to clocksource tsc-early [ 1.103798] VFS: Disk quotas dquot_6.6.0 [ 1.104023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.104480] AppArmor: AppArmor Filesystem Enabled [ 1.104690] pnp: PnP ACPI init [ 1.226732] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff] [ 1.227029] system 00:00: [io 0x0600-0x060f] has been reserved [ 1.227211] system 00:00: [io 0x0610] has been reserved [ 1.227388] system 00:00: [io 0x0800-0x080f] has been reserved [ 1.227572] system 00:00: [io 0x0810-0x0817] has been reserved [ 1.227752] system 00:00: [io 0x0820-0x0823] has been reserved [ 1.227930] system 00:00: [io 0x0400-0x047f] has been reserved [ 1.228109] system 00:00: [io 0x0500-0x053f] has been reserved [ 1.228290] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.228474] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.228655] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.228835] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.229016] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.229197] system 00:00: [mem 0xfec00000-0xfec00fff] has been reserved [ 1.229378] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.229562] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.230216] pnp: PnP ACPI: found 5 devices [ 1.237714] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.238143] NET: Registered PF_INET protocol family [ 1.238494] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.263001] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.263258] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.263575] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.264005] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 1.264365] TCP: Hash tables configured (established 32768 bind 32768) [ 1.264765] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 1.265028] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.265237] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.265543] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.265738] NET: Registered PF_XDP protocol family [ 1.265923] pci 0000:05:00.0: ROM [mem 0xffff0000-0xffffffff pref]: can't claim; no compatible bridge window [ 1.266148] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.266328] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 1.266515] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 1.266697] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.266895] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.267075] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 1.267257] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff] [ 1.267440] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 1.267643] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.267823] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 1.268006] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff] [ 1.268188] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 1.268388] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.268570] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 1.268752] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff] [ 1.268935] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]

