Open cheshirecatt opened 4 months ago
659 should have the description for your tablet, can you give that a try please?
Well I have a couple of doubts, the working area of the tablet is 9x5.63 inches but looking at other .tablet files I see that only whole numbers are used, I don't know if it is ok to round it as 6 in the height or on the contrary it is better to use 5.
Width=9
Height=6
And well the other thing is that I don't know the codes of the buttons so I will leave them as they are in the file.
Update: I tested with evtest and the codes are correct.
[Buttons]
Left=A;B;C;D;E;F;G;H;I;J;K
EvdevCodes=BTN_0;BTN_1;BTN_2;BTN_3;BTN_4;BTN_5;BTN_6;BTN_7;BTN_8;BTN_9;BTN_SOUTH
I hope this helps and an apology in advance.
[Device]
Name=INSPIROY Ink H320M
ModelName=H320M
Class=Bamboo
DeviceMatch=usb|256c|006d
Width=9
Height=6
Layout=
Styli=@generic-no-eraser;
IntegratedIn=
[Features]
NumStrips=0
Reversible=true
Ring=false
Stylus=true
Touch=false
TouchSwitch=false
[Buttons]
Left=A;B;C;D;E;F;G;H;I;J;K
EvdevCodes=BTN_0;BTN_1;BTN_2;BTN_3;BTN_4;BTN_5;BTN_6;BTN_7;BTN_8;BTN_9;BTN_SOUTH
I also tried to make the tablet layout
Well I have a couple of doubts,
that's actually "good" because the ones in #659 are autogenerated so if you spot any errors it means we know the file was properly reviewed :)
Can you file a PR with your corrected tablet file and the svg please? We can remove it from #659 then.
Well I have a couple of doubts,
that's actually "good" because the ones in #659 are autogenerated so if you spot any errors it means we know the file was properly reviewed :)
Can you file a PR with your corrected tablet file and the svg please? We can remove it from #659 then.
All right, I just correct the svg file and do the PR.
ftr, #659 has been merged now so if you get to do this one please base it top of the current master
branch, thanks
Device name:
HUION Inspiroy Ink H320M
Device model identifier:
H320M
libwacom version:
2.10.0
[x] I understand that libwacom does affect whether the device works (see Troubleshooting)
[ ] udevadm info output:
[x] sysinfo issue in wacom-hid-descriptors: https://github.com/linuxwacom/wacom-hid-descriptors/issues/372
The tablet works very well, I just can't map the buttons since it is not recognized by libwacom.