[ 1.269322] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.269503] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 1.269687] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff] [ 1.269869] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 1.270072] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 1.270251] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 1.270434] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff] [ 1.270620] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 1.270820] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 1.271000] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 1.271182] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff] [ 1.271364] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref] [ 1.271569] pci 0000:00:1e.0: PCI bridge to [bus 0a] [ 1.271758] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.271938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.272117] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.272298] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 1.272481] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 1.272661] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff] [ 1.272841] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.273036] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 1.273215] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdeffffff] [ 1.273394] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref] [ 1.273591] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 1.273770] pci_bus 0000:03: resource 1 [mem 0xdd000000-0xddffffff] [ 1.273949] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref] [ 1.274145] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 1.274322] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdcffffff] [ 1.274506] pci_bus 0000:04: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref] [ 1.274701] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 1.274880] pci_bus 0000:05: resource 1 [mem 0xdb000000-0xdbffffff] [ 1.275059] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd6ffffff 64bit pref] [ 1.275254] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 1.275433] pci_bus 0000:06: resource 1 [mem 0xda000000-0xdaffffff] [ 1.275615] pci_bus 0000:06: resource 2 [mem 0xd7000000-0xd7ffffff 64bit pref] [ 1.275811] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 1.275990] pci_bus 0000:07: resource 1 [mem 0xd9000000-0xd9ffffff] [ 1.276169] pci_bus 0000:07: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref] [ 1.276364] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7 window] [ 1.276546] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff window] [ 1.276726] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.276907] pcibus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff window] [ 1.277683] ACPI: _SB.PCI0.LPC.LNKA: Enabled at IRQ 11 [ 1.277865] PCI: setting IRQ 11 as level-triggered [ 1.278508] ACPI: _SB.PCI0.LPC.LNKB: Enabled at IRQ 10 [ 1.278688] PCI: setting IRQ 10 as level-triggered [ 1.279329] ACPI: _SB.PCI0.LPC_.LNKC: Enabled at IRQ 11 [ 2.481013] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.481557] pci 0000:00:1a.7: quirk_usb_earlyhandoff+0x0/0x190 took 1174408 usecs [ 2.482166] ACPI: _SB.PCI0.LPC.LNKE: Enabled at IRQ 11 [ 2.482979] ACPI: _SB.PCI0.LPC.LNKG: Enabled at IRQ 11 [ 2.484311] ACPI: _SB.PCI0.LPC_.LNKD: Enabled at IRQ 11 [ 3.685013] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.685553] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x190 took 1172651 usecs [ 3.685835] PCI: CLS 64 bytes, default 64 [ 3.686025] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.686122] Trying to unpack rootfs image as initramfs... [ 3.686205] software IO TLB: mapped [mem 0x00000000b9e6b000-0x00000000bde6b000] (64MB) [ 3.687569] Initialise system trusted keyrings [ 3.687785] Key type blacklist registered [ 3.688130] workingset: timestamp_bits=36 max_order=20 bucketorder=0 [ 3.688348] zbud: loaded [ 3.690827] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.692145] fuse: init (API version 7.39) [ 3.692730] integrity: Platform Keyring initialized [ 3.692923] integrity: Machine keyring initialized [ 3.713615] Key type asymmetric registered [ 3.713810] Asymmetric key parser 'x509' registered [ 3.714061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.714404] io scheduler mq-deadline registered [ 3.717739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.718043] Driver imsttfb not loading because of nomodeset parameter [ 3.718226] Driver asiliantfb not loading because of nomodeset parameter [ 3.718555] Monitor-Mwait will be used to enter C-1 state [ 3.718566] Monitor-Mwait will be used to enter C-2 state [ 3.718572] Monitor-Mwait will be used to enter C-3 state [ 3.718578] ACPI: _PR.CPU0: Found 3 idle states [ 3.863279] ACPI: AC: AC Adapter [AC] (on-line) [ 3.863676] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.863911] ACPI: button: Power Button [PWRB] [ 3.864157] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.864385] ACPI: button: Lid Switch [LID0] [ 3.864610] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 3.864877] ACPI: button: Sleep Button [SLPB] [ 3.865160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.865412] ACPI: button: Power Button [PWRF] [ 3.911517] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.911713] ACPI: thermal: Thermal Zone [THRM] (53 C) [ 3.912567] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.917371] Linux agpgart interface v0.103 [ 3.920757] loop: module loaded [ 3.925477] ACPI: bus type drm_connector registered [ 3.926223] tun: Universal TUN/TAP device driver, 1.6 [ 3.926479] PPP generic driver version 2.4.2 [ 3.927288] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.927477] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.927687] ehci-pci 0000:00:1a.7: debug port 1 [ 3.932486] ehci-pci 0000:00:1a.7: irq 11, io mem 0xdf004c00 [ 3.939136] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.939442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 3.939640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.939835] usb usb1: Product: EHCI Host Controller [ 3.940019] usb usb1: Manufacturer: Linux 6.8.0-38-generic ehci_hcd [ 3.940200] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.940609] hub 1-0:1.0: USB hub found [ 3.940805] hub 1-0:1.0: 4 ports detected [ 3.941204] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.941393] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 3.941600] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.941812] uhci_hcd 0000:00:1a.0: irq 11, io port 0x000080e0 [ 3.942183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.942395] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.942594] usb usb2: Product: UHCI Host Controller [ 3.942774] usb usb2: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.942955] usb usb2: SerialNumber: 0000:00:1a.0 [ 3.943838] hub 2-0:1.0: USB hub found [ 3.944091] hub 2-0:1.0: 2 ports detected [ 3.944693] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.944909] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 3.945149] ehci-pci 0000:00:1d.7: debug port 1 [ 3.950327] ehci-pci 0000:00:1d.7: irq 11, io mem 0xdf004800 [ 3.957190] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.957612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 3.957814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.958021] usb usb3: Product: EHCI Host Controller [ 3.958201] usb usb3: Manufacturer: Linux 6.8.0-38-generic ehci_hcd [ 3.958382] usb usb3: SerialNumber: 0000:00:1d.7 [ 3.959144] hub 3-0:1.0: USB hub found [ 3.959370] hub 3-0:1.0: 8 ports detected [ 3.960144] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.960366] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.960579] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.960809] uhci_hcd 0000:00:1a.1: irq 10, io port 0x000080c0 [ 3.961225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.961439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.961636] usb usb4: Product: UHCI Host Controller [ 3.961814] usb usb4: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.961996] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.962871] hub 4-0:1.0: USB hub found [ 3.963133] hub 4-0:1.0: 2 ports detected [ 3.964240] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.964473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.964688] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.964907] uhci_hcd 0000:00:1d.0: irq 11, io port 0x000080a0 [ 3.965332] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.965542] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.965740] usb usb5: Product: UHCI Host Controller [ 3.965920] usb usb5: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.966146] usb usb5: SerialNumber: 0000:00:1d.0 [ 3.966869] hub 5-0:1.0: USB hub found [ 3.967109] hub 5-0:1.0: 2 ports detected [ 3.968194] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.968426] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.968641] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.968863] uhci_hcd 0000:00:1d.1: irq 11, io port 0x00008080 [ 3.969245] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.969460] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.969657] usb usb6: Product: UHCI Host Controller [ 3.969836] usb usb6: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.970064] usb usb6: SerialNumber: 0000:00:1d.1 [ 3.970818] hub 6-0:1.0: USB hub found [ 3.971066] hub 6-0:1.0: 2 ports detected [ 3.972146] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.972370] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.972491] Freeing initrd memory: 71152K [ 3.972596] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.972968] uhci_hcd 0000:00:1d.2: irq 11, io port 0x00008060 [ 3.973301] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.973510] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.973704] usb usb7: Product: UHCI Host Controller [ 3.973882] usb usb7: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.974078] usb usb7: SerialNumber: 0000:00:1d.2 [ 3.974482] hub 7-0:1.0: USB hub found [ 3.974668] hub 7-0:1.0: 2 ports detected [ 3.975368] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.975551] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 3.975751] uhci_hcd 0000:00:1d.3: detected 2 ports [ 3.975947] uhci_hcd 0000:00:1d.3: irq 11, io port 0x00008040 [ 3.976241] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.976444] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.976638] usb usb8: Product: UHCI Host Controller [ 3.976816] usb usb8: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.976995] usb usb8: SerialNumber: 0000:00:1d.3 [ 3.977319] hub 8-0:1.0: USB hub found [ 3.977516] hub 8-0:1.0: 2 ports detected [ 3.977937] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 4.022495] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.022776] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.023235] mousedev: PS/2 mouse device common for all mice [ 4.024723] rtc_cmos 00:01: RTC can wake from S4 [ 4.025201] rtc_cmos 00:01: registered as rtc0 [ 4.025412] rtc_cmos 00:01: setting system clock to 2024-07-30T07:27:43 UTC (1722324463) [ 4.025654] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 4.025860] i2c_dev: i2c /dev entries driver [ 4.026245] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 4.026510] device-mapper: uevent: version 1.0.3 [ 4.026778] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.027023] platform eisa.0: Probing EISA bus 0 [ 4.027306] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 4.027487] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 4.027667] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 4.027847] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 4.028032] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 4.028213] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 4.028393] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 4.028572] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 4.028752] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 4.028931] platform eisa.0: EISA: Detected 0 cards [ 4.029113] intel_pstate: CPU model not supported [ 4.029327] ledtrig-cpu: registered to indicate activity on CPUs [ 4.029630] drop_monitor: Initializing network drop monitor service [ 4.030127] NET: Registered PF_INET6 protocol family [ 4.042389] Segment Routing with IPv6 [ 4.042609] In-situ OAM (IOAM) with IPv6 [ 4.042830] NET: Registered PF_PACKET protocol family [ 4.043132] Key type dns_resolver registered [ 4.043676] microcode: Current revision: 0x0000060f [ 4.043951] IPI shorthand broadcast: enabled [ 4.047592] sched_clock: Marking stable (4003002288, 44003246)->(4100367272, -53361738) [ 4.047986] registered taskstats version 1 [ 4.048469] Loading compiled-in X.509 certificates [ 4.049984] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 4.051141] ACPI: battery: Slot [BAT0] (battery absent) [ 4.051544] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 4.052854] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 4.053092] blacklist: Loading compiled-in revocation X.509 certificates [ 4.053375] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 4.053402] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.053598] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 4.054001] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 4.056160] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 4.056486] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 4.060645] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 4.060915] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 4.061180] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 4.069179] Key type .fscrypt registered [ 4.069377] Key type fscrypt-provisioning registered [ 4.080604] cryptd: max_cpu_qlen set to 1000 [ 4.120246] Key type encrypted registered [ 4.120440] AppArmor: AppArmor sha256 policy hashing enabled [ 4.120632] ima: No TPM chip found, activating TPM-bypass! [ 4.120821] Loading compiled-in module X.509 certificates [ 4.122190] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 4.122390] ima: Allocated hash algorithm: sha256 [ 4.122582] ima: No architecture policies found [ 4.122782] evm: Initialising EVM extended attributes: [ 4.122960] evm: security.selinux [ 4.123173] evm: security.SMACK64 [ 4.123402] evm: security.SMACK64EXEC [ 4.123577] evm: security.SMACK64TRANSMUTE [ 4.123752] evm: security.SMACK64MMAP [ 4.123927] evm: security.apparmor [ 4.124135] evm: security.ima [ 4.124371] evm: security.capability [ 4.124546] evm: HMAC attrs: 0x1 [ 4.125240] PM: Magic number: 0:927:471 [ 4.132875] RAS: Correctable Errors collector initialized. [ 4.133300] clk: Disabling unused clocks [ 4.137173] Freeing unused decrypted memory: 2028K [ 4.139459] Freeing unused kernel image (initmem) memory: 4972K [ 4.139740] Write protecting the kernel read-only data: 36864k [ 4.140230] Freeing unused kernel image (rodata/data gap) memory: 36K [ 4.199854] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.200078] x86/mm: Checking user space page tables [ 4.258908] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.259107] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 4.259393] Run /init as init process [ 4.259603] with arguments: [ 4.259605] /init [ 4.259607] noacpi [ 4.259608] nosplash [ 4.259610] with environment: [ 4.259611] HOME=/ [ 4.259612] TERM=linux [ 4.259614] BOOT_IMAGE=/casper/vmlinuz [ 4.259615] boot=casper [ 4.259617] username=mint [ 4.373025] usb 2-2: new full-speed USB device number 2 using uhci_hcd [ 4.389098] usb 3-2: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [ 4.389317] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.389498] usb 3-2: Product: TransMemory
[ 4.389675] usb 3-2: Manufacturer: TOSHIBA [ 4.389851] usb 3-2: SerialNumber: C412F52D6CA6CF71000755BB [ 4.396970] usb-storage 3-2:1.0: USB Mass Storage device detected [ 4.397718] scsi host0: usb-storage 3-2:1.0 [ 4.398200] usbcore: registered new interface driver usb-storage [ 4.401554] usbcore: registered new interface driver uas [ 4.475000] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799AC3-9429-4529-927E-DFE13736EEBA has zero instances [ 4.475223] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799AC5-9429-4529-927E-DFE13736EEBA has zero instances [ 4.475422] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799ACA-9429-4529-927E-DFE13736EEBA has zero instances [ 4.475620] wmi_bus wmibus-PNP0C14:00: [Firmware Info]: A1799ACB-9429-4529-927E-DFE13736EEBA has zero instances [ 4.500588] sdhci: Secure Digital Host Controller Interface driver [ 4.500782] sdhci: Copyright(c) Pierre Ossman [ 4.508036] usb 3-5: new high-speed USB device number 3 using ehci-pci [ 4.518234] ACPI: video: Video Device [EVGA] (multi-head: yes rom: no post: no) [ 4.518842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 4.519998] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.522632] ahci 0000:00:1f.2: version 3.0 [ 4.523160] ACPI: _SB.PCI0.LPC_.LNKF: Enabled at IRQ 11 [ 4.523550] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.523769] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 4.523968] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 4.526928] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0) [ 4.527170] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0) [ 4.527585] r8169 0000:05:00.0 eth0: RTL8168c/8111c, 00:23:5a:1e:a7:9e, XID 3c2, IRQ 16 [ 4.527784] r8169 0000:05:00.0 eth0: jumbo features [frames: 6122 bytes, tx checksumming: ko] [ 4.528324] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 4.528765] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA [ 4.529744] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface. [ 4.530120] usb 2-2: New USB device found, idVendor=138a, idProduct=0001, bcdDevice= 3.72 [ 4.530321] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.532372] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 4.536844] scsi host1: ahci [ 4.537391] scsi host2: ahci [ 4.539431] scsi host3: ahci [ 4.539877] scsi host4: ahci [ 4.540549] scsi host5: ahci [ 4.541532] scsi host6: ahci [ 4.541833] ata1: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004100 irq 17 lpm-pol 3 [ 4.542042] ata2: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004180 irq 17 lpm-pol 3 [ 4.542244] ata3: DUMMY [ 4.542417] ata4: DUMMY [ 4.542605] ata5: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004300 irq 17 lpm-pol 3 [ 4.542802] ata6: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004380 irq 17 lpm-pol 3 [ 4.570277] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 4.656829] usb 3-5: New USB device found, idVendor=064e, idProduct=c107, bcdDevice= 1.00 [ 4.657049] usb 3-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 4.657232] usb 3-5: Product: HP Webcam [ 4.657409] usb 3-5: Manufacturer: SuYin [ 4.657585] usb 3-5: SerialNumber: CN0314-MM00-MI06-VH-R53.90.01 [ 4.719070] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x228262f08fd, max_idle_ns: 440795318008 ns [ 4.719346] clocksource: Switched to clocksource tsc [ 5.016263] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.017104] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.017141] ata1.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.017386] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.017798] ata1.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.017918] ata1.00: supports DRM functions and may not be fully accessible [ 5.018426] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 [ 5.019062] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.019738] ata1.00: Features: Trust NCQ-sndrcv [ 5.020431] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.020469] ata1.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.020672] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.023321] ata1.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.023346] ata1.00: supports DRM functions and may not be fully accessible [ 5.024534] ata1.00: configured for UDMA/133 [ 5.038083] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 5.038751] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.038920] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 5.039334] sd 1:0:0:0: [sda] Write Protect is off [ 5.039515] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.039541] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.039783] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.041378] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 5.042393] sd 1:0:0:0: [sda] supports TCG Opal [ 5.042574] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.068237] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 5.071246] firewire_core 0000:06:00.0: created device fw0: GUID 8c3f020087c940d9, S400 [ 5.203653] usb 1-3: New USB device found, idVendor=07ca, idProduct=a309, bcdDevice= 2.00 [ 5.203886] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.204073] usb 1-3: Product: A309 [ 5.204263] usb 1-3: Manufacturer: AVerMedia [ 5.204440] usb 1-3: SerialNumber: 301161402613000 [ 5.229574] psmouse serio1: synaptics: queried max coordinates: x [..5608], y [..4638] [ 5.279040] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 501069380 wd_nsec: 1395823030 [ 5.292766] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000/0x0, board id: 0, fw id: 509933 [ 5.360956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 5.441085] scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [ 5.441771] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 5.443351] sd 0:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB) [ 5.444149] sd 0:0:0:0: [sdb] Write Protect is off [ 5.444397] sd 0:0:0:0: [sdb] Mode Sense: 45 00 00 00 [ 5.445138] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.449745] sdb: sdb1 [ 5.450193] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 5.511091] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.513477] ata2.00: ACPI cmd 00/00:00:00:00:00:b0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.513589] ata2.00: ACPI cmd ef/10:03:00:00:00:b0(SET FEATURES) filtered out [ 5.518332] ata2.00: ACPI cmd ef/10:04:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.518412] ata2.00: ACPI cmd ef/10:05:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.520561] ata2.00: ATA-9: WDC WDS250G1B0A-00H9H0, X41110WD, max UDMA/133 [ 5.521215] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.522195] ata2.00: Features: Dev-Sleep [ 5.524232] ata2.00: ACPI cmd 00/00:00:00:00:00:b0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.524241] ata2.00: ACPI cmd ef/10:03:00:00:00:b0(SET FEATURES) filtered out [ 5.524704] ata2.00: ACPI cmd ef/10:04:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.524755] ata2.00: ACPI cmd ef/10:05:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.526199] ata2.00: configured for UDMA/133 [ 5.526932] scsi 2:0:0:0: Direct-Access ATA WDC WDS250G1B0A- 10WD PQ: 0 ANSI: 5 [ 5.527891] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.528226] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 5.528596] sd 2:0:0:0: [sdc] Write Protect is off [ 5.528810] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.528847] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.529150] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 5.531933] sdc: [ 5.532330] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.783060] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 504019036 wd_nsec: 18271384511 [ 5.815123] random: crng init done [ 5.991161] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.992704] ata5.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.992806] ata5.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.993116] ata5.00: ACPI cmd ef/10:02:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.993320] ata5.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.993791] ata5.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.993918] ata5.00: ACPI cmd ef/10:05:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.994131] ata5.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100 [ 5.996667] ata5.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.996768] ata5.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.997071] ata5.00: ACPI cmd ef/10:02:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.997274] ata5.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.997757] ata5.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.997857] ata5.00: ACPI cmd ef/10:05:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.998072] ata5.00: configured for UDMA/100 [ 6.010583] scsi 5:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.83 PQ: 0 ANSI: 5 [ 6.027997] sr 5:0:0:0: [sr0] scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.028251] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.048841] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6.048967] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 6.287044] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 503983819 wd_nsec: 38267051418 [ 6.357532] ata6: SATA link down (SStatus 0 SControl 300) [ 7.295039] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 503920577 wd_nsec: 87863180997 [ 7.749052] raid6: sse2x4 gen() 8975 MB/s [ 7.766053] raid6: sse2x2 gen() 8973 MB/s [ 7.783049] raid6: sse2x1 gen() 7576 MB/s [ 7.783294] raid6: using algorithm sse2x4 gen() 8975 MB/s [ 7.800053] raid6: .... xor() 3424 MB/s, rmw enabled [ 7.800297] raid6: using ssse3x2 recovery algorithm [ 7.802329] xor: measuring software checksum speed [ 7.803315] prefetch64-sse : 13037 MB/sec [ 7.804416] generic_sse : 11116 MB/sec [ 7.804594] xor: using function: prefetch64-sse (13037 MB/sec) [ 7.806440] async_tx: api initialized (async) [ 8.303031] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 8.303306] clocksource: 'hpet' wd_nsec: 504761394 wd_now: b4cb019a wd_last: b45cba1a mask: ffffffff [ 8.303506] clocksource: 'tsc' cs_nsec: 503975917 cs_now: 1334c717df cs_last: 12ecdc7050 mask: ffffffffffffffff [ 8.303709] clocksource: Clocksource 'tsc' skewed -785477 ns (0 ms) over watchdog 'hpet' interval of 504761394 ns (504 ms) [ 8.303912] clocksource: 'tsc' is current clocksource. [ 8.304151] tsc: Marking TSC unstable due to clocksource watchdog [ 8.304416] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 8.304612] sched_clock: Marking unstable (8260412994, 44003215)<-(8357777936, -53361738) [ 8.304950] clocksource: Checking clocksource tsc synchronization from CPU 1 to CPUs 0. [ 8.305174] clocksource: Switched to clocksource hpet [ 10.546537] loop0: detected capacity change from 0 to 4798088 [ 10.594532] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 10.809361] evm: overlay not supported [ 22.979778] systemd[1]: Inserted module 'autofs4' [ 23.101231] systemd[1]: systemd 255.4-1ubuntu8.2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 23.101531] systemd[1]: Detected architecture x86-64. [ 23.132335] systemd[1]: Initializing machine ID from random generator. [ 23.572120] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 23.634900] systemd[1]: Queued start job for default target graphical.target. [ 23.669292] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 23.670586] systemd[1]: Created slice user.slice - User and Session Slice. [ 23.671436] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 23.672493] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 23.673275] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 23.673928] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 23.674731] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 23.675488] systemd[1]: Reached target slices.target - Slice Units. [ 23.676241] systemd[1]: Reached target swap.target - Swaps. [ 23.676857] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 23.677653] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 23.680744] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 23.682251] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 23.686527] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 23.687397] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 23.688224] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 23.689068] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 23.689719] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 23.691945] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 23.692883] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 23.705243] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 23.709218] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 23.715212] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 23.727284] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 23.734377] systemd[1]: Starting systemd-journald.service - Journal Service... [ 23.735286] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 23.739355] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 23.749284] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 23.760322] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 23.770297] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 23.791973] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 23.806425] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 23.823944] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 23.853283] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 23.855369] systemd-journald[848]: Collecting audit messages is disabled. [ 23.860453] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 23.896100] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 23.899095] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 23.917003] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 23.918742] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 23.935765] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 23.962372] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 23.964618] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 23.968463] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 23.973155] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 23.976461] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 23.988086] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 23.988592] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 23.990513] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 23.991000] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 23.998736] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 23.999559] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 24.000713] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 24.006838] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 24.008374] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 24.008945] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 24.013199] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 24.013749] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 24.021174] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 24.029347] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 24.037240] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 24.103890] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because no trigger condition checks were met. [ 24.113430] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 24.134246] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 24.176823] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 24.190871] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 24.193904] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 24.201764] lp: driver loaded but no devices found [ 24.208884] systemd[1]: Started systemd-journald.service - Journal Service. [ 24.238041] ppdev: user-space parallel port driver [ 24.342478] systemd-journald[848]: Received client request to flush runtime journal. [ 25.514891] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0 [ 25.514900] ene_ir: PLL freq = 1406 [ 25.514902] ene_ir: KB3926C detected [ 25.514917] ene_ir: Firmware regs: 20 00 [ 25.514918] ene_ir: Hardware features: [ 25.514920] ene_ir: * Uses GPIO 40 for IR demodulated input [ 25.536034] hp_accel: hardware type DV7 found [ 25.536801] lis3lv02d: 8 bits sensor found [ 25.562364] Registered IR keymap rc-rc6-mce [ 25.574940] IR RC6 protocol handler initialized [ 25.583515] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 [ 25.597120] rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0 [ 25.598618] rc rc0: lirc_dev: driver ene_ir registered at minor = 0, raw IR receiver, no transmitter [ 25.598685] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8 [ 25.601042] rc rc0: nonsensical timing event of duration 0 [ 25.601047] rc rc0: two consecutive events of type space [ 25.601056] ene_ir: driver has been successfully loaded [ 25.896755] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20230628/utaddress-204) [ 25.896770] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 25.896775] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20230628/utaddress-204) [ 25.896780] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 25.896782] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20230628/utaddress-204) [ 25.896788] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 25.896789] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 25.998813] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 26.007586] mc: Linux media interface: v0.10 [ 26.008621] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.009182] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 26.267161] Intel(R) Wireless WiFi driver for Linux [ 26.267431] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 26.276806] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1 [ 26.276823] iwlwifi 0000:02:00.0: PCI dev 4237/1211, rev=0x54, rfid=0xd55555d5 [ 26.313907] usb 1-3: dvb_usb_v2: found a 'AVerMedia A309' in cold state [ 26.314481] usb 1-3: Direct firmware load for dvb-usb-af9015.fw failed with error -2 [ 26.314490] usb 1-3: dvb_usb_v2: Did not find the firmware file 'dvb-usb-af9015.fw' (status -2). You can use /scripts/get_dvb_firmware to get the firmware [ 26.314835] dvb_usb_af9015: probe of 1-3:1.0 failed with error -2 [ 26.316810] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 26.324925] usbcore: registered new interface driver dvb_usb_af9015 [ 26.325858] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode op_mode iwldvm [ 26.326109] intel_powerclamp: No package C-state available [ 26.326180] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 26.326572] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 26.328085] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 26.331428] videodev: Linux video capture interface: v2.00 [ 26.620615] at24 0-0050: supply vcc not found, using dummy regulator [ 26.629386] at24 0-0050: 256 byte spd EEPROM, read-only [ 26.633912] usb 3-5: Found UVC 1.00 device HP Webcam (064e:c107) [ 26.660283] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb3/3-5/3-5:1.0/input/input11 [ 26.660472] usbcore: registered new interface driver uvcvideo [ 26.672847] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 26.672857] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 26.672859] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 26.672862] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 26.678448] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled) [ 26.694572] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio. [ 26.719758] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 26.749748] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 27.320663] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 27.320674] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 27.320678] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 27.320681] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 27.320683] snd_hda_codec_idt hdaudioC0D0: dig-out=0x1e/0x0 [ 27.320685] snd_hda_codec_idt hdaudioC0D0: inputs: [ 27.320688] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18 [ 27.320690] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 27.377246] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 27.377595] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 27.377680] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 27.771521] spl: loading out-of-tree module taints kernel. [ 28.000728] zfs: module license 'CDDL' taints kernel. [ 28.000739] Disabling lock debugging due to kernel taint [ 28.000780] zfs: module license taints kernel. [ 31.179772] ZFS: Loaded module v2.2.2-0ubuntu9, ZFS pool version 5000, ZFS filesystem version 5 [ 42.831916] audit: type=1400 audit(1722324502.304:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="rsyslogd" pid=1487 comm="apparmor_parser" [ 43.149036] i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers [ 43.149045] i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited [ 43.246419] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 43.246428] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled) [ 43.657685] NET: Registered PF_QIPCRTR protocol family [ 46.906692] RTL8211B Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 46.963306] r8169 0000:05:00.0 enp5s0: Link is Down [ 46.983660] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 47.106349] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 57.106936] mtrr: base(0xd1000000) is not aligned on a size(0xe00000) boundary [ 357.330646] ntfs3: Max link count 4000 [ 357.330656] ntfs3: Enabled Linux POSIX ACLs support [ 357.330658] ntfs3: Read-only LZX/Xpress compression included [ 357.493625] ntfs3: sda2: ino=18f76, Correct links count -> 1. [ 357.494828] ntfs3: sda2: ino=18f99, Correct links count -> 1. [ 357.495844] ntfs3: sda2: ino=42, Correct links count -> 1. [ 357.952847] ntfs3: sda2: ino=255, Correct links count -> 1. [ 357.956365] ntfs3: sda2: ino=504, Correct links count -> 1. [ 357.956717] ntfs3: sda2: ino=59b, Correct links count -> 1. [ 357.961694] ntfs3: sda2: ino=150f8, Correct links count -> 1. [ 357.961867] ntfs3: sda2: ino=18699, Correct links count -> 1. [ 357.965943] ntfs3: sda2: ino=1a80b, Correct links count -> 1. [ 358.215311] ntfs3: sda2: ino=1a80c, Correct links count -> 1.

gorillale commented 1 month ago

i have tryed boot with another usb stick, that works on ormal mode. but i sitting on a black screen and waiting... on shutdown no errors

regards

dmesg2.out [ 0.000000] Linux version 6.8.0-38-generic (buildd@lcy02-amd64-049) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #38-Ubuntu SMP PREEMPT_DYNAMIC Fri Jun 7 15:25:01 UTC 2024 (Ubuntu 6.8.0-38.38-generic 6.8.8) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.lz username=mint hostname=mint quiet splash -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bde6afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bde6b000-0x00000000bdebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdebf000-0x00000000bdf82fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf83000-0x00000000bdfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdfbf000-0x00000000bdfdefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdfdf000-0x00000000bdff5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdff6000-0x00000000bdffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdffe000-0x00000000bdffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.2D 11/29/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2393.967 MHz processor [ 0.001628] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001634] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001647] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.001658] MTRR map: 7 entries (3 fixed + 4 variable; max 17), built from 7 variable MTRRs [ 0.001662] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002649] last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.016865] RAMDISK: [mem 0x7ba84000-0x7fffffff] [ 0.017560] ACPI: Early table checksum verification disabled [ 0.017566] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP ) [ 0.017573] ACPI: XSDT 0x00000000BDFFE120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.017582] ACPI: FACP 0x00000000BDFF3000 0000F4 (v04 HP VADER 00000001 MSFT 01000013) [ 0.017591] ACPI: DSDT 0x00000000BDFE4000 00A5B2 (v01 HP VADER 00000001 MSFT 01000013) [ 0.017598] ACPI: FACS 0x00000000BDF8C000 000040 [ 0.017603] ACPI: FACS 0x00000000BDF8C000 000040 [ 0.017608] ACPI: DMAR 0x00000000BDFF5000 000098 (v01 ? 00000001 00000000) [ 0.017613] ACPI: SSDT 0x00000000BDFF4000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.017619] ACPI: HPET 0x00000000BDFF2000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017625] ACPI: APIC 0x00000000BDFF1000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017631] ACPI: MCFG 0x00000000BDFF0000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017636] ACPI: ASF! 0x00000000BDFEF000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017642] ACPI: SLIC 0x00000000BDFE3000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240) [ 0.017648] ACPI: BOOT 0x00000000BDFE2000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.017653] ACPI: SSDT 0x00000000BDFE1000 000296 (v01 INTEL SataAhci 00001000 INTL 20051117) [ 0.017658] ACPI: Reserving FACP table memory at [mem 0xbdff3000-0xbdff30f3] [ 0.017660] ACPI: Reserving DSDT table memory at [mem 0xbdfe4000-0xbdfee5b1] [ 0.017662] ACPI: Reserving FACS table memory at [mem 0xbdf8c000-0xbdf8c03f] [ 0.017664] ACPI: Reserving FACS table memory at [mem 0xbdf8c000-0xbdf8c03f] [ 0.017665] ACPI: Reserving DMAR table memory at [mem 0xbdff5000-0xbdff5097] [ 0.017667] ACPI: Reserving SSDT table memory at [mem 0xbdff4000-0xbdff4654] [ 0.017669] ACPI: Reserving HPET table memory at [mem 0xbdff2000-0xbdff2037] [ 0.017670] ACPI: Reserving APIC table memory at [mem 0xbdff1000-0xbdff106b] [ 0.017672] ACPI: Reserving MCFG table memory at [mem 0xbdff0000-0xbdff003b] [ 0.017673] ACPI: Reserving ASF! table memory at [mem 0xbdfef000-0xbdfef0a4] [ 0.017675] ACPI: Reserving SLIC table memory at [mem 0xbdfe3000-0xbdfe3175] [ 0.017677] ACPI: Reserving BOOT table memory at [mem 0xbdfe2000-0xbdfe2027] [ 0.017678] ACPI: Reserving SSDT table memory at [mem 0xbdfe1000-0xbdfe1295] [ 0.017858] No NUMA configuration found [ 0.017860] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.017874] NODE_DATA(0) allocated [mem 0x13ffd5000-0x13fffffff] [ 0.018222] Zone ranges: [ 0.018223] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018226] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.018229] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.018232] Device empty [ 0.018234] Movable zone start for each node [ 0.018238] Early memory node ranges [ 0.018238] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.018241] node 0: [mem 0x0000000000100000-0x00000000bde6afff] [ 0.018243] node 0: [mem 0x00000000bdebf000-0x00000000bdf82fff] [ 0.018245] node 0: [mem 0x00000000bdfbf000-0x00000000bdfdefff] [ 0.018247] node 0: [mem 0x00000000bdff6000-0x00000000bdffdfff] [ 0.018249] node 0: [mem 0x00000000bdfff000-0x00000000bdffffff] [ 0.018250] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.018253] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.018262] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018321] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.041033] On node 0, zone DMA32: 84 pages in unavailable ranges [ 0.041041] On node 0, zone DMA32: 60 pages in unavailable ranges [ 0.041044] On node 0, zone DMA32: 23 pages in unavailable ranges [ 0.041045] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.049241] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.049711] ACPI: PM-Timer IO Port: 0x408 [ 0.049749] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.049755] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.049759] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.049767] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.049769] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.049778] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.049810] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.049814] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.049816] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.049817] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.049820] PM: hibernation: Registered nosave memory: [mem 0xbde6b000-0xbdebefff] [ 0.049823] PM: hibernation: Registered nosave memory: [mem 0xbdf83000-0xbdfbefff] [ 0.049826] PM: hibernation: Registered nosave memory: [mem 0xbdfdf000-0xbdff5fff] [ 0.049828] PM: hibernation: Registered nosave memory: [mem 0xbdffe000-0xbdffefff] [ 0.049831] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff] [ 0.049833] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xf7ffffff] [ 0.049834] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.049836] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.049837] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.049839] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.049840] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.049842] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.049843] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.049844] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.049846] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.049847] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.049849] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.049850] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffefffff] [ 0.049852] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.049855] [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.049857] Booting paravirtualized kernel on bare hardware [ 0.049863] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.049877] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.051166] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.051178] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.051182] pcpu-alloc: [0] 0 1 2 3 [ 0.051225] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper initrd=/casper/initrd.lz username=mint hostname=mint quiet splash -- [ 0.051422] Unknown kernel command line parameters "splash BOOT_IMAGE=/casper/vmlinuz boot=casper username=mint", will be passed to user space. [ 0.053288] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.054289] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.054424] Fallback order for Node 0: 0 [ 0.054435] Built 1 zonelists, mobility grouping on. Total pages: 1023706 [ 0.054438] Policy zone: Normal [ 0.054455] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.054471] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address 0! BIOS vendor: Hewlett-Packard; Ver: F.2D; Product Version: F.2D [ 0.054478] software IO TLB: area num 4. [ 0.153234] Memory: 3897544K/4160468K available (22528K kernel code, 4440K rwdata, 14300K rodata, 4972K init, 4736K bss, 262664K reserved, 0K cma-reserved) [ 0.203563] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.203724] Kernel/User page tables isolation: enabled [ 0.203865] ftrace: allocating 57844 entries in 226 pages [ 0.218572] ftrace: allocated 226 pages with 4 groups [ 0.220046] Dynamic Preempt: voluntary [ 0.220317] rcu: Preemptible hierarchical RCU implementation. [ 0.220319] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.220322] Trampoline variant of Tasks RCU enabled. [ 0.220323] Rude variant of Tasks RCU enabled. [ 0.220324] Tracing variant of Tasks RCU enabled. [ 0.220325] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.220326] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.226397] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.226682] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.236490] Console: colour VGA+ 80x25 [ 0.236494] printk: legacy console [tty0] enabled [ 0.236805] ACPI: Core revision 20230628 [ 0.237205] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.237227] APIC: Switch to symmetric I/O mode setup [ 0.237231] DMAR: Host address width 36 [ 0.237233] DMAR: DRHD base: 0x00000000000000 flags: 0x1 [ 0.237242] DMAR: Parse DMAR table failure. [ 0.237701] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.242225] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2281f4763a2, max_idle_ns: 440795269614 ns [ 0.242237] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.93 BogoMIPS (lpj=2393967) [ 0.242257] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.242266] CPU0: Thermal monitoring enabled (TM1) [ 0.242289] process: using mwait in idle threads [ 0.242296] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.242298] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.242304] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.242308] Spectre V2 : Mitigation: Retpolines [ 0.242309] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.242311] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.242313] Speculative Store Bypass: Vulnerable [ 0.242316] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.242318] MMIO Stale Data: Unknown: No mitigations [ 0.242322] x86/fpu: x87 FPU will use FXSAVE [ 0.275143] Freeing SMP alternatives memory: 48K [ 0.275154] pid_max: default: 32768 minimum: 301 [ 0.276095] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.276409] landlock: Up and running. [ 0.276411] Yama: becoming mindful. [ 0.276542] AppArmor: AppArmor initialized [ 0.276901] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.276920] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.380424] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.380810] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.380853] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.380886] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.380925] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.380956] ... version: 2 [ 0.380958] ... bit width: 40 [ 0.380959] ... generic registers: 2 [ 0.380960] ... value mask: 000000ffffffffff [ 0.380962] ... max period: 000000007fffffff [ 0.380964] ... fixed-purpose events: 3 [ 0.380965] ... event mask: 0000000700000003 [ 0.381124] signal: max sigframe size: 1440 [ 0.381203] rcu: Hierarchical SRCU implementation. [ 0.381206] rcu: Max phase no-delay instances is 400. [ 0.381824] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.381951] smp: Bringing up secondary CPUs ... [ 0.382224] smpboot: x86: Booting SMP configuration: [ 0.382227] .... node #0, CPUs: #1 [ 0.383344] smp: Brought up 1 node, 2 CPUs [ 0.383344] smpboot: Max logical packages: 2 [ 0.383344] smpboot: Total of 2 processors activated (9575.86 BogoMIPS) [ 0.385583] devtmpfs: initialized [ 0.385583] x86/mm: Memory block size: 128MB [ 0.386993] ACPI: PM: Registering ACPI NVS region [mem 0xbdf83000-0xbdfbefff] (245760 bytes) [ 0.387090] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.387109] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.387769] pinctrl core: initialized pinctrl subsystem [ 0.388011] PM: RTC time: 08:16:55, date: 2024-07-30 [ 0.389362] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.389772] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.389954] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.390136] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.390184] audit: initializing netlink subsys (disabled) [ 0.390353] audit: type=2000 audit(1722327415.153:1): state=initialized audit_enabled=0 res=1 [ 0.390636] thermal_sys: Registered thermal governor 'fair_share' [ 0.390639] thermal_sys: Registered thermal governor 'bang_bang' [ 0.390641] thermal_sys: Registered thermal governor 'step_wise' [ 0.390642] thermal_sys: Registered thermal governor 'user_space' [ 0.390644] thermal_sys: Registered thermal governor 'power_allocator' [ 0.390664] EISA bus registered [ 0.390686] cpuidle: using governor ladder [ 0.390694] cpuidle: using governor menu [ 0.390774] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.390777] Simple Boot Flag at 0x44 set to 0x1 [ 0.390802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.391198] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.391208] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.391241] PCI: Using configuration type 1 for base access [ 0.391479] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.405454] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.405461] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.406819] ACPI: Added _OSI(Module Device) [ 0.406823] ACPI: Added _OSI(Processor Device) [ 0.406825] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.406827] ACPI: Added _OSI(Processor Aggregator Device) [ 0.415086] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.416501] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.434233] ACPI: Dynamic OEM Table Load: [ 0.434233] ACPI: SSDT 0xFFFF921340E94800 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.435046] ACPI: Dynamic OEM Table Load: [ 0.435054] ACPI: SSDT 0xFFFF921340F7A800 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.436268] ACPI: Dynamic OEM Table Load: [ 0.436281] ACPI: SSDT 0xFFFF9213409CE400 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.437081] ACPI: Dynamic OEM Table Load: [ 0.437088] ACPI: SSDT 0xFFFF921340F10840 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.437949] ACPI: _OSC evaluated successfully for all CPUs [ 0.438118] ACPI: EC: EC started [ 0.438120] ACPI: EC: interrupt blocked [ 0.643049] ACPI: EC: EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 0.643054] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC used to handle transactions [ 0.643057] ACPI: Interpreter enabled [ 0.643094] ACPI: PM: (supports S0 S3 S4 S5) [ 0.643097] ACPI: Using IOAPIC for interrupt routing [ 0.644059] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.644062] PCI: Using E820 reservations for host bridge windows [ 0.644380] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.815336] ACPI: _TZ_.FN00: New power resource [ 0.944829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.944840] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.944849] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.944853] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.944855] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.944872] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.945777] PCI host bridge to bus 0000:00 [ 0.945786] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.945789] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.945791] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.945794] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.945801] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.945835] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 conventional PCI endpoint [ 0.945864] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.945867] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.945949] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 PCIe Root Port [ 0.945966] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.945970] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.945974] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 0.945980] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.946014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.946188] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 conventional PCI endpoint [ 0.946261] pci 0000:00:1a.0: BAR 4 [io 0x80e0-0x80ff] [ 0.946445] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 conventional PCI endpoint [ 0.946516] pci 0000:00:1a.1: BAR 4 [io 0x80c0-0x80df] [ 0.946708] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 conventional PCI endpoint [ 0.946733] pci 0000:00:1a.7: BAR 0 [mem 0xdf004c00-0xdf004fff] [ 0.946852] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.946979] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.947003] pci 0000:00:1b.0: BAR 0 [mem 0xdf000000-0xdf003fff 64bit] [ 0.947105] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.947262] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 PCIe Root Port [ 0.947297] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.947303] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.947308] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff] [ 0.947320] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.947391] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.947550] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 PCIe Root Port [ 0.947586] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.947592] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.947597] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff] [ 0.947609] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 0.947681] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.947843] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 PCIe Root Port [ 0.947878] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.947884] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.947889] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff] [ 0.947901] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref] [ 0.947972] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.948134] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 PCIe Root Port [ 0.948169] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.948175] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.948180] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff] [ 0.948192] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 0.948267] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.948427] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 PCIe Root Port [ 0.948463] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.948469] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.948473] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff] [ 0.948486] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 0.948557] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.948717] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 PCIe Root Port [ 0.948752] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 0.948758] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 0.948763] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff] [ 0.948776] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref] [ 0.948848] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.949004] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.949076] pci 0000:00:1d.0: BAR 4 [io 0x80a0-0x80bf] [ 0.949269] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.949341] pci 0000:00:1d.1: BAR 4 [io 0x8080-0x809f] [ 0.949521] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.949592] pci 0000:00:1d.2: BAR 4 [io 0x8060-0x807f] [ 0.949771] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 conventional PCI endpoint [ 0.949841] pci 0000:00:1d.3: BAR 4 [io 0x8040-0x805f] [ 0.950043] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.950068] pci 0000:00:1d.7: BAR 0 [mem 0xdf004800-0xdf004bff] [ 0.950186] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.950321] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge [ 0.950355] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 0.950527] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 conventional PCI endpoint [ 0.950817] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 conventional PCI endpoint [ 0.950836] pci 0000:00:1f.2: BAR 0 [io 0x8108-0x810f] [ 0.950846] pci 0000:00:1f.2: BAR 1 [io 0x8114-0x8117] [ 0.950856] pci 0000:00:1f.2: BAR 2 [io 0x8100-0x8107] [ 0.950866] pci 0000:00:1f.2: BAR 3 [io 0x8110-0x8113] [ 0.950876] pci 0000:00:1f.2: BAR 4 [io 0x8020-0x803f] [ 0.950886] pci 0000:00:1f.2: BAR 5 [mem 0xdf004000-0xdf0047ff] [ 0.950942] pci 0000:00:1f.2: PME# supported from D3hot [ 0.951070] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.951094] pci 0000:00:1f.3: BAR 0 [mem 0xdf005000-0xdf0050ff 64bit] [ 0.951120] pci 0000:00:1f.3: BAR 4 [io 0x8000-0x801f] [ 0.951373] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000 PCIe Endpoint [ 0.951406] pci 0000:01:00.0: BAR 0 [mem 0xd2000000-0xd2ffffff] [ 0.951429] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.951451] pci 0000:01:00.0: BAR 3 [mem 0xd0000000-0xd1ffffff 64bit] [ 0.951468] pci 0000:01:00.0: BAR 5 [io 0x7000-0x707f] [ 0.951486] pci 0000:01:00.0: ROM [mem 0xfff80000-0xffffffff pref] [ 0.951508] pci 0000:01:00.0: enabling Extended Tags [ 0.951560] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.951729] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5.0 GT/s PCIe x16 link) [ 0.951944] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.952068] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000 PCIe Endpoint [ 0.952116] pci 0000:02:00.0: BAR 0 [mem 0xde000000-0xde001fff 64bit] [ 0.952329] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.952574] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.952654] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.952729] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.952901] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 0.952983] pci 0000:05:00.0: BAR 0 [io 0x3000-0x30ff] [ 0.953086] pci 0000:05:00.0: BAR 2 [mem 0xd6010000-0xd6010fff 64bit pref] [ 0.953155] pci 0000:05:00.0: BAR 4 [mem 0xd6000000-0xd600ffff 64bit pref] [ 0.953196] pci 0000:05:00.0: ROM [mem 0xffff0000-0xffffffff pref] [ 0.953486] pci 0000:05:00.0: supports D1 D2 [ 0.953489] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.953874] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.954044] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010 PCIe Endpoint [ 0.954081] pci 0000:06:00.0: BAR 0 [mem 0xda000000-0xda0007ff] [ 0.954101] pci 0000:06:00.0: BAR 1 [mem 0xda000d00-0xda000d7f] [ 0.954156] pci 0000:06:00.0: BAR 4 [mem 0xda000c80-0xda000cff] [ 0.954176] pci 0000:06:00.0: BAR 5 [mem 0xda000c00-0xda000c7f] [ 0.954472] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000 PCIe Endpoint [ 0.954504] pci 0000:06:00.1: BAR 0 [mem 0xda000b00-0xda000bff] [ 0.954840] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501 PCIe Endpoint [ 0.954871] pci 0000:06:00.2: BAR 0 [mem 0xda000a00-0xda000aff] [ 0.955211] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000 PCIe Endpoint [ 0.955245] pci 0000:06:00.3: BAR 0 [mem 0xda000900-0xda0009ff] [ 0.955580] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000 PCIe Endpoint [ 0.955612] pci 0000:06:00.4: BAR 0 [mem 0xda000800-0xda0008ff] [ 0.955981] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.956066] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 0.956100] pci_bus 0000:0a: extended config space not accessible [ 0.956172] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 0.956184] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.956187] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.956190] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.956192] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.956447] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.956551] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.956653] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.956755] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.956856] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.956958] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.957060] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.957161] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.957164] ACPI: PCI: Interrupt link LNKH disabled [ 0.968210] ACPI: EC: interrupt unblocked [ 0.968213] ACPI: EC: event unblocked [ 0.968216] ACPI: EC: EC_CMD/EC_SC=0x66, ECDATA=0x62 [ 0.968218] ACPI: EC: GPE=0x17 [ 0.968221] ACPI: _SB.PCI0.LPC.EC0: Boot DSDT EC initialization complete [ 0.968224] ACPI: _SB.PCI0.LPC.EC0_: EC: Used to handle transactions and events [ 0.968360] iommu: Default domain type: Translated [ 0.968360] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.969382] SCSI subsystem initialized [ 0.969395] libata version 3.00 loaded. [ 0.969395] ACPI: bus type USB registered [ 0.969395] usbcore: registered new interface driver usbfs [ 0.969395] usbcore: registered new interface driver hub [ 0.969395] usbcore: registered new device driver usb [ 0.969395] pps_core: LinuxPPS API ver. 1 registered [ 0.969395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.969395] PTP clock support registered [ 0.969414] EDAC MC: Ver: 3.0.0 [ 0.969665] NetLabel: Initializing [ 0.969668] NetLabel: domain hash size = 128 [ 0.969670] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.969707] NetLabel: unlabeled traffic allowed by default [ 0.970273] mctp: management component transport protocol core [ 0.970273] NET: Registered PF_MCTP protocol family [ 0.970274] PCI: Using ACPI for IRQ routing [ 0.971919] PCI: pci_cache_line_size set to 64 bytes [ 0.972048] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.972051] e820: reserve RAM buffer [mem 0xbde6b000-0xbfffffff] [ 0.972054] e820: reserve RAM buffer [mem 0xbdf83000-0xbfffffff] [ 0.972056] e820: reserve RAM buffer [mem 0xbdfdf000-0xbfffffff] [ 0.972058] e820: reserve RAM buffer [mem 0xbdffe000-0xbfffffff] [ 0.972060] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 0.972256] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.972260] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.972262] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.972267] vgaarb: loaded [ 0.972324] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.972329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.972337] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.974291] clocksource: Switched to clocksource tsc-early [ 0.975981] VFS: Disk quotas dquot_6.6.0 [ 0.976033] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.976311] AppArmor: AppArmor Filesystem Enabled [ 0.976346] pnp: PnP ACPI init [ 1.096831] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff] [ 1.096937] system 00:00: [io 0x0600-0x060f] has been reserved [ 1.096942] system 00:00: [io 0x0610] has been reserved [ 1.096944] system 00:00: [io 0x0800-0x080f] has been reserved [ 1.096947] system 00:00: [io 0x0810-0x0817] has been reserved [ 1.096950] system 00:00: [io 0x0820-0x0823] has been reserved [ 1.096952] system 00:00: [io 0x0400-0x047f] has been reserved [ 1.096955] system 00:00: [io 0x0500-0x053f] has been reserved [ 1.096958] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.096961] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.096964] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.096966] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.096969] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.096973] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.096975] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.096978] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.097461] pnp: PnP ACPI: found 5 devices [ 1.104795] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.105033] NET: Registered PF_INET protocol family [ 1.105204] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.129793] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.129851] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.129902] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.130117] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 1.130282] TCP: Hash tables configured (established 32768 bind 32768) [ 1.130491] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 1.130621] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.130667] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.130816] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.130830] NET: Registered PF_XDP protocol family [ 1.130841] pci 0000:05:00.0: ROM [mem 0xffff0000-0xffffffff pref]: can't claim; no compatible bridge window [ 1.130872] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.130877] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 1.130882] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 1.130886] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.130892] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.130896] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 1.130902] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff] [ 1.130907] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 1.130914] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.130917] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 1.130923] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff] [ 1.130928] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 1.130937] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.130940] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 1.130946] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff] [ 1.130951] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]

[ 1.130967] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.130970] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 1.130976] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff] [ 1.130981] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 1.130990] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 1.130993] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 1.131000] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff] [ 1.131005] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 1.131013] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 1.131016] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] [ 1.131022] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff] [ 1.131027] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref] [ 1.131035] pci 0000:00:1e.0: PCI bridge to [bus 0a] [ 1.131050] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.131052] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.131055] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.131057] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 1.131060] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 1.131063] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff] [ 1.131065] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.131068] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 1.131070] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdeffffff] [ 1.131073] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref] [ 1.131075] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 1.131078] pci_bus 0000:03: resource 1 [mem 0xdd000000-0xddffffff] [ 1.131080] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref] [ 1.131083] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 1.131085] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdcffffff] [ 1.131087] pci_bus 0000:04: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref] [ 1.131090] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 1.131092] pci_bus 0000:05: resource 1 [mem 0xdb000000-0xdbffffff] [ 1.131095] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd6ffffff 64bit pref] [ 1.131097] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 1.131100] pci_bus 0000:06: resource 1 [mem 0xda000000-0xdaffffff] [ 1.131102] pci_bus 0000:06: resource 2 [mem 0xd7000000-0xd7ffffff 64bit pref] [ 1.131105] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 1.131107] pci_bus 0000:07: resource 1 [mem 0xd9000000-0xd9ffffff] [ 1.131109] pci_bus 0000:07: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref] [ 1.131112] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7 window] [ 1.131115] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff window] [ 1.131117] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.131120] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff window] [ 2.333529] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.333851] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x190 took 1173470 usecs [ 3.535529] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.535847] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x190 took 1172117 usecs [ 3.535932] PCI: CLS 64 bytes, default 64 [ 3.535949] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.535951] software IO TLB: mapped [mem 0x00000000b9e6b000-0x00000000bde6b000] (64MB) [ 3.536079] Trying to unpack rootfs image as initramfs... [ 3.536879] Initialise system trusted keyrings [ 3.536908] Key type blacklist registered [ 3.537050] workingset: timestamp_bits=36 max_order=20 bucketorder=0 [ 3.537073] zbud: loaded [ 3.539322] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.540408] fuse: init (API version 7.39) [ 3.540818] integrity: Platform Keyring initialized [ 3.540835] integrity: Machine keyring initialized [ 3.560883] Key type asymmetric registered [ 3.560896] Asymmetric key parser 'x509' registered [ 3.560963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.561097] io scheduler mq-deadline registered [ 3.563620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.563896] Monitor-Mwait will be used to enter C-1 state [ 3.563908] Monitor-Mwait will be used to enter C-2 state [ 3.563915] Monitor-Mwait will be used to enter C-3 state [ 3.563921] ACPI: _PR.CPU0: Found 3 idle states [ 3.709804] ACPI: AC: AC Adapter [AC] (on-line) [ 3.709964] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.710008] ACPI: button: Power Button [PWRB] [ 3.710072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.710105] ACPI: button: Lid Switch [LID0] [ 3.710154] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 3.710230] ACPI: button: Sleep Button [SLPB] [ 3.710330] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.710387] ACPI: button: Power Button [PWRF] [ 3.745592] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.745604] ACPI: thermal: Thermal Zone [THRM] (50 C) [ 3.746158] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.750774] Linux agpgart interface v0.103 [ 3.754153] loop: module loaded [ 3.754643] ACPI: bus type drm_connector registered [ 3.755197] tun: Universal TUN/TAP device driver, 1.6 [ 3.755290] PPP generic driver version 2.4.2 [ 3.755809] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.755829] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.755841] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.755882] uhci_hcd 0000:00:1a.0: irq 16, io port 0x000080e0 [ 3.756008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.756013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.756015] usb usb1: Product: UHCI Host Controller [ 3.756018] usb usb1: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.756020] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.756444] hub 1-0:1.0: USB hub found [ 3.756457] hub 1-0:1.0: 2 ports detected [ 3.756917] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.756926] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2 [ 3.756941] ehci-pci 0000:00:1a.7: debug port 1 [ 3.760940] ehci-pci 0000:00:1a.7: irq 18, io mem 0xdf004c00 [ 3.767568] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.767729] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 3.767733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.767736] usb usb2: Product: EHCI Host Controller [ 3.767739] usb usb2: Manufacturer: Linux 6.8.0-38-generic ehci_hcd [ 3.767741] usb usb2: SerialNumber: 0000:00:1a.7 [ 3.767962] hub 2-0:1.0: USB hub found [ 3.767975] hub 2-0:1.0: 4 ports detected [ 3.789736] hub 1-0:1.0: USB hub found [ 3.789766] hub 1-0:1.0: 2 ports detected [ 3.790072] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.790087] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 3.790111] ehci-pci 0000:00:1d.7: debug port 1 [ 3.794586] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdf004800 [ 3.801630] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.801835] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 3.801840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.801843] usb usb3: Product: EHCI Host Controller [ 3.801848] usb usb3: Manufacturer: Linux 6.8.0-38-generic ehci_hcd [ 3.801850] usb usb3: SerialNumber: 0000:00:1d.7 [ 3.802222] hub 3-0:1.0: USB hub found [ 3.802244] hub 3-0:1.0: 8 ports detected [ 3.802909] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.802935] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.802949] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.803027] uhci_hcd 0000:00:1a.1: irq 17, io port 0x000080c0 [ 3.803166] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.803171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.803174] usb usb4: Product: UHCI Host Controller [ 3.803177] usb usb4: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.803179] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.803443] hub 4-0:1.0: USB hub found [ 3.803460] hub 4-0:1.0: 2 ports detected [ 3.804220] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.804240] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.804254] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.804290] uhci_hcd 0000:00:1d.0: irq 20, io port 0x000080a0 [ 3.804439] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.804445] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.804448] usb usb5: Product: UHCI Host Controller [ 3.804450] usb usb5: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.804453] usb usb5: SerialNumber: 0000:00:1d.0 [ 3.804798] hub 5-0:1.0: USB hub found [ 3.804816] hub 5-0:1.0: 2 ports detected [ 3.805643] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.805661] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.805677] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.805733] uhci_hcd 0000:00:1d.1: irq 22, io port 0x00008080 [ 3.805887] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.805892] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.805895] usb usb6: Product: UHCI Host Controller [ 3.805898] usb usb6: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.805900] usb usb6: SerialNumber: 0000:00:1d.1 [ 3.806196] hub 6-0:1.0: USB hub found [ 3.806210] hub 6-0:1.0: 2 ports detected [ 3.806889] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.806905] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.806919] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.806953] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00008060 [ 3.807167] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.807173] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.807176] usb usb7: Product: UHCI Host Controller [ 3.807178] usb usb7: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.807181] usb usb7: SerialNumber: 0000:00:1d.2 [ 3.807456] hub 7-0:1.0: USB hub found [ 3.807471] hub 7-0:1.0: 2 ports detected [ 3.808259] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.808277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 3.808292] uhci_hcd 0000:00:1d.3: detected 2 ports [ 3.808352] uhci_hcd 0000:00:1d.3: irq 19, io port 0x00008040 [ 3.808668] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08 [ 3.808673] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.808676] usb usb8: Product: UHCI Host Controller [ 3.808679] usb usb8: Manufacturer: Linux 6.8.0-38-generic uhci_hcd [ 3.808681] usb usb8: SerialNumber: 0000:00:1d.3 [ 3.808988] hub 8-0:1.0: USB hub found [ 3.809004] hub 8-0:1.0: 2 ports detected [ 3.809432] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 3.819158] Freeing initrd memory: 71152K [ 3.851653] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.851668] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.851959] mousedev: PS/2 mouse device common for all mice [ 3.854392] rtc_cmos 00:01: RTC can wake from S4 [ 3.854743] rtc_cmos 00:01: registered as rtc0 [ 3.854779] rtc_cmos 00:01: setting system clock to 2024-07-30T08:16:59 UTC (1722327419) [ 3.854832] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.854849] i2c_dev: i2c /dev entries driver [ 3.854966] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 3.855030] device-mapper: uevent: version 1.0.3 [ 3.855133] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.855175] platform eisa.0: Probing EISA bus 0 [ 3.855179] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 3.855182] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 3.855184] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 3.855186] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 3.855188] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 3.855190] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 3.855192] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 3.855194] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 3.855196] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 3.855198] platform eisa.0: EISA: Detected 0 cards [ 3.855202] intel_pstate: CPU model not supported [ 3.855241] ledtrig-cpu: registered to indicate activity on CPUs [ 3.855389] drop_monitor: Initializing network drop monitor service [ 3.855700] NET: Registered PF_INET6 protocol family [ 3.866962] Segment Routing with IPv6 [ 3.866996] In-situ OAM (IOAM) with IPv6 [ 3.867043] NET: Registered PF_PACKET protocol family [ 3.867107] Key type dns_resolver registered [ 3.867425] microcode: Current revision: 0x0000060f [ 3.867539] IPI shorthand broadcast: enabled [ 3.870989] sched_clock: Marking stable (3860002364, 10519980)->(3926368326, -55845982) [ 3.871179] registered taskstats version 1 [ 3.871415] Loading compiled-in X.509 certificates [ 3.872882] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 3.873962] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 3.875017] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 3.875020] blacklist: Loading compiled-in revocation X.509 certificates [ 3.875056] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 3.875083] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 3.875110] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 3.875138] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 3.875164] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 3.875193] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 3.875242] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 3.875273] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 3.882642] Key type .fscrypt registered [ 3.882648] Key type fscrypt-provisioning registered [ 3.883582] ACPI: battery: Slot [BAT0] (battery absent) [ 3.885388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.895268] cryptd: max_cpu_qlen set to 1000 [ 3.933357] Key type encrypted registered [ 3.933368] AppArmor: AppArmor sha256 policy hashing enabled [ 3.933392] ima: No TPM chip found, activating TPM-bypass! [ 3.933403] Loading compiled-in module X.509 certificates [ 3.934536] Loaded X.509 cert 'Build time autogenerated kernel key: cf354f5902ec413d242316b698484ca79c45fa8a' [ 3.934540] ima: Allocated hash algorithm: sha256 [ 3.934557] ima: No architecture policies found [ 3.934574] evm: Initialising EVM extended attributes: [ 3.934576] evm: security.selinux [ 3.934578] evm: security.SMACK64 [ 3.934580] evm: security.SMACK64EXEC [ 3.934581] evm: security.SMACK64TRANSMUTE [ 3.934582] evm: security.SMACK64MMAP [ 3.934583] evm: security.apparmor [ 3.934585] evm: security.ima [ 3.934586] evm: security.capability [ 3.934587] evm: HMAC attrs: 0x1 [ 3.935087] PM: Magic number: 0:827:271 [ 3.941527] RAS: Correctable Errors collector initialized. [ 3.941657] clk: Disabling unused clocks [ 3.945008] Freeing unused decrypted memory: 2028K [ 3.947132] Freeing unused kernel image (initmem) memory: 4972K [ 3.947217] Write protecting the kernel read-only data: 36864k [ 3.947455] Freeing unused kernel image (rodata/data gap) memory: 36K [ 4.006706] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.006743] x86/mm: Checking user space page tables [ 4.065151] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.065183] Run /init as init process [ 4.065187] with arguments: [ 4.065189] /init [ 4.065191] splash [ 4.065193] with environment: [ 4.065195] HOME=/ [ 4.065196] TERM=linux [ 4.065197] BOOT_IMAGE=/casper/vmlinuz [ 4.065199] boot=casper [ 4.065200] username=mint [ 4.065282] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 4.193665] usb 3-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 4.193676] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.193679] usb 3-2: Product: SanDisk 3.2Gen1 [ 4.193681] usb 3-2: Manufacturer: USB [ 4.193683] usb 3-2: SerialNumber: 010103484be7989b9c7d539e7df2f8df2545adf897066f5431e15b58a3fa7bf84077000000000000000000006f4a7bdfff990e009155810751af485b [ 4.200780] usb-storage 3-2:1.0: USB Mass Storage device detected [ 4.203554] scsi host0: usb-storage 3-2:1.0 [ 4.204139] usbcore: registered new interface driver usb-storage [ 4.207854] usbcore: registered new interface driver uas [ 4.248550] usb 1-2: new full-speed USB device number 2 using uhci_hcd [ 4.267899] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799AC3-9429-4529-927E-DFE13736EEBA has zero instances [ 4.267908] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799AC5-9429-4529-927E-DFE13736EEBA has zero instances [ 4.267911] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799ACA-9429-4529-927E-DFE13736EEBA has zero instances [ 4.267913] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: A1799ACB-9429-4529-927E-DFE13736EEBA has zero instances [ 4.272318] ACPI: video: Video Device [EVGA] (multi-head: yes rom: no post: no) [ 4.272618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 4.307916] usb 3-5: new high-speed USB device number 3 using ehci-pci [ 4.308148] sdhci: Secure Digital Host Controller Interface driver [ 4.308150] sdhci: Copyright(c) Pierre Ossman [ 4.322431] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0) [ 4.322474] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.322591] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0) [ 4.322679] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface. [ 4.322727] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 4.323862] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA [ 4.326051] ahci 0000:00:1f.2: version 3.0 [ 4.326513] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.326572] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 4.326577] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 4.331181] r8169 0000:05:00.0 eth0: RTL8168c/8111c, 00:23:5a:1e:a7:9e, XID 3c2, IRQ 24 [ 4.331192] r8169 0000:05:00.0 eth0: jumbo features [frames: 6122 bytes, tx checksumming: ko] [ 4.332929] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 4.336496] scsi host1: ahci [ 4.336725] scsi host2: ahci [ 4.337139] scsi host3: ahci [ 4.337332] scsi host4: ahci [ 4.337567] scsi host5: ahci [ 4.337764] scsi host6: ahci [ 4.337849] ata1: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004100 irq 25 lpm-pol 3 [ 4.337854] ata2: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004180 irq 25 lpm-pol 3 [ 4.337856] ata3: DUMMY [ 4.337858] ata4: DUMMY [ 4.337861] ata5: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004300 irq 25 lpm-pol 3 [ 4.337864] ata6: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004380 irq 25 lpm-pol 3 [ 4.378591] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 4.388993] usb 1-2: New USB device found, idVendor=138a, idProduct=0001, bcdDevice= 3.72 [ 4.389001] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.460527] usb 3-5: New USB device found, idVendor=064e, idProduct=c107, bcdDevice= 1.00 [ 4.460538] usb 3-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 4.460541] usb 3-5: Product: HP Webcam [ 4.460543] usb 3-5: Manufacturer: SuYin [ 4.460546] usb 3-5: SerialNumber: CN0314-MM00-MI06-VH-R53.90.01 [ 4.557544] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2281f4763a2, max_idle_ns: 440795269614 ns [ 4.557584] clocksource: Switched to clocksource tsc [ 4.797561] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.798150] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.798183] ata1.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 4.798210] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 4.798242] ata1.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 4.798395] ata1.00: supports DRM functions and may not be fully accessible [ 4.798400] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 [ 4.798812] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 4.799143] ata1.00: Features: Trust NCQ-sndrcv [ 4.799684] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.799722] ata1.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 4.799729] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 4.799759] ata1.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 4.799787] ata1.00: supports DRM functions and may not be fully accessible [ 4.800595] ata1.00: configured for UDMA/133 [ 4.810900] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 4.811384] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.811436] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 4.811452] sd 1:0:0:0: [sda] Write Protect is off [ 4.811456] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.811478] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.811582] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.812680] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 4.813509] sd 1:0:0:0: [sda] supports TCG Opal [ 4.813514] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.885738] firewire_core 0000:06:00.0: created device fw0: GUID 8c3f020087c940d9, S400 [ 4.941752] psmouse serio1: synaptics: queried max coordinates: x [..5608], y [..4638] [ 4.953540] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 4.999674] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000/0x0, board id: 0, fw id: 509933 [ 5.059222] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 5.085861] usb 2-3: New USB device found, idVendor=07ca, idProduct=a309, bcdDevice= 2.00 [ 5.085868] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.085872] usb 2-3: Product: A309 [ 5.085875] usb 2-3: Manufacturer: AVerMedia [ 5.085879] usb 2-3: SerialNumber: 301161402613000 [ 5.245630] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 496033212 wd_nsec: 8619276096 [ 5.263336] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 5.264424] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 5.271160] sd 0:0:0:0: [sdb] 30081024 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 5.272271] sd 0:0:0:0: [sdb] Write Protect is off [ 5.272282] sd 0:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 5.273314] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.280691] sdb: sdb1 sdb2 [ 5.281214] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 5.285558] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.287059] ata2.00: ACPI cmd 00/00:00:00:00:00:b0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.287158] ata2.00: ACPI cmd ef/10:03:00:00:00:b0(SET FEATURES) filtered out [ 5.287210] ata2.00: ACPI cmd ef/10:04:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.287261] ata2.00: ACPI cmd ef/10:05:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.289095] ata2.00: ATA-9: WDC WDS250G1B0A-00H9H0, X41110WD, max UDMA/133 [ 5.289153] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.289815] ata2.00: Features: Dev-Sleep [ 5.291217] ata2.00: ACPI cmd 00/00:00:00:00:00:b0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.291229] ata2.00: ACPI cmd ef/10:03:00:00:00:b0(SET FEATURES) filtered out [ 5.291293] ata2.00: ACPI cmd ef/10:04:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.291356] ata2.00: ACPI cmd ef/10:05:00:00:00:b0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.292396] ata2.00: configured for UDMA/133 [ 5.292674] scsi 2:0:0:0: Direct-Access ATA WDC WDS250G1B0A- 10WD PQ: 0 ANSI: 5 [ 5.293358] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.293579] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 5.293713] sd 2:0:0:0: [sdc] Write Protect is off [ 5.293718] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.293743] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.293775] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 5.296167] sdc: [ 5.296233] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.749556] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 503926091 wd_nsec: 40891135249 [ 5.765701] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.768032] ata5.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.768169] ata5.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.768317] ata5.00: ACPI cmd ef/10:02:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.768331] ata5.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.768460] ata5.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.768587] ata5.00: ACPI cmd ef/10:05:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.768604] ata5.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100 [ 5.770828] ata5.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04) [ 5.771008] ata5.00: ACPI cmd ef/10:01:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.771213] ata5.00: ACPI cmd ef/10:02:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.771230] ata5.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 5.771376] ata5.00: ACPI cmd ef/10:04:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.771512] ata5.00: ACPI cmd ef/10:05:00:00:00:a0(SET FEATURES) rejected by device (Stat=0x51 Err=0x04) [ 5.771580] ata5.00: configured for UDMA/100 [ 5.784012] scsi 5:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.83 PQ: 0 ANSI: 5 [ 5.802506] sr 5:0:0:0: [sr0] scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.802553] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.816954] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 5.817674] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 6.124694] ata6: SATA link down (SStatus 0 SControl 300) [ 6.757556] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 6.757579] clocksource: 'hpet' wd_nsec: 0 wd_now: 12cf5a8d wd_last: 65ea791c mask: ffffffff [ 6.757588] clocksource: 'tsc' cs_nsec: 504016220 cs_now: 1352cac117 cs_last: 130adf86a6 mask: ffffffffffffffff [ 6.757597] clocksource: Clocksource 'tsc' skewed 504016220 ns (504 ms) over watchdog 'hpet' interval of 0 ns (0 ms) [ 6.757606] clocksource: 'tsc' is current clocksource. [ 6.757635] tsc: Marking TSC unstable due to clocksource watchdog [ 6.757681] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 6.757687] sched_clock: Marking unstable (6747160512, 10519993)<-(6813526849, -55845982) [ 6.757978] clocksource: Checking clocksource tsc synchronization from CPU 0 to CPUs 1. [ 6.758077] clocksource: Switched to clocksource hpet [ 7.542542] raid6: sse2x4 gen() 3017 MB/s [ 7.559527] raid6: sse2x2 gen() 6874 MB/s [ 7.576537] raid6: sse2x1 gen() 7775 MB/s [ 7.576540] raid6: using algorithm sse2x1 gen() 7775 MB/s [ 7.593536] raid6: .... xor() 4869 MB/s, rmw enabled [ 7.593538] raid6: using ssse3x2 recovery algorithm [ 7.595411] xor: measuring software checksum speed [ 7.596185] prefetch64-sse : 12985 MB/sec [ 7.597068] generic_sse : 11691 MB/sec [ 7.597070] xor: using function: prefetch64-sse (12985 MB/sec) [ 7.598706] async_tx: api initialized (async) [ 9.736547] random: crng init done [ 10.087281] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 10.088538] ISO 9660 Extensions: RRIP_1991A [ 10.473850] sdb: sdb1 sdb2 sdb3 [ 10.485925] sdb: sdb1 sdb2 sdb3 [ 15.441162] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 15.442410] ISO 9660 Extensions: RRIP_1991A [ 15.484006] loop0: detected capacity change from 0 to 4798088 [ 15.513030] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 15.543176] EXT4-fs (sdb3): mounted filesystem bea52e96-7600-4b26-a221-8bc635eaeecd r/w with ordered data mode. Quota mode: none. [ 15.885655] evm: overlay not supported [ 29.005175] systemd[1]: Inserted module 'autofs4' [ 29.126556] systemd[1]: systemd 255.4-1ubuntu8.2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 29.126588] systemd[1]: Detected architecture x86-64. [ 29.160299] systemd[1]: Initializing machine ID from random generator. [ 29.592815] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 29.655143] systemd[1]: Queued start job for default target graphical.target. [ 29.689511] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 29.690113] systemd[1]: Created slice user.slice - User and Session Slice. [ 29.690253] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 29.690610] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 29.690670] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 29.690745] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 29.690790] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 29.690827] systemd[1]: Reached target slices.target - Slice Units. [ 29.690870] systemd[1]: Reached target swap.target - Swaps. [ 29.690918] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 29.691095] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 29.693371] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 29.694070] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 29.697708] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 29.697847] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 29.698069] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 29.698309] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 29.698365] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 29.700663] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 29.700967] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 29.712715] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 29.715704] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 29.718187] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 29.729830] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 29.738851] systemd[1]: Starting systemd-journald.service - Journal Service... [ 29.739096] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 29.749828] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 29.756600] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 29.759258] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 29.775813] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 29.791084] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 29.809895] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 29.815991] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 29.818973] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 29.822261] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 29.922894] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 29.922946] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 29.931055] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 29.931182] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 29.933035] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 29.937266] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 29.937575] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 29.937810] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 29.938150] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 29.938742] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 29.944494] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 29.956904] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 29.957517] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 29.957891] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 29.958395] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 29.959141] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 29.959769] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 29.960403] systemd-journald[902]: Collecting audit messages is disabled. [ 29.960645] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 29.962133] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 29.963580] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 29.976784] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 30.003694] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 30.056703] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 30.075996] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 30.082927] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 30.083323] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 30.084655] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 30.084967] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 30.085215] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 30.133059] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because no trigger condition checks were met. [ 30.133169] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 30.141803] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 30.141863] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 30.213807] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 30.231851] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 30.240700] systemd[1]: Started systemd-journald.service - Journal Service. [ 30.256483] lp: driver loaded but no devices found [ 30.286667] ppdev: user-space parallel port driver [ 30.379675] systemd-journald[902]: Received client request to flush runtime journal. [ 31.895119] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0 [ 31.895128] ene_ir: PLL freq = 1406 [ 31.895130] ene_ir: KB3926C detected [ 31.895143] ene_ir: Firmware regs: 00 00 [ 31.895145] ene_ir: Hardware features: [ 31.895146] ene_ir: * Uses GPIO 40 for IR demodulated input [ 31.977544] Registered IR keymap rc-rc6-mce [ 32.008306] hp_accel: hardware type DV7 found [ 32.009071] lis3lv02d: 8 bits sensor found [ 32.044657] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 [ 32.056291] IR RC6 protocol handler initialized [ 32.083813] rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0 [ 32.084091] rc rc0: lirc_dev: driver ene_ir registered at minor = 0, raw IR receiver, no transmitter [ 32.084153] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8 [ 32.089549] ene_ir: driver has been successfully loaded [ 32.089578] rc rc0: nonsensical timing event of duration 0 [ 32.089582] rc rc0: two consecutive events of type space [ 32.102754] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20230628/utaddress-204) [ 32.102768] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 32.102773] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20230628/utaddress-204) [ 32.102779] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 32.102781] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20230628/utaddress-204) [ 32.102786] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 32.102788] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 32.184640] mc: Linux media interface: v0.10 [ 32.306412] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 32.306982] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 32.307315] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 32.319925] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 32.337856] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 32.339225] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 32.415568] i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers [ 32.415578] i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited [ 32.454481] videodev: Linux video capture interface: v2.00 [ 32.494876] usb 2-3: dvb_usb_v2: found a 'AVerMedia A309' in cold state [ 32.557584] Intel(R) Wireless WiFi driver for Linux [ 32.557847] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 32.558264] intel_powerclamp: No package C-state available [ 32.560046] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1 [ 32.560059] iwlwifi 0000:02:00.0: PCI dev 4237/1211, rev=0x54, rfid=0xd55555d5 [ 32.575692] at24 0-0050: supply vcc not found, using dummy regulator [ 32.576131] usb 3-5: Found UVC 1.00 device HP Webcam (064e:c107) [ 32.576667] usb 2-3: Direct firmware load for dvb-usb-af9015.fw failed with error -2 [ 32.576675] usb 2-3: dvb_usb_v2: Did not find the firmware file 'dvb-usb-af9015.fw' (status -2). You can use /scripts/get_dvb_firmware to get the firmware [ 32.576931] dvb_usb_af9015: probe of 2-3:1.0 failed with error -2 [ 32.576966] usbcore: registered new interface driver dvb_usb_af9015 [ 32.579918] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 32.600604] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode op_mode iwldvm [ 32.614692] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb3/3-5/3-5:1.0/input/input11 [ 32.618621] usbcore: registered new interface driver uvcvideo [ 32.911660] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 32.911671] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 32.911673] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 32.911675] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 32.918007] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled) [ 32.918049] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio. [ 32.950000] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 32.999012] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 33.519777] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 33.525172] Console: switching to colour dummy device 80x25 [ 33.525646] nouveau 0000:01:00.0: NVIDIA G96 (096480c1) [ 33.556373] nouveau 0000:01:00.0: bios: version 62.94.4a.00.10 [ 33.578657] nouveau 0000:01:00.0: bios: M0203T not found [ 33.578667] nouveau 0000:01:00.0: bios: M0203E not matched! [ 33.578669] nouveau 0000:01:00.0: fb: 512 MiB DDR2 [ 33.607200] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 33.607212] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 33.607216] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 33.607218] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 33.607221] snd_hda_codec_idt hdaudioC0D0: dig-out=0x1e/0x0 [ 33.607223] snd_hda_codec_idt hdaudioC0D0: inputs: [ 33.607226] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18 [ 33.607228] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 33.672623] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 33.672636] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 33.672641] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 33.676784] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 33.735635] nouveau 0000:01:00.0: DRM: Skipping nv_backlight registration [ 33.744772] acpi device:06: registered as cooling_device3 [ 33.744929] [drm] Initialized nouveau 1.4.0 20120801 for 0000:01:00.0 on minor 0 [ 33.798244] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 33.798347] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 33.798435] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 33.824232] fbcon: nouveaudrmfb (fb0) is primary device [ 35.222116] Console: switching to colour frame buffer device 180x56 [ 35.232538] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 35.491746] spl: loading out-of-tree module taints kernel. [ 35.721072] zfs: module license 'CDDL' taints kernel. [ 35.721083] Disabling lock debugging due to kernel taint [ 35.721122] zfs: module license taints kernel. [ 38.863584] ZFS: Loaded module v2.2.2-0ubuntu9, ZFS pool version 5000, ZFS filesystem version 5 [ 51.028205] audit: type=1400 audit(1722327466.668:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="rsyslogd" pid=1585 comm="apparmor_parser" [ 52.906005] NET: Registered PF_QIPCRTR protocol family [ 56.052763] RTL8211B Gigabit Ethernet r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 56.113960] r8169 0000:05:00.0 enp5s0: Link is Down [ 59.070268] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control off [ 69.706974] systemd-journald[902]: Time jumped backwards, rotating. [ 107.083612] CE: hpet increased min_delta_ns to 20115 nsec

bitfarago commented 1 month ago

Maybe it's some kind of filesystem problem. Try running chkdsk /f c: in Windows, then sudo ntfsfix -d /dev/sda2 in Mint.

gorillale commented 1 month ago

LOL, what wrong with Min22, 8 Minutes Bootup on Installed Pavillion DV7 with SSD this is 10 times longer as Win10 Bootup, what a shame. Mint 21.3 has 1 Minute to Bootup.

Now i will be back to 21.3 no future, and i will not buy a new lt. Sorry, and thank you for try to help.

nemo701 commented 2 weeks ago

Hi, I also tried to upgrade to Mint 22, but Mintupgrade ran into an infinite loop when installing the 6.8 kernel:

dkms: autoinstall for kernel 6.8.0-39-generic fail dkms autoinstall on 6.8.0-39-generic/x86_64 failed for nvidia(10)

I think, the problem was the nVidia driver (official v545). I had to break the script, switch back to X.org nvidia driver, reboot with the original kernel, and run Mintupgrade again. After the successful upgrade I reinstalled the driver (v535 is the latest offered) and now works fine.

Using Cinnamon, X11.

Just reporting that I had a similar problem when I tried to update from 21.3 to 22 this evening - I was using the 545 nvidia driver, but during the upgrade, compiling the kernel would repeatedly fail (a message along the lines of "generic kernel ... is not configured yet" - sorry, I didn't keep a record of exactly what it said). I used Timeshift to roll back, switched to the 535 driver, and performed the upgrade again, and this time it worked. I'm using kernel 6.8.0-41.

I can see that the 535 driver is the only one offered in the Mint Driver Manager, which may not be a coincidence...!